PDMS-MDI-PEG多嵌段共聚物涂层表面微相分离行为研究

采用两步溶液聚合方法合成了一系列聚二甲基硅氧烷(PDMS)-4,4′-二苯基甲烷二异氰酸酯(MDI)-聚乙二醇(PEG)多嵌段共聚物.利用轻敲模式原子力显微镜(AFM)观察了嵌段共聚物的表明形貌,研究了退火、共聚物组成以及PEG分子量和不同的官能团对涂层表面微相分离行为的影响,同时对微相分离行为的形成机理也作了相应的探讨.研究表明,该嵌段共聚物即使在PDMS含量大于50wt%时,涂层表面仍呈现出规整有序的纳米级相分离结构,其中疏水相和亲水相分别由PDMS链段和MDI-PEG组分构成.     

多嵌段聚醚-酯共混物的微相结构与血液相容性研究

本工作合成了两种性质不同的聚醚-酯多嵌段共聚物,一种是以聚对苯二甲酸乙二酯为硬链段,聚乙二醇(PEGT)为软链段的亲水性多嵌段共聚物,另一种是以聚对苯二甲酸乙二酯为硬链段,聚四亚甲基醚二醇(PTMGT)为软链段的疏水性多嵌段共聚物。将两种共聚物以一定的比例共混,制备多嵌段聚醚-酯共混物。 改变共混物的组成,研究其微相结构与血液相容性的关系。采用动态力学谱(VES)、示差扫描量热(DSC)、透射电镜(TEM)和扫描电镜(SEM)等测定共混物的微观结构,采用微球柱法评价共混物的血液相容性。实验结果表明:材料的微观非均相结构及亲水平衡是决定血液相容性的重要因素。     

接枝共聚物聚苯乙烯－g－聚氧乙烯的微相分离形态研究

本文利用透射电子显微镜技术，以两性接校共聚物聚苯乙烯－ｇ－聚氧乙烯为研究对象，研究了接枝共聚物的微相分离形态结构，发现聚苯乙烯－ｇ－聚氧乙烯能形成微相分离结构，微区的形状和尺寸与共聚物的组成和侧链长度有关．文中还讨论了嵌段共聚物和接枝共聚物在形成微相分离结构时的共性和个性．     

聚己内酯聚醚嵌段共聚物和共混物的表面性质对其药物释放行为的影响

聚己内酯聚醚嵌段共聚物和共混物的表面性质对其药物释放行为的影响王卫华，贝建中，王智峰，王身国（中国科学院化学研究所北京１０００８０）关键词聚己内酯聚醚嵌段共聚物，共混物，电子能谱，表面性质，药物释放行为聚己内醋（ＰＣＬ）具有优良的药物通透性和生物相容...     

ORDERED STRUCTURAL EVOLUTION AND RELAXATION BEHAVIORS OF A SERIES MICROPHASE SEPARATED “HAIRY-ROD” POLYIMIDES WITH MULTIPLE ALKYL SIDE CHAINS

A series of “hairy-rod” polyimides, BBPA(n), with multiple alkyl side chains was prepared from 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) and 4,4′-biphenyldiamine substituted in the 2,2′-positions with benzoate, which was substituted in the 3,4,5-positions with ether side chains of varying lengths. The number of the methylene units, n, in these alkyl side chains were in even numbers ranging from 8 to 18. Combining techniques of one-dimensional (1D) and 2D wide angle x-ray diffraction, 1D small angle X-ray scattering, differential scanning calorimetry experiments, it was found that this series of “hairy-rod” polyimides possess a micro-phase separation between the backbones and side chains. This led to the formation of ordered structures in two different length scales, of which both are hexagonal packing: one is attributed to the alkyl side chains on the sub-nanometer scale, and another is for the whole polymer chains on the nanometer scale. The development of the hexagonal structure on the sub-nanometer scale was critically dependent upon the lengths of the alkylside chains. Three relaxation processes were captured by dynamic mechanical analysis, i.e., segmental motion of the backbones, α the melting of the side chain crystals, β1, which exits only for the materials with longer side chains(n=18,16); and the subglass relaxation of side chains, β2- The peak relaxation temperature of the α process decreased with increasing the length of side chains, while the one of the β2 process increased. The activation energy of the α relaxation was relatively independent on the length of side chain, whereas, β2 process showed the increasing of activation energy with increasing the length of side chains.     

