Design and development of microfabricated capillary electrophoresis devices with electrochemical detection

Our efforts have been focused on developing a self-contained and transportable microfabricated electrophoresis (CE) system with integrated electrochemical detection (ED). The current prototype includes all necessary electrodes “on-chip” and utilizes miniaturized CE and ED supporting electronics custom designed for this purpose. State-of-the-art design/modeling tools and novel microfabrication procedures were used to create recessed platinum electrodes with complex geometries and the CE/ED device from two patterned ultra-flat glass substrates. The electrodes in the bottom substrate were formed by a self-aligned etch and deposition technique followed by a photolithographic lift-off process. The microchannels (20 μm deep×65 μm wide (average)) were chemically etched into the top substrate followed by thermal bonding to complete the microchip device. CE/ED experiments were performed using 0.02 M phosphate buffer (pH 6), an analyte/buffer solution (2.2 mM dopamine, 2.3 mM catechol) and varying separation voltages (0-500 V) with a custom electronics unit interfaced to a laptop computer for data acquisition. Detection limits (S/N=3) were found to be at the micromolar level and a linear detection response was observed up to millimolar concentrations for dopamine and catechol. The microchip CE/ED system injected 50 pl volumes of sample, which corresponded to mass detection limits on the order of 200 amol. For the first time, an integrated “on-chip” multi-electrode array CE/ED device was successfully designed, fabricated and tested. The majority of the electrodes (six out of eight) in the array were capable of detecting dopamine with the amplitude of the signal (i.e., peak heights) decreasing as the electrode distance from the channel exit increased.     

Analytical performance of commercially available and unavailable phenolic compounds using real samples by high-performance liquid chromatography-diode-array detection

This work examines a novel approach of coupling high-performance liquid chromatography with diode-array detection as applied to the study of the analytical performance of the main phenolic classes contained in real samples. The chromatographic behavior of the main phenolic classes (benzoic and cinnamic acids and flavan-3-ols, flavonols and flavones as subclass of flavonoids) is carefully examined using real legume samples. Extracts from lentils proved to be excellent “real sample” because they contained the most important classes of phenolics that were subjected to current analysis. Benzoic and cinnamic acids, flavan-3-ols, flavonol and flavones were definitely or provisionally identified. Robustness, extraction efficiencies and accuracy were thoroughly scrutinized to reach quality results. Extracts showed an excellent stability according to their retention times in relative standard deviation (R.S.D.≤3%) and high reproducibility in peak area (R.S.D.≤5%). High reproducibility was also observed in calibration slopes (R.S.D.≤7%). Detection limits ranged between 0.09 and 0.64 μg/ml and, thus, showed full capacity for the determination of these compounds. Accuracy was carefully evaluated by studying extraction efficiencies and recoveries from well-known phenolic standards. The high recoveries (≥95%) obtained from the well-known phenolic structures of all representative phenolic classes allowed us to evaluate the accuracy of poorly known and commercially unavailable phenolic structures. The satisfactory analytical performance of currently employed methods had justified their recruitment for the quantification of phenolics in the study samples.     

Online determination of copper in aluminum alloy by microchip solvent extraction using isotope dilution ICP-MS method

Isotope dilution mass spectroscopy (IDMS)/ICP-MS combined with microchip solvent extraction was successfully applied for the online determination of copper in an aluminum alloy. The microchip solvent extraction was developed for the separation of Cu from major element, and optimal pH range was wider than that of the batchwise extraction method. The dimensions of the microchip were 30 mm × 70 mm and that of micro-channel on the microchip was 180 μm wide and 40 μm deep. The copper complex with 8-hydroxyquinoline was extracted into o-xylene at pH 5.5 and back extracted with 0.1 mol l⁻¹ nitric acid at flow rate of 20 μl min⁻¹. The total extraction efficiency (water/organic solvent/nitric acid) was around 40%. IDMS/ICP-MS was coupled with solvent extraction for precise determination of Cu. The extraction and back-extraction on the microchip took about 1 s and the total measurement time for the IDMS/ICP-MS was about 40 s/sample. The blank value of this method was 0.1 ng g⁻¹. The proposed method was used for the determination of Cu in Al standard materials (JSAC 0121-C, The Japan Society for Analytical Chemistry and 7074 Al alloy, Nippon Light Metal Co. Ltd.). The obtained analytical results are in good agreement with the certified values.     

