Strongly anisotropic thermal conductivity in planar hexagonal borophene oxide sheet

The flat hexagonal borophene oxide (B₂O) has the highest Li storage capacity among existing two-dimensional materials. Thermal conductivity is an important parameter for the safety of Li-ion batteries. We investigate the lattice thermal conductivity of B₂O by solving phonon Boltzmann transport equation combined with the first-principles calculations. We found that the relaxation time approximation remarkably underestimate the thermal conductivity (κ) of monolayer B₂O, revealing phonon hydrodynamics characteristic. The κ of B₂O from the exact solution of Boltzmann transport equation is 53 W m⁻¹ K⁻¹ and 130 W m⁻¹ K⁻¹ along armchair-direction and zigzag-direction at 300 K, respectively. B₂O exhibits strong thermal transport anisotropy due to anisotropic phonon group velocity, obviously larger than that of other borophene allotropes. At room temperature, the phonon mean free path of B₂O is about 231 nm and 49 nm along armchair-direction and zigzag-direction, respectively. The highly anisotropic thermal conductivity of B₂O offers new possibilities for its applications in thermal management.     

A Boubaker polynomials expansion scheme (BPES)-related protocol for measuring sprayed thin films thermal characteristics

Measurements of In₂S₃ and ZnIn₂S₄ sprayed thin films thermal characteristics have been carried out using the photodetection technique. The thermal conductivity k and diffusivity D were obtained using a new protocol based on photothermal signal parameters analysis. Measured values of k and D were respectively, (15.2 ± 0.85) W m⁻¹K⁻¹ and (69.8 ± 7.1) × 10⁻⁶ m²s⁻¹ for In₂S₃, (7.2 ± 0.7) W m⁻¹K⁻¹ and (32.7 ± 4.3) × 10⁻⁶ m²s⁻¹ for ZnIn₂S₄. These values are extremely important since similar compounds are more and more proposed as Cd-free alternative materials for solar cells buffer layers.     

A new method for characterization of thermal properties of human enamel and dentine: Influence of microstructure

For better selection of “tooth-like” dental restorative materials, it is of great importance to evaluate the thermal properties of the human tooth. A simple method capable of non-destructively characterizing the thermal properties of the individual layers (dentine and enamel) of human tooth is presented. The traditional method of monotonic heating regime was combined with infrared thermography to measure the thermal diffusivities of enamel and dentine layers without physically separating them, with 4.08 (±0.178) × 10⁷ m²/s measured for enamel and 2.01 (±0.050) × 10⁷ m²/s for dentine. Correspondingly, the thermal conductivity was calculated to be 0.81 W/mK (enamel) and 0.48 W/mK (dentine). To examine the dependence of thermal conductivity on the configuration of dentine microstructure (microtubules), the Maxwell-Eucken and Parallel models of effective thermal conductivity are employed. The effective thermal conductivity of dentine in the direction parallel to tubules was found to be about 1.1 times higher than that perpendicular to the tubules, indicating weak anisotropy. By adopting the Series model, the bulk thermal conductivity of enamel and dentine layers is estimated to be 0.57 W/mK.     

Electrical and dielectric properties of β-BaB2O4 (BBO) and CsLiB6O10 (CLBO) crystals

In barium borate (BBO) crystals, sodium and potassium ions, inherited due to the preparation technique, are dominant charge carriers. The conductivity between layers is higher; the conductivity activation energy and the conductivity at 350 °C being equal to 1.01±0.05 eV and (1.3±0.2)×10⁻⁸ S/cm, respectively. The conductivity activation energy and the conductivity at 350 °C along the channels are equal to 1.13±0.05 eV and to (4±0.2)×10⁻⁹ S/cm, respectively. Relative static permittivity is almost isotropic, and equal to 7.65±0.05. Upon storing of cesium–lithium borate (CLBO) crystals, pre-heating to 600 °C eliminates the influence of surface humidity. At 500 K, the ionic conductivity ranges from 4×10⁻¹² to 2×10⁻¹⁰ S/cm; the conductivity activation energy ranges from 1.01 to 1.17 eV. Relative static permittivity is equal to 7.4±0.3.     

