Ionic liquid mediated CO2 activation for DMC synthesis

Promoted catalytic reaction between methanol and CO2 for dimethyl carbonate(DMC) synthesis is conducted over K2CO3/CH3 I catalyst in the presence of ionic liquid under microwave irradiation.The effect of ionic liquids incorporated with microwave irradiation on the yield of DMC is investigated.DMC was found to form at lower temperature in a relative short time,which indicated an enhanced catalytic process by ionic liquid.Among the ionic liquids used,1-butyl-3-methylimidazolium chloride is the most effective promoter.Density functional theory calculations indicate that CO2 bond lengths and angles changed due to the molecular interaction of ionic liquid and CO2,resulting in the activation of CO2 molecules and consequently the acceleration of reaction rate.     

Diels-Alder Reactions of N-Functionalized Acryloyl α-Pyrrolidone Derivatives Using FeCl3·6H2O as an Efficient Catalyst under Solvent-free Conditions

Diels-Alder reactions of N-functionalized acryloyl α-pyrrolidone derivatives were investigated, which were catalyzed by FeCl3·6H2O as an efficient catalyst under solvent-free conditions at room temperature. The corresponding cycloadducts with functionalized-pyrrolidone were prepared in high yield with high stereoselectivity by a green chemistry procedure. N-Functionalized acryloyl pyrrolidone derivatives, a kind of pyrrolidone-functionalized chelating α,β-unsaturated ketone usable as a dienophile in Diels-Alder reaction, were synthesized by N-acylation procedure in ionic liquid as a novel synthetic method.     

Effect of ultrasonic irradiation and /or halogenation on the catalytic performance of γ-Al2O3 for methanol dehydration to dimethyl ether

Dimethyl ether(DME) is amongst one of the most promising alternative,renewable and clean fuels being considered as a future energy carrier.In this study,the comparative catalytic performance of the halogenated γ-Al 2 O 3 prepared from two halogen precursors(ammonium chloride and ammonium fluoride) is presented.The impact of ultrasonic irradiation was evaluated in order to optimize both the halogen precursor for the production of DME from methanol in a fixed bed reactor.The catalysts were characterized by SEM,XRD,BET and NH 3-TPD.Under reaction conditions where the temperature ranged from 200 to 400 ℃ with a WHSV = 15.9 h-1was found that the halogenated catalysts showed higher activity at all reaction temperatures.However,the halogenated alumina catalysts prepared under the effect of ultrasonic irradiation showed higher performance of γ-Al 2 O 3 for DME formation.The chlorinated γ-Al 2 O 3 catalysts showed a higher activity and selectivity for DME production than fluorinated versions.     

Dual-functional photocatalysis boosted by electrostatic assembly of porphyrinic metal-organic framework heterojunction composites with CdS quantum dots

Photocatalytic dual-functional reaction under visible light irradiation represents a sustainable development strategy. In detail, H₂ production coupled with benzylamine oxidation can remarkably lower the cost by replacing sacrificial agents. In this work, Cd S quantum dots(Cd S QDs) were successfully loaded onto the surface of a porphyrinic metal-organic framework(Pd-PCN-222) by the electrostatic selfassembly at room temperature. The consequent Pd-PCN-222/CdS heterojunction composites...     

Novel acid initiators for the rapid cationic polymerization of styrene in room temperature ionic liquids

Cationic polymerization of styrene has been achieved using several novel acidic initiators in room temperature ionic liquids (ILs) under mild reaction conditions to obtain polymers of low molecular weight with narrow polydispersity. Both strong protic acids such as bis(trifluoromethanesulfonyl) amide acid (HTFSA) and a moderately weak acid such as bisoxalato phosphorous acid (HBOP) have been studied as initiators. It has been observed that HTFSA initiates the polymerization rapidly even at room temperature and below, as compared to HBOP which produces a slower polymerization requiring elevated temperatures to complete. The relative difference in reactivity of the initiators as compared to the previously described HBOB initiator is discussed in terms of the difference in their proton acidity and the consequential basicity of the anions. The efficiency of different ILs as the reaction solvent is also presented.     

