A revised quantum chemistry-based potential for poly(ethylene oxide) and its oligomers in aqueous solution

We have conducted a high-level quantum chemistry study of the interactions of 1,2-dimethoxyethane (DME) with water for complexes representing both hydrophilic and hydrophobic hydration. It was found that our previous quantum chemistry-based force field for poly(ethylene oxide) (PEO) and its oligomers in aqueous solution did a poor job in describing the hydrophobic binding of water to the ether, consistent with our recent calculations of the excess free energy and entropy of hydration of DME. Our original force field was revised to more accurately reproduce the interaction of water with the carboneous portions of DME. Molecular dynamics simulations of aqueous DME solutions using the revised quantum chemistry-based potential yielded good agreement with experiment for excess free energy, enthalpy, and volume as well as excess solution viscosity and the self-diffusion of water. Comparison with our original potential revealed that the relatively hydrophobic ether-water interactions in the new potential strongly reduced the favorable excess free energy and enthalpy but have relatively little influence on the excess entropy for dilute DME solutions. Other properties of DME and PEO solutions including conformational populations and dynamics, solution viscosity, hydrogen bonding, water translational and rotational diffusion and neutron structure factor as a function of solution composition were found to be largely unchanged from those obtained using the original potential.     

Formation, structure, and reactivity of amino-terminated organic films on silicon substrates

Amino-functionalized organic films were prepared by self-assembling 3-aminopropyltriethoxysilane (APTES) on silicon wafers in either anhydrous toluene or phosphate-buffered saline (PBS) for varied deposition times. Fourier transform infrared spectroscopy (FTIR) and ellipsometry have shown that the structure and thickness of APTES films are governed by the deposition time and reaction solution. Deposition from an anhydrous toluene solution produces APTES films ranging from 10 to 144 A in thickness, depending on the reaction time. FTIR spectra indicate that film growth initially proceeds by adsorption of APTES to the silicon surface followed by siloxane condensation, and after an extended period of time APTES molecules accumulate on the underlying APTES film by either covalent or noncovalent interactions. In contrast, spectroscopically indistinguishable APTES films in thickness ranging from 8 to 13 A were formed when deposition was conducted in aqueous solutions. Measured water contact angles indicate that APTES films deposited in aqueous solutions are more hydrophilic compared to those prepared in toluene solutions. Fluorescence measurements revealed that APTES films prepared in toluene solutions contain more reactive surface amino groups by ca. 3 to 10 times than those prepared in aqueous solutions for the identical reaction time.     

Aggregates of amphiphilic fluorinated copolymers and their encapsulating and unloading homopolymer behaviors

Amphiphilic fluorinated block copolymers synthesized via reversible addition‐fragmentation chain transfer polymerization were used for the preparation of aggregates of various morphologies. First, dissolve the copolymer in 2‐butanone; second, add a precipitant solvent, which was the mixture of water and methanol, to induce the aggregation of the hydrophobic fluorinated block. With a hydrophilic tail and a very hydrophobic segment, these copolymers are likely to self‐assemble in solution and form aggregates. Observed by TEM, spheres, rods, and vesicles can be formed by changing the precipitant mixture contents. Besides, these aggregates were found to be able to carry hydrophobic fluorinated homopolymers, and two suggested processes have been proposed to explain their morphology changes from original spheres, rods and vesicles into larger size spheres. Finally, hollow bilayer spheres and tubules can be achieved after extracting homopolymers in the center of the newly formed spheres. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1000–1006, 2008     

Multicompartment micelles from silicone-based triphilic block copolymers

An amphiphilic linear ternary block copolymer was synthesised in three consecutive steps via reversible addition–fragmentation chain transfer polymerisation. Oligo(ethylene glycol) monomethyl ether acrylate was engaged as a hydrophilic building block, while benzyl acrylate and 3-tris(trimethylsiloxy)silyl propyl acrylate served as hydrophobic building blocks. The resulting “triphilic” copolymer consists thus of a hydrophilic (A) and two mutually incompatible “soft” hydrophobic blocks, namely, a lipophilic (B) and a silicone-based (C) block, with all blocks having glass transition temperatures well below 0 °C. The triphilic copolymer self-assembles into spherical multicompartment micellar aggregates in aqueous solution, where the two hydrophobic blocks undergo local phase separation into various ultrastructures as evidenced by cryogenic transmission electron microscopy. Thus, a silicone-based polymer block can replace the hitherto typically employed fluorocarbon-based hydrophobic blocks in triphilic block copolymers for inducing multicompartmentalisation.     

