New pyrano[3,4-b]indoles from 2-hydroxymethylindole and l-dehydroascorbic acid

2-Hydroxymethylindole reacts with l-dehydroascorbic acid under mild conditions to give (3R,3aR,10cS)-3-[(1S)-1,2-dihydroxyethyl]-3a,10c-dihydroxy-3a,5,6,10c-tetrahydrofuro[3′,4′:5,6]pyrano[3,4-b]indol-1(3H)-one. Its tosyl derivative undergoes cyclization to form a pentacyclic ketal derivative.     

Enantioseparation of amino acids by micellar capillary electrophoresis using binary chiral selectors and determination of D-glutamic acid and D-aspartic acid in rice wine

A new chiral capillary electrophoresis (CE) analytical method for the determination of six pairs of amino acid enantiomer-derivatized precapillary with 9-fluorenylmethoxycarbonyl chloride (FMOC) was developed. CE separation parameters such as the pH of background electrolyte, the boric acid concentration, the addition of D-fructose and isopropanol, and the effect of new binary chiral selectors on the electropherograms were investigated. Precapillary and in-capillary derivatization was compared as well. The results showed that enantiomeric separations were obtained with enantio-resolution (Rs) ranged from 2.61 to 9.99 for the FMOC-derivatized amino acid enantiomers except alanine with Rs 1.06. Precapillary derivatization method provides overall better Rs for nearly all the targets except FMOC-aspartate with efficiency up to 1.309?×?10⁶ plates and limit of detection (LOD) down to 2.5?μM. This method was successfully applied to analyze the concentration of the D/L-glutamic acid and D/L-aspartate in seven rice wine samples.     

Flow-injection chemiluminescence determination of ascorbic acid by use of the cerium(IV)-Rhodamine B system

A highly sensitive flow-injection (FI) method with chemiluminescence (CL) detection is used for the determination of l-ascorbic acid. The method is based on the CL reaction of Rhodamine B with cerium(IV) in sulfuric acid media. l-Ascorbic acid is suggested to be a catalyst utilized in the energy-transferred excitation process. The proposed procedure allows quantitation of l-ascorbic acid in the range 3.8×10⁻¹³ to 1.0×10⁻¹⁰ mol l⁻¹ with a correlation coefficient of 0.9998 (n=5) and relative standard deviation (R.S.D.) of 0.92% (n=11) at 1.0×10⁻¹¹ mol l⁻¹. The detection limit (3×blank) was 1.0×10⁻¹³ mol l⁻¹. The method is successfully used to determine l-ascorbic acid in fresh vegetables. The possible mechanism of the chemiluminescence in the system is discussed.     

Preparation and characterization of PtAu hybrid film modified electrodes and their use in simultaneous determination of dopamine, ascorbic acid and uric acid

A novel biosensor was fabricated by electrochemical deposition of platinum and gold nanoparticles (nanoAu) with l-Cysteine on glassy carbon electrode. It was found that the nanoAu particle size distribution range was (50-80 nm), and the platinum particle size range was (200-300 nm). The hybrid film could be produced on gold and transparent indium tin oxide electrodes for different kind of studies such as electrochemical quartz crystal microbalance (EQCM), scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray diffraction (XRD) and electrochemical studies. The PtAu hybrid film was applied to the electro catalytic oxidation of dopamine (DA), ascorbic acid (AA) and uric acid (UA) at pH 4.0 using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques. The modified electrode was quite effective not only to detect DA, AA and UA individually but also in simultaneous determination of these species in a mixture. The overlapping anodic peaks of DA, AA and UA were resolved into three well-defined voltammetric peaks in CV and DPV. The catalytic peak currents obtained from CV and DPV increased linearly with concentration. The relative standard deviation (% R.S.D., n = 10) for AA, DA and UA were less than 2.0% and DA, AA and UA can be determined in the ranges of 0.103-1.65, 0.024-0.384 and 0.021-0.336 mM, respectively. In addition, the modified electrode also shows good sensitivity, and stability. Satisfactory results were achieved for the determination of DA, AA and UA in dopamine injection solution, vitamin C tablets and human urine samples.     