Thermoelectric properties of Cr1−xMoxSi2

The thermoelectric properties of Mo-substituted CrSi₂ were studied. Dense polycrystalline samples of Mo-substituted hexagonal C40 phase Cr_1−xMo_xSi₂ (x=0–0.30) were fabricated by arc melting followed by spark plasma sintering. Mo substitution substantially increases the carrier concentration. The lattice thermal conductivity of CrSi₂ at room temperature was reduced from 9.0 to 4.5 W m⁻¹ K⁻¹ by Mo substitution due to enhanced phonon–impurity scattering. The thermoelectric figure of merit, ZT, increases with increasing Mo content because of the reduced lattice thermal conductivity. The maximum ZT value obtained in the present study was 0.23 at 800 K, which was observed for the sample with x=0.30. This value is significantly greater than that of undoped CrSi₂ (ZT=0.13).     

Interfacial energies of carbon tetrabromide

The equilibrated grain boundary groove shapes for solid carbon tetrabromide (CTB) in equilibrium with its melt were directly observed by using a horizontal temperature gradient stage. From the observed grain boundary groove shapes, Gibbs–Thomson coefficient (Γ) and solid–liquid interfacial energy (σ_SL) and grain boundary energy (σ_gb) of CTB have been determined to be (7.88 ± 0.8) × 10⁻⁸ K m, (6.91 ± 1.04) × 10⁻³ J m⁻² and (13.43 ± 2.28) × 10⁻³ J m⁻², respectively. The ratio of thermal conductivity of equilibrated liquid phase to solid phase for CTB has also been measured to be 0.90 at its melting temperature. The value of σ_SL for CTB obtained in present work was compared with the values of σ_SL determined in the previous works for same material and it was seen that the present result is in good agreement with previous works.     

Structure,stability and electrical properties of the La(2−x)SrxMnO4±δ solid solution series

Single phase materials of the La_(2−x)Sr_xMnO_4±δ (0.6 ≤ x ≤ 2.0) solid solution series were prepared via solid state reaction. The structure of each material was examined at room temperature and determined to be tetragonal for all phases examined. An expansion in lattice volume was observed on increasing lanthanum content. The stability and thermal expansion of each member of the solid solution series was determined via the use of in situ high temperature X-ray diffraction. It was found that all materials remained stable up to a temperature of 800 °C. Thermal expansion coefficients were found to be in the region of 15 × 10^− 6 K^− 1 for La_(2−x)Sr_xMnO_4±δ compounds where x > 1.4. The electrical conductivity of each phase was also determined over a similar temperature range with a maximum value of ∼6 Scm^− 1 at 900 °C for the x = 1.8 phase.     

Structures and dynamics of dodecyldimethylamine oxide intercalated into RUB-18

A new proton-conducting intercalation system of a layered polysilicate compound, octosilicate (RUB-18), was synthesized by exchanging Na⁺ ion with half- and full-ionized dodecyldimethylamine oxides. RUB-18 intercalated by half-ionized dodecyldimethylamine oxide was shown to contain alkyl chains of the trans zigzag conformation by powder X-ray diffraction and ¹³C CP-MAS NMR measurements. The DC electrical conductivity and the distribution factor β of the relaxation time were determined to be 6.4×10⁻⁶ S m⁻¹ and 0.67, respectively, from Cole–Cole plots of the complex impedance measured at room temperature under the relative humidity of 100%.     

Electrically forced microthreading of highly viscous dielectric liquids

The behaviour of three high viscosity (4875, 12 125 and 58 560 mPa s), dielectric liquids was investigated at flow rates of 10⁻¹⁰, 10⁻¹² and 10⁻¹⁴ m³ s⁻¹ and the applied voltage range 6–15 kV. In these experiments, due to the low electrical conductivity of the liquids (10⁻¹³ S m⁻¹) and therefore the ensuing high electrical relaxation time, classical electrohydrodynamic atomization conditions are not satisfied. Only dripping and unstable jetting were observed at 4875 mPa s. A transition from no jetting to stable microthreading was observed for the 12 125 and 58 560 mPa s samples. The relics accompanying the transition were found to change from discrete droplets to a continuous filament. Stable microthreading, which generates uniform filaments, was obtained for the 12 125 mPa s sample at flow rates 10⁻¹⁰ and 10⁻¹² m³ s⁻¹ and in the case of the 58 560 mPa s sample at all the flow rates investigated. The high viscosity assisted stable microthreading with the filament diameter decreasing with increasing applied voltage and more dramatically decreasing with reducing flow rate.     

