Silver ionic conductivity enhancement by network former mixed in oxide-based glasses

Glasses in the binary system xAg₂P₂O₆ − (1 − x)Ag₂Te₂O₅ have been prepared for 0 x 1. For each composition only one glass transition temperature is observed in the temperature range of 180–220 °C. All glasses appear homogeneous considering their optical and electrical properties. Nevertheless, in SEM observations, some glass compositions appear to be heterogeneous after decoration following short nitric acid etching. For each composition, conductivity data obtained in the temperature range of 25–200 °C using impedance techniques obey an Arrhenius relationship with a composition independent pre-exponential term. Variation of the conductivity activation energy with x induces correlative variations of isothermal conductivity curves leading to an increase of the ionic conductivity of about one order of magnitude compared with linearity at 25 °C. This behaviour is discussed with respect to the thermodynamic properties of the glassy solutions.     

Ionic conduction and dielectric relaxation in Ag/Na ion-exchanged aluminosilicate glasses: mixed mobile ion effect and KWW relaxation

Ag⁺/Na⁺ ion-exchanged aluminosilicate glasses with uniform concentration profiles were prepared, and their electrical conductivities were investigated as functions of the ion-exchange ratio and the initial glass compositions. In the case of the ion-exchanged glasses of x20Ag₂O–(1−x)20Na₂O–10Al₂O₃–70SiO₂ in mol%, the conductivity, σ, and its activation energy, E_σ, showed a minimum and a maximum at the same ion-exchange ratio x=0.3, respectively, and the mixed mobile ion effect (MMIE) was observed. The fully ion-exchanged sample attained σ=3.5×10⁻⁵ S/cm at 200 °C, which was 1.5 orders of magnitude larger than that of initial glass. In the case of x25Ag₂O–(1−x)25Na₂O–25Al₂O₃–50SiO₂, the mixed mobile ion effect was also observed at x=0.5. The maximum conductivity of 2×10⁻⁴ S/cm at 200 °C was obtained in the fully ion-exchanged glass sample.

The electric relaxation analysis was also conducted on both systems, and Kohlrausch–Williams–Watts (KWW) fractional exponent β was obtained as a function of x. The decrease of β was observed near x≈0.3 in the former system, while that of the later system was independent of the ion-exchange ratio. Based on the structural analysis results, the observed behaviors were investigated from the point of view of the occupation of Ag⁺ ions on the non-bridging oxygen-site (NBO-site) and the charge compensation-site (CC-site) of AlO₄ tetrahedral unit.     

Electric conductivity and relaxation in ZnF2–AlF3–PbF2–LiF glasses

The electric conductivity of ZnF₂–AlF₃–PbF₂–LiF glasses has been studied in the frequency range 10 Hz–2 MHz and in the temperature range from 300 K to just below the glass transition temperature. The conductivity decreases with the increase in the LiF content in the composition, which results from the trapping of F⁻ ions by Li⁺ ions. Small values of the stretching exponent β are observed for the present glasses. The value of the decoupling index decreases with an increase in LiF content, consistent with the composition dependence of the conductivity.     

Formation of silver colloids in silver ion-exchanged soda-lime glasses during annealing

The structural and compositional changes of the soda-lime glasses during the formation of the silver colloids were analyzed by the X-ray Photoelectron Spectroscopy (XPS) in order to examine the silver colloid formation mechanism. The in situ behavior of silver and SiO₂ networks on the surfaces of silver ion-exchanged soda-lime glasses during heating and cooling processes in ultra-high vaccum was monitored. The results showed that silver diffuses toward the surface, precipitates, and crystallizes during heating and the total silver surface concentration is slowly increased during cooling. The concentration changes of oxidized and neutral Ag, a new non-bridging oxygen species (NBO^*), and a new silicon species (Si[a]) were applied to deduce a disappropriation reaction mechanism of Ag⁺ on the surface during annealing. The SiO₂ network is modified at temperatures below 350°C to accommodate more silver on the surface and to balance the extra charge carried by the Ag⁺. That the SiO₂ network polymerizes during annealing was deduced from the results of the higher binding energies of Si2p and O1s after annealing. This observation suggests that the reduction of the Gibbs free energies and the relaxation of tensile stress result in the formation of the silver colloids under thermal annealing.     

Mixed conductivity in SrCe0.95Yb0.05O3 protonic conductors

The results of electrical conductivity measurements on SrCe_0.95Yb_0.05O₃ under controlled oxygen partial pressure and temperature are presented. A defect model consistent with experimental results is proposed which provides for P_O2^−1/4 dependent n-type, P_o2-independent oxygen ion and P_O2^+1/4 dependent p-type conductivity components. The band gap, reduction, oxidation and ion-migration energies are determined from an analysis of the data in terms of the proposed defect model. These results suggest that some earlier data interpreted in terms of protonic conduction may require re-evaluation.     