A fast and highly sensitive detection of cholesterol using polymer microfluidic devices and amperometric system

In this work, the rapid detection of cholesterol using poly(dimethylsiloxane) microchip capillary electrophoresis, based on the coupling of enzymatic assays and electrochemical detection, was developed. Direct amperometric detection for poly(dimethylsiloxane) (PDMS) microchip capillary electrophoresis was successfully applied to quantify cholesterol levels. Factors influencing the performance of the method (such as the concentration and pH value of buffer electrolyte, concentration of cholesterol oxidase enzyme (ChOx), effect of solvent on the cholesterol solubility, and interferences) were carefully investigated and optimized. The migration time of hydrogen peroxide, product of the reaction, was less than 100 s when using 40 mM phosphate buffer at pH 7.0 as the running buffer, a concentration of 0.68 U/mL of the ChOx, a separation voltage of +1.6 kV, an injection time of 20 s, and a detection potential of +0.5 V. PDMS microchip capillary electrophoresis showed linearity between 38.7 μg/dL (1 μM) and 270.6 mg/dL (7 mM) for the cholesterol standard; the detection limit was determined as 38.7 ng/dL (1 nM). To demonstrate the potential of this assay, the proposed method was applied to quantify cholesterol in bovine serum. The percentages of recoveries were assessed over the range of 98.9-101.8%. The sample throughput was found to be 60 samples per hour. Therefore, PDMS microchip capillary electrophoresis, based on the coupling of enzymatic assays and electrochemical detection, is very rapid, accurate and sensitive method for the determination of cholesterol levels.     

Quantitative fingerprinting by headspace—Two-dimensional comprehensive gas chromatography–mass spectrometry of solid matrices: Some challenging aspects of the exhaustive assessment of food volatiles

The study proposes an investigation strategy that simultaneously provides detailed profiling and quantitative fingerprinting of food volatiles, through a “comprehensive” analytical platform that includes sample preparation by Headspace Solid Phase Microextraction (HS-SPME), separation by two-dimensional comprehensive gas chromatography coupled with mass spectrometry detection (GC × GC–MS) and data processing using advanced fingerprinting approaches.     

Optimisation of the method for determination of the temperature of saturation in wines

The temperature of saturation of potassium hydrogentartrate (KHT) in wines was studied as an analytical parameter for wine tartaric stability evaluation. Two types of wines were used: “Vinho Verde” and “Port wine”. The temperature of saturation was determined by the intersection of the plots of conductivity versus temperature for a wine sample and the same wine sample with added KHT, by raising the temperature. The heating rate used was optimised in terms of accuracy and time necessary for the determination. An optimal value of 0.5 °C min⁻¹ was found for both types of wine. The saturation temperature was determined for eight untreated wines and after two different tartaric stabilisation treatments, cold stabilisation and electrodialysis. The temperature of saturation values allowed the evaluation of the tartaric stability achieved and the comparison of the two treatments.     

Miniaturized capillary electrophoresis system with a carbon nanotube microelectrode for rapid separation and detection of thiols

Multi-walled carbon nanotube (CNT) was mixed with epoxy to fabricate microdisc electrode used as a detector for a specially designed miniaturized capillary electrophoresis (CE)-amperometric detection system for the separation and detection of several bioactive thiols. The end-channel CNT amperometric detector offers favourable signal-to-noise characteristics at a relatively low potential (0.8 V) for detecting thiol compounds. Factors influencing the separation and detection processes were examined and optimized. Four thiols (homocysteine, cysteine, glutathione, and N-acetylcysteine) have been separated within 130 s at a separation voltage of 2000 V using a 20 mM phosphate running buffer (pH 7.8). Highly linear response is obtained for homocysteine, cysteine, glutathione, and N-acetylcysteine over the range of 5-50 μM with detection limits of 0.75, 0.8, 2.9, and 3.3 μM, respectively. Good stability and reproducibility (R.S.D. < 5%) are obtained reflecting the minimal adsorption of thiols at the CNT electrode surface. The new microchip protocol should find a wide range of bioanalytical applications involving assays of thiol compounds.     

