Photometric determination of N-(p-nitrophenyl)maleimide

A procedure has been developed for the photometric determination of N-(p-nitrophenyl)maleimide based on the formation of a salt of the acinitro form of N-(p-nitrophenyl)maleic acid monoamide, which is formed on the hydrolysis of maleimide in concentrated acetic acid. Maleimide is dissolved in concentrated acetic acid, and the obtained solution is neutralized with an alkali. A bright yellow color of the reaction product appears.     

First report of isolation of maleamic acid from natural source Polygonatum cirrhifolium—A potential chemical marker for identification

Polygonatum cirrhifolium (Meda) plant is being used in number of rejuvenating Ayurvedic formulations. Ever rising demands, lack of natural sources, and insufficient quantity, to meet the requirements of market, the raw material has led toward the use of official substitutes recommended by the Department of AYUSH that has further encouraged manufacturers for adulteration of formulations by other substandard/spurious raw drugs. Literature reveals that more than 60% Ayurvedic parameters as well as pharmacological actions of Ashtawarga plants do not match with their substitutes leading to reduced efficacy of the drugs along with loss of faith for use of herbal drugs. Consumers are forced to pay for the material which has never been used for high-cost claimed formulation. The situation is being exploited by manufacturers because regulatory authorities lack the tools (marker compound) needed for identification of authentic plant. Methanolic extract of rhizomes of plant was subjected to column chromatography. Isolated compound has been characterized as (Z)-4-amino-4-oxobut-2-enoic acid (maleamic acid/maleamate/maleic monoamide/maleic acid monoamide) by chemical test, melting point, IR/NMR/mass/UV spectral analysis. It is the first report in Polygonatum genus and can be used as a marker for identification of the plant in market formulations.     

Chelating Group Enabled Palladium-Catalyzed Regiodivergent Carbonylative Synthesis of 2,3-Dihydroquinolin-4(1H)-ones

A new procedure on palladium-catalyzed carbonylative cyclization of N-(2-pyridyl)sulfonyl (N-SO₂Py)-2-iodoanilines with terminal alkenes has been developed for the rapid construction of dihydroquinolin-4(1H)-one scaffolds. Enabled by the chelating group and using benzene-1,3,5-triyl triformate (TFBen) as the CO source, both aromatic and aliphatic alkenes were smoothly transformed into the corresponding 2,3-dihydroquinolin-4(1H)-ones in good yields with excellent regioselectivities. Notably, the reaction of aromatic alkenes produces 2-aryl-2,3-dihydroquinolin-4(1H)-ones, while 3-alkyl-2,3-dihydroquinolin-4(1H)-ones were obtained when aliphatic alkenes were used. This protocol has been applied in the synthesis of antitumor agent A as well.     

Polymer monolayers with a photosensitive crown‐ether

The mixed monolayers of a photosensitive crown‐ether (CE) and poly(maleic acid hexadecyl monoamide‐alt‐propylene) (P12) have been prepared and studied. Fluorescence spectra of CE have a strong band at 530–535 nm in solution (monomer) or at 593–603 nm in transferred monolayers (aggregates). Due to the interaction with polymer the fluorescence maximum of CE is shifted to 530 nm in the mixed monolayers with P12.     

Spectrophotometric determination of copper and iron and analysis of their mixtures by means of biacetyl (2-Pyridyl)hydrazone thiosemicarbazone

Summary Spectrophotometric Determination of Copper and Iron and Analysis of Their Mixtures by Means of Biacetyl (2-Pyridyl)hydrazone Thiosemicarbazone Biacetyl (2-pyridyl)hydrazone thiosemicarbazone (BPHT) has been examined to evaluate its usefulness as a selective Spectrophotometric reagent for iron and copper. Iron(II) reacts with BPHT, yielding a green complex in weakly acid medium. Copper(II) and BPHT form yellow or red complexes in acid or alkaline media, respectively. In addition, both ions can be determined simultaneously. The methods have been applied to the determination of copper and iron in ores and alloys, and their mixtures in pharmaceutical preparations.     

