Axisymmetric free vibrations of infinite thermoelastic plate

The propagation of axisymmetric free vibrations in an infinite homogeneous isotropic micropolar thermoelastic plate without energy dissipation subjected to stress free and rigidly fixed boundary conditions is investigated. The secular equations for homogeneous isotropic micropolar thermoelastic plate without energy dissipation in closed form for symmetric and skew symmetric wave modes of propagation are derived. The different regions of secular equations are obtained. At short wavelength limits, the secular equations for symmetric and skew symmetric modes of wave propagation in a stress free insulated and isothermal plate reduce to Rayleigh surface wave frequency equation. The results for thermoelastic, micropolar elastic and elastic materials are obtained as particular cases from the derived secular equations. The amplitudes of displacement components, microrotation and temperature distribution are also computed during the symmetric and skew symmetric motion of the plate. The dispersion curves for symmetric and skew symmetric modes and amplitudes of displacement components, microrotation and temperature distribution in case of fundamental symmetric and skew symmetric modes are presented graphically. The analytical and numerical results are found to be in close agreement.     

Axisymmetric free vibrations of infinite micropolar thermoelastic plate

The propagation of axisymmetric free vibrations in an infinite homogeneous isotropic micropolar thermoelastic plate without energy dissipation subjected to stress free and rigidly fixed boundary conditions is investigated. The secular equations for homogeneous isotropic micropolar thermoelastic plate without energy dissipation in closed form for symmetric and skew symmetric wave modes of propagation are derived. The different regions of secular equations are obtained. At short wavelength limits, the secular equations for symmetric and skew symmetric modes of wave propagation in a stress free insulated and isothermal plate reduce to Rayleigh surface wave frequency equation. The results for thermoelastic, micropolar elastic and elastic materials are obtained as particular cases from the derived secular equations. The amplitudes of displacement components, microrotation and temperature distribution are also computed during the symmetric and skew symmetric motion of the plate. The dispersion curves for symmetric and skew symmetric modes and amplitudes of displacement components, microrotation and temperature distribution in case of fundamental symmetric and skew symmetric modes are presented graphically. The analytical and numerical results are found to be in close agreement.     

Rayleigh waves in an isotropic elastic half-space coated by a thin isotropic elastic layer with smooth contact

In the present paper, we are interested in the propagation of Rayleigh waves in an isotropic elastic half-space coated with a thin isotropic elastic layer. The contact between the layer and the half space is assumed to be smooth. The main purpose of the paper is to establish an approximate secular equation of the wave. By using the effective boundary condition method, an approximate, yet highly accurate secular equation of fourth-order in terms of the dimensionless thickness of the layer is derived. From the secular equation obtained, an approximate formula of third-order for the velocity of Rayleigh waves is established. The approximate secular equation and the formula for the velocity obtained in this paper are potentially useful in many practical applications.     

Effect of relaxation times on circular crested waves in thermoelastic diffusive plate

The propagation of circularly crested thermoelastic diffusive waves in an infinite homogeneous transversely isotropic plate subjected to stress free, isothermal/insulated and chemical potential conditions is investigated in the framework of different thermo- elastic diffusion theories. The dispersion equations of thermoelastic diffusive Lamb type waves are derived. Some special cases of the dispersion equations are also deduced.     

Non-axisymmetrical vibration of elastic circular plate on layered transversely isotropic saturated ground

The non-axisymmetrical vibration of elastic circular plate resting on a layered transversely isotropic saturated ground was studied.First,the 3-d dynamic equations in cylindrical coordinate for transversely isotropic saturated soils were transformed into a group of governing differential equations with 1-order by the technique of Fourier ex- panding with respect to azimuth,and the state equation is established by Hankel integral transform method,furthermore the transfer matrixes within layered media are derived based on the solutions of the state equation.Secondly,by the transfer matrixes,the general solutions of dynamic response for layered transversely isotropic saturated ground excited by an arbitrary harmonic force were established under the boundary conditions, drainage conditions on the surface of.ground as well as the contact conditions.Thirdly, the problem was led to a pair of dual integral equations describing the mixed boundary- value problem which can be reduced to the Fredholm integral equations of the second kind solved by numerical procedure easily.At the end of this paper,a numerical result concerning vertical and radical displacements both the surface of saturated ground and plate is evaluated.     

Absorbing boundary conditions for elastic waves in transversely isotropic media

In the numerical simulation of elastic wave propagation in the solid, it is essential to introduce absorbing boundary conditions to limit the large or unbounded domain of computation. In this paper, the absorbing boundaries for transversely isotropic media are composed of simple first-order partial differential operators, and each of the operators can perfectly absorb a plane wave outgoing at a certain angle. To test the absorbing ability, the reflection coefficient formulas for the quasi-P and quasi-S wave on the absorbing boundary are derived based on the potential functions theory of the elastic wave. Numerical examples show that the absorbing effect is good. The boundary conditions given here have a practical meaning.Supported by National Natural Science Foundation of China.     

