The effect of aqueous solvation upon alpha-helix formation for polyalanines

The incremental free energies of aqueous solution for acetyl(ala)NNH2 in its extended unfolded and alpha-helical conformations are compared using the SM5.2 solvation method of Cramer and Truhlar. A combination of density functional theory (DFT) at the B3LYP/D95(d,p) and AM1 has been employed using the ONIOM method. The incremental solvation energies of alpha-helical structures are very similar for both ONIOM and AM1 optimized structures as these structures do not significantly change upon solution. However, the conformations of the unfolded peptides change from extended beta-strand to polyproline II conformations upon aqueous solution. The incremental solvation free energy per residue of the polyproline II structure is about 2 kcal/mol/residue greater than that for the alpha-helix, representing an upper limit for the difference between the solvation energies. However, most of this difference disappears when the energy required to distort the optimized gas-phase extended beta-strand structure to the optimized polyproline II solution structure is included in the analysis, leaving an estimated difference in incremental solvation free energy of 0.3-0.5 kcal/mol favoring the unfolded structure. The solution structure sacrifices the stability derived from the intramolecular C5 H-bonds for more favorable interactions with the aqueous solvent.     

H-bonding cooperativity and energetics of alpha-helix formation of five 17-amino acid peptides

Five peptides, each containing 17 amino acids, have been completely geometrically optimized in their alpha-helical and beta-strand forms using a mixed DFT/AM1 procedure. B3LYP/D95** was used for the entire helical structures, while AM1 was initially used to optimize the side chains, followed by reoptimization at the DFT level. The energetic and structural results show (1) that the helices are favored over the strands by 29.5 to 37.4 kcal/mol; (2) that alkyl groups on the amino acid side chains favor helix formation even in the absence of solvent; (3) that C-H...O hydrogen bonds contribute to the relative stability of the helices that contain amino acids (val, leu and ile) with beta-hydrogens in their alkyl side chains; (4) that formation of these helices entails approximately 6.6 kcal/mol of strain within the backbone per hydrogen bond; and (5) that H-bond cooperativity is essential for the alpha-helix to become more stable than a corresponding beta-strand. This last observation strongly suggests that pairwise potentials are inadequate for modeling of peptides and proteins.     

The energetic and structural effects of single amino acid substitutions upon capped alpha-helical peptides containing 17 amino acid residues. An ONIOM DFT/AM1 study

We evaluate the effect of the amino acid mutations of glycine, leucine, valine, phenylalanine, serine, and proline for the 10th alanine in the capped peptide, acetly(Ala)(17)NH(2), upon the energies of the alpha-helices and beta-strands using ONIOM DFT/AM1 molecular orbital calculations. The relative stabilities of the alpha-helix (to the beta-strand) derive from the differences between the effects upon not only the helix but the strand as well. Thus, Ala --> Pro significantly destabilizes both but destabilizes the alpha-helix more, while Ala --> Gly stabilizes both but stabilizes the beta-strand more. The theoretical results are discussed in the context of the known experimental reports. We suggest that the solvation of the unfolded state drives the helix/coil equilibrium in solution.     

Single-site mutation and secondary structure stability: an isodesmic reaction approach. The case of unnatural amino acid mutagenesis Ala-->Lac

