Hg(II), Tl(III), Cu(I), and Pd(II) Complexes with 2,2'-Diphenyl-4,4'-Bithiazole (DPBTZ), Syntheses and X-Ray Crystal Structure of [Hg(DPBTZ)(SCN)2]

Reaction of the ligand 2,2′-diphenyl-4,4′-bithiazole (DPBTZ) with Hg(SCN)₂, Tl(NO₃)₃, CuCl, and PdCl₂ gives complexes with stoichiometry [Hg(DPBTZ)(SCN)₂], [Tl(DPBTZ)(NO₃)₃], [Cu(DPBTZ)(H₂O)Cl]_, and [Pd(DPBTZ)Cl₂]. The new complexes were characterized by elemental analyses and infrared spectroscopy. The crystal structure of [Hg(DPBTZ)(SCN)₂] determined by X-ray crystallography. The Hg atom in the title monomeric complex, (2,2′-diphenyl-4,4′-bithiazole)mercury(II)bisthiocyanate, [Hg(C₁₈H₁₂N₂S₂)(SCN)₂], is four-coordinate having an irregular tetrahedral geometry composed of two S atoms of thiocyanate ions [Hg-S 2.4025(15) and 2.4073(15) Å] and two N atoms of 2,2′-diphenyl-4,4′-bithiazole ligand [Hg-N 2.411(4) and 2.459(4) Å]. The bond angle S(3)-Hg(1)-S(4) of 147.46(5)° has the greatest derivation from ideal tetrahedral geometry. Intermolecular interaction between Hg(1) and two S atoms of two neighboring molecules, 3.9318(15) and 3.9640(18) Å, make the Hg(1) distort from a tetrahedron to a disordered octahedron. The attempts for preparation complexes of Tl(I), Pb(II), Bi(III), Cd(II) ions with 2,2′-diphenyl-4,4′-bithiazole ligand were not successful and also the attempts for preparation complexes of 4,4′,5,5′-tetraphenyl-2,2′-bithizole ligand with Cu(II), Ni(II), Co(II), Co(III), Mn(II), Mn(III), Fe(II), Fe(III), Cr(III), Zn(II), Tl(III), Pb(II), Hg(II), Cu(I), Pd(II) were not successful. This point can be regarded as the initial electron withdrawing of phenyl rings and also their spatial steric effects.     

The reactions of diphenylcarbazide and diphenylcarbazone with cations : Part V. Extraction dissociation constants of the carbazone complexes

Extraction experiments in the system water-toluene on the diphenylcarbazone complexes of Mn(II), Fe(II) and (III). Co(II), Ni(II), Cu(ll), Zn(ll), Cd(II), Hg(I) and (II), Sn(II) and Pb(II) are described. Only uncharged complexes are formed, the formulae of which are for mercury HgD, Hg(HD)₂, Hg₂D and Hg₂(HD)₂ and for the other ions mentioned M(HD)_n, depending on the valence _n of the cation. The extraction dissociation constants, the molar extinction coefficients and the partition coefficients of the complexes funned by the cations studied were obtained, The complexes prove to be far less stable than the corresponding dithizone compounds so that diphenylcarbazone is less suitable for general analytical use than its sulphur analogue.     

Determination of metals in marine species by microwave digestion and inductively coupled plasma mass spectrometry analysis

A microwave digestion method suitable for determination of multiple elements in marine species was developed, with the use of cold vapor atomic spectrometry for the detection of Hg, and inductively coupled plasma mass spectrometry for all of the other elements. An optimized reagent mixture composed of 2 ml of HNO₃, 2 ml of H₂O₂ and 0.3 ml of HF used in microwave digestion of about 0.15 g (dry weight) of sample was found to give the best overall recoveries of metals in two standard reference materials. In the oyster tissue standard reference material (SRM 1566b), recoveries of Na, Al, K, V, Co, Zn, Se, Sr, Ag, Cd, Ni, and Pb were between 90% and 110%; Mg, Mn, Fe, Cu, As, and Ba recoveries were between 85% and 90%; Hg recovery was 81%; and Ca recovery was 64%. In a dogfish certified reference material (DORM-2), the recoveries of Al, Cr, Mn, Se, and Hg were between 90% and 110%; Ni, Cu, Zn, and As recoveries were about 85%; and Fe recovery was 112%. Method detection limits of the elements were established. Metal concentrations in flounder, scup, and blue crab samples collected from coastal locations around Long Island and in the Hudson River estuary were determined.     

