Influence of alpha-hydroxylation of glycolipids on domain formation in lipid monolayers

By means of fluorescence and scanning force microscopy (SFM), we investigated the phase behavior of lipid monolayers composed of a mixture of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine, sphingomyelin, and cholesterol (5/2/3) with either alpha-hydroxylated or nonhydroxylated galactocerebroside. Fluorescence images of lipid monolayers at the air-water interface demonstrate that, independent of the lipid mixture, phase separation occurs at low surface pressure up to 4-6 mN m(-1), while an almost homogeneous phase is observed at larger surface pressures. However, by means of SFM of lipid monolayers transferred by the Langmuir-Blodgett technique at around 30 mN m(-1), nanometer-sized domains became discernible in those lipid mixtures that contained galactocerebroside, while, in that without a glycolipid, no such domain formation was visible. Moreover, the alpha-hydroxy group of the galactocerebroside alters the size and the total area of the domains significantly.     

Interactions of Triton X-100 with sphingomyelin and phosphatidylcholine monolayers: influence of the cholesterol content

The presence of microdomains, called lipid rafts, in biological membranes is usually explained by lateral segregation between specific lipids and proteins. These rafts present similarities with the membrane domains isolated by their non-ionic detergent-resistance at 4 degrees C. They are enriched in sphingomyelin and cholesterol as compared with the outer leaflet of eukaryotic cell membranes. To understand the role played by the lipids enriched in rafts in their resistance to solubilization by detergents, the interactions between these lipids and the non-ionic detergent Triton X-100 were studied by using different lipid monolayers at the air-water interface. The influence of Triton X-100 on the Langmuir isotherms (i.e. surface pressure/area isotherms) of monolayers containing sphingomyelin and cholesterol at different mole ratios was analyzed and the results were compared with the influence of Triton X-100 on monolayers containing a phosphatidylcholine bearing a saturated and an unsaturated fatty acid (i.e. palmitoyloleylphosphatidylcholine) and cholesterol. This phosphatidylcholine was chosen since the phosphatidylcholines present in rafts isolated from bovine kidney could contain about 50% of saturated fatty acids. Triton X-100 induces an increase in the condensing effect observed as compared with ideal mixture of phospholipid/cholesterol. Triton X-100-induced changes in the morphology of the monolayers were visualized by Brewster angle microscopy, which confirmed the differences of behavior observed by analyzing the isotherms.     

Chemical mapping of ceramide distribution in sphingomyelin-rich domains in monolayers

The incorporation of ceramide in phase-separated monolayers of ternary lipid mixtures has been studied by a combination of atomic force microscopy (AFM), fluorescence, and time-of-flight secondary ion mass spectrometry (ToF-SIMS). Replacement of a fraction of the sphingomyelin by ceramide in DOPC/SM/cholesterol monolayers leads to changes in the SM-cholesterol-rich liquid-ordered domains. AFM shows the formation of heterogeneous domains with small raised islands that are assigned to a ceramide-rich gel phase. ToF-SIMS provides conclusive evidence for the localization of SM and ceramide in ordered domains and shows that ceramide is heterogeneously distributed in small islands throughout the domains. The results indicate the utility of combining AFM and ToF-SIMS for understanding compositions of phase-separated membranes.     

Designing a Useful Lipid Raft Model Membrane for Electrochemical and Surface Analytical Studies

A model biomimetic system for the study of protein reconstitution or drug interactions should include lipid rafts in the mixed lipid monolayer, since they are usually the domains embedding membrane proteins and peptides. Four model lipid films composed of three components: 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), cholesterol (Chol) and sphingomyelin (SM) mixed in different molar ratios were proposed and investigated using surface pressure measurements and thermodynamic analysis of the monolayers at the air–water interface and imaged by Brewster angle microscopy. The ternary monolayers were transferred from the air–water onto the gold electrodes to form bilayer films and were studied for the first time by electrochemical methods: alternative current voltammetry and electrochemical impedance spectroscopy and imaged by atomic force microscopy. In excess of DOPC, the ternary systems remained too liquid for the raft region to be stable, while in the excess of cholesterol the layers were too solid. The layers with SM in excess lead to the formation of Chol:SM complexes but the amount of the fluid matrix was very low. The equimolar content of the three components lead to the formation of a stable and well-organized assembly with well-developed raft microdomains of larger thickness, surrounded by the more fluid part of the bilayer. The latter is proposed as a convenient raft model membrane for further physicochemical studies of interactions with drugs or pollutants or incorporation of membrane proteins.     