室温离子液体BMIGaCl4热力学性质研究

An ionic liquid （IL） BMIGaCh was prepared by directly mixing GaCl3 and 1-methyl-3-butylimidazolium chloride with molar ratio of 1/1 under argon atmosphere. The densities and surface tensions of this pure ionic liquid were determined in the temperature range of 268.15 to （338.15±0.1） K. A new theoretical model of ionic liquids, an interstice model, was applied to calculate the thermal expansion coefficient of IL BMIGaCh, a, and the magnitude order of its value calculated by the theory was the same as experimental one. Both Raman scattering and ab initio calculations indicate that GaCl4^- is the only species containing Ga in the ionic liquid BMIGaCl4.     

Application of Ultrasonic Attenuation Measurements in the Studies on Macromolecular Conformational Behaviors

——Phase Behavior of the Aqueous Solution of Poly(vinyl methyl ether) Sensitive to Temperature and the Modification of the Behavior by Using Poly(acrylic acid) The phase behavior of the aqueous solution of poly(vinyl methyl ether) (PVME) sensitive to temperature and the modification of the behavior by using poly(acrylic acid) (PAA) have been studied by ultrasonic attenuation measurements and fluorescence probe techniques. It has been observed that PVME solution is transparent at room temperature and becomes turbid upon heating. The solution turns clear again as soon as the temperature is decreased to room temperature. The heating and cooling process can be repeated for many times. The phase behavior of the solution sensitive to temperature is attributed to the conformational changes of the polymer. PVME may adopt an open coil conformation at room temperature. With this conformation, the polymer is well miscible with the solvent, water, and thereby the system is a real solution. The polymer may adopt a compact coil conformation when the temperature is higher than a specific value, which is called the LCST (the lower critical solution temperature) of PVME. In this case, the polymer tangles to each other and forms various aggregates, which can scatter incident light and ultrasonic waves greatly, resulting in the phase separation. Introduction of PAA decreases the temperature sensitivity of the phase behavior of the polymer. The nature of the inhibition is attributed to the complexation of PAA with PVME and the strong hydrophilicity of PAA. Results from fluorescence probe studies are in accordance with those from ultrasonic attenuation measurements, indicating again that the ultrasonic attenuation method can be successfully used for the qualitative studies of polymer conformations and complexation between polymers.     

Synthesis of Stable Silver Nanoparticles with Antimicrobial Activities in Room-temperature Ionic Liquids

Stable silver nanoparticles was successfully synthesized by chemical reduction of silver nitrate in an ionic liquid,1-n-butyl-3-methylimidazolium tetrafluoroborate([BMIM]·BF4) at room temperature.Results of UV-Vis diffuse reflectance spectroscopy show as-prepared Ag nanoparticles exhibit a typical emission peak at 400―430 nm.By varying the reaction temperature and the precursor concentration,the size and the shape of the silver nanoparticles could be easily controlled under mild conditions.Analyses of trans...     

Separation and determination of pyrrolidinium ionic liquid cations by ion chromatography with direct conductivity detection

A method for rapid and simultaneous determination of multiple pyrrolidinium ionic liquid cations by ion chromatography with direct conductivity detection was developed.Chromatographic separations were performed on a cation exchange column using ethylenediamine-acetonitrile as the mobile phase.The effects of chromatographic column and the mobile phase,as well as the column temperature on the retention of the cations were investigated.The retention rules of the cations under different chromatographic conditions were formulated.The retention of the cations followed the carbon number rule.The method has been successfully applied to the determination of three ionic liquids synthesized by a chemical laboratory.     