Micro-extraction procedures for the determination of Ra-226 in well waters by SF-ICP-MS

The radium-226 (t_1/2 = 1622 years) content of highly alkaline well water collected from the United Arab Emirates (UAE) was measured by double focusing sector-field inductively coupled plasma-mass spectrometry (SF-ICP-MS) after separation of the radium from other alkaline earth elements using a newly developed procedure. The results were comparable with those obtained by α-spectrometry for samples with concentrations ranging from 6.75 to 459 pg/L (0.25 to 17 Bq/L). Instrumental sensitivity on matrix-free samples was compared for two sample introduction systems, i.e. an Apex-Q high sensitivity system and a concentric nebulizer. A 12-fold improvement in sensitivity (instrumental detection limit = 1.5 pg/L or 55 mBq/L) was found when the Apex-Q system was used. Two chromatographic methods were tested for the sequential separation of the alkaline earth elements contained in the well water samples in order to reduce matrix and polyatomic interference effects. Optimal elution parameters were determined and used for the separation and pre-concentration of Ra-226 in those samples. A method detection limit of 0.189 pg/L (7 mBq/L), which corresponds to a mass of 0.38 fg of Ra-226 in the sample, was achieved. Only 2 mL of sample is necessary when a combination of 50 W-X8 and Sr*Spec resin, which are reusable, are utilized for the separation. This new analytical protocol significantly reduces sample preparation time resulting in a throughput rate of approximately 20 samples in only 8 h; faster than the other published extraction procedures.     

Sensitive and selective detection of aspartic acid and glutamic acid based on polythiophene-gold nanoparticles composite

In recent years, gold nanoparticles and water-soluble fluorescent conjugated polymers are promising materials in terms of their potential applications in a variety of fields, ranging from monitoring DNA hybridization to demonstrate the interaction between proteins, or detecting diseased cell, metal ions and small biomolecular. In order to exploit some new properties of the both, many attempts have been devoted to achieve nanoparticle-polymer composite via incorporating metal nanoparticle into polymer or vice versa, however, only few of them are put into practical application. In the present paper, we utilize the “superquenching” property of AuNPs to polythiophene derivatives for detecting aspartic acid (Asp) and glutamic acid (Glu) in pure water, and discuss the factors accounting for fluorescence quenching and recovery via modulating pH. Thus an exceptionally simple, rapid and sensitive method for detecting Asp and Glu is established with a limit of detection (LOD) is 32 nM for Asp and 57 nM for Glu, the linear range of determination for Asp is 7.5 × 10⁻⁸ M to 6 × 10⁻⁶ M and 9.0 × 10⁻⁸ M to 5 × 10⁻⁶ M for Glu. The system is applied to real sample detection and the results are satisfying. Otherwise the composite is very sensitive to pH change of solution, we expect it will be possible to use as pH sensor with wide range in the future.     

Fabrication of SU-8 based microchip electrophoresis with integrated electrochemical detection for neurotransmitters

A new SU-8 based microchip capillary electrophoresis (MCE) device has been developed for the first time with integrated electrochemical detection. Embedded electrophoretic microchannels have been fabricated with a multilayer technology based on bonding and releasing steps of stacked SU-8 films. This technology has allowed the monolithic integration in the device of the electrochemical detection system based on platinum electrodes. The fabrication of the chips presented in this work is totally compatible with reel-to-reel techniques, which guarantee a low cost and high reliability production. The influence of relevant experimental variables, such as the separation voltage and detection potential, has been studied on the SU-8 microchip with an attractive analytical performance. Thus, the effective electrical isolation of the end-channel amperometric detector has been also demonstrated. The good performance of the SU-8 device has been proven for separation and detection of the neurotransmitters, dopamine (DA) and epinephrine (EP). High efficiency (30,000-80,000 N/m), excellent precision, good detection limit (450 nM) and resolution (0.90-1.30) has been achieved on the SU-8 microchip. These SU-8 devices have shown a better performance than commercial Topas (thermoplastic olefin polymer of amorphous structure) microchips. The low cost and versatile SU-8 microchip with integrated platinum film electrochemical detector holds great promise for high-volume production of disposable microfluidic analytical devices.     