A combined vibrational sum frequency generation spectroscopy and atomic force microscopy study of sphingomyelin-cholesterol monolayers

A combination of vibrational sum frequency generation spectroscopy and atomic force microscopy is used to study the changes in morphology and conformational order in monolayers prepared from three natural sphingomyelin (SM) mixtures as a function of surface pressure and cholesterol concentration. The most homogeneous SM gave monolayers with well-ordered acyl chains and few gauche defects with relatively small effects of either increasing surface pressure or cholesterol addition. Heterogeneous SM mixtures with a mixture of acyl chain lengths or with significant fractions of unsaturated acyl chains had much larger contributions from gauche defects at low surface pressure and gave increasingly well-ordered monolayers as the surface pressure increased. They also showed substantial increases in lipid chain order after cholesterol addition. Overall, these results are consistent with the strong hydrogen bonding capacity of SM leading to well-ordered monolayers over a range of surface pressures. The changes in acyl chain order for natural SMs as a function of cholesterol are relevant to formation of sphingolipid-cholesterol enriched domains in cell membranes.     

Study of adsorption and penetration of E2(279-298) peptide into Langmuir phospholipid monolayers

The peptide corresponding to the sequence (279-298) of the Hepatitis G virus (HGV/GBV-C) E2 protein was synthesized, and surface activity measurements, pi-A compression isotherms, and penetration of E2(279-298) into phospholipid monolayers spread at the air-water interface were carried out on water and phosphate buffer subphases. The results obtained indicated that the pure E2(279-298) Langmuir monolayer exhibited a looser packing on saline-buffered than on pure water subphase and suggest that the increase in subphase ionic strength stabilizes the peptide monolayer. To better understand the topography of the monolayer, Brewster angle microscopy (BAM) images of pure peptide monolayers were obtained. Penetration of the peptide into the pure lipid monolayers of dipalmitoylphosphatidylcholine (DPPC) and dimyristoylphosphatidylcholine (DMPC) and into mixtures of dimyristoylphosphatidylcholine/dimyristoylphosphatidylglycerol (DMPC/DMPG) at various initial surface pressures was investigated to determine the ability of these lipid monolayers to host the peptide. The higher penetration of peptide into phospholipids is attained when the monolayers are in the liquid expanded state, and the greater interaction is observed with DMPC. Furthermore, the penetration of the peptide dissolved in the subphase into these various lipid monolayers was investigated to understand the interactions between the peptide and the lipid at the air-water interface. The results obtained showed that the lipid acyl chain length is an important parameter to be taken into consideration in the study of peptide-lipid interactions.     

Evaluation of the interactions between lipids and γ-globulin protein at the air–liquid interface

The interactions between lipids (cholesterol, distearoylphosphatidylcholine, distearoylphosphatidylethanolamine and sphingomyelin) and the γ-globulin protein have been analyzed using the monolayer technique at the air–liquid interface. The analysis has been carried out using both state equations and an adequate thermodynamic formulation for the surface pressure (π)–molecular area (a) isotherms. Different parameters as the virial coefficients, have been estimated. For the uncharged lipid monolayers, the interactions between the molecules are of an attractive nature, at medium and long distance, and of a steric repulsive nature at short distance. At low surface pressures the lipid molecules form small domains. The net force between γ-Globulin molecules in the monolayers has been found to be attractive. Finally, it can be concluded that when the lipid monolayers are uncharged, there is practically no interaction between the protein and lipid molecules at the mentioned interface.     