SYNTHESIS OF FUNCTIONAL MACROMOLECULE INTERMEDIATE THROUGH ACYLATION CATALYZED BY [Emim]Cl-AlCl3 IONIC LIQUID

Acylation reaction of anthracene with oxalyl chloride in the presence of [Emim]Cl-AlCl3 ionic liquid has been investigated. Pure 1,2-aceanthryenedione, which is used as intermediate of functional aromatic polymer material, was obtained by recrystalling the reaction mixture with aether and was determined by GC/MS, 1↑HNMR and FTIR analysis. The influences of various parameters, such as the contents of AlCl3 in [Emim]Cl-AlCl3, the amount of acylation agent, amount of [Emim]Cl-AlCl3, reaction temperature and reaction time were investigated. The optimum conditions were as follows： the molar fraction of AlCl3 in ionic liquid [x（AlCl3）] being 0.67, molar ratio of ionic liquid to anthracene being 2：1, molar ratio of oxalyl chloride to anthracene being 2：1, reaction temperature being 40℃ and reaction time being 6h. Under above conditions, the yield and selectivity of 1,2-aceanthrylenedione can reach 91.5% and 98.3% respectively. Further more, [Emim]Cl-AlCl3 ionic liquid, compared with metal halides such as AlCl3, was found to catalyze the reaction as a novel environmental friendly catalyst and solvent and can be reused.     

Dimethylether production on zeolite catalysts activated by Cl-, F- and/or ultrasonication

The chlorinated and fluorinated zeolite catalysts were prepared by the impregnation of zeolites( H-ZSM-5,H-MOR or H-Y) using two halogen precursors( ammonium chloride and ammonium fluoride) in this study. The influence of ultrasonic irradiation was evaluated for optimizing both halogen precursors for production of dimethylether( DME) via methanol dehydration in a fixed bed reactor. The catalysts were characterized by SEM,XRD,BET and NH3-TPD. The reaction conditions were temperatures from 100 to 300 ℃ and a WHSV = 15. 9 h-1. All halogenated catalysts showhigher catalytic activities at all reaction temperatures studied. However, the halogenated zeolite catalysts prepared under ultrasonic irradiation showhigher performance for DME formation. The chlorinated zeolite catalysts show higher activity and selectivity for DME production than the respective fluorinated versions.     

THE EFFECT OF IRRADIATION ON THE POLYETHERKETONE WITH CARDO GROUP

The effects of irradiation on the polyetherketone with cardo group (PEK-C) were studied. It was found that PEK-C can be crosslinked by irradiation under vacuum, while degradation reaction occurred in PEK-C at room temperature in the presence of air. Moreover. it was also found that Ts value of the crosslinked PEK-C at high temperature is higher than that at room temperature in the case of the same gel content, whose value is about 8℃higher than that of unirradiated PEK-C. The gelation dose of PEK-C at 300℃under vacuum is 1.5×10~4 Gy, which is about hundred times smaller than that at room temperature.     

An expedient one-pot synthesis of highly substituted imidazoles using supported ionic liquid-like phase（SILLP） as a green and effcient catalyst and evaluation of their anti-microbial activity

An effcient method for the synthesis of imidazole derivatives by a three-component condensation of benzil or 9,10-phenanthrenequinone,aldehydes and ammonium acetate using supported ionic liquidlike phase（SILLP）catalyst under ultrasonic irradiation or classical heating conditions is reported.The present methodology offers several advantages,such as excellent yields,simple procedures,short reaction times,simple work-up and mild conditions.The catalyst is easily separated from the products by fltration and also exhibits remarkable reusable activity.These highly substituted imidazoles were also evaluated for their anti-microbial activity.     

ZnO sheets prepared with a light-assisted growth method for improved photodegradation performance

ZnO as a semiconductor photocatalyst is widely applied in the photodegradation of organic pollutants.Its photocatalytic activity is greatly decreased because of the recombination of photoexcited electrons and holes in the bulk.In this work,Zn O sheets are synthesized by adjusting the Na OH concentration under light irradiation at room temperature.Compared with Zn O particles,the Zn O sheets prepared with a light-assisted growth method exhibit a higher rate of photodegradation of methylene blue under UV–visible light irradiation.The improved photodegradation rate is mainly attributed to the shortened transport distance of photoexcited electrons,the high surface area,and the surface atom structure modified by the light-assisted growth process.     

A novel and efficient strategy for the synthesis of various carbamates using carbamoyl chlorides under solvent-free and grinding conditions using microwave irradiation

We present an efficient,fast and simple strategy of generating the intermediate carbamoyl chlorides from secondary amines using stoichiometric amounts of bis(trichloromethyl)carbonate(BTC) in solution and solvent-free conditions with excellent yields.The results obtained showed the yield increasing on whether a base was used.Finally,an efficient and rapid synthesis of variety carbamate derivatives was developed by the reaction with a high variety of different alcohols,phenols,diols and this intermediate at room temperature with grinding and in solvent-free conditions under microwave irradiation.The presence of various safe bases is shown to be effective in reducing the reaction times,increasing the yields and easing purification.The present method does not involve any hazardous phosgene.     

