A combined electrochemical route to fabricate large-area and free-standing inverse opaline film

A combined electrochemical route involving electrophoresis and electrodeposition is developed to fabricate a large-area unsupported nickel inverse opaline film with thickness less than 10 μm. A vertical electrophoresis allows for the packing of 495 nm polystyrene microspheres on an ITO-coated glass to form a colloidal crystal with significantly reduced defects. Subsequently, a nickel electrodeposition is employed to fill the interstitial voids among the close-packed polystyrene microspheres, followed by the removal of the colloidal template in a two-stage process, leaving a robust nickel skeleton with hexagonally arranged pores and interconnected pore channels. This nickel skeleton is then detached from the ITO-coated glass via a liquid nitrogen treatment, rendering a free-standing nickel inverse opaline film in 2 × 2 cm². Porometer measurements indicate a narrow pore size distribution consistent with images from scanning electron microscope. We determine that the intensity ratio of (111)/(100) diffraction peak is an indicator for the strength of the Ni inverse opals, and thus affects its structural integrity upon detachment from the ITO-coated glass.     

Layer-by-layer nanoparticle coatings on lignocellulose wood microfibers

The layer-by-layer (LbL) self-assembly technique was applied to deposit organized multilayers of TiO₂ or SiO₂ nanoparticles of 30–80 nm diameter, and 50-nm diameter halloysite clay nanotubes on softwood fibers. Fluorescent and scanning electron microscopy images showed complete nanoparticle coating on these fibers. The thickness of the two-layer coating was estimated as 46, 58, and 115 nm for TiO₂, SiO₂, and halloysite tubules, respectively, which corresponds to ca. 1 wt% nanoparticle loading of the fibers. The brightness test of paper handsheets prepared from nanocoated fibers showed that TiO₂ nanoparticle coating gave handsheet reflectance of 84% at 450 nm, which is 4% higher than the brightness of the control sample from virgin fibers. The paper handsheets prepared with nanoparticle-coated fibers had 30–50% higher porosity with tensile strength index retained close to the control sample.     

Two-color emission of Zn2SiO4:Mn from ionic liquid mediated synthesis

Yellow emitting β-Zn₂SiO₄:Mn²⁺ and green emitting α-Zn₂SiO₄:Mn²⁺ nanoparticles are synthesized by nucleation applying a zinc-containing ionic liquid. As-prepared material is non-agglomerated and very uniform with a mean diameter of 32 nm. According to X-ray diffraction (XRD) two crystallographic different modifications of Zn₂SiO₄ can be realized by annealing of as-prepared and non-crystalline nanomaterial at 750 and 1000 °C. Surprisingly, these crystalline materials are still nanosized, non-agglomerated and redispersible. Scanning electron microscopy (SEM) and dynamic light scattering (DLS) confirm particle diameters of 18 nm (β-Zn₂SiO₄:Mn²⁺) and 14 nm (α-Zn₂SiO₄:Mn²⁺). Photoluminescence indicates Mn²⁺-related emission at an average wavelength of 579 nm and 528 nm, and a quantum yield of 7% and 12% for β-Zn₂SiO₄:Mn²⁺ and α-Zn₂SiO₄:Mn²⁺, respectively.     

Molybdic acid doped polyaniline micro/nanostructures via a self-assembly process

Molybdic acid (H₂MoO₄, MA) doped polyaniline (PANI) micro/nanostructures were prepared by a self-assembly process in the presence of ammonium persulfate ((NH₄)₂S₂O₈, APS) as the oxidant. The morphology of PANI-MA changed from nanofibers or nanotubes (～160 nm in diameter) to co-existence of nanofibers and microspheres (～3 μm in diameter) and that accompanied an enhancement of the conductivity from 5.42 × 10^?3 S cm^?1 to 2.8 × 10^?1 S cm^?1as the molar ratio of MA to aniline varied from 0.01 to 1.5. With increasing the polymerization time, moreover, the pH value of the reaction solution not only decreased due to sulfuric acid produced during the course of the polymerization, but also accompanied a change in morphology from microspheres to nanofibers. All above-mentioned observations could be interpreted by spherical and cylindrical micelle composed of MA as the “soft-template” in forming the micro/nanostructures.     