Aggregation of a peptide antibiotic alamethicin at the air-water interface and its influence on the viscoelasticity of phospholipid monolayers

The aggregation properties of an antibiotic membrane-active peptide alamethicin at the air-water interface have been studied using interfacial rheology and fluorescence microscopy techniques. Fluorescence microscopy of alamethicin monolayers revealed a coexistence of liquid expanded (LE) and solid phases at the surface concentrations studied. Interfacial oscillatory shear measurements on alamethicin monolayers indicate that its viscoelastic properties are determined by the area fraction of the solid domains. The role of zwitterionic phospholipids dioleoylphosphatidyl choline (DOPC) and dioleoylphosphatidyl ethanolamine (DOPE) on the peptide aggregation behavior was also investigated. Fluorescence microscopy of alamethicin/phospholipid monolayers revealed an intermediate phase (I) in addition to the solid and LE phase. In mixed monolayers of phospholipid (L)/alamethicin (P), with increase in L/P, the monolayer transforms from a viscoelastic to a viscous fluid with the increase in area fraction of the intermediate phase. Further, a homogeneous mixing of alamethicin/lipid molecules is observed at L/P > 4. Our studies also confirm that the viscoelasticity of alamethicin/phospholipid monolayers is closely related to the alamethicin/phospholipid interactions at the air-water interface.     

Incorporation of Blood-Clotting Proteins into Phospholipid Langmuir Monolayers: A Fluorescence Microscopy Study

Phospholipid monolayers adsorbed at an air-water interface are model cell membranes and have been used in this work to study interactions with blood-clotting proteins. Factor I (non-membrane binding) was used as a control protein, and its association with L-alpha-dipalmitoylphosphatidylcholine Langmuir monolayers was compared to factor VII, a membrane-binding protein. Fluorescence micrographs indicated that factor I penetration of the lipid monolayers in the phase transition region occurred extensively, causing condensation of the lipid film. The association of factor I with phospholipid monolayers was deemed nonspecific. Factor VII was shown to associate with the periphery of lipid domains in the absence of calcium ions, causing flattening of domain edges. In the presence of calcium, factor VII induced expansion of the lipid monolayer. This effect is a specific interaction attributed to exposure of hydrophobic residues upon calcium binding, followed by protein association with lipid hydrocarbon chains. Copyright 2001 Academic Press.     

Creating and Modulating Microdomains in Pore‐Spanning Membranes

The architecture of the plasma membrane is not only determined by the lipid and protein composition, but is also influenced by its attachment to the underlying cytoskeleton. Herein, we show that microscopic phase separation of “raft‐like” lipid mixtures in pore‐spanning bilayers is strongly determined by the underlying highly ordered porous substrate. In detail, lipid membranes composed of DOPC/sphingomyelin/cholesterol/Gb₃ were prepared on ordered pore arrays in silicon with pore diameters of 0.8, 1.2 and 2 μm, respectively, by spreading and fusion of giant unilamellar vesicles. The upper part of the silicon substrate was first coated with gold and then functionalized with a thiol‐bearing cholesterol derivative rendering the surface hydrophobic, which is prerequisite for membrane formation. Confocal laser scanning fluorescence microscopy was used to investigate the phase behavior of the obtained pore‐spanning membranes. Coexisting liquid‐ordered‐ (l_o) and liquid‐disordered (l_d) domains were visualized for DOPC/sphingomyelin/cholesterol/Gb₃ (40:35:20:5) membranes. The size of the l_o‐phase domains was strongly affected by the underlying pore size of the silicon substrate and could be controlled by temperature, and the cholesterol content in the membrane, which was modulated by the addition of methyl‐β‐cyclodextrin. Binding of Shiga toxin B‐pentamers to the Gb₃‐doped membranes increased the l_o‐phase considerably and even induced l_o‐phase domains in non‐phase separated bilayers composed of DOPC/sphingomyelin/cholesterol/Gb₃ (65:10:20:5).     