Diphenylarsinoderivate des Maleinsäureanhydrids und verwandte Verbindungen. Kristall- und Molekülstruktur des 2,3-Bis(diphenylstibino)maleinsäureanhydrids

The unusual properties of bis(diphenylphosphino)maleic anhydride and similar ditertiary phosphines has prompted the synthesis of analogous arsines and stibines. Bis(diphenylarsino)maleic anhydride,-maleic thioanhydride and-N-methyl maleic imide, bis(diphenylstibino)maleic anhydride (5) and-maleic thioanhydride are obtained as crystalline yellow or red compounds by the reaction of the corresponding 2,3-dichloromaleic acid derivatives with diphenyl(trimethylsilyl)arsine and-stibine resp. The uv/vis spectra and characteristic i.r. bands of selected compounds are given and compared with those of the corresponding phosphines. The strong shift of _C=C to lower wavenumbers observed in all compounds has caused the determination of crystal and molecular structure of5 by x-ray diffraction. Bond distances and angles are given. The complex formation of the new diarsine ligands has been examined by the preparation of Ni-, Cr- and Mo-carbonyl derivatives. As the first organylsulfane substituted maleic acid derivatives bis(phenylthio)maleic thioanhydride,-N-methyl-maleic imide and-maleic acid dimethylester are synthesized and described.

     

Diphenylphosphinoderivate von Malein- und Fumarsäureestern: Darstellung,Eigenschaften, Kristall- und Molekülstrukturen

The reaction between 2,3-dichloromaleic acid dialkylester (alkyl=CH₃ and C₂H₅) and diphenyl(trimethylsilyl)phosphine, leading to diphenylphosphine substituted esters of maleic and fumaric acid has been studied. With a molar ratio 1:1 of the components 2-chloro-3-diphenylphosphinomaleic acid dimethylester (3) and-diethylester are obtained as colourless crystalline compounds. From a 1:2 reaction however only bis(diphenylphosphino)fumaric acid dimethylester (colourless crystals) and-diethylester (yellow) can be crystallized, the latter in a partially oxydized form. The presence of bis(diphenylphosphino)maleic acid diester in the oily part of the reaction products has been proved by its chelating with Ni²⁺ and Pd²⁺ to complexes of the compositionMeCl₂·(PP). Pure bis(diphenylphosphino)maleic acid dimethylester (4) could be synthesized by alcoholysis and following methylation of bis (diphenylphosphino)maleic anhydrid. Contrary to this easily chelating and air stable compound the corresponding fumaric acid diesters give no complexes with the metals examined as far and are very sensitive towards oxygen. This sensitivity decreases strongly after oxydation to 2-diphenylphosphino-3-diphenylphosphorylfumaric acid diester, the diethylester of which could be crystallized in pure form.Characteristic vibration bands, uv/vis-absorption and³¹P-nmr peaks are discussed.The result of X-ray diffraction data of3 and4 are reported and conformation, bond lengthes and bond angles of these molecules are given.     

N-Heteroaromatic Fluoroalkylation through Ligand Coupling Reaction of Sulfones

Ligand coupling on hypervalent main group elements has emerged as a pivotal methodology for the synthesis of functionalized N-heteroaromatic compounds in recent years due to the avoidance of transition metals and the mildness of the reaction conditions. In this direction, the reaction of N-heteroaryl sulfur(IV) and N-heteroaryl phosphorus(V) compounds has been well studied. However, the ligand coupling of sulfur(VI) is still underdeveloped and the reaction of alkyl N-heteroarylsulfones is still elusive, which does not match the high status of sulfones as the chemical chameleons in organic synthesis. Here we present a ligand coupling-enabled formal SO₂ extrusion of fluoroalkyl 2-azaheteroarylsulfones under the promotion of Grignard reagents, which not only enriches the chemistry of sulfones, but also provides a novel and practical synthetic tool towards N-heteroaromatic fluoroalkylation.     

Method for trace determination of N-nitrosamines impurities in metronidazole benzoate using high-performance liquid chromatography coupled with atmospheric-pressure chemical ionization tandem mass spectrometry

Genotoxic impurity control has been a great concern in the pharmaceutical industry since the recall of the large round of sartans worldwide in 2018. In these sartans, N-nitrosamines were the main contaminants in active pharmaceutical ingredients and formulations. Numerous analytical methods have been developed to detect N-nitrosamines in food, drugs, and environmental samples. In this study, a sensitive method is developed for the trace determination of N-nitrosamine impurities in metronidazole benzoate pharmaceuticals using high-performance liquid chromatography/atmospheric-pressure chemical ionization tandem mass spectrometry in the multiple reaction monitoring mode. The method was validated regarding system suitability, selectivity, linearity, accuracy, precision, sensitivity, solution stability, and robustness. The method showed good linearity with R² ≥ 0.999 and F_Mandel < F_tab(95%) ranging from 0.33 to 8.00 ng/ml. The low limits of detection of N-nitrosamines were in the range of 0.22–0.80 ng/ml (0.0014–0.0050 ppm). The low limits of quantification were in the range of 0.33–1.20 ng/ml (0.0021–0.0075 ppm), which were lower than the acceptable limits in metronidazole benzoate pharmaceuticals and indicated the high sensitivity of the method. The recoveries of N-nitrosamines ranged from 84% to 97%. Thus, this method exhibits good selectivity, sensitivity, and accuracy. Moreover, it is a simple, convenient, and scientific strategy for detecting N-nitrosamine impurities in pharmaceuticals to support the development of the pharmaceutical industry.     