Phase Transitions in Crystalline [M(H2O)6](ClO4)2 (M=Mg,Mn, Fe,Co, Ni,Cu, Zn,Cd and Hg)

The results of DSC measurements in the temperature range 140–370 K on nine crystalline compounds of the type [M(H₂O)₆](ClO₄)₂, where M=Mg, Mn, Fe, Co, Ni, Cu, Zn, Cd and Hg, are discussed. Anomalies detected in the DSC curves are related to the existence of solid-solid phase transitions and/or to the melting points of these compounds. In consequence of two different hypothetical structural modifications of [Fe(H₂O)₆](ClO₄)₂, two DSC curves are obtained. For the compounds with M=Fe, Cd and Hg, new phase transitions have been discovered. The transition temperatures of the other phase transitions are in good agreement with literature data obtained by adiabatic calorimetry. For the compounds with M=Mg, Ni and Cd, DTA measurements were also carried out and the melting points of theses compounds were established. This revised version was published online in August 2006 with corrections to the Cover Date.     

Solubility of ferrocyanides and ferricyanides in sodium pyrophosphate

1. Prussian blue and the ferrocyanides of Cu, Cd, Zn, Ni, Co, Mn, UO₂ are dissolved by sodium pyrophosphate. Na₄[Fe(CN)₆] and the water soluble double sodium pylophosphates of the afore mentioned metals are formed. 2. The Ferricyanides of Cu, Cd, Zn, Ni, Co, react with sodiun pyrophospate forming Na₃[Fe(CN)₆] and the water soluble sodium double pyrophosphates of the aforementioned metals.     

Molybdenum(VI) Oxide-Modified Silica Gel as a Novel Sorbent for the Simultaneous Solid-Phase Extraction of Eight Metals with Determination by Flame Atomic Absorption Spectrometry

A silica-based inorganic sorbent was synthesized by the thermal decomposition of ammonium heptamolybdate on silica and applied for the preconcentration and simultaneous determination of Cd, Co, Cr, Cu, Fe, Mn, Ni, and Pb in river water samples using a column system with flame atomic absorption spectrometry. Attenuated total reflection-Fourier transformation infrared spectroscopy, scanning electron microscopy, and electron dispersive spectroscopy were used for sorbent characterization. The effects of pH, sample volume, eluent type, eluent concentration, eluent volume, sample flow rate, and matrix ions (Al, Bi, Ca, Mg, and Zn) on the recovery of the metals in model solutions were investigated. The adsorption capacities (µmol g^?1) of SiO₂-MoO₃ were 88.96 (Cd), 169.69 (Co), 153.85 (Cr), 188.88 (Cu), 179.05 (Fe), 163.81 (Mn), 136.31 (Ni), and 38.61 (Pb). The detection limits of the method were 9.09, 10.82, 10.77, 49.57, 31.64, 6.40, 8.86, 19.15?µg L^?1 for Cd, Co, Cr, Cu, Fe, Mn, Ni, and Pb, respectively, with a preconcentration factor of 25. The developed method was used for the determination of the target metals in real samples and the recoveries for spiked samples were found to be from 91.2% to 102.9%.     

Certification of trace element contents (As, Cd, Co, Cu, Fe, Mn, Hg, Na, Pb and Zn) in a fly ash obtained from the combustion of pulverised coal

Summary The element contents of As, Cd, Co, Cu, Fe, Mn, Hg, Na, Pb und Zn of a fly ash from pulverised coal are certified. The procedures and their results for the homogenisation, the contamination and homogeneity checks and the analytical campaign are reported. The certified mass fractions and indicative values for Cr, Ni, Th, V and water soluble sulphate are given. The work was carried out within the framework of the activities of the Community Bureau of Reference (BCR) of the Commission of the European Communities.