Comparative chemometric analyses of geographic origins and compositions of lavandin var. Grosso essential oils by mid infrared spectroscopy and gas chromatography

Lavandin, a sterile hybrid of Lavandula angustifolia P. Mill. × Lavandula latifolia (L.f.) Medikus (Lamiaceae) is a plant widely cultivated for essential oil production in the South of France. Chemometric treatment by mid-infrared (MID-IR) spectroscopy data was assessed for the differentiation of Grosso Lavandin Essential Oils of Controlled Area (GLEOCA) and results were compared to those obtained by gas chromatography for MID-IR short time technique validation. The quantification of the main 13 hydrocarbons and oxygenated compounds generally controlled by industrial perfumers in GLEOCA samples (n = 83) of three geographic origins: “Simiane”, “Puimoisson” (with two producers) and “Richerenches” and their classification were successfully obtained by partial least square discriminant analysis (PLS-DA) by comparison with gas chromatography. The best prediction results were obtained using first derivate spectral data in the 1800-700 cm⁻¹ range. The spectroscopic interpretation of regression vectors showed that each geographic origin was correlated to components of GLEOCA. Chemometric MID-IR spectra treatments allowed us to obtain similar results than those obtained by time consuming analytical techniques such as GC and therefore constitute a robust and help fast method for authentication of GLEOCA and should be extended to other essential oils for authentication of geographic origin.     

Spermine-graft-dextran non-covalent copolymer as coating material in separation of basic proteins and neurotransmitters by capillary electrophoresis

Spermine-graft-dextran (Spe-g-Dex) copolymer was synthesized and used as a non-covalent coating for the separation of proteins and neurotransmitters by capillary electrophoresis. The coating was obtained via flushing the capillary with 1.0% Spe-g-Dex copolymer solution for 2 min. Electroosmotic flow (EOF) was strongly suppressed, ranging from −1.60 × 10⁻⁹ to 3.65 × 10⁻⁹ m² V⁻¹ s⁻¹. Effect of experimental conditions, such as the copolymer concentration, the concentration and pH of the background electrolyte (BGE), on the Spe-g-Dex coating was investigated. Separation of lysozyme, cytochrome c, ribonuclease A and α-chymotrypsinogen yielded high separation efficiencies ranging from 141 000 to 303 000 plates/m and recoveries from 85.4% to 98.3% at pH 4.0 (284.0 mM sodium acetate–acetic acid buffer, I = 50 mM). Run-to-run repeatabilities and day-to-day, and capillary-to-capillary reproducibilities were all below 1.7%. In addition, Spe-g-Dex coating allowed the successful separation of five neurotransmitters, 5-hydroxytryptamine, dopamine, epinephrine, isoprenaline, dobuamine at pH 4.0 with high separation efficiencies of 290 000–449 000 plates/m.     

Microchip device for rapid screening and fingerprint identification of phenolic pollutants

A new microchip protocol has been developed for rapid measurements of the ‘total’ content of phenolic compounds, as well as for a detailed fingerprint identification of the ‘individual’ ones. The protocol involves the use of a microchip flow-injection analysis for fast screening and early detection of phenols and switching to the separation (fingerprint) mode once such compounds are detected. This is readily accomplished by exchanging the run buffers in the separation channel. While operating with an acidic run buffer (pH 5) offers high speed flow-injection measurements of the ‘total’ phenolic content, on chip switching to a basic buffer (pH 8) leads to ionization of the phenolic compounds and to their effective separation and detection. Under optimum conditions, assay rates of about 120 and 18 samples/h can be realized for the ‘total’ and ‘individual’ measurements, respectively. The effect of the buffer pH, switching (washing) time, applied voltages and other relevant variables, is described. The concept is illustrated in connection to amperometric detection and is attractive for a wide range of environmental-monitoring applications.     