Amphiphilic maleic acid-containing alternating copolymers—1. Dissociation behavior and compositions

The dissociation of the two adjacent carboxylic acids in maleic acid-containing copolymers is expected to differ from those of poly(acrylic acid) and poly(methacrylic acid) where the acids are separated by two carbons on the backbone. In this work, we have employed potentiometric titration and NMR spectroscopy to characterize the dissociation behavior and chemical compositions of several water-soluble maleic acid-containing copolymers. A distinct two-step process corresponding to the dissociation of the two adjacent carboxylic acids is observed in aqueous CaCl₂ (0.02 N) solution for copolymers of maleic acid and isobutylene, diisobutylene, and styrene. Such a two-step ionization process is less recognizable, however, for the copolymers of maleic acid and linear alkenes ranging from n-hexene to n-octadecene. Nevertheless, the compositions of all copolymers, including the extent of neutralization and the ratio of the comonomer moieties, are estimated from the titration curves. The chemical composition derived from potentiometry and NMR spectroscopy for all copolymers are approximately 1 : 1 (maleic acid : comonomer). With the exception of the hydrophobically modified copolymer of isobutylene-maleic acid, no obvious conformational transition was observed over the whole range of ionization for these hydrophobic maleic acid-containing copolymers. This is related to the aggregated state of these copolymers in aqueous media. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3571–3583, 2004     

Amphiphilic maleic acid-containing alternating copolymers—2. Dilute solution characterization by light scattering,intrinsic viscosity,and PGSE NMR spectroscopy

The dilute solution behavior of several alternating copolymers of maleic acid has been characterized by static and dynamic light scattering, intrinsic viscosity, and pulsed-gradient spin-echo NMR spectroscopy. The copolymer of maleic acid–sodium salt and isobutylene (IBMA-Na, M_w ∼350 kg/mol) dissolves readily in concentrated aqueous salt solutions. Changes in chain dimensions with ionic strength and pH are similar to those of the lesser salt solution-soluble poly(acrylic acid-sodium salt). The hydrophobically modified (with n-butyl, n-hexyl, n-octyl, and phenethyl amines) copolymers of maleic acid–sodium salts and isobutylene (IBMA-NHR-Na) show no sign of large intermolecular aggregation in 0.1 N sodium acetate (NaAc). However, the sizes of the copolymers are relatively small compared to that of the ionized parent copolymer (IBMA-Na, M_w ∼350 kg/mol), suggesting intramolecular aggregation of the alkyl side-chain groups along the polymer backbone. The copolymer modified with the longer chain n-decyl, on the other hand, forms stable large intermolecular aggregates containing 33 chains/aggregate. The copolymers of maleic acid–sodium salt and styrene (SMA-Na) appear to have no signs of aggregation, despite being a hydrophobic polyelectrolyte. The copolymer of maleic acid–sodium salt and di-isobutylene (DIBMA-Na) has a similar salting-out concentration as SMA-Na. The radius of gyration measurements by static light scattering suggest that at least some fraction of the DIBMA-Na chains form large intermolecular aggregates. The copolymers of maleic acid–sodium salt with n-alkenes (n-C_mMA-Na) in 0.1 N NaAc form small intermolecular aggregates (three to five chains/aggregate). In contrast to these static light scattering results, PGSE NMR diffusion measurements for the above aggregated systems indicate only one diffusion coefficient consistent with the motion of single isolated chains. A plausible explanation for this discrepancy is that the population of the aggregates is too small to be sufficiently detected in the PGSE NMR experiment. Furthermore, it is likely that the aggregate has a larger relaxation rate than the nonaggregate, and therefore has a comparatively reduced signal in the PGSE NMR experiment. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3584–3597, 2004     

Spectroscopic,Electrochemical, and Kinetic Characterization of New Ruthenium(II) Tris-chelates Containing Five-Membered Heterocyclic Moieties