Energetics of cholesterol transfer between lipid bilayers

It is believed that natural biological membranes contain domains of lipid ordered phase enriched in cholesterol and sphingomyelin. Although the existence of these domains, called lipid rafts, is still not firmly established for natural membranes, direct microscopic observations and phase diagrams obtained from the study of three-component mixtures containing saturated phospholipids, unsaturated phospholipids, and cholesterol demonstrate the existence of lipid rafts in synthetic membranes. The presence of the domains or rafts in these membranes is often ascribed to the preferential interactions between cholesterol and saturated phospholipids, for example, between cholesterol and sphingomyelin. In this work, we calculate, using molecular dynamics computer simulation technique, the free energy of cholesterol transfer from the bilayer containing unsaturated phosphatidylcholine lipid molecules to the bilayer containing sphingomyelin molecules and find that the affinity of cholesterol to sphingomyelin is higher. Our calculations of the free-energy components, energy and entropy, show that cholesterol transfer is exothermic and promoted by the favorable change in the lipid-lipid interactions near cholesterol and not by the favorable energy of cholesterol-sphingomyelin interaction, as assumed previously.     

Nanoscale properties of mixed fengycin/ceramide monolayers explored using atomic force microscopy

To gain insight into the interactions between fengycin and skin membrane lipids, mixed fengycin/ceramide monolayers were investigated using atomic force microscopy (AFM) (monolayers supported on mica) and surface pressure-area isotherms (monolayers at the air-water interface). AFM topographic images revealed phase separation in mixed monolayers prepared at 20 degrees C/pH 2 and composed of 0.25 and 0.5 fengycin molar ratios, in the form of two-dimensional (2-D) hexagonal crystalline domains of ceramide surrounded by a fengycin-enriched fluid phase. Surface pressure-area isotherms as well as friction and adhesion AFM images confirmed that the two phases had different molecular orientations: while ceramide formed a highly ordered phase with crystalline chain packing, fengycin exhibited a disordered fluid phase with the peptide ring lying horizontally on the substrate. Increasing the temperature and pH to values corresponding to the skin parameters, i.e., 37 degrees C/pH 5, was found to dramatically affect the film organization. At low fengycin molar ratio (0.25), the hexagonal ceramide domains transformed into round domains, while at higher ratio (0.5) these were shown to melt into a continuous fengycin/ceramide fluid phase. These observations were directly supported by the thermodynamic analysis (deviation from the additivity rule, excess of free energy) of the monolayer properties at the air-water interface. Accordingly, this study demonstrates that both the environmental conditions (temperature, pH) and fengycin concentration influence the molecular organization of mixed fengycin/ceramide monolayers. We believe that the ability to modulate the formation of 2-D domains in the skin membrane may be an important biological function of fengycin, which should be increasingly investigated in future pharmacological research.     

Protein-directed assembly of binary monolayers at the interface and surface patterns of protein on the monolayers

Ferritin-directed assembly of binary monolayers of zwitterionic dipalmitoylphosphatidylcholine and cationic dioctadecyldimethylammonium bromide (DOMA) at the interface and surface patterns of ferritin on the monolayers have been investigated using a combination of infrared reflection absorption spectroscopy, surface plasmon resonance, and atomic force microscopy. Ferritin binding to the binary monolayers at the air-water interface at the surface pressure 30 mN/m, primarily driven by the electrostatic interaction, gives rise to a change in tilt angle of hydrocarbon chains from 15 degrees +/- 1 degrees to 10 degrees +/- 1 degrees with respect to the normal of the monolayer at the mole fraction of DOMA (XDOMA) of 0.1. The chains at XDOMA = 0.3 are oriented vertical to the water surface before and after protein binding. A new mechanism for protein binding to the binary monolayers is proposed. The secondary structures of the adsorbed ferritin are prevented from changing to some extent due to the existence of the monolayers. The amounts of the bound protein on the monolayers at the air-water interface are increased in comparison with those on the pre-immobilized monolayers at low XDOMA. The increased amounts and different patterns of the adsorbed protein at the monolayers are mostly attributed to the formation of multiple binding sites available for ferritin, which is due to the lateral reorganization of the lipid components in the monolayers induced by the protein in the subphase. The created multiple binding sites on the monolayer surfaces through the protein-directed assembly can be preserved for subsequent protein binding.     