紫铜表面3-巯丙基三乙氧基硅烷薄膜的制备与耐蚀性能

利用傅里叶变换红外(FTIR)光谱分析了3-巯丙基三乙氧基硅烷分别在酸性和碱性的醇-水溶液中水解后以及在紫铜表面成膜后的结构特征. 利用极化曲线、电化学阻抗谱(EIS)和盐水浸泡实验测试了硅烷膜的耐腐蚀性能. 结果表明: 3-巯丙基三乙氧基硅烷在酸性溶液中能够发生一定程度的水解并生成Si―OH结构, 且当该溶液在自然状态下晾干后, 其水解程度进一步增大. 在碱性溶液中该硅烷只发生少量的水解, 溶液中含有较多SiOCH₂CH₃结构, 且在溶液自然晾干后水解程度也没有明显增大. 由酸性硅烷溶液制得的薄膜中硅烷分子以Si―O―Si 键相互交联的程度比由碱性硅烷溶液制得的薄膜高. 硅烷膜降低了紫铜电极的腐蚀电流密度, 其保护效率分别为90.3%(酸性)和79.2%(碱性). 在3.5% (w) NaCl溶液中浸泡24 h后, 由酸性溶液制得的薄膜表现出更高的阻抗值, 而由碱性溶液制得的薄膜则基本失去了对基底的保护能力.     

玻璃硅烷化处理对罗丹明6G和亚甲基蓝吸附行为的影响

利用六甲基二硅烷胺对平面玻璃光波导(高折射率透明导光薄膜介质)进行硅烷化处理, 得到水接触角大于90°的疏水表面. 然后使用时间分辨光波导分光光谱技术研究水溶液中的罗丹明6G (R6G)和亚甲基蓝(MB)分子在疏水玻璃表面的吸附行为, 并与亲水玻璃条件下测得的结果进行对比. 对利用疏水玻璃光波导测得的R6G的吸附-脱附动力学曲线进行Langmuir拟合得到了R6G的吸附速率常数, 脱附速率常数以及吸附自由能. 并且发现与亲水玻璃情况相比, 吸附速率常数增大, 脱附速率常数减小, 吸附自由能更负. 在疏水玻璃表面形成的R6G和MB吸附层的吸光度与亲水玻璃情况相比显著升高, 表明这两种分子更倾向于吸附在疏水玻璃表面. 实验结果还发现玻璃硅烷化处理能够有效抑制这两种染料分子在表面的聚合反应.     

Preparation and applications of a variety of fluoroalkyl end-capped oligomer/hydroxyapatite composites

A variety of fluoroalkyl end-capped oligomers were applied to the preparation of fluorinated oligomer/hydroxyapatite (HAp) composites (particle size: 38-356 nm), which exhibit a good dispersibility in water and traditional organic solvents. These fluoroalkyl end-capped oligomer/HAp composites were easily prepared by the reactions of disodium hydrogen phosphate and calcium chloride in the presence of self-assembled molecular aggregates formed by fluoroalkyl end-capped oligomers in aqueous solutions. In these fluorinated HAp composites thus obtained, fluoroalkyl end-capped acrylic acid oligomers and 2-methacryloyloxyethanesulfonic acid oligomer/HAp nanocomposites afforded transparent colorless solutions toward water; however, fluoroalkyl end-capped N,N-dimethylacrylamide oligomer and acryloylmorpholine oligomer were found to afford transparent colorless solutions with trace amounts of white-colored HAp precipitants under similar conditions. HAp could be encapsulated more effectively into fluorinated 2-methacryloyloxyethanesulfonic acid oligomeric aggregate cores to afford colloidal stable fluorinated oligomer/HAp composites, compared to that of fluorinated acrylic acid oligomers. These fluorinated oligomer/HAp composites were applied to the surface modification of glass and PVA to exhibit a good oleophobicity imparted by fluorine. HAp formation was newly observed on the modified polyethylene terephthalate film surface treated with fluorinated 2-methacryloyloxyethanesulfonic acid oligomers and acrylic acid oligomer/HAp composites by soaking these films into the simulated body fluid.     