Separation and determination of l-tyrosine and its metabolites by capillary zone electrophoresis with a wall-jet amperometric detection

A method of capillary electrophoresis with wall-jet amperometric detection (AD) has been developed for separation and determination of l-tyrosine (Tyr) and its metabolites, such as Tyramine (TA), p-hydroxyphenylpyruvic (pHPP), homogentisic acid (HGA) and some dipeptides containing Tyr, such as Tyr-Gly-Gly (YGG), Tyr-Arg (YR) and Tyr-d-Arg (Y-d-R). A carbon disk electrode was used as the working electrode and the optimal detection potential was 1.00 V (versus Ag/AgCl). At 18 kV of applied voltage, the seven compounds were completely separated within 20 min in 110 × 10⁻³ mol/L Na₂HPO₄-NaH₂PO₄ buffer (pH 7.10) containing 3 × 10⁻³ mol/L β-cyclodextrin (β-CD). Good linear relationship was obtained for all analytes and the detection limits of seven analytes were in the range of 0.95-4.25 ng/mL. The proposed method has been applied to examine the metabolic process of l-tyrosine in rabbit's urine.     

Continuous-flow/stopped-flow system for determination of ascorbic acid using an enzymatic rotating bioreactor

The high sensitivity that can be attained using an enzymatic system and mediated by hydroquinone, has been verified by on-line interfacing of a rotating bioreactor and continuous flow/stopped-flow/continuous-flow processing. Horseradish peroxidase, HRP, [EC 1.11.1.7], immobilized on a rotating disk, in presence of hydrogen peroxide catalyses the oxidation of hydroquinone to p-benzoquinone, whose electrochemical reduction back to hydroquinone is detected on glassy carbon electrode (GCE) surface at −0.15 V. Thus, when l-ascorbic acid is added to the solution, this acid is reduced chemically (p-benzoquinone to hydroquinone) and acts as mediator of HRP, decreasing the peak current obtained proportionally to the increase of its concentration. The recovery of l-ascorbic acid from four samples ranged from 99.09 to 101.10%. This method could be used to determine l-ascorbic acid concentration in the range 12 nM-3.5 μM (r = 0.998). The determination of l-ascorbic acid was possible with a limit of detection of 6 nM in the processing of as many as 25 samples h⁻¹. The method was successfully applied for the analysis of l-ascorbic acid in pharmaceutical formulations.     

Amperometric l-ascorbic acid biosensors equipped with enzyme micelle membrane

Ascorbate oxidase (ASOD) bound to polymaleimidostyrene (PMS) forms stable ASOD micelle structure in polystyrene (PS) membrane. The oxygen permeable hydrophobic ASOD micelle membrane were coated on both aminated glassy carbon electrode (AGCE) and gold electrode (AuE) for the amperometric detections of l-ascorbic acid (AsA) based on the consumption of oxygen. These AsA sensors have good sensitivities with short response time (within 1 min.). A good linear relationship was observed in the concentration range of 5 μM to 0.4 mM when AGCE was used and the applied potential was −0.5 V vs. Ag/AgCl. Interferences from the reducing agents can be avoided because the detections were conducted at cathodic potential.     

Temperature dependent Raman scattering study of l-ascorbic acid

Temperature dependent Raman study of l-ascorbic acid has been performed from 15 to 418 K. Changes in the wavenumber vs. temperature plots for some internal modes were interpreted as conformational molecular change and the discontinuity in the wavenumber vs. temperature plots along with the appearance of a new vibrational mode in the temperature range 200-270 K suggests that l-ascorbic acid undergoes a structural phase transition. For temperatures higher than 300 K, no relevant modification was observed on the Raman spectra thus indicating a stable structure at high temperatures. Additionally, a correlation between OH stretching wavenumber and the behavior of hydrogen bond is also made.     