Polystyrene-supported chloroaluminate ionic liquid as a new heterogeneous Lewis acid catalyst for Knoevenagel condensation

Non-hygroscopic polystyrene-supported chloroaluminate ionic liquid was prepared from the reaction of Memfield resin with 1- methylimidazole followed by reaction with aluminum chloride.This Lewis acidic ionic liquid is environmentally friendly heterogeneous catalyst for the Knoevenagel condensation of aromatic and aliphatic aldehydes with ethyl cyanoacetate.The catalyst is stable(as a bench top catalyst) and reusable.     

Regioselective aminohalogenation of β-nitrostyrenes using NCS and NBS as nitrogen/halogen sources

Aminohalogenation reaction of β-nitrostyrenes with N-halosuccinimides(N-chloro and N-bromosuccinimides) has been successfully conducted by using nickel acetate as a catalyst in the presence of potassium carbonate and succinimide as co-additives.The reaction was easily performed at room temperature under nitrogen gas protection to give dihalorinaed haloamino products in good to excellent yields(60%-98%).The structure has been confirmed by X-ray crystal structure analysis.     

Fixation of CO_2 by electrocatalytic reduction to synthesis of dimethyl carbonate in ionic liquid using effective silver-coated nanoporous copper composites

<正>With high surface area,open porosity and high efficiency,a catalyst was prepared and firstly employed in electrocatalytic reduction of CO_2 and electrosynthesis of dimethyl carbonate(DMC).The electrochemical property for electrocatalytic reduction of CO_2 in ionic liquid was studied by cyclic voltammogram(CV).The effects of various reaction variables like temperature,working potential and cathode materials on the electrocatalytic performance were also investigated.80%yield of DMC was obtained under the optimal reaction conditions.     

Safety-enhanced Polymer Electrolytes with High Ambient-temperature Lithium-ion Conductivity Based on ABA Triblock Copolymers

Liquid electrolytes used in lithium-ion batteries suffer from leakage,flammability,and lithium dendrites,making polymer electrolyte a potential alternative.Herein,a series of ABA triblock copolymers(ABA-x)containing a mesogen-jacketed liquid crystalline polymer(MJLCP)with a polynorbornene backbone as segment A and a second polynorbornene-based polymer having poly(ethylene oxide)(PEO)side chains as segment B were synthesized through tandem ring-opening metathesis polymerizations.The block copolymers can self-assemble into ordered morphologies at 200℃.After doping of lithium salts and ionic liquid(IL),ABA-x self-assembles into cylindrical structures.The MJLCP segments with a high glass transition temperature and a stable liquid crystalline phase serve as physical crosslinking points,which significantly improve the mechanical performance of the polymer electrolytes.The ionic conductivity of ABA-x/lithium salt/IL is as high as 10-3 S·cm-1 at ambient temperature owing to the high IL uptake and the continuous phase of conducting PEO domains.The relationship between ionic conductivity and temperature fits the Vogel-Tamman-Fulcher(VTF)equation.In addition,the electrolyte films are flame retardant owing to the addition of IL.The polymer electrolytes with good safety and high ambient-temperature ionic conductivity developed in this work are potentially useful in solid lithium-ion batteries.     

SINGLE-ION CONDUCTIVITY IN POLY (LITHIUM PROPIONATE METHYL SILOXANE)

Poly(lithium propionate methyl siloxane )as a single-ion carrier source was synthesized. The crosslinked film showed lower lithium ionic conductivity at room temperature (about 10~(-10) S/cm). However,the lithium ionic conductivity was obviously increased by blending with high polar polymers such as polyethylene oxide, poly (methylsiloxane - co- ethylene oxide) and poly (methylsiloxane- g- ethylene oxide). In the blend system a high conductivity of 10~(-7)-10~(-5) Scm~(-1) at room temperature was obtained and the single-ion conductivity was deeply influenced by the content of the poly (lithium propionate methyl siioxane). The dc ionic conductivity of the flexible crosslinked films is more stable over time.