A method is described to evaluate backbone interactions in proteins via computational unnatural amino acid mutagenesis. Several N-acetyl polyalanyl amides (AcA(n)NH(2)) were optimized in the representative helical (3(10)-, 4(13)-, and a "hybrid" kappa-helix, n = 7, 9, 10, 14) and hairpin (two- and three-stranded antiparallel beta-sheets with type I turns betaalphaalphaepsilon, n = 6, 9, 10) conformations, and extended conformers of N-acetyl polyalanyl methylamides (n = 2, 3) were used to derive multistranded beta-sheet fragments. Subsequently, each residue of every model structure was substituted, one at a time, with l-lactic acid. The resulting mutant structures were again optimized, and group-transfer energies DeltaE(GT) were obtained as heats of the isodesmic reactions: AcA(n)NHR + AcOMe --> AcA(x)LacA(y)NHR + AcNHMe (R = H, CH(3)). These group-transfer energies correlate with the degree of charge polarization of the substituted peptide linkages as measured by the difference Deltae in H and O Mulliken populations in HN-C=O and with the H-bond distances in the "wild-type" structures. A good correlation obtains for the HF/3-21G and B3LYP/6-31G* group-transfer energies. The destabilization effects are interpreted in terms of loss of interstrand and intrastrand H-bonds, decrease in Lewis basicity of the C=O group, and O...O repulsion. On the basis of several comparisons of Ala --> Lac DeltaE(GT)'s with heats of the NH --> CH(2) substitutions, the latter contribution is estimated (B3LYP/6-31G*) to range between 1.5 and 2.4 kcal mol(-1), a figure close to the recent experimental DeltaDeltaG(o) value of 2.6 kcal mol(-1) (McComas, C. C.; Crowley, B. M.; Boger, D. L. J. Am.Chem. Soc. 2003, 125, 9314). The partitioning yields the following maximum values of the electronic association energy of H-bonds in the examined sample of model structures (B3LYP/6-31G* estimates): 3(10)-helix D(e) = -1.7 kcal mol(-1), alpha-helix D(e) = -3.8 kcal mol(-1), beta-sheet D(e) = -6.1 kcal mol(-1). The premise of experimental evaluations of the backbone-backbone H-bonding that Ala --> Lac substitution in proteins is isosteric (e.g., Koh, J. T.; Cornish, V. W.; Schultz, P. G. Biochemistry 1997, 36, 11314) is often but not always corroborated. Examination of the integrity of H-bonding pattern and phi(i), psi(i) distribution identified several mutants with significant distortions of the "wild-type" structure resulting inter alia from the transitions between i, i + 3 and i, i + 4 H-bonding in helices, observed previously in the crystallographic studies of depsipeptides (Ohyama, T.; Oku, H.; Hiroki, A.; Maekawa, Y.; Yoshida, M.; Katakai, R. Biopolymers 2000, 54, 375; Karle, I. L.; Das, C.; Balaram, P. Biopolymers 2001, 59, 276). Thus, the isodesmic reaction approach provides a simple way to gauge how conformation of the polypeptide chain and dimensions of the H-bonding network affect the strength of backbone-backbone C=O...HN bonds. The results indicate that the stabilization provided by such interactions increases on going from 3(10)-helix to alpha-helix to beta-sheet.     

Arene-cation interactions of positive quadrupole moment aromatics and arene-anion interactions of negative quadrupole moment aromatics

Intermolecular interactions involving aromatic pi-electron density are widely believed to be governed by the aromatic molecular quadrupole moment, Theta(zz). Arene-cation binding is believed to occur primarily with negative Theta(zz) aromatics, and arene-anion binding is believed to occur largely with positive Theta(zz) aromatics. We have performed quantum mechanical computations that show the cation binding of positive Theta(zz) aromatics and the anion binding of negative Theta(zz) aromatics is quite common in the gas phase. The pi-electron density of hexafluorobenzene, the prototypical positive Theta(zz ) aromatic (experimental Theta(zz) = 9.5 +/- 0.5 DA), has a Li+ binding enthalpy of -4.37 kcal/mol at the MP2(full)/6-311G**level of theory. The RHF/6-311G** calculated Theta(zz) value of 1,4-dicyanobenzene is +11.81 DA, yet it has an MP2(full)/6-311G** Li+ binding enthalpy of -12.65 kcal/mol and a Na+ binding enthalpy of -3.72 kcal/mol. The pi-electron density of benzene, the prototypical negative Theta(zz) aromatic (experimental Theta(zz) = -8.7 +/- 0.5 DA), has a F- binding enthalpy of -5.51 kcal/mol. The RHF/6-311G** calculated Theta(zz) of C6H2I4 is -10.45 DA, yet it has an MP2(full)/6-311++G** calculated F- binding enthalpy of -20.13 kcal/mol. Our results show that as the aromatic Theta(zz) value increases the cation binding enthalpy decreases; a plot of cation binding enthalpies versus aromatic Theta(zz) gives a line of best of fit with R2 = 0.778. No such correlation exists between the aromatic Theta(zz) value and the anion binding enthalpy; the line of best fit has R2 = 0.297. These results are discussed in terms of electrostatic and polarizability contributions to the overall binding enthalpies.     