Electropolymerisation of L-arginine at carbon paste electrode and its application to the detection of dopamine, ascorbic and uric acid

L-arginine was electropolymerised on a carbon paste electrode (CPE) to form the biopolymer by free radical formation in the electro oxidation process of the amino and carboxylic group containing compound by cyclic voltammetric technique. The modified electrode shows an excellent electrocatalytic activity towards the oxidation of both dopamine (DA) and ascorbic acid (AA). It was demonstrated that the deposited biopolymer has positive charges over the bare carbon electrode surface, which leads to the formation of electrical double layer made the fast electron transfer process could leads to the diffusion of dopamine, ascorbic acid and uric acid on their charge gradient by cyclic voltammetric technique. The response of the sensor was tested towards the different dopamine concentration. The catalytic peak current obtained was linearly related to DA concentrations in the ranges of 5×10(-5) to 1×10(-4)M L(-1) with correlation co-efficient of 0.9924 which reveals the adsorption controlled process. The detection limit for dopamine was 5×10(-7)M L(-1). The interference studies showed that the modified electrode exhibits excellent selectivity in the presence of large excess of ascorbic acid (AA) and response is fast stable, reliable, resistant to biofouling and can be applied for the real sample analysis in medical, pharmaceutical and biotechnological sectors. The adsorption-controlled process and kinetic parameters of the poly(L-arginine) were determined using electrochemical approaches.     

Determination of homocysteine thiolactone, reduced homocysteine, homocystine, homocysteine-cysteine mixed disulfide, cysteine and cystine in a reaction mixture by overimposed pressure/voltage capillary electrophoresis

An elevated level of thiol amino acid homocysteine is associated with several complex disorders. Homocysteine ability to bind proteins, thereby modulating their structure and function, is proposed to be one of the mechanisms of homocysteine induced pathogenecity. Homocysteine and homocysteine thiolactone bind to protein cysteine and lysine residues respectively. A major hurdle in studying protein homocysteinylation is the lack of suitable analytical techniques to determine simultaneously the concentrations of reduced and oxidized forms of homocysteine and cysteine (especially homocysteine-cysteine mixed disulfide) together with thiolactone formed during the reaction of homocysteine or thiolactone with proteins. Herein we report a capillary electrophoresis method to determine simultaneously the levels of these intermediates. For this 40 mmol/L Tris phosphate buffer at (pH 1.60) was used as running electrolyte, and the separation was performed by the simultaneous application of a CE voltage of 15 kV and an overimposed pressure of 0.1 psi. A rapid separation of these intermediates in less than 6 min with a good reproducibility of both peak areas (CV < 2%) and migration time (CV < 0.2%) was obtained. The applicability of our method was validated by incubating reduced homocysteine and albumin and measuring the reaction intermediates in the solution mixture.     

Stereoselective synthesis of the phytotoxic nonenolide herbarumin-I from l-ascorbic acid

A stereoselective synthesis of herbarumin-I in 22% overall yield, starting from l-ascorbic acid derived (S)-2,3-O-isopropylidine glyceraldehyde as a chiral template is reported. Stereoselective allylation and vinylation to control the required stereogenic centres and macrolactonisation followed by a ring-closing metathesis (RCM) are the key steps.     

Determination of L- and D-enantiomers of methotrexate using amperometric biosensors

In order to determine the enantiopurity of methotrexate (Mtx), seven biosensors were proposed for the assay of l-Mtx and three biosensors for the assay of d-Mtx. The biosensors were designed using physical and chemical immobilization of glutamate oxidase and/or l-amino acid oxidase (l-AAOD) and/or horseradish peroxidase (HRP) for the assay of l-methotherexate, and d-amino acid oxidase (d-AAOD) and HRP for the assay of d-Mtx. Electrode characteristics were obtained and compared for the different carbon paste based biosensors. The linear concentration ranges for the proposed biosensors were in the ranges of fmol l⁻¹ to pmol l⁻¹, magnitude order with limits of detection in the fmol l⁻¹ to nmol l⁻¹ concentration range. All biosensors were successful for the determination of the enantiopurity of Mtx as raw material, and in its pharmaceutical formulations (tablets and injections).     