Amino-substituted amphiphilic calixarenes: self-assembly and interactions with DNA

The amphiphilic 5,11,17,23-tetramino-25,26,27,28-tetradodecyloxycalix[4]arene is shown to self-assemble as stable and well-defined Langmuir monolayers at the air-water interface. The effect of the presence of DNA in the subphase reveals interactions taking place at the interface between the positively charged surface and the negatively charged DNA, causing an expansion of the monolayers and a phase transition from a liquid-condensed to a liquid-expanded phase; a slight decrease in the stability of the monolayers is also observed. The title compound is shown to self-assemble, with the absence of a cosurfactant, as stable colloidal suspensions. Photon correlation spectroscopy, zeta-potential measurements, and atomic force microscopy reveal that these colloidal suspensions present a monodisperse size distribution and are composed of positively charged solid lipid nanoparticles (SLNs), with an average hydrodynamic diameter of 190 nm and a surface potential of +13.2 mV. The interaction of these SLNs with double-stranded DNA is demonstrated.     

Phase-separation of mixed surfactant monolayers: a comparison of film morphology at the solid-air and liquid-air interfaces

The morphologies of phase-separated monolayer films prepared from two different binary mixtures of perfluorocarbons and hydrocarbons have been examined and compared, for the first time, at the solid-air and liquid-air interfaces. Films were comprised of binary mixtures of arachidic acid (C(19)H(39)COOH) with perfluorotetradecanoic acid (C(13)F(27)COOH) and of palmitic acid (C(15)H(31)COOH) with perfluorooctadecanoic acid (C(17)F(35)COOH). For both mixed systems, Langmuir Blodgett films on mica substrates consisted of polygonal domains of one surfactant dispersed in a continuous matrix of the other (arachidic acid in perfluorotetradecanoic acid or perfluorooctadecanoic acid in palmitic acid, respectively), consistent with previous reports. Real-time imaging of the air-water interface via Brewster angle microscopy revealed that comparable film morphology was present at the air-water interface and the solid-air interface over a wide range of surface pressures, and that for the arachidic acid-based mixture, domain growth dynamics at the air-water interface is consistent with that inferred from sequential "static" atomic force microscope images collected at the solid-air interface.     

Thermodynamic and real-space structural evidence of a 2D critical point in phospholipid monolayers

The two-dimensional phase diagram of phospholipid monolayers at air-water interfaces has been constructed from Langmuir compression isotherms. The coexistence region between the solid and fluid phases of the monolayer ends at the critical temperature of the transition. The small-scale lateral structure of the monolayers has been imaged by atomic force microscopy in the nm to microm range at distinct points in the phase diagram. The lateral structure is immobilized by transferring the monolayer from an air-water interface to a solid mica support using Langmuir-Blodgett techniques. A transfer protocol that ensures preservation of the structure during the transfer has been established. The lateral structure reflecting the density fluctuations has been visualized and quantitatively characterized as the monolayer passes through a series of first-order phase transitions and ultimately approaches a critical point. The critical behavior inferred from the thermodynamic as well as the structural data is found to be consistent with the 2D Ising universality class. Additional results are presented demonstrating the presence of striped phases and coexisting domains in binary mixtures.     

Two-dimensional ordered beta-sheet lipopeptide monolayers

A series of amphiphilic lipopeptides, ALPs, consisting of an alternating hydrophilic and hydrophobic amino acid residue sequence coupled to a phospholipid tail, was designed to form supramolecular assemblies composed of beta-sheet monolayers decorated by lipid tails at the air-water interface. A straightforward synthetic approach based on solid-phase synthesis, followed by an efficient purification protocol was used to prepare the lipid-peptide conjugates. Structural insight into the organization of monolayers was provided by surface pressure versus area isotherms, circular dichroism, Fourier transform infrared spectroscopy, and Brewster angle microscopy. In situ grazing-incidence X-ray diffraction (GIXD) revealed that lipopeptides six to eight amino acids in length form a new type of 2D self-organized monolayers that exhibit beta-sheet ribbons segregated by lipid tails. The conclusions drawn from the experimental findings were supported by a representative model based on molecular dynamics simulations of amphiphilic lipopeptides at the vacuum-water interface.     