---

Zertifizierung von Spurengehalten (As, Cd, Co, Cu, Fe, Mn, Hg, Na, Pb und Zn) in einer Flugasche aus Pulverkohle

Zusammenfassung In einer Flugasche aus Pulverkohle wurden die Elementgehalte an As, Cd, Co, Cu, Fe, Mn, Hg, Na, Pb und Zn zertifiziert. Über die Homogenisierung, die Kontrolle der Kontaminierung und Homogenität und die analytischen Ringversuche wird berichtet. Die zertifizierten Gehalte sowie der Gehalt von Cr, Ni, Th, V und wasserlöslichem Sulfat werden gegeben. Die Arbeit wurde ausgeführt im Rahmen des Programms des Referenzbüros der Kommission der Europäischen Gemeinschaften (BCR).

     

Certification of the contents of some heavy metals (Cd, Cu, Hg, Ni, Pb and Zn) in three types of soils

Summary The element contents of Cd, Cu, Hg, Ni, Pb and Zn of three types of soil were certified. The preparation, homogeneity and stability are reported. The certified contents as well as values for Co, Cr, Mn and Se and for the aqua regia soluble contents Cd, Cr, Cu, Mn, Ni, Pb and Zn are given.

---

Zertifizierung von Schwermetallspuren (Cd, Cu, Hg, Ni, Pb und Zn) in drei Bodenproben

Zusammenfassung In drei verschiedenen Bodenproben wurden die Elementgehalte an Cd, Cu, Hg, Ni, Pb und Zn zertifiziert. Es wird berichtet über die Bereitung, Homogenität und Stabilität. Die zertifizierten Gehalte sowie der Gehalt an Cr, Co, Mn und Se und der Gehalt an königswasserlöslichem Cd, Cr, Cu, Mn, Ni, Pb und Zn werden angegeben.

     

Monitoring of inorganic species distribution in water and sediments of Aso river

Analytical results are reported for the determination of inorganic species in water and sediments sampled in the Aso river ecosystem. The species determined are Cd, Co, Cr, Cu, Fe, Mn, Ni, Zn, Hg, F-, NO3-, SO4--, Na, K, Ca, Mg, NH4+ in water, and Cd, Co, Cr, Cu, Fe, Mn, Ni, Zn, Hg in sediments. For all the elements, in addition to detection limits, precision and accuracy are given: the former, expressed as relative standard deviation (Sr), and the latter, expressed as relative error (e), were good, being in all cases lower than 6%.     

Spatial and temporal distribution of inorganic species in water and sediments of the Tronto River ecosystem

Analytical results are reported for the determination of inorganic species in water and sediments sampled in the Tronto river ecosystem. The species determined are Cd, Co, Cr, Cu, Fe, Mn, Ni, Zn, Hg, F, NO3-, SO4-, Na, K, Ca, Mg, NH4+ in integrated water, and Cd, Co, Cr, Cu, Fe, Mn, Ni, Zn, Hg in sediments. For all the elements, in addition to detection limits, precision and accuracy are given: the former, expressed as relative standard deviation (Sr), and the latter, expressed as relative error (e), were good, being in all cases lower than 5%.     

Mineral constituents of edible parasol mushroom Macrolepiota procera (Scop. ex Fr.) Sing and soils beneath its fruiting bodies collected from a rural forest area

Concentrations and interrelationships of twenty elements were studied in parasol mushroom and in the top layer of soil (0–10 cm) from the area of Kiwity (Poland). K, P, Mg, Ca, and Zn were found to be the most abundant elements in the mushroom. Higher concentrations of Fe, Mn, Na, Ni occurred in stipes then in caps, while Cd, Cr, Cu, Hg, Rb dominated in caps. Ag, Al, and Ba concentrations in caps and stipes were similar. Parasol mushroom is efficient in up-take and separation of Ag, Cd, Cu, Hg, K (in caps, the bioconcentration factor is BCF ≥ 100), Na, P, Rb (50 < BCF < 100), and Mg, Zn (BCF > 10) in its fruiting bodies, while Al, Ba, Ca, Co, Cr, Fe, Mn, Sr, and Pb are eliminated (BCF < 1). Parasol mushroom from rural forest area in the north-eastern region of Poland is of hygienic concern for human health because of toxic mercury and cadmium content in the edible caps, which are also rich in essential Cu, Fe, and their K, Mn, and Zn content is also high.     