Assembly of NaTaO3 porous microspheres via imperfect oriented attachment mechanism

Spongy-like NaTaO₃ mesoporous microspheres are assembled from nanoparticles via imperfect oriented attachment. Study shows that the NaTaO₃ spongy microspheres with the diameters of ～1 μm are composed of the fundamental building blocks of ～50 nm NaTaO₃ nanospheres. The high-resolution transmission electron microscopy further reveals that these fundamental building blocks are assembled from primary building blocks of ～10 nm NaTaO₃ nanocrystals. The pore diameters of these spongy microspheres are ca. 30 nm and the Brunauer–Emmett–Teller (BET) surface area is calculated to be 57.8 m² g^?1. This interesting ternary alkali metal composite oxide of NaTaO₃ spongy microspheres with high specific surface area and strong stability will be favorable for their practical application in photocatalysis. This synthesis route may throw light on the fabrication of the binary or ternary porous metal oxides by geometrical stacking of the nanobuilding blocks via imperfect oriented attachment.     

Self-assembled Nafion–silica nanoparticles for elevated-high temperature polymer electrolyte membrane fuel cells

In this paper, a novel Nafion/SiO₂ nanocomposite membrane based on the self-assembled Nafion–SiO₂ nanoparticles was developed. The average particle size of Nafion–SiO₂ nanoparticles prepared by self-assembly process was 2.8 ± 0.5 nm. The self-assembled Nafion–SiO₂ nanoparticles significantly enhance the durability of the Nafion/silica nanocomposite membrane as compared to that of conventional Nafion/silica composite and Nafion 212 membranes under wet/dry cyclic tests at 90 °C. With an addition of 5 wt% self-assembled Nafion–SiO₂ nanoparticles, the Nafion/SiO₂ nanocomposite membrane shows a significantly improved performance stability at cell/humidifying temperatures of 100 °C/60 °C under a current density of 600 mA/cm², and the degradation rate is 0.12 mV/min, almost 20 times lower than 2.33 mV/min measured on the pristine Nafion 212 membrane under the same conditions. The present results demonstrate the promises of the self-assembled Nafion/SiO₂ nanocomposite membrane for elevated-high temperature PEM fuel cells applications.     

Photocatalytic activity of TiO2 nanotube layers loaded with Ag and Au nanoparticles

Ag and Au nanoparticles were found to significantly enhance the photocatalytic activity of self-organized TiO₂ nanotubular structures. The catalyst systems are demonstrated to be highly efficient for the UV-light induced photocatalytic decomposition of a model organic pollutant – Acid Orange 7. The metallic nanoparticles with a diameter of ∼10 ± 2 nm (Ag) and ∼28 ± 3 nm (Au) were attached to a nanotubular TiO₂ layer that consists of individual tubes of ∼100 nm of diameter, ∼2 μm in length and approx. 15 nm of wall thickness. Both metal particle catalyst systems enhance the photocatalytic decomposition significantly more on the nanotubes support than placed on a compact TiO₂ surface.     

Electrochemically synthesized CdS nanoparticle-modified TiO2 nanotube-array photoelectrodes: Preparation,characterization, and application to photoelectrochemical cells

A novel electrodeposited CdS nanoparticle-modified highly-ordered TiO₂ nanotube-array photoelectrode and its application to photoelectrochemical cells is reported. Results show formation of a thin, nanoparticulate CdS layer, comprised of sphere-like 10–20 nm diameter nanoparticles, on the anodic synthesized TiO₂ nanotube-array (inner diameter of 70 nm, wall thickness 25 nm and ca. 400 nm length) electrode. The resulting CdS–TiO₂ photoelectrode has an as-fabricated bandgap of 2.53, and 2.41 eV bandgap after sintering at 350 °C in N₂ ambient. Photoelectrochemical properties are described in detail.     

Nano-Ag complexes prepared by γ-radiolysis and their structures and physical properties

In this study, nano-silver (nano-Ag) complexes showing different properties have been synthesized as follows. Polypyrrolidone (PVP)-stabilized silver colloids (NAg), nano-Ag bound to silica (SiO₂) (NSS), and nano-Ag bound to a complex of SiO₂ and polyaniline (PANI) (NSSPAI) were prepared via γ-irradiation at room temperature. NAg and NSS used PVP as a colloidal stabilizer, while NSSPAI did not use PVP as a colloidal stabilizer. Interesting bonding properties occurred in the nano-Ag complex and anticipated structural changes were clearly shown through a surface analysis of x-ray photoelectron spectroscopy (XPS). The morphologies by field emission-scanning electron microscopy (FE-SEM) analysis showed that nano-Ag complexes have various particle sizes ranging from 10 to 30 nm. NSS (average, 10 nm) and NSSPAI (average, 30 nm) showed a uniformly spherical shape and size, while NAg did not. From the reflection peaks in the x-ray diffraction (XRD) patterns, surface crystallinity of the nano-Ag complexes was indicated to be in the same degree as that of NSSPAI>NSS>NAg. Also, in the contact angle (CA) determination, surface hydrophobicity of NSSPAI was stronger than those of NSS and NAg, relatively. The different nano-Ag complexes prepared by γ-irradiation can be applicable in various industry fields due to the increase in specific property.     