A novel fiber-packed column for on-line preconcentration and speciation analysis of chromium in drinking water with flame atomic absorption spectrometry

A novel on-line preconcentration and determination system based on a fiber-packed column was developed for speciation analysis of Cr in drinking water samples prior to its determination by flame atomic absorption spectrometry (FAAS). All variables involved in the development of the preconcentration method including, pH, eluent type, sample and eluent flow rates, interfering effects, etc., were studied in order to achieve the best analytical performance. A preconcentration factor of 32 was obtained for Cr(VI) and Cr(III). The levels of Cr(III) species were calculated by difference of total Cr and Cr(VI) levels. Total Cr was determined after oxidation of Cr(III) to Cr(VI) with hydrogen peroxide. The calibration graph was linear with a correlation coefficient of 0.999 at levels near the detection limit and up to at least 50 μg L⁻¹. The relative standard deviation (R.S.D.) was 4.3% (C = 5 μg L⁻¹ Cr(VI), n = 10, sample volume = 25 mL). The limit of detection (LOD) for both Cr(III) and Cr(VI) species was 0.3 μg L⁻¹. Verification of the accuracy was carried out by the analysis of a standard reference material (NIST SRM 1643e “Trace elements in natural water”). The method was successfully applied to the determination of Cr(III) and Cr(VI) species in drinking water samples.     

Electrochemical approach for discriminating and measuring predominant flavonoids and phenolic acids using differential pulse voltammetry: towards an electrochemical index of natural antioxidants

This paper deals with possibilities of employing differential pulse voltammetry (DPV) at a glassy carbon electrode in the analytical characterization of natural phenolic antioxidants in samples containing phenolic classes such as cinnamic acids, flavan-3-ols, and flavonols. A selective electrochemical oxidation of predominant flavonoids at pH 7.5 and an electrochemical oxidation of the total phenolic acids and flavonoids at pH 2.0 was carried out. Our electrochemical approach, based on DPV, has proved to be an easy, fast, and reliable method for discriminating flavonoids and phenolic acids. It has also helped establish the relationship between their voltammetric behavior and their in vitro “antioxidant power”. The analytical possibilities of the proposed method have been explored using both, representative standards and real samples where the predominant flavonoid and phenolic acid classes are present in different concentrations. The new approach has also proved satisfactory for the study of apple and pear juices as well as fresh apples and pears in different matrices such as peels and pulps. In general terms, “high antioxidant power” was always related to predominant phenolic classes (acids and flavan-3-ols) while the “low antioxidant power” was a result of a contribution of predominant phenolics (flavan-3-ols) and fingerprint phenolics: phlorizdin and arbutin. Likewise, the proposed electrochemical strategy showed a satisfactory analytical performance. A reproducibility of oxidation potential (less 5%) as well as in the height of peaks and calibration slopes (with R.S.D.s ranging between 0.3 and 8.3%) were also obtained. Concomitantly, the newly proposed voltammetric method showed recoveries between 83.5 and 108.6%.     

Effect of cetyltrimethylammonium bromide on the migration of polyaromatic hydrocarbons in capillary electrokinetic chromatography

The separation of different ring numbered polyaromatic hydrocarbons (PAHs) was accomplished by using cetyltrimethylammonium bromide (CTAB) in capillary electrokinetic chromatography. In order to increase the solubilities and selectivities of PAHs, acetonitrile (ACN) was used as an organic modifier. Under the optimised conditions, 11 aromatic compounds were separated within 14.5 min in a running electrolyte containing 10 mM phosphate, 30 mM CTAB, and 40% ACN at pH 6.0. The effects of CTAB and ACN concentrations, voltage and pH on the resolution were investigated. Reproducibilities of migration times range between 0.55 and 1.27 R.S.D.% and peak areas between 1.02 and 7.23 R.S.D.%. Limit of detections (LODs) range between 0.09 and 2.24 μg ml⁻¹. This new and fast separation method of PAHs was applied to cooked oil sample.     

Worldwide interlaboratory study on the determination of ochratoxin A in different wine type samples