Evolution of anthropogenic aerosols in the coastal town of Salina Cruz,Mexico: part III size-segregated elemental composition analysed by total-reflection X-ray fluorescence spectrometry

Heavy metals in various size modes of the atmospheric aerosol are a concern for human health. Their and other elements’ concentrations are indicative for anthropogenic and natural aerosol sources. Si, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Br, Rb, Sr, Hg, and Pb were determined as a complementary contribution to a study on aerosol cycling during the wet season, June 2004, in a humid, subtropical climate, i.e. in the city of Salina Cruz, situated on the Pacific coast of the Isthmus of Tehuantepec (16.2°N, 95.2°W), Mexico. For mass (gravimetry) and elemental analyses, particles were collected by a Berner low-pressure round nozzle cascade impactor using four stages corresponding to 0.1–0.25, 0.25–1.0, 1.0–4.0, and 4–16?µm of aerodynamic particle size. The impaction plates were modified such that approx. 1/6 consisted of a plastic support (Persplex®) for total reflection X-ray fluorescence spectrometry (TXRF). The elements’ total content was determined by TXRF without any further sample pretreatment. Limits of quantification (LOQ) for elemental content in individual impactor stages corresponded to 25–60?ng?m^?3 for Si; 0.8–4?ng?m^?3 for Cl, K, Ca, Ti, and V; 3–20?pg?m^?3 for Cr, Mn, Fe, Cu, Ni, and Zn; and 7–50?pg?m^?3 for As, Se, Br, Rb, Sr, Hg, and Pb. In some samples, however, high blank values for the supports gave an LOQ?=?6–19?ng?m^?3 for Cl; 3--7?ng?m^?3 for Ca; 3–7?ng?m^?3 for Fe, Ni, Cu, and Zn; and 60–70?ng?m^?3 for Pb. The influence of local natural, industrial, and vehicle traffic sources for heavy-metal mobilization was obvious. Heavy-metal abundances did not coincide with regionally distributed pollutants. V and Ni were found at particularly elevated levels advected with the sea breeze, which points to ships as sources. Br and Pb were found at particularly low levels. The concentrations of Br, Rb, Sr, and Pb were found below LOQ at least in some, As, Co, Se, and Hg in all of the samples. The elements’ characteristic differences in mass size distributions were obvious despite the coarse size resolution. During the cycling of air masses from land to sea and back again, enrichment of super-micrometre particles in the near ground aerosol was observed under dry weather conditions. Rain preferentially removed the large particles with which heavy metals have been associated.     

Intercomparison of five methods for the determination of trace metals in sea water

Trace elements (Mn, Fe, Co, Zn, Ni, Cu and Cr) were preconcentrated from sea water by retention on Chelex-100 resin, APDC/8-quinolinol complexation followed by extraction with 4-methyl-2-pentanon or Freon-113, or coprecipitation with Mg(OH)₂ or Fe(OH)₂. After consideratin of analytical blanks, extraction efficiency, precision preconcentration factor, and suitability for operation on board ship, the best results were obtained by preconcentrating Mn, Fe, Co, Zn, Ni and Cu on Chelex-100 resin and coprecipitation of chromium(III) and (VI) with Fe(OH)₂. Graphite-furnace atomic absorption spectrometry and inductively-coupled plasma atomic emission spectrometry were used for the final measurements. The accuracy of the method was tested by using the reference sea water sample NASS-1.     

Certification of the contents of some heavy metals (Cd, Co, Cu, Mn, Hg, Ni, Pb and Zn) in three types of sewage sludge

Summary The element contents of Cd, Co, Cu, Mn, Hg, Ni, Pb and Zn of three different types of sewage sludge were certified. The preparation, the homogeneity and the stability are reported. The certified contents as well as values for Cr and Se and for the aqua regia soluble contents of Cd, Cr, Co, Cu, Mn, Ni, Pb and Zn are given.