Bismuth as an additive modifying the selectivity of palladium catalysts

The influence of bismuth addition on the activity and selectivity of palladium catalysts supported on SiO₂ in the reaction of glucose oxidation to gluconic acid was studied. The catalysts modified with Bi show much better selectivity and activity than palladium catalysts. The XRD studies proved the presence of intermetallic compounds BiPd and Bi₂Pd, which probably increase activity and selectivity of PdBi/SiO₂ catalysts in the oxidation of glucose. The TPO studies of catalysts containing 5 wt.% Pd/SiO₂, 3 wt.% Bi/SiO₂ and 5 wt.% Pd–5 wt.% Bi/SiO₂ show that palladium oxidation occurs at much higher temperatures than in the case of bismuth. The maximum rate of Pd oxidation occurs at around 580 K while the maximum rate of Bi oxidation takes place at around 430 K. Considering the above facts, a reaction involving bimetallic catalysts in oxidizing atmosphere at 333 K should not lead to surface oxidation of palladium and thus their deactivation.     

Iron (III) nanocomposites for enzyme-less biomimetic cathode: A promising material for use in biofuel cells

In this paper, we discuss the synthesis and electrochemical properties of a new material based on iron oxide nanoparticles stabilized with poly(diallyldimethylammonium chloride) (PDAC); this material can be used as a biomimetic cathode material for the reduction of H₂O₂ in biofuel cells. A metastable phase of iron oxide and iron hydroxide nanoparticles (PDAC–FeOOH/Fe₂O₃-NPs) was synthesized through a single procedure. On the basis of the Stokes–Einstein equation, colloidal particles (diameter: 20 nm) diffused at a considerably slow rate (D = 0.9 × 10^? 11 m s^? 1) as compared to conventional molecular redox systems. The quasi-reversible electrochemical process was attributed to the oxidation and reduction of Fe³⁺/Fe²⁺ from PDAC–FeOOH/Fe₂O₃-NPs; in a manner similar to redox enzymes, it acted as a pseudo-prosthetic group. Further, PDAC–FeOOH/Fe₂O₃-NPs was observed to have high electrocatalytic activity for H₂O₂ reduction along with a significant overpotential shift, ΔE = 0.68 V from ? 0.29 to 0.39 V, in the presence and absence of PDAC–FeOOH/Fe₂O₃-NPs. The abovementioned iron oxide nanoparticles are very promising as candidates for further research on biomimetic biofuel cells, suggesting two applications: the preparation of modified electrodes for direct use as cathodes and use as a supporting electrolyte together with H₂O₂.     

Polystyrene microspheres based sandwich immunosensor using CdTe nanoparticles amplification and ultrasensitive flow-injection chemiluminescence detection

In this paper we propose a specific sandwich immunoassay method for human-immunoglobulin G (HIgG). This immunoassay protocol takes advantage of sandwich binding of primary and secondary antibodies for increased specificity. Polystyrene microspheres (PS) serve as immobilizing support, site for sandwich immunoassay and then subsequently used for chemiluminescence (CL) detections. In this sandwich immunoassay, PS microspheres were modified with the primary anti-HIgG (Ab₁) via electrostatic interaction, while CdTe nanoparticles (CdTeNPs) were modified with horseradish peroxidase labeled anti-HIgG (Ab₂) via covalent binding. Antigen HIgG (Ag) was specifically captured by the first and secondary antibody and form sandwich immunoassay format. Combination of the remarkable sensitivity of CL method and the use of CdTe NPs as anti-HIgG–HRP carrier for the enzymatic signal amplification, provide a linear response range of HIgG from 0.01 to 300 ng mL⁻¹ with an extremely low detection limit of 0.3 pg mL⁻¹. This immunoassay system has many desirable merits including sensitivity, accuracy, and little required instrumentation. The assay results were compared with enzyme-linked immunosorbent assay (ELISA), and showed relatively good reliability. Significantly the new protocol may become quite promising technique for protein immune-detection as well as DNA analysis and other biological analyses.     