PTHF—MMA嵌段共聚物的合成及性质

以含偶氮聚四氢呋喃(AZO-PTHF)为大分子引发剂,通过使甲基丙烯酸甲酯(MMA)进行自由基聚合的方法合成了PTHF-MMA嵌段共聚物。用GPC、IR、H-NMR和TMA对所得共聚物进行了表征。嵌段共聚物的韧性和耐折性大大超过PMMA,但透明性和强度却无明显损失。     

生物可降解磷酸酯-碳酸酯共聚物的合成及性能研究

通过光气，二氯磷酸酯和双酚Ａ反应，合成六种磷酸酯 碳酸酯共聚物，用ＩＲ、１Ｈ ＮＭＲ及元素分析表征了共聚物，测量了Ｍｎ和热学性质．初步研究了在ｐＨ７４磷酸盐缓冲溶液中，核糖核酸酶或碱性磷酸酶存在下的体外降解性能及其对抗肿瘤药物５ Ｆｕ的释放性能．     

丙烯酸丁酯-醋酸乙烯酯共聚物胶乳粒子的结构和性能

电镜观察表明,丙烯酸丁酯-醋酸乙烯酯共聚物胶乳粒子均为核-壳结构,若配料比不同,含量大者为核,而加料方式不同,则先加者先聚合成核.微观结构不同,可明显地影响胶膜的力学性能、T_g和耐水性.根据胶乳粒子微观结构的观察结果,认为当醋酸乙烯酯>50mol%时,共聚的引发和成核是在水相中进行的.     

多嵌段共聚物(P4VP-b-PS-b-P4VP)_n的胶束化行为研究

研究了一系列具有不同链段长度和组成的聚4-乙烯基吡啶-聚苯乙烯-聚4-乙烯基吡啶多嵌段共聚物(P4VP-b-PS-b-P4VP)n在其选择性溶剂甲苯和pH<3的水中的胶束化过程,主要研究了多嵌段共聚物链段长度、溶液浓度和溶剂对其胶束形态的影响.透射电镜和原子力显微镜结果表明随着P4VP段链的相对增长,多嵌段共聚物在甲苯中的胶束形态由蠕虫链状向短棒状到球状胶束变化,而其在pH<3的水溶液中均形成球形胶束.由于特殊的链结构,聚合物的浓度对(P4VP-b-PS-b-P4VP)n多嵌段共聚物的胶束行为和胶束形态有着重要的影响.同时,(P4VP-b-PS-b-P4VP)n多嵌段共聚物分子量分布的多分散性对其在选择性溶剂中的胶束形态也有所影响.     

变温红外光谱研究多嵌段聚氨脂脲的微相分离行为

用傅里叶变换红外光谱方法研究了热处理对由聚环氧丙烷聚醚多元醇、３．５－二乙基甲苯二胺和４，４－二苯基甲烷二异氰酸酯组成的多嵌段聚氨酯脲（ＳＰＵＵ）的微相分离行为的影响．从室温逐步升温到３１０℃的过程中，氨基甲酸酯键（ＵＴ）之间形成的氢键大量解离，而脲键（ＵＡ）之间形成的、具有平面状双分叉结构的氢键在１３０～２００℃范围却大量生成；从３１０℃缓慢冷却到室温后，部分游离的ＵＴ重新形成氢键，而硬段之间形成的ＵＡ氢键的含量又有所增加．结果表明：高温热处理可以有效地提高ＳＰＵＵ的微相分离程度．     

(丁二烯-环氧乙烷)多嵌段共聚物的表征及性能

由双羟基聚丁二烯与聚乙二醇用甲苯二异氰酸酯偶联而成的多嵌段共聚物经萃取精制后用IR、GPC、元素分析、膜渗透压、X-射线衍射及透射电子显微镜等表征,并研究其不同组成与乳化性质、相转移催化性质及力学性能的关系.     

