Rupturing polymeric micelles with cyclodextrins

Small-angle neutron scattering has been used to investigate the associative structures formed by triblock copolymers of poly(ethylene oxide) (PEO)-polypropylene oxide (PPO)-poly(ethylene oxide) (PEO) (also known as Pluronics) and to monitor the structural changes occurring upon complexation with heptakis(2,6-di-O-methyl)-beta-cyclodextrin (hbeta-CD) over the temperature range from 5 to 70 degrees C. At low temperature, the Pluronics are dispersed as unimers. Close to ambient temperature, the hydrophobicity of PPO causes the aggregation of the polymers into spherical micelles with core sizes between 40 and 50 A and a high inclusion of solvent. The aggregation number increases with temperature as the hydrophobicity of the core is gradually enhanced. hbeta-CD spontaneously forms pseudopolyrotaxanes with the triblock copolymers either when in their unimer form or micellized. The complexation results in an increase in the effective critical micellar concentration. It is suggested that the cyclodextrins thread onto the polymer backbone to localize preferentially on the central PPO block, therefore improving its water solubility. At temperatures where the polymers exist in micellar form, complexation with hbeta-CD gives rise to a complete disruption of the aggregates. These processes are highly temperature-dependent. Above 50 degrees C, the break-up of the aggregates is inhibited, and large-scale aggregation is observed.     

Supramolecular polymers formed by cinnamoyl cyclodextrins

6-Cinnamoyl α-cyclodextrin (6-CiO-α-CD) and 6-cinnamoyl β-cyclodextrin (6-CiO-β-CD) were prepared. 6-CiO-α-CD formed intermolecular complexes to give supramolecular oligomers. 6-CiO-β-CD formed insoluble supramolecular complexes in the solid state. The structures of these complexes are discussed. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3519–3523, 2003     

Structural characterization of frozen n-heptane solutions of metal-containing reverse micelles

The microstructure of temperature-quenched solutions of reverse micelles formed by sodium, cobalt, ytterbium, and cobalt/ytterbium bis(2-ethylhexyl)sulfosuccinate in n-heptane has been investigated by SAXS and EXAFS. Some changes in the X-ray absorption spectra with respect to the same systems at room temperature have been observed. The analysis of the SAXS spectra leads to the hypothesis that at 77 K the closed spherical structure of reverse micelles is retained and that during the temperature quench they undergo a clustering process involving the transition from a quite random dispersion to the formation of more or less large clusters of strongly packed reverse micelles. This behavior is attributed to competitive effects caused by the temperature decrease. The prevalence of intermicellar attractive interactions with respect to Brownian motions leading to a collapse to more compact structure is in competition with the rapid decrease of reverse micelle diffusion rate involving a freezing of the local structures. In the case of cobalt, ytterbium, and cobalt/ytterbium bis(2-ethylhexyl)sulfosuccinate reverse micelles, further information from EXAFS measurements indicates that within the reverse micelle core exists a quite ordered nanosized domain composed of water, surfactant counterions, and oxygen atoms of the SO3- head groups. The conservation of local order and inverse structure during the clustering phenomenon that results from the fast freezing with liquid nitrogen of solutions of reverse micelles could have biological implications, i.e., the preservation of tissue samples at cryogenic temperatures.     

Structural characterization of the new polymorphic mesophases formed by bent-core molecules

A new achiral banana-shaped five-ring 2-methylresorcinol derivative fluorinated on the outer rings has been synthesized. This compound exhibits four antiferroelectric smectic phases characteristic for bent-core molecules (B 2 , B' 2 , B' 2 , B 5 ). In addition, a highly viscous solid-like phase has been detected which also shows electro-optical switching. This is the first switchable highly ordered B phase. The characterization of the mesophases was made by X-ray diffraction, electro-optical measurements and dielectric spectroscopy.     

Polymerized surface micelles formed under mild conditions

A new polymerizable surfactant 1-[11-(lipoyloxy)-undecyl]-pyridinium bromide was synthesized, which provides a new approach for polymerizing micelles under mild conditions.     

Morphologies of multicompartment micelles formed by triblock copolymers

Multicompartment micelles are desirable for advanced applications such as drug delivery. Recently, core-shell-corona (CSC) and segmented-worm (SW) micelles formed by ABC triblock terpolymers with three mutually immiscible blocks are observed in experiments. We have performed dissipative particle dynamics simulations to study the effects of molecular architecture, block length, and solution concentration on the morphologies of ABC triblock terpolymers. The formation of CSC and SW micelles for linear and miktoarm star ABC terpolymers is confirmed in this work. In addition, we predict that different multicompartment micellar morphologies (e.g., incomplete skin-layered micelles and segmented worms) can be formed by linear copolymer with different arrangements of the three blocks.     