---

Zertifizierung von Schwermetallspuren (Cd, Co, Cu, Mn, Hg, Ni, Pb und Zn) in drei Klärschlammproben

Zusammenfassung In drei verschiedenen Klärschlammproben wurden die Elementgehalte an Cd, Co, Cu, Mn, Hg, Ni, Pb und Zn zertifiziert. Es wird berichtet über die Herstellung, Homogenität und Stabilität. Die zertifizierten Gehalte sowie der Gehalt von Cr, Se und der Gehalt an königswasserlöslichem Cd, Cr, Co, Cu, Mn, Ni, Pb und Zn werden angegeben.

     

New homoleptic metal complexes of Schiff bases derived from 2,4-di-p-tolyl-3-azabicyclo[3.3.1]nonan-9-one

New bidentate Schiff-base ligands 2-(2,4-di-p-tolyl-3-azabicyclo[3.3.1]nonan-9-ylidene)hydrazinecarbothioamide HL¹ and 2-(2,4-di-p-tolyl-3-azabicyclo[3.3.1]nonan-9-ylidene)hydrazinecarboxamide HL² were synthesized from the condensation of 2,4-di-p-tolyl-3-azabicyclo[3.3.1]nonan-9-one with thiosemicarbazide and semicarbazide, respectively. Homoleptic complexes of these ligands, of general formula K[Cr(L ⁿ )₂Cl₂], K₂[Mn(L ⁿ )₂Cl₂], K₂[Fe(L¹)₂Cl₂] and [M(L ⁿ )₂] (where M = Co(II), Ni(II) Cu(II), Zn(II), Cd(II), and Hg(II) ions; n = 1 or 2) are reported. The mode of bonding and overall geometry of the complexes were determined through IR, UV-Vis, NMR and mass spectral studies, magnetic moment measurements, elemental analysis, metal content, and conductance. These studies revealed octahedral geometry for Cr(III), Mn(II), and Fe(II) complexes, square planar for Cu(II), Co(II), and Ni(II) complexes and tetrahedral for Zn(II), Cd(II), and Hg(II) complexes.     

Inorganic species in water and sediments of the Lamone and Marzeno rivers ecosystem

Analytical results are reported for the determination of inorganic species in water and sediments sampled in the Lamone and Marzeno rivers ecosystem. The species determined are Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Zn, Hg, F-, Cl- Br-, NO3-, SO4--, Na+, K+, Mg++, Ca++, NH4+ in superficial water, and Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Zn, Hg in sediments. For all the elements, in addition to detection limits, precision and accuracy are given: the former, expressed as relative standard deviation (s(r)), and the latter, expressed as relative error (e), were good, being in all cases lower than 6%.     

Senio river ecosystem: characterization and distribution of inorganic species in water and sediments

Analytical results are reported for the determination of inorganic species in water and sediments sampled in the Senio river ecosystem. The species determined are Cu, Pb, Cd, Zn, Co, Cr, Ni, Fe, Mn, Hg, F-, Cl-, Br, NO3-, SO4-, Na+, K+, Ca++, Mg++, NH4+ in integrated water, and Cu, Pb, Cd, Zn, Co, Cr, Ni, Fe, Mn, Hg in sediments. For all the elements, in addition to detection limits, precision and accuracy are given: the former, expressed as relative standard deviation (sr), and the latter, expressed as relative error (e), were good, being in all cases lower than 6%. Limitedly to Cu, Pb, Cd and Zn a critical comparison with voltammetric measurements is also discussed.     