Ionic conductivity of brownmillerite-type calcium ferrite under oxidizing conditions

The thermogravimetric and Mössbauer spectroscopy studies showed that, at atmospheric oxygen pressure, the oxygen content in Ca₂Fe₂O₅ brownmillerite is very close to stoichiometric at 300–1270 K. The orthorhombic lattice of calcium ferrite undergoes a transition from primitive (space group Pnma) to body-centered (I2mb) at 950–1000 K, which is accompanied with decreasing thermal expansion coefficient (TEC) and increasing activation energy for the total conductivity, predominantly p-type electronic. The steady-state oxygen permeation through dense Ca₂Fe₂O₅ ceramics is limited by the bulk ionic conduction. The ion transference numbers in air vary in the range 0.002–0.007 at 1123–1273 K, increasing with temperature. Analysis of stereological factors, which may affect oxygen diffusivity, suggests a dominant role of the ion jumps along octahedral and, possibly, tetrahedral layers of the brownmillerite structure. The ionic conductivity of calcium ferrite is higher than that of Ca₂FeAlO_5+δ, but lower compared to the oxygen-deficient perovskite phases based on SrFeO_3−δ where the diffusion pathways form a three-dimensional network. The average TECs of Ca₂Fe₂O₅ ceramics, calculated from dilatometric data in air, are 13.1 × 10^− 6 K^− 1 at 370–950 K and 11.3 × 10^− 6 K^− 1 at 970–1270 K.     

Study on ionic conductivity of polymer electrolyte plasticized with PEG–aluminate ester for rechargeable lithium ion battery

We have synthesized poly(ethylene glycol) (PEG)-aluminate ester as a plasticizer for solid polymer electrolytes. The thermal stability, ionic conductivity and electrochemical stability of the polymer electrolyte which consist of poly(ethylene oxide) (PEO)-based copolymer, PEG–aluminate ester and lithium bis-trifluoromethanesulfonimide (LiTFSI) were investigated. Addition of PEG–aluminate ester increased the ionic conductivity of the polymer electrolyte, showing greater than 10^− 4 S cm^− 1 at 30 °C. The polymer electrolyte containing PEG–aluminate ester retained thermal stability of the non-additive polymer electrolyte and exhibited electrochemical stability up to 4.5 V vs. Li⁺/Li at 30 °C.     

Fiber curvature sensor based on spherical-shape structures and long-period grating

A novel curvature sensor based on optical fiber Mach–Zehnder interferometer (MZI) is demonstrated. It consists of two spherical-shape structures and a long-period grating (LPG) in between. The experimental results show that the shift of the dip wavelength is almost linearly proportional to the change of curvature, and the curvature sensitivity are −22.144 nm/m⁻¹ in the measurement range of 5.33–6.93 m⁻¹, −28.225 nm/m⁻¹ in the range of 6.93–8.43 m⁻ and −15.68 nm/m⁻¹ in the range of 8.43–9.43 m⁻¹, respectively. And the maximum curvature error caused by temperature is only −0.003 m⁻¹/°C. The sensor exhibits the advantages of all-fiber structure, high mechanical strength, high curvature sensitivity and large measurement scales.     

Synthesis and investigations on the stability of La0.8Sr0.2CuO2.4+δ at high temperatures

For application in solid oxide fuel cells La_0.8Sr_0.2CuO_2.4+δ was synthesized and the phase evolution was characterized after quenching from different temperatures and after slow cooling. A single phase perovskite was found after quenching from 950 °C. The electrical conductivity of the La_0.8Sr_0.2CuO_2.4+δ perovskite exhibited metallic behavior reaching values of about 270 S/cm at 800 °C in air. The thermal expansion between 30 and 800 °C gave a thermal expansion coefficient of 11.1 × 10^− 6 K^− 1.At higher temperatures, the perovskite was transformed to the K₂NiF₄-type structure via an intermediate stage that can be best described as a LaSrCuO₄ phase with preferential growing of {020} lattice planes. After sintering at 1100 °C and slow cooling in the furnace a phase mixture of (La,Sr)CuO_4+δ and (La,Sr)CuO_2.4+δ perovskite was obtained. This phase mixture showed higher electrical conductivity (400 S/cm at 800 °C) and smaller thermal expansion coefficient (9.6 × 10^− 6 K^− 1) than the single phase La_0.8Sr_0.2CuO_2.4+δ perovskite.     