Effect of a low-molecular-weight salt on colloidal dispersions of interpolyelectrolyte complexes

Colloidal dispersions of an interpolyelectrolyte complex were prepared by mixing dilute aqueous solutions of poly(dimethyldiallylammonium chloride) and the sodium salt of the alternating copolymer of maleic acid propene in amounts providing about a threefold excess of the charged groups of the cationic polyelectrolyte over those of the anionic polyelectrolyte. These dispersions were examined by means of analytical sedimentation, quasielastic light scattering, and laser Doppler microelectrophoresis. The experimental results obtained suggest that the particles of the interpolyelectrolyte complex are multicomplex aggregates bearing cationic charge. Such aggregates were assumed to consist of a hydrophobic core formed by coupled oppositely charged macromolecules and a hydrophilic shell formed by cationic macromolecules. Hydrodynamic and electrophoretic properties of these aggregates were found to be rather sensitive to variations in the ionic strength of the surrounding medium: with rising salt concentration, their sedimentation coefficient and hydrodynamic size increase, these increases becoming more strongly pronounced at higher salt concentrations, whereas their electrophoretic mobility gradually decreases. The salt effects revealed suggest that the aggregation level of the particles of the interpolyelectrolyte complex rises in response to an increase in the ionic strength of the surrounding medium. This phenomenon was associated with the salt-induced decrease of the stabilizing effect of the hydrophilic shells that protect such particles from progressive aggregation. Received: 15 May 1998 Accepted in revised form: 28 August 1998     

Lipase-catalyzed reactions at different surfaces

Starting from gold chips, we have tailor-made three surfaces by the self-assembly monolayer technique: one entirely hydrophobic, one hydrophobic with dispersed carboxyl groups, and one hydrophilic, containing hydroxyl groups. Rhizomucor miehei lipase has been adsorbed to the hydrophobic and the hydrophilic surfaces and covalently bound to the surface containing carboxyl groups. The adsorption of two substrates-capric acid (decanoic acid) and monocaprin-on the lipase-covered surfaces was monitored by the surface plasmon resonance (SPR) technique. Biocatalysis was also performed in the SPR instrument by circulating a solution of the substrate, dissolved in an 85:15 water-glycerol mixture at a(w) = 0.81, through the instrument, thus exposing the capric acid or the monocaprin to the lipase-covered surfaces. The product composition was found to depend on the type of surface used. Lipase adsorbed at the hydrophilic surface favored hydrolysis, and capric acid was the main product formed when monocaprin was used as substrate. Lipase adsorbed at a hydrophobic surface and, in particular, lipase covalently bound to a hydrophobic surface favored condensation. More dicaprin than capric acid was formed in experiments with monocaprin as the substrate. Reactions performed outside the SPR instrument showed that small amounts of triglyceride were also formed under these conditions. We believe that this work constitutes the first example of the SPR instrument being used for in-situ biotransformation.     