On the strong ellipticity for orthotropic micropolar elastic bodies in a plane strain state

In the present paper we consider an orthotropic micropolar elastic material subject to a state of plane strain. In this context, we establish necessary and sufficient conditions for the strong ellipticity of constitutive coefficients. Furthermore, we study existence of progressive plane waves under the strong ellipticity conditions previously determined. Finally, we detail the results obtained for a specific class of materials related to tetragonal systems.     

Diffraction of discontinuous waves by ellipsoidal interfaces of transversely isotropic elastic media

Discontinuous waves penetrating the interfaces of transversely isotropic elastic media are studied using the ray-path method. The cases where such waves interact with curvilinear reflectors and with biconvex and biconcave lenses are considered. It is shown that discontinuous waves can focus or scatter depending on the physical properties and sequence of the media under consideration.Translated from Prikladnaya Mekhanika, Vol. 40, No. 10, pp. 98–106, October 2004.     

Dynamic interaction between elastic thick circular plate and transversely isotropic saturated soil ground

IntroductionThe vibration of the plate on the porous saturated building foundation is a complicateddynamic contact problem.Its consideration is very important in both earthquake and geo-technical engineering.Lots of research works have been done in recent…     

Behavior of a floating elastic plate during vibrations of a bottom segment

The Wiener-Hopf technique is used to obtain an analytical solution for the problem of vibrations of a floating semi-infinite elastic plate due to earthquake-induced vibrations of a bottom segment. An explicit solution is obtained ignoring the inertial term. The surface-wave amplitudes and ice-plate deflection are studied numerically as functions of the frequency and position of the vibrating bottom segment, ice thickness, and fluid depth.Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 2, pp. 98–108, March–April, 2005.     

Three-dimensional elastostatic solutions for transversely isotropic functionally graded material plates containing elastic inclusion

Based on the generalized England-Spencer plate theory, the equilibrium of a transversely isotropic functionally graded plate containing an elastic inclusion is studied. The general solutions of the governing equations are expressed by four analytic functions α(ζ), β(ζ), φ(ζ), and ψ(ζ) when no transverse forces are acting on the surfaces of the plate. Axisymmetric problems of a functionally graded circular plate and an infinite func-tionally graded plate containing a circular hole subject to loads applied on the cylindrical boundaries of the plate are firstly investigated. On this basis, the three-dimensional (3D) elasticity solutions are then obtained for a functionally graded infinite plate containing an elastic circular inclusion. When the material is degenerated into the homogeneous one, the present elasticity solutions are exactly the same as the ones obtained based on the plane stress elasticity, thus validating the present analysis in a certain sense.     

Propagation of elastic waves in water-saturated soils

A brief review of the literatures on the titled subject is given. A set of wave equations, taking the inertial coupling effect between soil skeleton and pore water into account, are established for saturated soils. The preliminary analysis shows that the nature of wave propagation is mainly influenced by permeability coefficient,k. There are three types of waves, two (P-and S-wave) propagating through soil skeleton and one(P-wave) through pore water. For a soil with large value ofk, compression wave velocity through pore water will be greater than that through single-phased water, and ask→∞, the former could be times as great as the latter. For a soil with extremely low permeability, the compression wave velocity could be either less or greater than that through single-phased water, depending on the rigidity of the soil passing through. Some phenomena observed from tests presented in the literature may be reasonably explained by the proposed theory herein, and thus more reliable parameters of soil could be obtained from wave velocity measurements. Further studies on this subject are still needed. This paper is a part of the dissertation of the first author for the Ph.D. degree, the second author is his advisor.     

Rayleigh waves in orthotropic fluid-saturated porous media

In this paper, we are interested in the propagation of Rayleigh waves in orthotropic fluid-saturated porous media. This problem was investigated by Liu and Liu (2004). The authors have derived the secular equation of the wave but that secular equation is still in implicit form. The main aim of this paper is to derive explicit secular equation of the wave. By employing the method of polarization vector, the secular equations of Rayleigh waves in explicit form is obtained. This equation recovers the dispersion equation of Rayleigh waves propagating in pure orthotropic elastic half-spaces. Remarkably, the secular equation obtained is not a complex equation as the one derived by Liu and Liu, it is a really real equation.     

Water waves in an elastic vessel

Linear and nonlinear analyses of water waves in an elastic vessel are carried out to study the dramatic phenomena of Dragon Wash as well as related controllable experiments. It is proposed that the capillary edge waves are generated by parametric resonance, which is shown to be a possible mechanism for both rectangular an circular vessels. For circular vessel, the normal geometric resonance is also operating, thus greatly enhance the dramatic effect. The mechanism of nonlinear mode-mode interaction is proposed for the generation of axisymmetric low-frequency gravity waves by the high- frequency external excitation. A simple model system is studied numerically to demonstrate explicitly this interaction mechanism.     