Mechanism of the hydration of carbon dioxide: direct participation of H2O versus microsolvation

Thermochemical parameters of carbonic acid and the stationary points on the neutral hydration pathways of carbon dioxide, CO 2 + nH 2O --> H 2CO 3 + ( n - 1)H 2O, with n = 1, 2, 3, and 4, were calculated using geometries optimized at the MP2/aug-cc-pVTZ level. Coupled-cluster theory (CCSD(T)) energies were extrapolated to the complete basis set limit in most cases and then used to evaluate heats of formation. A high energy barrier of approximately 50 kcal/mol was predicted for the addition of one water molecule to CO 2 ( n = 1). This barrier is lowered in cyclic H-bonded systems of CO 2 with water dimer and water trimer in which preassociation complexes are formed with binding energies of approximately 7 and 15 kcal/mol, respectively. For n = 2, a trimeric six-member cyclic transition state has an energy barrier of approximately 33 (gas phase) and a free energy barrier of approximately 31 (in a continuum solvent model of water at 298 K) kcal/mol, relative to the precomplex. For n = 3, two reactive pathways are possible with the first having all three water molecules involved in hydrogen transfer via an eight-member cycle, and in the second, the third water molecule is not directly involved in the hydrogen transfer but solvates the n = 2 transition state. In the gas phase, the two transition states have comparable energies of approximately 15 kcal/mol relative to separated reactants. The first path is favored over in aqueous solution by approximately 5 kcal/mol in free energy due to the formation of a structure resembling a (HCO 3 (-)/H 3OH 2O (+)) ion pair. Bulk solvation reduces the free energy barrier of the first path by approximately 10 kcal/mol for a free energy barrier of approximately 22 kcal/mol for the (CO 2 + 3H 2O) aq reaction. For n = 4, the transition state, in which a three-water chain takes part in the hydrogen transfer while the fourth water microsolvates the cluster, is energetically more favored than transition states incorporating two or four active water molecules. An energy barrier of approximately 20 (gas phase) and a free energy barrier of approximately 19 (in water) kcal/mol were derived for the CO 2 + 4H 2O reaction, and again formation of an ion pair is important. The calculated results confirm the crucial role of direct participation of three water molecules ( n = 3) in the eight-member cyclic TS for the CO 2 hydration reaction. Carbonic acid and its water complexes are consistently higher in energy (by approximately 6-7 kcal/mol) than the corresponding CO 2 complexes and can undergo more facile water-assisted dehydration processes.     

Calorimetrically measurable enthalpic isotope effect

Calorimetric techniques have revealed that the enthalpy of reaction with water is more exothermic by about 2.2 kcal/mol, for the perdeuteriated naphthalene anion radical (K+C10D8*-(s) + H2O(liq) --> 1/2C10D8H2(s) + 1/2C10D8(s) + KOH(aq)) than it is for the perprotiated system. These results, when coupled with the known enthalpy of electron transfer between naphthalene and its perdeuteriated analogue imply that the heat of hydrogenation of naphthalene decreases by about 1.8 kcal/mol upon perdeuteriation of the naphthalene.     