Metal‐Organic Niccolite: Synthesis,Structures, Phase Transition,and Magnetic Properties of [CH3NH2(CH2)2NH2CH3][M2(HCOO)6] (M=divalent Mn,Fe, Co,Ni, Cu and Zn)

We report the synthesis, crystal structures, thermal and magnetic characterizations of a family of metal‐organic frameworks adopting the niccolite (NiAs) structure, [dmenH₂²⁺][M₂(HCOO)₆²⁻] (dmen=N,N′‐dimethylethylenediamine; M=divalent Mn, 1Mn ; Fe, 2Fe ; Co, 3Co ; Ni, 4Ni ; Cu, 5Cu ; and Zn, 6Zn ). The compounds could be synthesized by either a diffusion method or directly mixing reactants in methanol or methanol–water mixed solvents. The five members, 1Mn , 2Fe , 3Co , 4Ni , and 6Zn are isostructural and crystallize in the trigonal space group P 1c, while 5Cu crystallizes in C2/c. In the structures, the octahedrally coordinated metal ions are connected by anti–anti formate bridges, thus forming the anionic NiAs‐type frameworks of [M₂(HCOO)₆²⁻], with dmenH₂²⁺ located in the cavities of the frameworks. Owing to the Jahn–Teller effect of the Cu²⁺ ion, the 3D framework of 5Cu consists of zigzag Cu‐formate chains with Cu OCHO Cu connections through short basal Cu O bonds, further linked by the long axial Cu O bonds. 6Zn exhibits a phase transition probably as a result of the order–disorder transition of the dmenH₂²⁺ cation around 300 K, confirmed by differential scanning calorimetry and single crystal X‐ray diffraction patterns under different temperatures. Magnetic investigation reveals that the four magnetic members, 1Mn , 2Fe , 3Co , and 4Ni , display spin‐canted antiferromagnetism, with a Néel temperature of 8.6 K, 19.8 K, 16.4 K, and 33.7 K, respectively. The Mn, Fe, and Ni members show spin‐flop transitions below 50 kOe. 2Fe possesses a large hysteresis loop with a large coercive field of 10.8 kOe. The Cu member, 5Cu , shows overall antiferromagnetism (both inter‐ and intra‐chains) with low‐dimensional characteristics.     

Phenoxo-bridged symmetrical homobinuclear complexes derived from an “end-off” compartmental ligand, 2,6- bis [5′-chloro-3′-phenyl- 1H -indole-2′-carboxamidyliminomethyl]-4-methylphenol

A compartment ligand 2,6-bis[5′-chloro-3′-phenyl-1H-indole-2′-carboxamidyliminomethyl]-4-methylphenol was prepared and homobinuclear phenol-bridged Cu(II), Ni(II), Co(II), Zn(II), Cd(II), Hg(II), Fe(III), and Mn(II) complexes have been prepared by the template method using the precursors 2,6-diformyl-4-methylphenol, 5-chloro-3-phenylindole-2-carbohydrazide and metal chlorides in 1 : 2 : 2 ratio, respectively. The complexes were characterized by elemental analyses, conductivity measurements, magnetic susceptibility data, IR, NMR, FAB mass and ESR spectra, TGA, and powder XRD data. Cu(II), Co(II), Zn(II), Cd(II) and Hg(II) complexes exhibit square pyramidal geometry whereas Ni(II), Mn(II), and Fe(III) complexes are octahedral. Low magnetic moment values for Cu(II), Ni(II), Co(II), Fe(III), and Mn(II) complexes show antiferromagnetic spin-exchange interaction between two metal centers in binuclear complexes. The ligand and its complexes were tested for antibacterial activity against Escherichia coli and Staphyloccocus aureus, and antifungal activity against Aspergillus niger and Candida albicans.     

Magnetic and spectral studies on N-(thiophene-2-carboxamido)salicylaldimine complexes of some bivalent 3d metal ions

Metal(II) complexes of N-(thiophene-2-carboxamido)salicylaldimine (H₂TCS) of types M(H₂TCS)₂Cl₂ [M = Ni, Cu and Zn], M(HTCS)Cl [M = Co, Ni and Cu], M(HTCS)₂ [M = Mn, Fe, Co, Ni, Cu and Zn], M(TCS)·xH₂O [M = Mn, Co and Ni, x = 2; M = Cu, x = 0], Ni(TCS)py₂ and Cu(TCS)py have been prepared. Elemental analyses, molar conductance, magnetic moment, electronic, IR and ESR spectral studies have been used to characterize these complexes. The different modes of chelation of the ligand and the stereochemistry of the complexes are discussed.