Molecular organization of a water-insoluble iridium(III) complex in mixed monolayers

In this work, organized mixed monolayers containing a cationic water-insoluble iridium(III) complex, Ir-dye, [Ir(ppy)(2)(tmphen)]PF(6), (tmphen = 3,4,7,8-tetramethyl-1,10-phenanthroline, and ppy = 2-phenylpyridine), and an anionic lipid matrix, DMPA, dimyristoyl-phosphatidic acid, with different molar proportions, were formed by the co-spreading method at the air-water interface. The presence of the dye at the interface, as well as the molecular organization of the mixed films, is deduced from surface techniques such as pi-A isotherms, Brewster angle microscopy (BAM) and reflection spectroscopy. The results obtained remark the formation of an equimolar mixed film, Ir-dye/DMPA = 1:1. BAM images reveal a whole homogeneous monolayer, with gradually increasing reflectivity along the compression process up to reaching the collapse of this equimolecular monolayer at pi approximately equal to 37 mNm(-1). Increasing the molar ratio of DMPA in the mixture, the excess of lipid molecules organizes themselves forming dark flower-like domains of pure DMPA at high surface pressures, coexisting with the mixed Ir-dye/DMPA = 1:1 monolayer. On the other hand, unstable mixed monolayers are obtained by using an initial dye surface concentration higher than the equimolecular one. These mixed Langmuir monolayers have been successfully transferred onto solid substrates by the LB (Langmuir-Blodgett) technique.     

Enantiospecific interactions between cholesterol and phospholipids

The effects of cholesterol on various membrane proteins have received considerable attention. An important question regarding each of these effects is whether the cholesterol exerts its influence by binding directly to membrane proteins or by changing the properties of lipid bilayers. Recently it was suggested that a difference in the effects of natural cholesterol and its enantiomer, ent-cholesterol, would originate from direct binding of cholesterol to a target protein. This strategy rests on the fact that ent-cholesterol has appeared to have effects on lipid films similar to those of cholesterol, yet fluorescence microscopy studies of phospholipid monolayers have provided striking demonstrations of the enantiomer effects, showing opposite chirality of domain shapes for phospholipid enantiomer pairs. We observed the shapes of ordered domains in phospholipid monolayers containing either cholesterol or ent-cholesterol and found that the phospholipid chirality had a great effect on the domain chirality, whereas a minor (quantitative) effect of cholesterol chirality could be observed only in monolayers with racemic dipalmitoylphosphatidylcholine. The latter is likely to derive from cholesterol-cholesterol interactions. Accordingly, cholesterol chirality has only a modest effect that is highly likely to require the presence of solidlike domains and, accordingly, is unlikely to play a role in biological membranes.     

Effects of cholesterol component on molecular interactions between paclitaxel and phospholipid within the lipid monolayer at the air-water interface

Cholesterol is a main component of the cell membrane and could have significant effects on drug-cell membrane interactions and thus the therapeutic efficacy of the drug. It also plays an important role in liposomal formulation of drugs for controlled and targeted delivery. In this research, Langmuir film technique, atomic force microscopy (AFM) and Fourier transform infrared spectroscopy (FTIR) are employed for a systematic investigation on the effects of cholesterol component on the molecular interactions between a prototype antineoplastic drug (paclitaxel) and 1,2-dipalmitoyl-sn-glycerol-3-phosphocholine (DPPC) within the cell membrane by using the lipid monolayer at the air-water interface as a model of the lipid bilayer membrane and the biological cell membrane. Analysis of the measured surface pressure (pi) versus molecular area (a) isotherms of the mixed DPPC/paclitaxel/cholesterol monolayers at various molar ratios shows that DPPC, paclitaxel and cholesterol can form a non-ideal miscible system at the air-water interface. Cholesterol enhances the intermolecular forces between paclitaxel and DPPC, produces an area-condensing effect and thus makes the mixed monolayer more stable. Investigation of paclitaxel penetration into the mixed DPPC/cholesterol monolayer shows that the existence of cholesterol in the DPPC monolayer can considerably restrict the drug penetration into the monolayer, which may have clinical significance for diseases of high cholesterol. FTIR and AFM investigation on the mixed monolayer deposited on solid surface confirmed the obtained results.