Transition states for the dimerization of 1,3-cyclohexadiene: a DFT, CASPT2, and CBS-QB3 quantum mechanical investigation

Quantum mechanical calculations using restricted and unrestricted B3LYP density functional theory, CASPT2, and CBS-QB3 methods for the dimerization of 1,3-cyclohexadiene (1) reveal several highly competitive concerted and stepwise reaction pathways leading to [4 + 2] and [2 + 2] cycloadducts, as well as a novel [6 + 4] ene product. The transition state for endo-[4 + 2] cycloaddition (endo-2TS, DeltaH(double dagger)(B3LYP(0K)) = 28.7 kcal/mol and DeltaH(double dagger)(CBS-QB3(0K)) = 19.0 kcal/mol) is not bis-pericyclic, leading to nondegenerate primary and secondary orbital interactions. However, the C(s) symmetric second-order saddle point on the B3LYP energy surface is only 0.3 kcal/mol above endo-2TS. The activation enthalpy for the concerted exo-[4 + 2] cycloaddition (exo-2TS, DeltaH(double dagger)(B3LYP(0K)) = 30.1 kcal/mol and DeltaH(double dagger)(CBS-QB3(0K)) = 21.1 kcal/mol) is 1.4 kcal/mol higher than that of the endo transition state. Stepwise pathways involving diallyl radicals are formed via two different C-C forming transition states (rac-5TS and meso-5TS) and are predicted to be competitive with the concerted cycloaddition. Transition states were located for cyclization from intermediate rac-5 leading to the endo-[4 + 2] (endo-2) and exo-[2 + 2] (anti-3) cycloadducts. Only the endo-[2 + 2] (syn-3) transition state was located for cyclization of intermediate meso-5. The novel [6 + 4] "concerted" ene transition state (threo-4TS, DeltaH(double dagger)(UB3LYP(0K)) = 28.3 kcal/mol) is found to be unstable with respect to an unrestricted calculation. This diradicaloid transition state closely resembles the cyclohexadiallyl radical rather than the linked cyclohexadienyl radical. Several [3,3] sigmatropic rearrangement transition states were also located and have activation enthalpies between 27 and 31 kcal/mol.     

Thermodynamic and ab initio analysis of the controversial enthalpy of formation of formaldehyde.

There are two values, -26.0 and -27.7 kcal mol(-1), that are routinely reported in literature evaluations for the standard enthalpy of formation, Delta(f) H(o)(298), of formaldehyde (CH(2)=O), where error limits are less than the difference in values. In this study, we summarize the reported literature for formaldehyde enthalpy values based on evaluated measurements and on computational studies. Using experimental reaction enthalpies for a series of reactions involving formaldehyde, in conjunction with known enthalpies of formation, its enthalpy is determined to be -26.05+/-0.42 kcal mol(-1), which we believe is the most accurate enthalpy currently available. For the same reaction series, the reaction enthalpies are evaluated using six computational methods: CBS-Q, CBS-Q//B3, CBS-APNO, G2, G3, and G3B3 yield Delta(f) H(o)(298)=-25.90+/-1.17 kcal mol(-1), which is in good agreement to our experimentally derived result. Furthermore, the computational chemistry methods G3, G3MP2B3, CCSD/6-311+G(2df,p)//B3LYP/6-31G(d), CCSD(T)/6-311+G(2df,p)//B3LYP/6-31G(d), and CBS-APNO in conjunction with isodesmic and homodesmic reactions are used to determine Delta(f) H(o)(298). Results from a series of five work reactions at the higher levels of calculation are -26.30+/-0.39 kcal mol(-1) with G3, -26.45+/-0.38 kcal mol(-1) with G3MP2B3, -26.09+/-0.37 kcal mol(-1) with CBS-APNO, -26.19+/-0.48 kcal mol(-1) with CCSD, and -26.16+/-0.58 kcal mol(-1) with CCSD(T). Results from heat of atomization calculations using seven accurate ab initio methods yields an enthalpy value of -26.82+/-0.99 kcal mol(-1). The results using isodesmic reactions are found to give enthalpies more accurate than both other computational approaches and are of similar accuracy to atomization enthalpy calculations derived from computationally intensive W1 and CBS-APNO methods. Overall, our most accurate calculations provide an enthalpy of formation in the range of -26.2 to -26.7 kcal mol(-1), which is within computational error of the suggested experimental value. The relative merits of each of the three computational methods are discussed and depend upon the accuracy of experimental enthalpies of formation required in the calculations and the importance of systematic computational errors in the work reaction. Our results also calculate Delta(f) H(o)(298) for the formyl anion (HCO(-)) as 1.28+/-0.43 kcal mol(-1).     