Synthesis, redox, photophysical, and photochemical properties of Ru(NN) complexes NN = 2-((2′-pyridyl)thiazole (pyth), 2-(2′-pyrazyl)thiazole (pzth), 2,2′-bithiazole (bth), 5-(2′-pyridyl)-1,2,4-thiadiazole (pytda), 2-(2′-pyridyl)imidazole (pyim), 1-methyl-2-(2′-pyridyl)imidazole (Mepyim), and 2-(2′-pyridyl)oxazole (pyox)) are described. Oxidation potentials for the Ru^3+/2+ couples in MeCN varied from about 0.80 V to 1.60 V vs. NHE. Three reduction waves were observed in all the cases except for Ru(pyim) and Ru(Mepyim) complexes and asigned to the one-electron reduction of each bidentate ligand. Absorption spectra contained bands in the UV (280–325 nm) and VIS (437–481 nm) regions which have been assigned to ligand-centered π-π* and metal-to-ligand charge-transfer dπ-π* transitions, respectively. Emission spectra at 77 K were determined for all the complexes presenting maxima in the 580–650-nm region, with vibrational progression in some of them. Only pyth, pzth, bth, and pytda tris-chelates showed luminescence at room temperature in aqueous solution, with quantum yields ranging from 0.0013 to 0.0095 and excited-state lifetimes from 55 to 390 ns, as determined from pulsed laser techniques. Their E_0–0 spetroscopic energies have been estimated from emission wavelength maxima at 77 K which, in turn, have allowed calculation of excited-state redox potentials. A plot of E_0–0 vs. ΔE_1/2, where ΔE_1/2 = E_1/2(3+/2+) ? E_1/2(2+/+), was linear with a slope of ca. 1.1 and a correlation coefficient of 0.999, demonstrating an identical nature of the orbital involved in spectroscopic and electrochemical processes. Photochemical properties of Ru(NN) complexes have been tested using methyl viologen (MV²⁺) in Ar-purged aqueous solution at pH 5. Stern-Volmer treatment has led to the determination of bimolecular quenching constants (0.5 to 2 × 10⁹m^?1·s^?1) which parallel electron-transfer free-energy changes. Homogeneous back-reaction of primarily produced MV^+· and Ru(NN) has been measured resulting to be slightly higher than diffusion control and independent of ligand nature. Rate constants for the scavenging of Ru(NN) by added edta have been also determined (1.7 to 8.2 × 10⁸M^?1 · S^?1). Under such conditions, net production of MV^+· is attained with quantum yields varying from 0.003 to 0.038 (single-shot laser results).     

Synthesis of N,N-bis[2-(2-pyridyl)ethyl]amino steroids and related compounds intended as chiral ligands for copper ions

Compounds with the N,N-bis[2-(2-pyridyl)ethyl]amino structure (RPY2) are useful tridentate ligands for copper(I) ions, which can bind and activate oxygen from the atmosphere. For diastereoselective and enantioselective oxidation reactions, hitherto unknown chiral ligands possessing tripodal structures have been synthesized starting from homochiral steroids. The double Michael addition of primary steroidal amines and aminoalcohols to 2-vinyl pyridine was not very succesful. However, homochiral bidentate ligands with N-[2-(2-pyridyl)ethyl]amino steroid structure could be obtained by this procedure in most cases. New routes (acylation of the bidentate ligands with 2-pyridylacetic acid followed by BH₃·THF reduction, or reductive amination of steroidal ketones, acylation and borane reduction) to the desired tridentate RPY2, also at sterically hindered positions, are described. In the last reaction sequence, ‘mixed’ tridentate ligands can also be obtained. Copper complexation and oxygen activation with these ligands are briefly discussed.     

Alkoxide-Promoted Selective Hydroboration of N-Heteroarenes: Pivotal Roles of in situ Generated BH3 in the Dearomatization Process

While numerous organo(metallic)catalyst systems were documented for dearomative hydroboration of N-aromatics, alkoxide base catalysts have not been disclosed thus far. Described herein is the first example of alkoxide-catalyzed hydroboration of N-heteroaromatics including pyridines, providing a broad range of reduced N-heterocycles with high efficiency and selectivity. Mechanistic studies revealed an unprecedented counterintuitive dearomatization pathway, in which 1) pyridine-BH₃ adducts undergo a hydride attack by alkoxyborohydrides, 2) in situ generated BH₃ serves as a catalytic promoter, and 3) 1,4-dihydropyridyl borohydride is in a predominant resting state.     