Polymeric micelles formed by splitting of micellar cluster

Polystyrene-b-poly(acrylic acid) (PS-b-PAA) diblock copolymer chains form aggregates with bimodal distribution in toluene. The introduction of polystyrene-b-poly(ethylene oxide) (PS-b-PEO) chains leads to the formation of mixed micellar cluster due to the hydrogen-bonding complexation between PAA and PEO. By using laser light scattering and transmission electron microscopy, we have investigated the structural evolution of the mixed micellar cluster. As the standing time increases, the cluster split into regular complex micelles composed of PS-b-PAA and PS-b-PEO chains. Our results reveal that the hydrogen-bonding complexation between PAA and PEO in the core and the repulsion between PS chains in the corona as a function of the molar ratio (r) of PEO to PAA manipulate the evolution.     

Visible light-responsive micelles formed from dialkoxyanthracene-containing block copolymers

A class of dialkoxyanthracene-containing diblock copolymers is synthesized which possesses visible light-responsivity. These copolymers can self-assemble into a micellar structure in water. Green visible light (540 nm) is able to scissor these anthracene species and cleave the diblock copolymer into two fragments, inducing disassembly of the self-assembled micelles.     

Multistimuli responsive micelles formed by a tetrathiafulvalene-functionalized amphiphile

An electroactive tetrathiafulvalene (TTF)-functionalized amphiphile 1 was designed and synthesized to investigate its self-assembling behavior in water. Dynamic light scattering (DLS), (1)H NMR, fluorescence spectrum, and cryogenic transmission electron microscopy (cryo-TEM) studies revealed that amphiphile 1 can form micelle-like aggregates via direct dissolution into water, and the micellar architectures could be disrupted either by addition of chemical oxidant Fe(ClO(4))(3) or by complexation with electron-deficient cyclobis(paraquat-p-phenylene) tetracation cyclophane (CBPQT(4+)) to release encapsulated hydrophobic dye Nile Red from the interior of micelles.     

Morphologies of multicompartment micelles formed by ABC miktoarm star terpolymers

Several new multicompartment micellar structures have been identified by cryogenic transmission electron microscopy (cryoTEM) from the aqueous self-assembly of mu-[poly(ethylethylene)][poly(ethylene oxide)][poly(perfluoropropylene oxide)] (mu-EOF) miktoarm star terpolymers. This work extends our previous studies, in which it was found that, upon decreasing the length of the hydrophilic block (O), the resulting micelles evolved from "hamburger" micelles to segmented worms and ultimately to nanostructured bilayers and vesicles. In the terpolymers examined here segmented ribbons and bilayers were found at an intermediate composition between segmented worms and nanostructured bilayers, provided that the fluoropolymer (F) was the minority component in the micelle core. On the other hand, when the F block exceeded the chain length of the hydrocarbon block (E), the superhydrophobic F block imposed a "double frustration" on the self-assembly of the mu-EOF(2-9-5) terpolymer; while F prefers to minimize its interfacial contact with the O corona, it must occupy the majority of the micellar core. Therefore, a richer variety of multicompartment micelles, including well-defined segmented worms, raspberry-like micelles, and multicompartmentalized worms, were formed from one terpolymer, as revealed by cryoTEM. Despite the complexity and variety of the observed aggregate morphologies, a small number of common structural elements can be invoked to interpret the observed micelles and to relate a given structure to the terpolymer composition.     

Structural characterization of thin films formed or changed on materials by micro Raman spectroscopy

Micro Raman spectroscopy is shown as a useful method of high spatial resolution in characterization of thin films on or in materials formed or changed as a result of external influences. Identification of black films in the glaze of porcelain, of impairing deposits on components of an ICP mass spectrometer and of tribologically stressed contacts of ADLC films or (Ti,Mo)(C,N) ceramics, respectively, are examples for application.     

Structure of mixed micelles formed in PEG-lipid/lipid dispersions

Polyethylene glycol (PEG)-conjugated lipids are commonly employed for steric stabilization of liposomes. When added in high concentrations PEG-lipids induce formation of mixed micelles, and depending on the lipid composition of the sample, these may adapt either a discoidal or a long threadlike shape. The factors governing the type of micellar aggregate formed have so far not been investigated in detail. In this study we have systematically varied the lipid composition in lipid/PEG-lipid mixtures and characterized the aggregate structure by means of cryo-transmission electron microscopy (cryo-TEM). The effects caused by adding sterols, phosphatidylethanolamines, and phospholipids with saturated acyl chains to egg phosphatidylcholine/1,2-distearoyl-sn-glycero-3-phosphatidylethanolamine-N-[methoxy(polyethylene glycol)-2000 (EPC/DSPE-PEG2000) mixtures with a fixed amount (25 mol %) of DSPE-PEG2000 was studied. Further, the aggregate structure in 1,2-dimyristoyl-sn-glycero-3-phosphatidylcholine/1,2-dimyristoyl-sn-glycero-3-phosphatidylethanolamine-N-[methoxy(polyethylene glycol)-2000] (DMPC/DMPE-PEG2000) samples above and below the gel to liquid crystalline phase transition temperature (TC) was investigated. Our results revealed that lipid components, as well as environmental conditions, that reduce the lipid spontaneous curvature and increase the monolayer bending modulus tend to promote formation of discoidal micelles. At temperatures below the gel-to-liquid crystalline phase transition temperature reduced lipid/PEG-lipid miscibility, furthermore, likely contribute to the observed formation of discoidal rather than threadlike micelles.     