Synthesis and characterization of high surface area TiO2/SiO2 mesostructured nanocomposite

Recently titania synthesis was reported using various structuration procedures, leading to the production of solid presenting high surface area but exhibiting moderate thermal stability. The study presents the synthesis of TiO₂/SiO₂ nanocomposites, a solid that can advantageously replace bulk titania samples as catalyst support. The silica host support used for the synthesis of the nanocomposite is a SBA-15 type silica, having a well-defined 2D hexagonal pore structure and a large pore size. The control of the impregnation media is important to obtain dispersed titania crystals into the porosity, the best results have been obtained using an impregnation in an excess of solvent. After calcination at low temperature (400 °C), nanocomposites having titania nanodomains (～2–3 nm) located inside the pores and no external aggregates visible are obtained. This nanocomposite exhibits high specific surface area (close to that of the silica host support, even with a titania loading of 55 wt.%) and a narrow pore size distribution. Surprisingly, the increase in calcination temperature up to 800 °C does not allow to detect the anatase to rutile transition. Even at 800 °C, the hexagonal mesoporous structure of the silica support is maintained, and the anatase crystal domain size is evaluated at ～10 nm, a size close to that of the silica host support porosity (8.4 nm). Comparison of their physical properties with the results presented in literature for bulk samples evidenced that these TiO₂/SiO₂ solids are promising in term of thermal stability.     

Nanorods of transition metal oxalates: A versatile route to the oxide nanoparticles

A versatile route has been explored for the synthesis of nanorods of transition metal (Cu, Ni, Mn, Zn, Co and Fe) oxalates using reverse micelles. Transmission electron microscopy shows that the as-prepared nanorods of nickel and copper oxalates have diameter of 250 nm and 130 nm while the length is of the order of 2.5 μm and 480 nm, respectively. The aspect ratio of the nanorods of copper oxalate could be modified by changing the solvent. The average dimensions of manganese, zinc and cobalt oxalate nanorods were 100 μm, 120 μm and 300 nm, respectively, in diameter and 2.5 μm, 600 nm and 6.5 μm, respectively, in length. The aspect ratio of the cobalt oxalate nanorods could be modified by controlling the temperature.The nanorods of metal (Cu, Ni, Mn, Zn, Co and Fe) oxalates were found to be suitable precursors to obtain a variety of transition metal oxide nanoparticles. Our studies show that the grain size of CuO nanoparticles is highly dependent on the nature of non-polar solvent used to initially synthesize the oxalate rods. All the commonly known manganese oxides could be obtained as pure phases from the single manganese oxalate precursor by decomposing in different atmospheres (air, vacuum or nitrogen). The ZnO nanoparticles obtained from zinc oxalate rods are ～55 nm in diameter. Oxides with different morphology, Fe₃O₄ nanoparticles faceted (cuboidal) and Fe₂O₃ nanoparticles (spherical) could be obtained.     

Fabrication and magnetic properties of electrospun copper ferrite (CuFe2O4) nanofibers

Tetragonal copper ferrite (CuFe₂O₄) nanofibers were fabricated by electrospinning method using a solution that contained poly(vinyl pyrrolidone) (PVP) and Cu and Fe nitrates as alternative metal sources. The as-spun and calcined CuFe₂O₄/PVP composite samples were characterized by TG-DTA, X-ray diffraction, FT-IR, and SEM, respectively. After calcination of the as-spun CuFe₂O₄/PVP composite nanofibers (fiber size of 89 ± 12 nm in diameter) at 500 °C in air for 2 h, CuFe₂O₄ nanofibers of 66 ± 13 nm in diameter having well-developed tetragonal structure were successfully obtained. The crystal structure and morphology of the nanofibers were influenced by the calcination temperature. After calcination at 600 and 700 °C, the nature of nanofibers changed which was possibly due to the reorganization of the CuFe₂O₄ structure at high temperature, and a fiber structure of packed particles or crystallites was prominent. Crystallite size of the nanoparticles contained in nanofibers increases from 7.9 to 23.98 nm with increasing calcination temperature between 500 and 700 °C. Room temperature magnetization results showed a ferromagnetic behavior of the calcined CuFe₂O₄ samples, having their specific saturation magnetization (M_s) values of 17.73, 20.52, and 23.98 emu/g for the samples calcined at 500, 600, and 700 °C, respectively.     