Selective oxidation of crotyl alcohol and crotonaldehyde on V2O5/MgO: In situ FTIR study

The adsorption of crotyl alcohol, crotonaldehyde and crotonic acid on MgO, V₂O₅ and V₂O₅/MgO mixed oxide was studied under oxidizing conditions by in situ FTIR spectroscopy. The results were further analyzed in order to investigate the surface intermediates of crotonaldehyde oxidative dehydrogenation to maleic anhydride. A stable surface compound, alkoxide, was found during the crotyl alcohol adsorption for all oxides at room temperature (RT). The reaction between the adsorbed crotonaldehyde and the oxygen atom of the catalyst resulted in the formation of carboxylate at higher temperatures (T>373 K). The formation of two different reaction products (furane and maleic anhydride) was detected from IR spectra following the crotonaldehyde adsorption at various oxygen pressures. It can be deduced that crotonic acid easily dissociates to form the surface carboxylate-crotonate, which is further oxidized to maleate and consequently to maleic anhydride at 573 K.     

The mass spectra of benzamide and thiobenzamide

The mass spectra of benzamide, thiobenzamide and their N-d₂ analogues have been studied In addition to fragmenting by simple bond cleavages the molecular ions dissociate partly from their imide forms. Equilibration or ‘scrambling’ of ortho ring hydrogen atoms with amide hydrogen did not occur in benzamide but such exchange must take place in the thiocompound whose fragmentation behaviour is very complex. Neither labelled compound produced the label-retaining benzoyl (thiobenzoyl) cation which has been the subject of much interest in the mass spectrum of O-d₁ benzoic acid.     

Synthesis of some benzimidazole- and benzothiazole-derived ligand systems and their precursory diacids

Procedures are described for the preparation of various bidentate and linear tetradentate benzimidazoles and benzothiazoles incorporating units such as pyridyl and thioether, and for the preparation of certain thioether dicarboxylic acids precursory to them. Condensations of ortho-functinal anilines with carboxylic acids were carried out in polyphosphoric acid or refluxing HCl solution. Syntheses are reported for: [HO₂C(CH₂)2S(CH₂)₂]₂X (X = O, S), 1,9-bis(benzimidazol-2-yl)-2,5,8-trithianonane, 1,11-bis(N-methylbenzimidazol-2-yl)-3,6,9-trithiaundecane, 1,11-bis(2-benzimidazol-2-yl)-6-oxo-3,9-dithiaundecane, 2-(2-pyridyl)benzothiazole, 2,6-bis(benzothiazol-2-yl)pyridine, 2-(2-pyridyl)-N-methylbenzimidazole, 2-(2-pyridylmethyl)benzimidazole and 2-(N-methyl-2-piperidyl)benzimidazole. The compounds were characterized, where appropriate, by their mass, uv and ¹H-nmr spectra.     

一维双链镉(Ⅱ)配合物[Cd(C5H5N)CH2C(OH)(PO3)(PO3H)·3H2O]n的合成与晶体结构

A new cadmium complex [Cd(C₅H₅N)CH₂C(OH)(PO₃)(PO₃H)·3H₂O]_n((C₅H₄N)CH₂C(OH)(PO₃H₂)₂=1-hydroxy-2-(2-pyridyl)ethylidene-1,1-diphosphonate acid) has been synthesized under hydrothermal conditions. Single crystal structure determination reveals that the compound has a ladder-like chain structure in which the edge-shared {CdO₆} octahedra are linked by {CPO₃} tetrahedra through corner-sharing. The chains of {Cd(C₅H₅N)CH₂C(OH)(PO₃)(PO₃H)}_n are linked by inter-chain hydrogen bonds, forming a supramolecular layer. CCDC: 722396.     

Oxidation of N-acyl-2-(cycloalk-1-enyl)anilines with ozone and hydrogen peroxide

Treatment of the ozonization products from N-acetyl- or 2-methyl-N-trifluoroacetyl-6-(cyclopent-1-enyl)anilines with NaBH₄ gives 6-methyl-2-tetrahydropyranylaniline. When treated with Me₂S, the ozonization products yield the corresponding oxoaldehyde dimethyl acetals. The oxidation of N-acetyl-2-(cyclopent-1-enyl)- or -(cyclohex-1-enyl)anilines with H₂O₂ in HCOOH affords -(2-acetamidophenyl)-5-oxopentanoic or -6-oxohexanoic acid, respectively. The reaction of N-acetyl-2-(cyclopent-1-enyl)aniline with H₂O₂ in the presence of Na₂WO₄ and H₃PO₄ gives 3,1-benzooxazine in high yield.     

Medium effects in the electrosynthesis of succinic acid at a Ti/ceramic TiO<Subscript>2</Subscript> cathode

Succinic acid has been synthesized by galvanostatic electroreduction of maleic acid at a Ti/ceramic TiO₂ cathode in aqueous acidic, neutral and alkaline media in the divided or no divided cell. Effect of separators, current density and medium on the product yield and current efficiency for product formation has been discussed. The product succinic acid has been isolated and characterized by its melting point, IR and NMR.