Novel self-organization of polymer particles on hydrophobic solid surfaces through hydrophobic interaction

A novel technique of particle monolayer fabrication based on hydrophobic interactions in aqueous systems is described in this paper. When alkylated glass plates modified with various silane coupling agents were immersed in aqueous dispersions of submicron-sized polystyrene particles of cationic or anionic surface charges, cationic particle monolayers containing active ester groups were effectively formed at the plate surfaces, whereas no anionic particles were self-organized on the plate surfaces. The coverage of the plates with cationic particles and the morphology of the monolayers varied with the hydrophobicities of the particles and plates as well as with the ionic strength of the medium and temperature. For less hydrophobic methylated glass surfaces modified with methyltriethoxysilane, cationic particles were self-organized at relatively regular intervals, whereas they were self-organized in the form of aggregates for the more hydrophobic octadecylated glass plates treated with n-octadecyltriethoxysilane. Closely packed monolayers were fabricated by adjusting ionic strength and temperature. Fluorescence labelling of cationic particle monolayers was successfully accomplished by the reaction of remaining active ester groups on the monolayers with a fluorescence probe containing amino groups. Cationic particle monolayers were physically stabilized by heating above the glass transition temperature (T _g) of the particles.     

交联聚氨酯水分散体的合成

将硅氧烷封端的含亲水基团的线性聚氨酯预聚体分散于水中 ,获得稳定的聚氨酯分散体 .由于硅氧基团水解、缩合 ,在分散体粒子内产生扩链交联反应 ,生成了交联水基聚氨酯分散体 .透射电子显微镜研究表明分散体粒径小、分布宽 .扫描电子显微镜研究了成膜结构及成膜性能与粒径的关系 .溶胀实验计算获得的两交联点之间的平均分子量与理论平均分子量相符 .研究还发现此分散体膜在干燥过程中可进一步交联 .膜的水溶胀及机械性能表明 ,此分散体具有极大的工业应用价值 .     

Self-assembly and morphology control of new L-glutamic acid-based amphiphilic random copolymers: giant vesicles, vesicles, spheres, and honeycomb film

New amphiphilic random copolymers containing hydrophobic dodecyl (C12) chain and hydrophilic L-glutamic acid were synthesized, and their self-assembly in solution as well as on the solid surfaces was investigated. The self-assembly behavior of these polymers are largely dependent on their hydrophilic and hydrophobic balances. The copolymer with a more hydrophobic alkyl chain (～90%) self-assembled into giant vesicles with a diameter of several micrometers in a mixed solvent of ethanol and water. When the hydrophobic ratio decreased to ca. 76%, the polymer self-assembled into conventional vesicles with several hundred nanometers. The giant vesicles could be fused in certain conditions, while the conventional vesicles were stable. When the content of the hydrophilic part was further increased, no organized structures were formed. On the other hand, when the copolymer solutions were directly cast on solid substrates such as silicon plates, films with organized nanostructures could also be obtained, the morphology of which depended on solvent selection. When ethanol or methanol was used, spheres were obtained. When dichloromethane was used as the solvent, honeycomb-like morphologies were obtained. These results showed that through appropriate molecular design, random copolymer could self-assemble into various organized structures, which could be regulated through the hydrophobic/hydrophilic balance and the solvents.     

Size-dependent self-organization of colloidal particles on chemically patterned surfaces

A study of the self-organization of colloidal particles during the evaporation of particle solutions on chemically patterned surfaces is presented. On a surface with hydrophilic and hydrophobic regions, colloidal particles form compact structures on the hydrophilic sites. When a colloidal solution containing a mixture of particles with a variation in size is used, the number density of each type of particle deposited on the hydrophilic islands after evaporation decreases with increasing particle size. This makes it possible to produce a concentration gradient of the particles on islands of different sizes. It is shown that this technique could allow for particle separation.     

Why does silane enhance the protective properties of epoxy films?

Using neutron reflectivity, the protection mechanisms of a novel one-step epoxy-silane coating system were investigated in terms of coating structure and water response behavior. By comparing pure epoxy and epoxy-silane mixtures in various aqueous environments, the effects of the addition of silane were determined. Specifically, a bridged bis-silane coupling agent with six alkoxy moieties and a polysulfur bridge was investigated. The key mechanisms of silane-enhanced protection are (1) the silane is enriched at the substrate-coating interface, forming a hydrophobic dense interfacial layer and good adhesion to the substrate, and (2) the silane serves as a cross-linker, resulting in a denser and less hydrophilic bulk film compared to the neat epoxy. The hydrophobic nature of bis-sulfur silane also increases the overall hydrophobicity of the mixed film.     