Interlaboratory studies are decisive tools to help the validation of a specific analytical methodology or to assess the reproducibility of the use of different methods to analyze a given compound or compounds in certain sample matrices. In this work, homogeneous samples of two white wines (“White Wine” and “White Liqueur Wine”) and one red wine (“Red Fortified Wine”) from Portugal with different production techniques and characteristics, namely in alcohol strength (10.5%, 16.0% and 19.0% ethanolic content, respectively), were analyzed for their contents in ochratoxin A (OTA), a mycotoxin generated from fungal contamination. White Liqueur Wine was naturally contaminated, whereas the other two wine type were spiked with ethanolic OTA solutions. The participation of 24 laboratories from 17 countries of five continents was ensured for this study. Although with no restrictions in terms of analytical methodology to employ, 75% of the laboratories resorted to immunoaffinity columns clean-up followed by high performance liquid chromatography with fluorescence detection (HPLC-FD), most of them in accordance with the European Standard EN 14133. For White Wine samples, the general mean OTA concentration was 1.96 μg/l (two outliers) with interlaboratorial standard deviation (s_L) of 0.53 μg/l; for White Liqueur Wine, mean of 1.59 μg/l (one outlier), with s_L = 0.59 μg/l; and for Red Fortified Wine, mean of 2.73 μg/l (no outliers), with s_L = 0.96 μg/l. Outliers were determined by Cochran and Grubbs tests. The Horrat index, recommended by the Association of Official Analytical Chemists (AOAC) for the quality assurance of the collaborative study was, on average, 1.7. This study proved that OTA determination in wines is reproducible, regardless of the methodology employed.     

Determination of trace and major elemental profiles in street dust samples by fast miniaturized ultrasonic probe extraction and ICP-MS

A simple, fast and miniaturized ultrasonic probe assisted protocol for acid extraction of trace and major elements from street dust samples, prior to final determination by ICP-MS, has been optimized and validated by standard reference materials and applied during an urban air quality monitoring campaign. 15 mg samples were treated for 3 min with 1 mL concentrated HNO₃-HCl (1:3, v/v) extracting solution, by a 1 mm diameter titanium sonotrode connected to a 200 W and 24 kHz ultrasonic device at 80% amplitude. After centrifugation, the extracts were assayed by ICP-MS with good recoveries for the certified elements. Statistical analysis of real sample results by cluster analysis allowed the correct grouping of the samples according to the influence of traffic and construction/demolition activities. Correlation of street dust and PM10 elemental profiles showed the potential applicability of the proposed analytical protocol as a simple and effective way for urban air quality monitoring.     

Ultraviolet absorbance detection of colchicine and related alkaloids on a capillary electrophoresis microchip

The separation and UV absorbance detection of four toxic alkaloids, colchicine, thiocolchicine, colchicoside, and thiocolchicoside, on a microchip-based capillary electrophoresis device are reported. To increase the sensitivity of UV absorbance detection, optical cells with extended path lengths were integrated into the separation channel during the microfabrication process. The absorbance values realized on the microchip using these optical cells were proportional to the increase in average depths according to the Beer-Lambert Law, resulting in sensitivity enhancements by as much as five times. Linearity of response was observed from 5.0 to 500 mg L⁻¹ of colchicine, with detection limits ranging from 2 to 6 mg L⁻¹ depending upon the specific alkaloid and the dimension of the optical cell. The extraction of colchicine from spiked milk samples was performed and an average recovery rate of 83% with a relative standard deviation of 3.8% was determined using the optimized conditions on the microchip.     

High-sensitivity microchip electrophoresis determination of inorganic anions and oxalate in atmospheric aerosols with adjustable selectivity and conductivity detection

A sensitive and selective separation of common anionic constituents of atmospheric aerosols, sulfate, nitrate, chloride, and oxalate, is presented using microchip electrophoresis. The optimized separation is achieved in under 1 min and at low background electrolyte ionic strength (2.9 mM) by combining a metal-binding electrolyte anion (17 mM picolinic acid), a sulfate-binding electrolyte cation (19 mM HEPBS), a zwitterionic surfactant with affinity towards weakly solvated anions (19 mM N-tetradecyl,N,N-dimethyl-3-ammonio-1-propansulfonate), and operation in counter-electroosmotic flow (EOF) mode. The separation is performed at pH 4.7, permitting pH manipulation of oxalate's mobility. The majority of low-concentration organic acids are not observed at these conditions, allowing for rapid subsequent injections without the presence of interfering peaks. Because the mobilities of sulfate, nitrate, and oxalate are independently controlled, other minor constituents of aerosols can be analyzed, including nitrite, fluoride, and formate if desired using similar separation conditions. Contact conductivity detection is utilized, and the limit of detection for oxalate (S/N = 3) is 180 nM without stacking. Sensitivity can be increased with field-amplified sample stacking by injecting from dilute electrolyte with a detection limit of 19 nM achieved. The high-sensitivity, counter-EOF operation, and short analysis time make this separation well-suited to continuous online monitoring of aerosol composition.