Ionic and electronic conductivities,stability and thermal expansion of La10 − x(Si,Al)6O26 ± δ solid electrolytes

Apatite-type La_10 − xSi_6 − yAl_yO_{27 − 3x/2 − y/2} (x = 0–0.33; y = 0.5–1.5) exhibit predominant oxygen ionic conductivity in a wide range of oxygen partial pressures. The conductivity of silicates containing 26.50–26.75 oxygen atoms per formula unit is comparable to that of gadolinia-doped ceria at 770–870 K. The average thermal expansion coefficients are (8.7–10.8) × 10^− 6 K^− 1 at 373–1273 K. At temperatures above 1100 K, silicon oxide volatilization from the surface layers of apatite ceramics and a moderate degradation of the ionic transport with time are observed under reducing conditions, thus limiting the operation temperature of Si-containing solid electrolytes.     

Electronic conductivity and chemical diffusion in n-conducting barium titanate ceramics at high temperatures

The electronic conductivity as well as the chemical diffusion coefficient of barium titanate ceramics doped with Y and Mn (donor-doped and acceptor co-doped) have been determined by application of conductivity relaxation experiments. The equilibrium values of the electronic conductivity of n-conducting BaTiO₃ have been analyzed by application of a defect chemical model involving electrons and cation vacancies as the predominant defect species at oxidizing conditions (fairly high oxygen partial pressures). The relaxation curves of the electronic conductivity yield the chemical diffusion coefficient of the bulk by employing a spherical grain model where the appropriate diffusion length is the radius of grains (average grain size). The conductivity relaxation experiments have been performed as a function of temperature ranging from 1100 to 1250 °C at oxygen partial pressures between 0.01 and 1 bar. The kinetics of the oxygen exchange process can be interpreted in terms of extremely fast diffusion of oxygen via oxygen vacancies along the grain boundaries and slow diffusion of Ti (cation)-vacancies from the grain boundaries into the grains. The Ti-vacancy diffusion coefficients were extracted from the chemical diffusion coefficients as a function of temperature. Typical values for the Ti-vacancy diffusivity are around 10^− 15 cm² s^− 1 with an activation energy of 3.9 ± 0.7 eV.     

Thermal and electrical conductivities of silver–indium–tin alloys

The variations of thermal conductivity with temperature for the Ag–[x] wt% Sn–20 wt% In alloys (x=8, 15, 35, 55 and 70) were measured using a radial heat flow apparatus. From the graphs of thermal conductivity versus temperature, the thermal conductivities of solid phases at their melting temperature for the Ag–[x] wt% Sn–20 wt% In alloys (x=8, 15, 35, 55 and 70) were found to be 46.9±3.3, 53.8±3.8, 61.2±4.3, 65.1±4.6 and 68.1±4.8 W/Km, respectively. The variations of electrical conductivity of solid phases versus temperature for the same alloys were determined from the Wiedemann–Franz equation using the measured values of thermal conductivity. From the graphs of electrical conductivity versus temperature, the electrical conductivities of the solid phases at their melting temperatures for the Ag–[x] wt% Sn–20 wt% In alloys (x=8, 15, 35, 55 and 70) alloys were obtained to be 0.036, 0.043, 0.045, 0.046 and 0.053 (×10⁸/Ωm), respectively. Dependencies of the thermal and electrical conductivities on the composition of Sn in the Ag–Sn–In alloys were also investigated. According to present experimental results, the thermal and electrical conductivities for the Ag–[x] wt% Sn–20 wt% In alloys linearly decrease with increasing the temperature and increase with increasing the composition of Sn.     