Racemization behavior of l,l-lactide during heating

To control the depolymerization process of poly(l-lactic acid) into l,l-lactide for feedstock recycling, the racemization of l,l-lactide as a post-depolymerization reaction was investigated. In the absence of a catalyst, the conversion to meso-lactide increased with increase in the heating temperature and time at a higher rate than the conversion into oligomers. The resulting high composition of meso-lactide suggests that the direct racemization of l,l-lactide had occurred in addition to the known racemization mechanism that occurs on the oligomer chains. In the presence of MgO, the oligomerization rapidly proceeded to reach an equilibrium state between monomers and oligomers. The equilibrium among l,l-, meso-, and d,d-lactides was found to be a convergent composition ratio l,l-:meso-:d,d-lactides = 1:1.22:0.99 (wt/wt/wt) after 120 min at 300 °C. This composition ratio also indicates that in addition to the known racemization reaction on the oligomer chains, direct racemization among the lactides is also a frequent occurrence.     

A novel capillary electrophoresis method for the determination of d-serine in neural samples

A capillary electrophoresis method has been developed for the determination of d-serine in neural samples. d/l-serine was tagged with naphthalene-2,3-dicarboxaldehyde (CBI-d/l-Ser), and the separation of CBI-d/l-Ser enantiomer was achieved by using a dual chiral selector system consisting of β-cyclodextrin (β-CD) and chiral micelles formed by sodium deoxycholate (SDC). No resolution was observed when either β-CD or SDC was used alone. Moreover, the combined use of β-CD with achiral micelles of sodium dodecylsulfate (SDS) exhibited no resolving effect. With laser induced fluorescence detection, the limit of detection was 3.0 × 10⁻⁸ M Ser. Under the separation conditions selected, no other amino acids co-eluted with l-/d-Ser enantiomers. Using the present method, d-Ser level in Aplysia ganglia homogenates was found to vary significantly from animal to animal. Interestingly, d-Ser was not detected in single neurons isolated from Aplysia ganglia.     

Synthesis of 6-amino-6-deoxy-d-gulono-1,6-lactam and l-gulono-1,6-lactam derived from corresponding 5,6-O-sulfinyl hexono-1,4-lactones

Syntheses of 6-amino-6-deoxy-2,3-O-isopropylidene-d-gulono- and l-gulono-1,6-lactams 3 and 4 from corresponding glycono-1,4-lactones are described. Activation of the primary hydroxyl group requires 5,6-cyclic sulfite intermediate to obtain 6-azido-6-deoxy derivatives, which are cyclized after reduction.     

Swelling and hydrolytic degradation of poly(d,l-lactic acid) in aqueous solutions

Low molecular weight poly(lactic acid) was synthesized by direct polycondensation of lactic acid. The oligomers were characterized by viscometry, light scattering, and gel permeation chromatography (GPC). The swelling behaviour of tablets made of the above polymer immersed in buffer solutions at 37 °C was studied. In the same experiments, the hydrolytic stability of d,l-PLA was assessed by measuring the weight loss after drying the tablets. In order to inhibit any degradation due to bacteria, formaldehyde was added in the solution as biostatic factor. The effect of an incorporated drug on the swelling behaviour of d,l-PLA tablets was also considered. It was found that the incorporation of drug in d,l-PLA tablets increases their swelling index, probably due to the creation of additional porosity in the specimens or other interaction between drug and polymeric matrix.     