Network formation of catanionic vesicles and oppositely charged polyelectrolytes. Effect of polymer charge density and hydrophobic modification

In nonequimolar solutions of a cationic and an anionic surfactant, vesicles bearing a net charge can be spontaneously formed and apparently exist as thermodynamically stable aggregates. These vesicles can associate strongly with polymers in solution by means of hydrophobic and/or electrostatic interactions. In the current work, we have investigated the rheological and microstructural properties of mixtures of cationic polyelectrolytes and net anionic sodium dodecyl sulfate/didodecyldimethylammonium bromide vesicles. The polyelectrolytes consist of two cationic cellulose derivatives with different charge densities; the lowest charge density polymer contains also hydrophobic grafts, with the number of charges equal to the number of grafts. For both systems, polymer-vesicle association leads to a major increase in viscosity and to gel-like behavior, but the viscosity effects are more pronounced for the less charged, hydrophobically modified polymer. Evaluation of the frequency dependence of the storage and loss moduli for the two systems shows further differences in behavior: while the more long-lived cross-links occur for the more highly charged hydrophilic polymer, the number of cross-links is higher for the hydrophobically modified polymer. Microstructure studies by cryogenic transmission electron microscopy indicate that the two polymers affect the vesicle stability in different ways. With the hydrophobically modified polymer, the aggregates remain largely in the form of globular vesicles and faceted vesicles (polygon-shaped vesicles with largely planar regions). For the hydrophilic polycation, on the other hand, the surfactant aggregate structure is more extensively modified: first, the vesicles change from a globular to a faceted shape; second, there is opening of the bilayers leading to holey vesicles and ultimately to considerable vesicle disruption leading to planar bilayer, disklike aggregates. The faceted shape is tentatively attributed to a crystallization of the surfactant film in the vesicles. It is inferred that a hydrophobically modified polyion with relatively low charge density can better stabilize vesicles due to formation of molecularly mixed aggregates, while a hydrophilic polyion with relatively high charge density associates so strongly to the surfactant films, due to strong electrostatic interactions, that the vesicles are more perturbed and even disrupted.     

Molecular aggregates in aqueous solutions of bile acid salts. Molecular dynamics simulation study

The aggregation behavior of two bile acid salts (i.e., sodium cholate and sodium deoxycholate) has been studied in their aqueous solutions of three different concentrations (i.e., 30, 90,and 300 mM) by means of molecular dynamics computer simulations. To let the systems reach thermodynamic equilibrium, rather long simulations have been performed: the equilibration period, lasting for 20-50 ns, has been followed by a 20 ns long production phase, during which the average size of the bile aggregates (regarded to be the slowest varying observable) has already fluctuated around a constant value. The production phase of the runs has been about an order of magnitude longer than the average lifetime of both the monomeric bile ions and the bonds that link two neighboring bile ions together to be part of the same aggregate. This has allowed the bile ions belonging to various aggregates to be in a dynamic equilibrium with the isolated monomers. The observed aggregation behavior of the studied bile ions has been found to be in good qualitative agreement with experimental findings. The analysis of the results has revealed that, due to their molecular structure, which is markedly different from that of the ordinary aliphatic surfactants, the bile ions form rather different aggregates than the usual spherical micelles. In the lowest concentration solution studied, the bile ions only form small oligomers. In the case of deoxycholate, these oligomers, such as the ordinary micelles, are kept together by hydrophobic interactions, whereas in the sodium cholate system, small hydrogen-bonded aggregates (mostly dimers) are also present. In the highest concentration systems, the bile ions form large secondary micelles, which are kept together both by hydrophobic interactions and by hydrogen bonds. Namely, in these secondary micelles, small hydrophobic primary micelles are linked together via the formation of hydrogen bonds between their hydrophilic outer surfaces.     

