Pinning mechanism in carbon nanotube doping of MgB2 superconductor

MgB_1.9C_0.1 samples are synthesized under the ambient pressure (AP) and high pressure (HP), respectively. The further studies demonstrate different field-dependence of the critical current density J_c(H) in each sample. In the view of two-gap superconductivity in these samples, δT_c pinning (resulting from the spatial fluctuations of the transition temperature) is dominant in the AP sample, while in the HP sample, both δT_c and δl pinning (due to the mean-free-path fluctuations) act together and their contributions vary with temperature. Besides the improvement of H_c2(0), due to the different pinning mechanism, J_c(H) of the HP sample shows a slower decay with the increasing fields than that of the AP sample in high fields, which suggests a possible method of retarding the rapid decay of J_c(H) under elevated fields.     

Influence of magnetic impurities on superconducting property of polycrystalline iron-based NdFeAsO0.88F0.12

Polycrystalline iron-based superconducting NdFeAsO_0.88F_0.12 was prepared via solid-state reaction in ambient pressure. Small amounts of ferromagnetic impurities were detected by Scanning Electron Microscopy (SEM) analysis. To study the influence of magnetism on superconducting properties of the sample, magnetization M(T, H) measurements were performed in fields up to 1.5 T and in the temperature range of 5-60 K. The abnormal behavior was observed in the χ(T) curves, and the magnetization hysteresis loops (MHLs) can be described by a sum of the contributions of superconductive hysteresis, ferromagnetic hysteresis of the impurities and the paramagnetic background of the isolated Nd³⁺ ions. The influence of the ferromagnetic impurities and the paramagnetic background were investigated and discussed. After the corrections of the magnetism contributions, the intrinsic superconductive MHLs as well as the critical current density were obtained.     

Magnetization and characteristic fields in Nd0.8Ba0.2FeAsO0.6F0.4 with binary doping

In the present work, the iron oxypnictide superconductor of the namely Nd_0.8Ba_0.2FeAsO_0.6F_0.4 is prepared with respect to the observation of distinct magnetization characteristics arising from both electron and hole doping. A magnetothermal phase diagram is given for the present iron oxypnictide system, based on the irreversibility fields (H_irr) and the upper critical fields (H_c2) obtained from magnetotransport measurements, as well as the lower critical fields (H_c1) evaluated by magnetization loops at various temperatures. High H_c2(0) are revealed at low temperature range, which is in consistent with the observations of comparatively high critical current (J_c) and the temperature dependent peak effect in the J_c vs H curves.     

Critical current density of a sample of melt grown Y1.2Ba1.8Cu2.4O x

Melt grown samples of Y_1.2Ba_1.8Cu_2.4O _x have been prepared and studied for their current carrying capacity. The composition was chosen to include Y₂BaCuO₅ (211) particles in the YBa₂Cu₃O _x (123) phase. The critical current density (J _c) of these samples was studied as a function of magnetic field using magnetization technique. The micrographic investigation shows well aligned grains in this material. The magnetic hysteresis measurements were done using a MPMS SQUID magnetometer up to the fields of 5.5 T. TheJ _c was estimated from the remanent magnetization using Bean model. Isothermal magnetization hysteresis loops at low fields reveal the presence of only one kind of hysteresis loops (corresponding to intragrain magnetizations). This is a valid proof that the weak links are greatly eliminated in these samples prepared by MG process. TheJ _c behaviour as a function of magnetic field has two components, a rapidly decaying exponential function of field and the other component that predominates at higher fields. This could be explained if we assume that the sample contains two phases of superconductors, one having a lowH _c2 becoming normal at fairly medium fields of the order of a few kilogauss will act as pinning centres for the other phase having higherH _c2 and hence higherJ _c at high fields.     

Effective pinning barriers of NdFeAsO0.88F0.12 superconductor

Resistivities of polycrystalline iron-based NdFeAsO_0.88F_0.12 superconductors prepared via solid-state reaction in ambient pressure (AP) and high pressure (HP) were measured in various magnetic fields ranging from 0 to 9 T. Different resistivity broadening behaviors of the AP and HP samples, which may originate from the anisotropic superconductivity, the vortex motion, or the connectivity, were investigated in detail. The effective pinning barriers of both the AP and HP samples were obtained from the Arrhenius plot of the resistivity data by two analytic methods of which one assuming the prefactor 2ρ_cU/T of the thermally activated ?ux ?ow (TAFF) resistivity ρ=(2ρ_cU/T)exp(−U/T) is a constant, while the other assuming the prefactor is temperature dependent. The results determined from the two methods were compared and analysed, and the true effective pinning barriers were obtained. The origin of different pinning barriers of the AP and HP samples is discussed.     