Rayleigh waves with impedance boundary conditions in anisotropic solids

The paper is concerned with the propagation of Rayleigh waves in an elastic half-space with impedance boundary conditions. The half-space is assumed to be orthotropic and monoclinic with the symmetry plane _x3=0$x_3=0$. The main aim of the paper is to derive explicit secular equations of the wave. For the orthotropic case, the secular equation is obtained by employing the traditional approach. It is an irrational equation. From this equation, a new version of the secular equation for isotropic materials is derived. For the monoclinic case, the method of polarization vector is used for deriving the secular equation and it is an algebraic equation of eighth-order. When the impedance parameters vanish, this equation coincides with the secular equation of Rayleigh waves with traction-free boundary conditions.     

Modeling cylindrical waves in nonlinear elastic composites

A procedure of deriving nonlinear wave equations that describe the propagation and interaction of hyperelastic cylindrical waves in composite materials modeled by a mixture with two elastic constituents is outlined. Nonlinearity is introduced by metric coefficients, Cauchy-Green strain tensor, and Murnaghan potential. It is the quadratic nonlinearity of all governing relations. For a configuration (state) dependent on the radial coordinate and independent of the angular and axial coordinates, quadratically nonlinear wave equations for stresses are derived and a relationship between the components of the stress tensor and partial strain gradient is established. Four combinations of physical and geometrical nonlinearities in systems of wave equations are examined. Nonlinear wave equations are explicitly written for three of the combinations __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 6, pp. 63–72, June 2007.     

Propagation of Rayleigh waves on free surface of transversely isotropic generalized thermoelastic diffusion

The present paper is devoted to the study of Rayleigh wave propagation in a homogeneous, transversely isotropic, thermoelastic diffusive half-space, subject to stress free, thermally insulated/isothermal, and chemical potential boundary conditions in the context of the generalized thermoelastic diffusion theory. The Green-Lindsay（GL） theory is used in the study. In this theory, thermodiffusion and thermodiffusion mechanical relaxations are governed by four different time constants. Secular equations for surface wave propagation in the considered media are derived. Anisotropy and diffusion effects on the phase velocity, attenuation coefficient are graphically presented in order to present the analytical results and make comparison. Some special cases of frequency equations are derived from the present investigation.     

Solitary waves in initially stressed thin elastic tubes

In the present work, we study the propagation of non-linear waves in an initially stressed thin elastic tube filled with an inviscid fluid. Considering the physiological conditions of the arteries, in the analysis, the tube is assumed to be subjected to a uniform inner pressure P₀ and an axial stretch ratio λ_z. It is assumed that due to blood flow, a finite dynamical displacement field is superimposed on this static field and, then, the non-linear governing equations of the elastic tube are obtained. Using the reductive perturbation technique, the propagation of weakly non-linear waves in the longwave approximation is investigated. It is shown that the governing equations reduce to the Korteweg-deVries equation which admits a solitary wave solution. It is observed that the present model equations give two solitary wave solutions. The results are also discussed for some elastic materials existing in the literature.     

Theory of water waves in an elastic vessel

Recent experiments related to the Dragon Wash phenomena showed that axisymmetric capillary waves appear first from excitation, and circumferential capillary waves appear after increase of the excitation strength. Based on this new finding, a theory of parametric resonance is developed in detail to explain the on-set of the prominent circumferential capillary waves. Numerical computation is also carried out and the results agree generally with the experiments. Analysis and numerical computation are also presented to explain the generation of axisymmetric low-frequency gravity waves by the high-frequency external excitation.     

The effect of rotation and initial stress on the propagation of waves in a transversely isotropic elastic solid

In this paper the equations governing small amplitude motions in a rotating transversely isotropic initially stressed elastic solid are derived, both for compressible and incompressible linearly elastic materials. The equations are first applied to study the effects of initial stress and rotation on the speed of homogeneous plane waves propagating in a configuration with uniform initial stress. The general forms of the constitutive law, stresses and the elasticity tensor are derived within the finite deformation context and then summarized for the considered transversely isotropic material with initial stress in terms of invariants, following which they are specialized for linear elastic response and, for an incompressible material, to the case of plane strain, which involves considerable simplification. The equations for two-dimensional motions in the considered plane are then applied to the study of Rayleigh waves in a rotating half-space with the initial stress parallel to its boundary and the preferred direction of transverse isotropy either parallel to or normal to the boundary within the sagittal plane. The secular equation governing the wave speed is then derived for a general strain–energy function in the plane strain specialization, which involves only two material parameters. The results are illustrated graphically, first by showing how the wave speed depends on the material parameters and the rotation without specifying the constitutive law and, second, for a simple material model to highlight the effects of the rotation and initial stress on the surface wave speed.