Synthesis of silver nanoparticles supported on silica aerogel using gamma radiolysis

Silver clusters on SiO₂ support have been synthesized using ⁶⁰Co gamma radiation. The irradiation of Ag⁺ in aqueous suspension of SiO₂ in the presence of 0.2 mol dm⁻³ isopropanol resulted in the formation of yellow suspension. The absorption spectrum showed a band at 408 nm corresponding to typical characteristic surface plasmon resonance of Ag nanoparticles. The effect of Ag⁺ concentration on the formation of Ag cluster indicated that the size of Ag clusters vary with Ag⁺ concentration, which was varied from 4×10⁻⁴ to 5×10⁻³ mol dm⁻³. The results showed that Ag clusters are stable in the pH range of 2–9 and start agglomerating in the alkaline region at pH above 9. The effect of radiation dose rate and ratio of Ag⁺/SiO₂ on the formation of Ag clusters have also been investigated. The prepared clusters have been characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM), which showed the particle size of Ag clusters to be in the range of 10–20 nm.     

Synthesis and characterization of amino-functionalized single magnetic core–silica shell composites

The thermal decomposition approach, reverse micro-emulsion system and surface modification technique had been successfully used to synthesis single magnetic core Fe₃O₄@Organic Layer@SiO₂–NH₂ complex microspheres. The magnetization of the magnetic microspheres core could be easily tuned between 28 and 56 emu/g by adjusting the amount of 2-mercaptobarbituric acid. It was found that the Organic Layer to some extent had a protective effect on avoiding Fe₃O₄ being oxidized into Fe₂O₃. Each Fe₃O₄@Organic Layer microsphere could be coated uniformly by about 30 nm of silica shell. The average diameter of the Fe₃O₄@Organic Layer@SiO₂ composites was about 538 nm. The saturation magnetization of the Fe₃O₄@Organic Layer@SiO₂ complex microspheres was 12.5% less than magnetic microspheres cores. The Fe₃O₄@Organic Layer@SiO₂–NH₂ composites possessed a huge application potentiality in specificity enriching and separating biological samples.     

Determination of hydrogen sulfide in gasoline by Au nanoclusters modified glassy carbon electrode

A promising hydrogen sulfide (H₂S) sensor was prepared by electrodeposition of Au nanoclusters on glassy carbon electrode (GCE) and the surface structure was characterized by SEM and EDAX. These flower-like form Au nanoclusters, which were made up of highly dense clustering Au nanorods with an average diameter of 20 nm and length up to 80 nm, had an average size about 600 nm and uniformly distributed on the GCE surface. The electrocatalytic oxidation of H₂S in gasoline was performed on this modified electrode, which had a satisfactory liner response to H₂S in the range of 1–80 ppm and a detection limit of 0.45 ppm (s/n = 3). This sensor was sensitive, selective and stable.     

Electrochemical formation of self-organized zirconium titanate nanotube multilayers

The present work reports the formation of multilayers of self-organized zirconium titanate nanotubes by anodizing a Ti–35Zr alloy in 1 M (NH₄)₂SO₄ + 0.5 wt% NH₄F electrolytes. It was found that multilayers consisting of different diameter nanotubes can be produced by repeated anodization steps under different conditions. Formation of new nanotubes starts in the gaps between the existing tubes. The process allows the formation of multilayer stacks consisting of layers of several 100 nm in length and adjustable nanotube diameters in a range from 50 to 180 nm.     

Surface-enhanced Raman studies of bradykinin using colloidal gold

In this paper, bradykinin (BK), an endogenous peptide hormone, which is involved in a number of physiological and pathophysiological processes was deposited onto the colloidal Au nanoparticles. The surface-enhanced Raman spectroscopy (SERS) was used to determine the adsorption mode of BK under different environmental conditions, including: excitation wavelengths (514.5 nm and 785.0 nm), pH of aqueous sol solutions (from pH = 3 to pH = 11), and size of the colloidal nanoparticles (10, 20, and 50 nm). The metal surface plasmon of the colloidal suspended Au nanoparticles was examined by ultraviolet-visible (UV–vis) spectroscopy. The results showed that the C-terminal part of BK plays a crucial role in the adsorption process onto the colloidal suspended Au particles. The Phe^5/8 and Arg⁹ residues of BK mainly participate in the interactions with the colloidal Au nanoparticles. At acidic pH of the solution (pH = 3), the BK COO⁻ terminal group through the both oxygen atoms strongly binds to the Au nanoparticles. The Phe⁵/Phe⁸ rings adopt tilted orientation with respect to the colloidal Au nanoparticles with diameters of 10 and 20 nm. As the particle size increases to 50 nm, the flat orientation of the Phe ring(s) with respect to the Au nanoparticles is observed.