Effect of sorbic acid doping on flux pinning in bulk MgB2 with the percolation model

In this paper, we study the doping effect of sorbic acid (C₆H₈O₂), from 0 to 20 wt.% of the total MgB₂, on critical temperature (T_c), critical current density (J_c), irreversibility field (H_irr) and crystalline structure. The XRD patterns of samples show a slightly decrease in a-axis lattice parameter for doped samples, due to the partial substitution of carbon at boron site. On the other hand, we investigate the influence of doping on the behavior of flux pinning and J_c(B) in the framework of percolation theory and it is found that the J_c(B) behavior could be well fitted in high field region. The two key parameters, anisotropy and percolation threshold, play very important roles. It is believed that the enhancement of J_c is due to the reduction of anisotropy in high field region.     

Electrical,structural, magnetic and transport properties of Zn2BaFe16O27 doped with Cu

Series of polycrystalline samples of Zn_2−xCu_xBaFe₁₆O₂₇ were prepared by usual ceramic methods, where x=0.0, 0.4, 0.6, 0.8, 1.0, 1.4. X-ray analysis done at room temperature using CoK_α with λ=1.790 Å confirms the presence of W-type hexaferrite phase structure. Saturation magnetization and hysteresis loops curves measurements at room temperature were studied as a function of Cu²⁺ substitution. It can be seen that the Cu²⁺ content slightly decreases the saturation magnetization from 25 to 20 emu g⁻¹; all hysteresis loops are closed, which indicates low anisotropy field and low saturation magnetization field. The dc conductivity and thermoelectric power were measured in a range from room temperature up to T=750 K for all samples. The thermoelectric power decreases on increasing Cu²⁺ content, and the conductivity increases with temperature. The value of the charge-carrier concentration increases by increasing the temperature and Cu²⁺ content.     

Dependence of magnetic properties and microstructure of mechanically alloyed Ni0.5Zn0.5Fe2O4 on soaking time

Possible soaking-time effects on the magnetic and microstructural properties of polycrystalline samples of Ni_0.5Zn_0.5Fe₂O₄ have been studied. Nanosize powder produced by mechanical alloying was sintered at 800 °C with various soaking times. All samples showed the signature peak of Ni_0.5Zn_0.5Fe₂O₄ even with one hour of soaking time. The size distributions show a slow growth of microstructural evolution related to density, porosity and also to the magnetic hysteresis loops. Within these distributions it is observed that the formation of multi-domains is not possible and probably there are the regions of superparamagnetic and single-domain grains. From the permeability studies, it is believed that the rise of the magnetic moment on the B sites give rise to the total saturation magnetization with increase of soaking time. The hysteresis loop of one-hour soaking time showed paramagnetic behavior dominating while longer soaking times showed ferromagnetic behavior starting to dominate. The coercivity was observed to increase with soaking time, signaling the increase of the anisotropy fields which was attributed to the shape anisotropy and also to the magnetocrystalline anisotropy. By correlating the morphology, phase analysis, permeability and hysteresis loops results, it is believed that there was an increase in number of crystalline-growth regions which together formed a total mass of mixed superparamagnetic and ferromagnetic grains with the latter starting to dominate the samples.     

Asymmetrical phase separation in Nd0.25La0.25Ca0.5MnO3

The highly metastable region across the metal-insulator transition in Nd_0.25La_0.25Ca_0.5MnO₃ is probed by transport and magnetic measurements. The metal-insulator transition observed around 130 K is associated with large thermal hysteresis between temperatures 50-150 K. Observation of minor hysteresis loops across the region indicates coexistence of both metallic and insulating phases. The field-cooled heating and the zero-field-cooled heating susceptibilities deviate from each other from 205 K, signifying thermo-magnetic irreversibility arising from magnetic pinning and/or glassy magnetic behaviour. The magnetoresistance measured on the heating and cooling loops are found to be different in magnitude and nature. The cooling-cycle magnetoresistance was found to be highly irreversible with an open-ended hysteresis loop. We also observe change in the nature of the magnetic relaxation data on the heating and cooling protocols. This indicate strong thermal history dependence of magneto-transport behaviour in the present compound.     