DC conductivity of new single and mixed alkali oxyfluorovanadate glasses

New glasses have been prepared according to these formulas (70-x)V₂O₅-30BaF₂-xAF, where AF=LiF or NaF and (60-x)V₂O₅-30BaF₂-10LiF-xAF, where AF=NaF and x=10, 15, 20, 25 and 30 mol%. Density of the glasses was measured and molar volume calculated and they correlated with the AF content. The dc conductivity has been measured in the temperature range from 302 to 453 K. The dc conductivity increases with temperature and V₂O₅ content, while it decreases with the alkali fluoride content. Conductivity has been correlated with the calculated polaron distance, R, and glass transition temperature, T_g. The activation energy, W, increases with the increase in the alkali fluoride, while it decreases with the V₂O₅ content. Some parameters like polaron distance, R, polaron radius, r_p, ion concentrations, n(V), n(Li) or n(Na), hopping energy, W_H, density of localized states at Fermi level, N(E_F), polaron coupling constant, γ_p, polaron band width, J, hopping mobility, μ, and carrier density for electronic conduction, N_c, were calculated to explain the conduction mechanism and behavior of the present glasses.     

Non‐linear conductivity in Coulomb glasses

We have studied the nonlinear conductivity of two‐dimensional Coulomb glasses. We have used a Monte Carlo algorithm to simulate the dynamic of the system under an applied electric field E. We have compared results for two different models: a regular square lattice with only diagonal disorder and a random array of sites with diagonal and off‐diagonal disorder. We have found that for moderate fields the logarithm of the conductivity is proportional to , reproducing experimental results. We have also found that in the nonlinear regime the site occupancy in the Coulomb gap follows a Fermi‐Dirac distribution with an effective temperature T_eff higher than the phonon bath temperature T.     

Electrical conductivity and dynamics of quasi-solidified lithium-ion conducting ionic liquid at oxide particle surfaces

Lithium ion conducting solid-state composites consisting of lithium ion conducting ionic liquid, lithium bis(trifluoromethanesulfonyl)amide (Li-TFSA) dissolved 1-ethyl-3-methyl imidazolium bis(trifluoromethylsulfonyl)amide (EMI-TFSA), denoted by [yMLi⁺][EMI⁺][TFSA⁻] in this study, and various oxide particles such as SiO₂, Al₂O₃, TiO₂ (anatase and rutile) and 3YSZ are synthesized via a liquid route for the molar concentration of lithium, y, to be 1. The composite consists of SiO₂ and the ionic liquid with y = 0.2 was also prepared. The ionic liquid are quasi-solidified at the above oxide particle surfaces when x is below 40 for y = 1 and x is below 30 for y = 0.2, corresponding to the confinable thickness of the ionic liquid at the oxides' surfaces to be approximately 5-10 nm regardless of the oxide compositions. The electrical conductivities of x vol.%[yMLi⁺][EMI⁺][TFSA^-]-SiO₂, Al₂O₃, TiO₂s or 3YSZ composites are evaluated by ac impedance measurements. The quasi-solid-state composites exhibited liquid-like high apparent conductivity, e.g. 10^− 3.3-10^− 2.0 S cm^− 1 in the temperature range of 323-538 K for SiO₂-ionic liquid composites with y = 1. The self-diffusion coefficients of the constituent species of x vol.% [yMLi⁺][EMI⁺][TFSA⁻] (x is below 40, y = 0.2 and 1) − SiO₂ are evaluated by the Pulse Gradient Spin Echo (PGSE)-NMR technique in the temperature range of 298-348 K. By the quasi-solidification of the ionic liquid at SiO₂ particle surfaces, the absolute values of the diffusion coefficients of all constituent species decreased. The SiO₂ surfaces work to promote ionization of ion pair, [EMI⁺][TFSA⁻], while significant influence on the solvation coordination, [Li(TFSA)_n + 1]ⁿ⁻, was not observed. The apparent transport numbers of Li-containing species both in the bulk and the quasi-solidified ionic liquid showed similar values with each other, which was evaluated to be in the range of 0.010-0.017 for y = 0.2 and 0.051-0.093 for y = 1 in the abovementioned temperature range.     