Strain-stiffening response in transient networks formed by reverse wormlike micelles

Strain-stiffening, that is, an increase in material stiffness at large deformations, is a property of many biological materials. Currently, model systems for the study of this phenomenon are elastic networks (gels) of semiflexible filamentous biopolymers such as actin, keratin, or fibrin. Here, we demonstrate strain-stiffening in a class of viscoelastic solutions, comprising reverse wormlike micelles. These structures are formed by the coassembly of the physiological surfactants, lecithin and bile salt, in an organic solvent, cyclohexane. In contrast to the biopolymer gels, the networks here are transient and are formed by the physical entanglement of relatively flexible worms. Our results suggest that neither a permanent network nor a high filament rigidity is required for strain-stiffening. We suggest a different origin, based on a temporary strain-induced increase in the volume fraction of entangled worms. Our system can also serve as a convenient synthetic model for future studies into this phenomenon.     

Synthesis,characterization of novel rotaxanes depend on cyclodextrins

We have developed a colorimetric chemosensor for the selective and sensitive detection of Cys based on the complex (CA-2Pb²⁺) between a commercially available natural organic dye, carminic acid (CA) and Pb²⁺ in pure aqueous solution at physiological pH. The addition of Cys to the CA-2Pb²⁺ solution resulted in a distinct color change from purple to red together with a remarkable absorption spectral change by the restoration of CA through a displacement mechanism with formation of the Cys-Pb²⁺ complex, whereas other amino acids and glutathione induce no or minimal spectral and color changes. Moreover, the other amino acids and GSH do not affect the detection ability of CA-2Pb²⁺ for Cys. The reversibility even through several cycles was established for practical applications. The results indicate that CA-2Pb²⁺ may be useful as a potential colorimetric and naked-eye chemosensor for Cys over Hcy and GSH in aqueous solution.     

Synthesis and characterization of cross-linked reverse micelles

The design and synthesis of a new cross-linkable amphiphile is reported. Solutions of the amphiphile in a toluene/water mixture form reverse micelles as indicated by dynamic light scattering and NMR spectroscopy. As indicated by dynamic light scattering, TEM, and NMR spectroscopy data, these reverse micelles can be cross-linked without drastically changing the radius of the reverse micelles. Mixed reverse micelles are also characterized and cross-linked. The cross-linked reverse micelles are demonstrated to facilitate phase transfer and can be used to site isolate a catalyst.     

Physicochemical characterization of degradable thermosensitive polymeric micelles

Amphiphilic AB block copolymers consisting of thermosensitive poly(N-(2-hydroxypropyl) methacrylamide lactate) and poly(ethylene glycol), pHPMAmDL-b-PEG, were synthesized via a macroinitiator route. Dynamic light scattering measurements showed that these block copolymers form polymeric micelles in water with a size of around 50 nm by heating of an aqueous polymer solution from below to above the critical micelle temperature (cmt). The critical micelle concentration as well as the cmt decreased with increasing pHPMAmDL block lengths, which can be attributed to the greater hydrophobicity of the thermosensitive block with increasing molecular weight. Cryogenic transmission electron microscopy analysis revealed that the micelles have a spherical shape with a narrow size distribution. 1H NMR measurements in D2O showed that the intensity of the peaks of the protons from the pHPMAmDL block significantly decreased above the cmt, indicating that the thermosensitive blocks indeed form the solidlike core of the micelles. Static light scattering measurements demonstrated that pHPMAmDL-b-PEG micelles with relatively large pHPMAmDL blocks possess a highly packed core that is stabilized by a dense layer of swollen PEG chains. FT-IR analysis indicated that dehydration of amide bonds in the pHPMAmDL block occurs when the polymer dissolved in water is heated from below to above its cmt. The micelles were stable when an aqueous solution of micelles was incubated at 37 degrees C and at pH 5.0, where the hydrolysis rate of lactate side groups is minimized. On the other hand, at pH 9.0, where hydrolysis of the lactic acid side groups occurs, the micelles started to swell after 1.5 h of incubation and complete dissolution of micelles was observed after 4 h as a result of hydrophilization of the thermosensitive block. Fluorescence spectroscopy measurements with pyrene loaded in the hydrophobic core of the micelles showed that when these micelles were incubated at pH 8.6 and at 37 degrees C the microenvironment of pyrene became increasingly hydrated in time during this swelling phase. The results demonstrate the potential applicability of pHPMAmDL-b-PEG block copolymer micelles for the controlled delivery of hydrophobic drugs.