含氟丙烯酸酯共聚乳液及其膜表面特性的研究

以十二烷基硫酸钠 (SDS)和OP 10混合乳化剂 ,制备了甲基丙烯酸全氟辛基乙酯 (FMA8) 甲基丙烯酸丁酯 (BMA) 甲基丙烯酸 (MAA)共聚乳液 .通过DSC、FT IR、1 H NMR对共聚物的结构、组成进行了表征研究 .采用JZHY 180界面张力仪研究了共聚乳液膜表面的性质 ,结果表明 ,随着共聚物中全氟单体含量的增加 ,共聚物膜的表面能显著降低 ,当全氟单体的含量达到 2 5wt %时 ,其表面能降低到 19 74mJ m2 .X ray光电子能谱(XPS)对共聚物表面原子组成的分析结果表明 ,共聚物表面氟的含量远高于其平均含量 ,证明了含氟基团的趋表现象 .经退火处理 ,共聚物膜表面的氟含量增加 ,表面自由能降低     

丙烯-乙烯共聚物/乙烯-1-辛烯共聚物层状复合材料的力学性能研究

利用自主设计的一套可进行微层共挤出的口模,分别制备了2层、16层、32层和64层丙烯-乙烯共聚物(PPE)/乙烯-1-辛烯共聚物(POE)交替层状复合材料。研究了制得的层状复合材料的应力-应变行为,利用等效盒子模型(equivalent box model)描述了层状复合材料与相应的常规PPE/POE共混材料力学行为的区别.通过对共挤出材料和共混材料的拉伸数据进行分析后发现,具有层状结构特别是多层结构的共挤出材料具有比共混材料更为优异的屈服和断裂伸长性能.     

含氟嵌段共聚物离聚体的合成表征及其性能研究

嵌段共聚物离聚体具有独特的形态和固体及溶液性质 ,在热塑性弹性体、极性材料与非极性材料共混相溶剂和粘度调节剂等领域具有十分广阔的应用前景 ,引起了人们的普遍关注 .文献报道较多的是聚苯乙烯 乙烯 丙烯[1] 、聚苯乙烯 乙烯 丁烯 苯乙烯[2 ] 、聚苯乙烯 异丁烯 苯乙烯[3 ] 等共聚物中 ,聚苯乙烯链段部分磺化后所得离聚体的合成与性质研究 .众所周知 ,含氟聚合物具有低表面能和高表面活性等特性 ,因而将含氟基团引入到嵌段共聚物离聚体中有望开发出一种新型的特殊功能材料 .原子转移自由基聚合 (ATRP)自 1 995年问世以来 ,已成功…     

CHARACTERIZATION OF AMPHIPHILIC AND MICROPHASE SEPARATED GRAFT COPOLYMERS Ⅱ SURFACE CHARACTERIZATION AND IN VITRO BLOOD-COMPATIBILITY ASSESSMENT OF POLYSTYRENE-GRAFT-ω-STEARYLPOLY (ETHYLENE OXIDE)*

This paper reported the research results concerning the surface characterization ofpolystyrene-graft-w-stearyl poly(ethylene oxide) (PS-g-SPEO) by means of XPS,contactangle measurement and TEM, and its in vitro blood compatibility assessment by measuringthe plasma recalcification time (RT) and partial thromboplastin time (PTT). The XPSresults demonstrated that the surface and bulk composition of the PS-g-SPEO graftcopolymers differ remarkably from each other,and that SPEO component was constantlyenriched at the copolymer/air interface. Contact angle studies indicated that the surfacewater wettability can be adjusted effectively by changing the composition of the copolymer.PS-g-SPEO graft copolymers can undergo microphase separation as clearly illustrated byTEM photographs. The relationship between the surface properties of PS-g-SPEO graftcopolymer and its blood compatibility was also discussed.     