Stretched exponential relaxation and dispersive conductivity behavior in lithium bismuth silicate glasses

Glasses having compositions xLi₂O∙(85 − x)Bi₂O₃∙15SiO₂ (x = 35, 40, and 45 mol%) were prepared by normal melt quenching technique. Electrical relaxation and conductivity in these glasses were studied using impedance spectroscopy in the frequency range from 20 Hz to 1 MHz and in the temperature range from 453 to 603 K. The ac and dc conductivities, activation energy of the dc conductivity and relaxation frequency were extracted from the impedance spectra. The dc conductivity increases with increase in Li₂O content providing modified glass structure and large number of mobile lithium ions. Similar values of activation energy for dc conduction and for conductivity relaxation time indicate that the ions overcome the same energy barrier while conducting and relaxing. The non-exponential character of relaxation processes increases with decrease in stretched exponential parameter ‘β’ as the composition parameter ‘x’ increases. The observed conductivity spectra follow a power law with exponent ‘s’ which increases regularly with frequency and approaches unity at higher frequencies. Nearly constant losses (NCL) characterize this linearly dependent region of the conductivity spectra. A deviation from the ‘master curve’ for various isotherms of conductivity spectra was also observed in the high-frequency region and at low temperatures, which supports the existence of different dynamic processes like NCL in addition to the ion hopping processes in the investigated glass system.     

基于熵的离子导体电导率公式推导

电导率是表示导体导电能力强弱的度量,离子导体的电导率可以通过平均漂移速度求得.文中通过对离子导体的分析,给出一种基于熵的新的推导方法.首先分析系统熵和环境熵的竞争关系,其次运用熵最大原理求出最概然电流,进而导出电导率公式.最后将基于熵的推导方法与漂移速度方法加以区别和对比,并推广到一般导体电导率公式的推导.     

Blended lithium ion conducting polymer electrolytes based on boroxine polymers

A new series of blended polymer electrolytes based on a boroxine polymer (BP) with poly(ethylene oxide) (PEO), an ethylene oxide–propylene oxide copolymer or poly(methyl methacrylate) were prepared. Good room temperature mechanical properties were exhibited by electrolytes containing in excess of 30% PEO. Cationic transference number measurements indicated that a slight improvement in lithium ion conductivity could be achieved by using a mixture of LiCF₃SO₃ and LiN(CF₃SO₂)₂ as the electrolyte salt. Electrolytes incorporating significant proportions of BP exhibited reduced lithium–polymer electrolyte interfacial resistance.     

Synthesis and characterizations of AgSCN nanospheres using AgCl as the precursor

Nanospheres of AgSCN with an average radius of 30–80 nm have been prepared by a simple reaction between AgCl suspension and KSCN in the presence of gelatin. Gelatin played a decisive role as an inhibitor of the direct attack of SCN⁻ ions to AgCl surfaces and coagulation of the growing AgSCN in producing the spherical AgSCN nanoparticles. The products were characterized by X-ray powder diffraction, transmission electron microscopy and X-ray photoelectron spectra techniques. The electrical conductivity of thin films of as-prepared AgSCN nanoparticles and polyethylene oxide (PEO) at room temperature was measured. The maximum value of electrical conductivity of as-prepared AgSCN–PEO was 1.53 × 10⁻⁵ S cm⁻¹.     

Linear dichroism, produced by thermo-electric alignment of silver nanoparticles on the surface of ion-exchanged glass

A heated Ag⁺-doped glass is subjected to an external constant uniform electric field (E_o > 250 V/cm) parallel to its surface. Absorption spectra studies by linear polarized light imply the induction of a linear dichroism in the samples, after the above-mentioned thermo-electrical process. It is found that the increase in the temperature (400 °C ≤ T ≤ 600 °C), results in the formation of neutral silver multimers and clusters on the samples. Dichroism is the result of simultaneous application of the steady uniform electric field and heating. That is, the process aligns the produced silver nanoparticles along the applied electric field (E_o) during the aggregation of silver nano-clusters via dipole-dipole interaction, leading to the formation of chain-like conductive structures.     

On ionic conduction in the α-phase of PbSnF4

The structure re-refinement of tetragonal PbSnF₄ was executed using data reported earlier. The rms amplitude in M2(Sn) site is larger in (001) plane than along the c-axis and the thermal vibrations of F3 fluorine ions are very large, i.e. B_eq = 12.415(20) A². M2F₈ polyhedra form a distorted cube. The fluorine ions on the F3 site are present between the M2 ion layers. The fluorine ions on the F3 site are located between the M2 ion layers and their weak bonds to Sn ions play an important role in the conduction. The ionic conductivity in the (001) plane is higher than that in the 001 direction.     