Transport properties and structural stability of tetragonal CeNbO4+δ

The electrical properties of CeNbO_4+δ have been investigated at 1073–1223 K in the oxygen partial pressure range 10^− 17 to 0.36 atm. The conductivity and Seebeck coefficient behaviour indicates that, at oxygen chemical potentials close to atmospheric, tetragonal CeNbO_4+δ possesses a mixed ionic and p-type electronic conductivity. The ion transference numbers under the p(O₂) gradient of 0.93/0.21 atm, measured by the modified e.m.f. technique, are close to 0.4 decreasing in more reducing environments. The variations of partial ionic and electronic conductivities can be described in terms of the oxygen intercalation into the scheelite-type lattice, which results in increasing concentrations of both dominant charge carriers, oxygen interstitials and holes, when p(O₂) increases. Reduction leads to p(O₂)-independent electrical properties, followed by a drastic decrease in the conductivity at oxygen pressures below 10^− 15–10^− 9 atm due to a reversible transition into the monoclinic phase. Contrary to the zircon-type CeVO_4±δ, no traces of the parent binary oxides were detected in the reduced cerium niobate.     

Bulk and surface properties of ionic salt CsH5(PO4)2

We report a comparative study of transport and thermodynamic properties of single-crystal and polycrystalline samples of the ionic salt CsH₅(PO₄)₂ possessing a peculiar three-dimensional hydrogen-bond network. The observed potential of electrolyte decomposition ≈ 1.3 V indicates that the main charge carriers in this salt are protons. However, in spite of the high proton concentration, the conductivity appears to be rather low with a high apparent activation energy E_a ≈ 2 eV, implying that protons are strongly bound. The transport anisotropy though is not large, correlates with the crystal structure: the highest conductivity is found in the [001] direction (σ_130 °C ∼ 5.6 × 10^− 6 S cm^− 1) while the minimal conductivity is in the [100] direction (σ_130 °C ∼ 10 ⁻⁶ S cm^− 1). The conductivity of polycrystalline samples appears to exceed the bulk one by 1–3 orders of magnitude with a concomitant decrease of the activation energy (E_a ≈ 1.05 eV), which indicates that a pseudo-liquid layer with a high proton mobility is formed at the surface of grains. Infrared and Raman spectroscopy used to study the dynamics of the hydrogen-bond system in single-crystal and polycrystalline samples have confirmed the formation of such a modified surface layer in the latter. However, no bulk phase transition into the superionic disordered phase is observed in CsH₅(PO₄)₂ up to the melting point T_melt ∼ 151.6 °C, in contrast to its closest relative compound CsH₂PO₄.     

Electrical transport and crystallization in Cu+ ion substituted AgI–Ag2O–V2O5 glassy superionic system

A new glassy solid electrolyte system Cu_xAg_1 − xI–Ag₂O–V₂O₅ has been synthesized. The structural, thermal and electrical properties of the samples have been investigated. The glassy nature of the samples is confirmed by X-Ray diffraction and Differential Scanning Calorimetry studies. The electrical conductivity of these samples increases with CuI content and approaches a maximum value of ∼ 10⁻² Ω^− 1 cm^− 1 for x = 0.35 at room temperature. Ionic mobility measurements suggest that enhancement in the conductivity with Cu⁺ ion substitution may be attributed to increase in the mobility of Ag⁺ ions. The electrical conductivity versus temperature cycles carried out at well-controlled heating rate above T_g and T_c reveal interesting thermal properties. For lower CuI content samples conductivity exhibits anomalous rise above T_g and subsequent fall at T_c. It is also found that CuI addition into AgI–Ag₂O–V₂O₅ matrix reduces the extent of crystallization.     

Preparation of poly(vinyl phosphate-b-styrene) copolymers and its blend with PPO as proton exchange membrane for DMFC applications

Poly(vinyl phosphate-b-styrene) (poly(VPP-b-St)) block copolymers were prepared via consecutive telomerization of vinyl acetate (VAc), atom transfer radical polymerization (ATRP) with styrene, saponification, and phosphorylation with phosphorus oxychloride. The resulting block copolymers were characterized by FT-IR and pH titration. Then, the block copolymers were blended with poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) to prepare direct methanol fuel cell (DMFC) membrane. The performance of poly(VPP-b-St)/PPO blend membranes was measured in terms of proton conductivity, methanol permeability, thermal and hydrolytic stability. The proton conductivities were in the range of 10^− 4 to 10^− 2 S/cm (60 °C, RH = 95%); the methanol permeabilities were in the range of 4.14 × 10^− 8 to 9.62 × 10^− 8 cm²/s (25 °C), and quite lower than that of Nafion® 117. Also, the thermal stability of the blend membranes was characterized by TGA, and was stable up to 400 °C; the blend membranes had better hydrolytic stability.