Nucleation-elongation polymerization under imbalanced stoichiometry

As a result of the helical structure of the polymeric product, the folding-driven polymerization of oligo(m-phenyleneethynylene) imines in solution should inherently show nucleation-elongation in chain growth. Here, we present evidence for this behavior based on results of polymerizations conducted under conditions of imbalanced stoichiometry. Because the polymerization proceeds via imine metathesis between a pair of bifunctional monomers of types A-A and B-B, the molar ratio of the polymerizing functional groups can be arbitrarily varied. Alternatively, stoichiometry can be controlled by the addition of a monofunctional oligomer. Similar results were obtained in both cases whereby the molecular weight distribution was significantly different from that expected for classical step-growth polymerizations. At equilibrium, high molecular weight polymers were observed to coexist with the monomer in excess. Thermodynamic equilibrium was established by showing that the same distribution was reached starting either from a monomer mixture or from high polymers to which one monomer was added. These results are in great contrast to the low molecular weight oligomers that were produced when the reaction was conducted by melt condensation of bifunctional aldehyde and amine monomers, a polymerization that apparently proceeds without the nucleation event. An equilibrium model that captures the features of nucleation-elongation under conditions of imbalanced stoichiometry qualitatively supports the monomer-polymer distribution observed experimentally.     

Solution behavior of aqueous mixtures of low and high molecular weight hydrophobic amphiphiles

Mixtures of a hydrophobic triblock copolymer (L121, PEO₅PPO₆₈PEO₅) and a hydrophobic anionic surfactant (AOT, Sodium bis(2-ethylhexyl)sulfosuccinate), each alone forming turbid vesicular solutions in water, aggregate to produce a thermodynamically stable, transparent, and isotropic solution. Mixed AOT/L121 aggregates could be confirmed by fluorescence, surface tension, differential scanning calorimetry (DSC), and isothermal titration calorimetry. In an isotropic region, where mixed aggregates are formed, there is a synergistic interaction between monomers of AOT and L121 in the mixture. In addition, small-angle neutron scattering experiments provided evidence that mixed aggregates have the shape of either spheres (with a certain polydispersity) or very short ellipsoids (axial ratio below 2), confirming a transition from giant multilamellar vesicles to small aggregates upon mixing the two hydrophobic amphiphiles. Upon dilution, the morphology changes to disk-like. From an examination of the results of all the methods the peculiar behavior of the mixed AOT/L121 system is explained.     

Thermally cleavable surfactants based on furan-maleimide Diels-Alder adducts

Two new surfactant molecules are reported that contain thermally labile Diels-Alder adducts connecting the hydrophilic and hydrophobic sections of each molecule. The two surfactants possess identical hydrophobic dodecyl tail segments but have phenol and carboxylic acid hydrophilic headgroups, respectively. Deprotonation with potassium hydroxide affords the formation of water-soluble surfactants. Room temperature aqueous solutions of both surfactants exhibit classical surface-active agent behavior similar to common analagous alkylaryl surfactant molecules. Critical micelle concentrations have been determined for each surfactant through dynamic surface tension and dye solubilization techniques. Small-angle neutron scattering measurements of the aqueous surfactant solutions indicate the presence of spherical micelles with radii of 16.5 angstroms for the carboxylate and 18.8 angstroms for the phenolate. When these surfactants are exposed to elevated temperatures (>50 degrees C), the retro Diels-Alder reaction occurs, yielding hydrophilic and hydrophobic fragments. Aqueous solutions of each surfactant subsequently exhibit a loss of all surface-active behavior and the micellar aggregates are no longer detectable.     

Two-dimensional Monte Carlo simulations of ionic and nonionic silane self-assembly on hydrophilic surfaces

Aqueous chemistries have recently been shown to be useful for the deposition of hydrophobic films of nonionic and cationic silanes on hydrophilic substrates for the prevention of stiction in MEMS. The Monte Carlo method is used to simulate in two dimensions the self-assembly of silane films on a hydrophilic surface. We investigate the impact of charged group in cationic silane on the overall structure of the films. We characterize the film structure with spatial pair correlations at each molecular layer of the deposited films. The simulations reveal long-range correlations for the film of cationic silanes. Based on our two-dimensional simulations, we report an average "most probable" structure for the films of nonionic and cationic silanes.