Enantioanalysis of l-2-hydroxyglutaric acid in urine samples using enantioselective, potentiometric membrane electrodes based on maltodextrins

Quantitative assay of l-2-hydroxyglutaric acid (l-2-HGA) is important for the diagnosis of l-2-hydroxyglutaric aciduria. Three enantioselective, potentiometric membrane electrodes (EPMEs) based on maltodextrins with different dextrose equivalent (DE) (DE: 4.0-7.0 (I), 13.0-17.0 (II), 16.5-19.5 (III)), were designed for the enantioanalysis of l-2-HGA. The enantioselective, potentiometric membrane electrodes can be used reliably for enantiopurity assay of l-2-HGA using the direct potentiometric method in the ranges of 10⁻⁹-10⁻⁵, 10⁻⁶-10⁻³ and 10⁻⁸-10⁻⁵ mol L⁻¹ for the enantioselective, potentiometric membrane electrodes based on maltodextrins I, II and III, respectively, with very low detection limits. A high reliability was obtained when the electrodes were used for the assay of l-2-HGA in urine samples.     

Determination of l-ascorbic acid in wines by direct injection liquid chromatography using a polymeric column

A rapid method for the identification and quantification of l-ascorbic acid in wines by direct injection liquid chromatography equipped with a UV detection was developed. The levels of ascorbic acid were determined using a polymeric PLRP-S 100 A (5 μm) column (150 mm × 4.6 mm) with a mobile water/trifluoroacetic acid (99/1, v/v) phase. The method is rapid (less than 5 min) and sensitive (LOQ of 5 mg L⁻¹). The calibration curve of ascorbic acid was linear (r = 0.999) over a concentration range between 1 and 200 mg L⁻¹. Repeatability was less than 2.5% and the recovery over 95%.     

Effects of molecular weight and small amounts of d-lactide units on hydrolytic degradation of poly(l-lactic acid)s

Films of poly(l-lactic acid) (PLLA) with different number-average molecular weights (M_n) and d-lactide unit contents (X_d) were made amorphous and the effects of molecular weight and small amounts of d-lactide units on the hydrolytic degradation behavior in phosphate-buffered solution at 37 °C of PLLA were investigated. The degraded films were investigated using gravimetry, gel permeation chromatography, polarimetry, differential scanning calorimetry, X-ray diffractometry, and tensile testing. To exclude the effects of crystallinity on the hydrolytic degradation, the films were made amorphous by melt-quenching. The incorporation of small amounts of d-lactide units drastically enhanced the hydrolytic degradation of PLLA. In the period of 0-32 weeks, the hydrolytic degradation rate constant (k) of PLLA films increased with increasing X_d, while the k values did not depend on M_n. This means that the effects of X_d on the hydrolytic degradation rate of the films are higher than those of M_n. In contrast, in the period of 32-60 weeks neither X_d nor M_n was a crucial parameter to determine k values, probably because in addition to these parameters the differences in the amount of catalytic oligomers accumulated in films and crystallinity affect the hydrolytic degradation behavior of the films. The initially amorphous PLLA films remained amorphous even after the hydrolytic degradation for 60 weeks.     

Simultaneous reactive extraction separation of amino acids from water with D2EHPA in hollow fiber contactors

Reactive extraction separation of binary amino acids from water using a microporous hollow fiber has been studied, in which the acidic extractant di(2-ethylhexyl)phosphoric acid (D2EHPA) was selected as an active carrier dissolved in kerosene. l-Phenylalanine (Phe) was extracted from an aqueous solution through the shell side of module to the organic phase through the lumen of fiber in the extraction module, in which l-Phe was then back-extracted to stripping phase in stripping module. Experiments were conducted as a function of the initial feed concentration of equimolar Phe and l-aspartic acid (l-Asp) (5 mol/m³), feed pH (3–5), the carrier concentration (0.1–0.5 mol/dm³), and stripping acidity (0.1–2 mol/dm³). The effect of process variables on the separation factor of Phe/Asp and the possible transport resistances including aqueous-layer diffusion, membrane diffusion, organic-layer, and interfacial chemical reaction were quantitatively studied and discussed. The high separation factor (β) of Phe/Asp was obtained to be 18.5 at feed pH 5 and 2 mol/dm³ of strip solution (HCl). The extraction and stripping processes appear to rely on pH dependence of the distribution coefficient of amino acids in reactive extraction system. The separation factor (β) was enhanced in hollow fiber membrane (HFM) process compared with conventional solvent process, which was a result of the counter transport of hydrogen ions.