Mixed electronic and ionic conductivity of LaCo(M)O3 (M=Ga, Cr, Fe or Ni).: V. Oxygen permeability of Mg-doped La(Ga, Co)O3−δ perovskites

The LaGa_1−x−yCo_xMg_yO_3−δ solid solutions with rhombohedrally-distorted perovskite structure were ascertained to form in the concentration range of 0≤y≤0.10 at x=0.60 and 0≤y≤0.20 at x=0.35–0.40. Increasing cobalt content results in increasing electrical conductivity and thermal expansion of the perovskites. Thermal expansion coefficients of the LaGa_1−x−yCo_xMg_yO_3−δ ceramics were calculated from the dilatometric data to vary in the range of 12.4–19.8×10⁻⁶ K⁻¹ at 300–1100 K. Doping La(Ga,Co)O_3−δ solid solutions with magnesium leads to increasing oxygen nonstoichiometry, electronic and oxygen ionic conductivity. Oxygen permeation fluxes through LaGa_1−x−yCo_xMg_yO_3−δ membranes were found to be limited by the bulk ionic conduction and to increase with magnesium concentration, being essentially independent of cobalt content.     

Relaxation studies of spray deposited Bi2Co0.1V0.9O5.35 solid electrolyte thin films on stainless steel substrate

The room temperature-stabilized γ-phase ion conducting Bi₂Co_0.1V_0.9O_5.35 thin film was deposited by spray pyrolysis on stainless steel substrate. The intra-grain and grain interior charge transfer was confirmed in these films with impedance spectroscopic measurements done from 1 Hz to 10 MHz in the temperature range 550 K to 741 K. Impedance data further revealed non-Debye kind of relaxation dispersion in the film. The relaxation frequency ranges from 10 to 100 Hz, which predicts long range jumping of the oxygen ions with chemical diffusivity. The Arrhenius plots for relaxation frequency and grain boundary conductivity were found to have same activation energy revealing grain boundary dominant conduction. The effect of polycrystallinity on relaxation dispersion is investigated for the first time on Bi₂Co_0.1V_0.9O_5.35 thin films using impedance formalism.     

Electrical conductivity improvement of strontium titanate doped lead vanadate glasses by nanocrystallization

The structural and electrical conductivity (σ) of annealed SrTiO₃–PbO₂–V₂O₅ glasses were studied. The annealing of initially glass samples leads to formation of nanocrystalline grains embedded in the glassy matrix. XRD patterns of the glass–ceramic samples show that nanocrystals were embedded in the glassy matrix with an average grain size of 32 nm. The glass–ceramic nanocrystals obtained by annealing at temperatures close to the crystallization temperature T_c exhibit enhancement of electrical conductivity up to four orders of magnitude than initially glasses. The enhancement of the electrical conductivity due to annealing was attributed to two interdependent factors: (i) an increase of concentration of V⁴⁺–V⁵⁺ pairs; and (ii) formation of defective, well-conducting regions along the glass–crystallites interfaces. From the conductivity temperature relation, it was found that small polaron hopping model was applicable at temperature above θ_D/2 (θ_D, the Debye temperature). The electrical conduction at T >θ_D/2 was due to non-adiabatic small polaron hopping (SPH) of electrons between vanadium ions. The parameters obtained from the fits of the experimental data to this model appear reasonable and are consistent with glass composition.     

Numerical study of an ion-exchanged glass waveguide using both two-dimensional and three-dimensional models

A numerical study is carried out to compare the two-dimensional (2-D) case and three-dimensional (3-D) case for the modelling of an ion-exchanged glass waveguide. It is shown that different waveguide widths on the photomask correspond to different ion concentration distributions after an annealing process. A numerical example is presented of two waveguide sections with different widths indicates that due to the abrupt change of the waveguide width, a 3-D theoretical model is required for an accurate prediction of the parameters of ion-exchanged glass waveguides. The good agreement between the modelled and measured results proves that the developed 3-D numerical model can be beneficially utilized in the generalized design of optical devices based on ion-exchange waveguides.     

Al,F-doped new perovskite lithium fast ion conductor Li3x La2/3−x□1/3−2x Ti1−y Al y O3−y F y (x=0.11)

Al, F-doped new perovskite lithium ion conductors (x=0.11) have been prepared by solid state reaction. It is found that a pure perovskite-structured phase with space group of P4mm(99) exits in the composition range of 0<y≤0.10. The sample with y=0.02 possesses the highest ionic conductivity of 1.06×10⁻³ S/cm at room temperature, and its decomposing voltage is 2.3 V. The factors affecting the conductivity of this system are discussed.     

Electrical conductivity of (Ag2S)x-(GeS2)1-x glasses

We clearly demonstrate, on the basis of experimental measurements of the electrical conductivity of (Ag₂S) _x -(GeS₂)_1-x glasses, that the power-law behaviour of the polarization ac conductivity, _ac=A ^s , can be used. The exponents, in this case, should be considered as a function of temperature and frequency. Moreover, the parameters depends on details of the structure, i.e., the nature of disorder.