Anisotropy of quasistatic magnetization-reversal processes in (210)-oriented iron-garnet films

An experimental study is made of the effect of an in-plane field H _p of various orientations on the domain structure and shape of the hysteresis loops of epitaxial iron garnet films with the (210) orientation. The characteristic of the magnetization reversal process (in fields somewhat lower than the anisotropy field) is taken to be the critical fields H _p1, H _p2, and H _p3, for which the magnetization reversal processes is interrupted at distinct stages. A method is proposed for constructing the phase diagram of the magnetic states of films, using measurements of the critical fields H _p for different amplitudes of the magnetization reversal field H _z . Two directions in the plane of the film are determined with an accuracy of a fraction of a degree from the hysteresis loops, where in the corresponding field Hp the transition from a single-domain state to a multidomain state occurs as a second-order phase transition. The characteristic changes in the shape of the hysteresis loop are consistent with the features in the reorganization of the domain structure of the (210) film. The preferential orientations of the stripe domain structure of the samples are determined relative to the crystal axes as determined by x-ray methods. Zh. Tekh. Fiz. 67, 32–35 (June 1997) Deceased     

Robust superconductivity and transport properties in (Li1-xFex)OHFeSe single crystals

The recently discovered (Li_1-xFe_x)OHFeSe superconductor with T_c about 40 K provides a good platform for investigating the magnetization and electrical transport properties of FeSe-based superconductors. By using a hydrothermal ion-exchange method, we have successfully grown crystals of (Li_1-xFe_x)OHFeSe. X-ray diffraction on the sample shows the single crystalline PbO-type structure with the c-axis preferential orientation. Magnetic susceptibility and resistive measurements show an onset superconducting transition at around T_c=38.3 K. Using the magnetization hysteresis loops and Bean critical state model, a large critical current J_s is observed in low temperature region. The critical current density is suppressed exponentially with increasing magnetic field. Temperature dependencies of resistivity under various currents and fields are measured, revealing a robust superconducting current density and bulk superconductivity.     

Effect of polymers doping on flux pinning behavior of MgB2

The effects of polymers doping on irreversibility field (H_irr) and critical current density (J_c) of MgB₂ have been investigated in this work. It is found that both J_c, and H_irr, are improved by doping at relative lower temperature region. The J_c−B curves of all samples studied in this work are well fitted using J_c(B) formula in percolation model. The values of upper critical field anisotropy (γ) are obtained from the fitting result at various temperatures. It is observed that values of γ for polymers doping samples are reduced at these temperatures. This is considered to be responsible for the enhancement of values of J_c for doped samples. Moreover, the percolation threshold, p_c, is found to be enhanced with increasing temperature. It is believed that the grain boundary pinning is still dominating in MgB₂, while the deviation of experimental data from the theoretical values is due to the percolation of suppercurrent in polycrystalline MgB₂.     

Compensation effect in an exchange enhanced superconductor: [(La.993Lu.007)1−xGdx]Ru2

We have measured the upper critical field, H_c2, of alloys of the form [(La_.993Lu_.007)_1?xGd_x]Ru₂. For large $\text{(x?0.02)}$ concentrations of Gd, the critical fields are re-entrant. For small (x?0.01) concentrations of Gd, the critical fields cross the pure sample critical fields and rise above them due to compensation of the externally applied magnetic field by the negative effective internal field of the magnetic impurity. Compensation occurs at relatively low fields (25 KG) in this system as a result of substantial exchange enhancement. From the concentration and critical field of the most compensated sample, we find a value for the exchange integral, J(0) = ?(15+?2) meV, and a susceptibility enhancement factor in excellent agreement with EPR, specific heat and static susceptibility measurements.     

Study of the critical current density and the thermodynamic critical field in deuterated κ-(BEDT-TTF)2Cu[N(CN)2]Br organic superconductor

ABSTRACT

We have studied the reversible and irreversible part of the hysteresis loops as a function of slow cooling rate through the order–disorder transformation near 80?K for the deuterated (κ-D₈-Br) κ-(BEDT-TTF)₂Cu[N(CN)₂]Br organic superconductor. We estimated the critical current density J_C and the thermodynamic critical field H_C from the magnetic hysteresis loops. Temperature dependence of the critical current density derived from the irreversible part using Bean’s model. The thermodynamic critical field H_C has been obtained from the reversible part of the hysteresis loops.     