表面活性含氟单体-丙烯酰胺共聚物溶液性质研究

以异佛尔酮二异氰酸酯(IPDI)、十二氟庚醇(FOH)、烯丙基聚乙二醇(APEG)合成的表面活性含氟单体(FSM)与丙烯酰胺通过水溶液聚合,制备出含氟疏水缔合聚丙烯酰胺(FPAM).用表面张力法研究了FSM的胶束化,用流变仪、动态激光光散射(DLS)和原子力显微镜(AFM)表征了FPAM溶液的流变性能、缔合结构尺寸和形态.结果表明,FSM在25℃下CMC为1.28 g.L-1,表面张力为26.77 mN.m-1.FPAM溶液属于假塑性体系,临界缔合浓度为0.660%,具有一定的耐盐性.DLS和AFM表明,在低于临界缔合浓度时FPAM溶液仍能产生大量的缔合结构,FPAM分子具有很强的疏水缔合性.     

PREPARATION AND PROPERTIES OF SILICONE-ACRYLATE COPOLYMER LATEX

Silicone-acrylate copolymer latex was prepared through three different polymerization processes, i.e., the batch process, preemulsified monomer addition and the monomer addition process. The results revealed that the monomer addition process is a desirable approach to produce narrow particle size distribution latex with higher polymerization conversion and less amount of coagulum. The effect of silicone content on the glossiness and water absorption of latex film was investigated and the results showed that the glossiness of latex film is improved up to a silicone content of 10% of total monomers, but becomes impaired thereafter, whereas water absorption is reduced accordingly.     

ORDERED STRUCTURAL EVOLUTION AND RELAXATION BEHAVIORS OF A SERIES MICROPHASE SEPARATED "HAIRY-ROD" POLYIMIDES WITH MULTIPLE ALKYL SIDE CHAINS

A series of "hairy-rod" polyimides, BBPA(n), with multiple alkyl side chains was prepared from 3,3′,4,4′biphenyltetracarboxylic dianhydride (BPDA) and 4,4′-biphenyldiamine substituted in the 2,2′-positions with benzoate, which was substituted in the 3,4,5-positions with ether side chains of varying lengths. The number of the methylene units, n, in these alkyl side chains were in even numbers ranging from 8 to 18. Combining techniques of one-dimensional (1D) and 2D wide angle x-ray diffraction, 1D small angle X-ray scattering, differential scanning calorimetry experiments, it was found that this series of "hairy-rod" polyimides possess a micro-phase separation between the backbones and side chains. This led to the formation of ordered structures in two different lengthscales, of which both are hexagonal packing: one is attributed to the alkyl side chains on the sub-nanometer scale, and another is for the whole polymer chains on the nanometer scale. The development of the hexagonal structure on the sub-nanometer scale was critically dependent upon the lengths of the alkyl side chains. Three relaxation processes were captured by dynamic mechanical analysis, i.e., segmental motion of the backbones, α, the melting of the side chain crystals, β1, which exits only for the materials with longer side chains (n = 18,16); and the subglass relaxation of side chains,β2. The peak relaxation temperature of the α process decreased with increasing the length of side chains, while the one of theβ2 process increased. The activation energy of the αrelaxation was relatively independent on the length of side chain, whereas, β2 process showed the increasing of activation energy with increasing the length of side chains.     

聚甲基丙烯酸甲酯接枝聚氧乙烯共聚物溶液性质的研究

采用核磁共振 (NMR)、动态激光光散射 (DLS)、透射电子显微镜 (TEM )等方法研究了规整性聚甲基丙烯酸甲酯接枝聚氧乙烯共聚物溶液性质 ,研究表明两亲接枝共聚物在选择性溶剂中可形成球状胶束 ,溶液的浓度、温度和聚合物结构等因素影响其胶束的大小、形态     

4-乙烯吡啶-丁烯酮共聚物与铑的顺二羰基配合物结构和性能研究

<正> 在铑催化剂的作用下,甲醇与一氧化碳经羰基化反应为乙酸和乙酸甲酯,是60年代发展起来的新工艺,但以往多是采用均相小分子铑催化剂,除我们的工作以外,迄今尚少见报道有采用以共聚物为配体的高分子铑催化剂的成功先例。