Growth temperature dependence of the hysteretic behavior of Ni0.5Zn0.5Fe2O4 thin films

Herein, a discussion of the effect of deposition temperature on the magnetic behavior of Ni_0.5Zn_0.5Fe₂O₄ thin films. The thin films were grown by r.f. sputtering technique on (1 0 0) MgO single-crystal substrates at deposition temperatures ranging between 400 and 800 °C. The grain boundary microstructure was analyzed via atomic force microscopy (AFM). AFM images show that grain size (φ∼70-112 nm) increases with increasing deposition temperature, according to a diffusion growth model. From magneto-optical Kerr effect (MOKE) measurements at room temperature, coercive fields, H_c, between 37and 131 Oe were measured. The coercive field, H_c, as a function of grain size, reaches a maximum value of 131 Oe for φ ∼93 nm, while the relative saturation magnetization exhibits a minimum value at this grain size. The behaviors observed were interpreted as the existence of a critical size for the transition from single- to multi-domain regime. The saturation magnetization (21 emu/g<M_s<60 emu/g) was employed to quantify the critical magnetic intergranular correlation length (L_c≈166 nm), where a single-grain to coupled-grain behavior transition occurs. Experimental hysteresis loops were fitted by the Jiles-Atherton model (JAM). The value of the k-parameter of the JAM fitted by means of this model (k/μ_o∼50 A m²) was correlated to the domain size from the behavior of k, we observed a maximum in the density of defects for the sample with φ∼93 nm.     

Effects of size and surface anisotropy on thermal magnetization and hysteresis in the magnetic clusters

Based on Monte Carlo simulation, the spin configurations, thermal magnetization and hysteresis loops of the clusters coated by the surface shell with radial anisotropy are studied. Interestingly, a new multidomain containing a few of subdomains whose easy directions are along those of the configurational anisotropy, a magnetization curve in steps and a first order phase transition from the single domain to the multidomain in the thermal and field magnetization processes, are found, which is as a result of the interplay of the configurational anisotropy, the size effect, the surface anisotropy, the applied field and the thermal fluctuation. In this first order transition, we find a critical temperature, a critical surface anisotropy and a critical size. The simulated temperature dependence of the coercivity of the cluster with the surface anisotropy can be fitted by H_c (T)=H_c (0)(1-C_αT^α) with low value of α, which explains well the experimental results of the nanoparticles. Moreover, it is found that the hysteresis loops and coercivity are strongly affected by the cluster size and the thickness of the surface layer.     

Temperature dependence of magnetic anisotropy in nanoparticles of CoxFe(3−x)O4

In this paper we present a study of the magnetic anisotropy constant of nanocrystalline magnetic particles of Co_xFe_(3−x)O₄, with x ranging from 0.05 to 1.6, synthesized by a combustion reaction. The magnetic anisotropy constants were obtained by fitting the high-field part of the major hysteresis loops with the law of approach equation down to temperatures of 4 K and up to fields of 60 kOe. The anisotropy constant depends strongly on both temperature and cobalt content x, exhibiting a nonmonotic dome-shaped dependence on x with a maximum at x=1.0. We found that fits at lower temperatures, i.e., 4 and 72 K, give values of K₁ that are approximately one order of magnitude higher than those at higher temperatures, i.e., 272 and 340 K. For example, K₁ for specimens with x=0.8 and 1.0 are 4.21×10⁷ and 4.22×10⁷ ergs/cm³ at 4 K, and 7.64×10⁶ and 7.51×10⁶ ergs/cm³ at 340 K, respectively. Thus, our determination of temperature-dependence of the anisotropy constant represents an improvement over existing works.     

The low field magnetisation of Y4Co3

The onset of magnetic order at 6 K and a superconducting transition at 2 K was previously observed in Y₄Co₃. In this paper we investigate the magnetisation in very low fields, in the vicinity of the magnetic and superconducting transition (T_c). Below T_c the M-H curves are characterised by broad hysteresis loops. This type of the behaviour indicates that the sample consists of different regions. Some of these regions are superconducting below T_c and others are magnetically ordered below 6 K.     

Superconductivity and x—ray photoemission study of MgB2 thin films

Highly c-axis oriented MgB2 thin films with Tc^onset of 39.6K were fabricated by magnesium diffusing into pulsedlaser-deposited boron precursors.The estimation of critical current density Jc,using hysteresis loops and the Bean model,has given the value of 10^7A/cm^2(15K,0T),which is one of the highest values ever reported.The x-ray photoemission study of the MgB2 thin films has revealed that the binding energies of Mg 2p and B 1s are at 49.4eV and 186.9eV,which are close to those of metallic Mg and transition-metal diborides,respectively.     

YBa2Cu3O7-xc轴方向临界电流的测定

本文测量了熔化织构法生长(MTG)的和通常烧结法制备的YBa₂Cu₃O_7-x块状样品的传输临界电流密度T_c以及磁场-样品不同取向的磁滞回线。MTG样品的J_c在78K和零场时达到3.5×10⁴A/cm²,实验提供了有力的证据表明如此高的J_c主要是由于块状样品内弱连接的消除,因为MTG块状样品的整体J_c与烧结样品颗 关键词：