Computational investigation of hydrogen abstraction from 2-aminoethanol by the 1,5-dideoxyribose-5-yl radical: a model study of a reaction occurring in the active site of ethanolamine ammonia lyase

Hydrogen abstraction from 2-aminoethanol by the 5'-deoxyadenosyl radical, which is formed upon Co--C bond homolysis in coenzyme B(12), was investigated by theoretical means with employment of the DFT (B3LYP) and ab initio (MP2) approaches. As a model system for the 5'-deoxyadenosyl moiety the computationally less demanding 1,5-dideoxyribose was employed; two conformers, which differ in ring conformation (C2- and C3-endo), were considered. If hydrogen is abstracted from "free" substrate by the C2-endo conformer of the 1,5-dideoxyribose-5-yl radical, the activation enthalpy is 16.7 kcal mol(-1); with the C3-endo counterpart, the value is 17.3 kcal mol(-1). These energetic requirements are slightly above the activation enthalpy limit (15 kcal mol(-1)) determined experimentally for the rate-determining step of the sequence, that is, hydrogen delivery from 5'-deoxyadenosine to the product radical. The activation enthalpy is lower when the substrate interacts with at least one amino acid from the active site. According to the computations, when a His model system partially protonates the substrate the activation enthalpy is 4.5 kcal mol(-1) for the C3-endo conformer and 5.8 kcal mol(-1) for the C2-endo counterpart. As hydrogen abstraction from the fully as well as the partially protonated substrate is preceded by the formation of quite stable encounter complexes, the actual activation barriers are around 13-15 kcal mol(-1). A synergistic interaction of 2-aminoethanol with two amino acids where His partially protonates the NH(2) group and Asp partially deprotonates the OH group of the substrate results in an activation enthalpy of 12.4 kcal mol(-1) for the C3-endo conformer and 13.2 kcal mol(-1) for the C2-endo counterpart. However, if encounter complexes exist in the active site, the actual activation barriers are much higher (>25 kcal mol(-1)) than that reported for the rate-determining step. These findings together with previous computations suggest that the energetics of the initial hydrogen abstraction decrease with an interaction of the substrate with only a protonating auxiliary, but for the rearrangement of the radical the synergistic effects of two auxiliaries are essential to pull the barrier below the limit of 15 kcal mol(-1).     

Theoretical study of transition state structure and reaction enthalpy of the F + H2-->HF + H reaction by a diffusion quantum Monte Carlo approach

Ab initio calculations of transition state structure and reaction enthalpy of the F + H2-->HF + H reaction has been carried out by the fixed-node diffusion quantum Monte Carlo method in this study. The Monte Carlo sampling is based on the Ornstein-Uhlenbeck random walks guided by a trial wave function constructed from the floating spherical Gaussian orbitals and spherical Gaussian geminals. The Monte Carlo calculated barrier height of 1.09(16) kcal/mol is consistent with the experimental values, 0.86(10)/1.18(10) kcal/mol, and the calculated value from the multireference-type coupled-cluster (MRCC) calculation with the aug-cc-pVQZ(F)/cc-pVQZ(H) basis set, 1.11 kcal/mol. The Monte Carlo-based calculation also gives a similar value of the reaction enthalpy, -32.00(4) kcal/mol, compared with the experimental value, -32.06(17) kcal/mol, and the calculated value from a MRCC/aug-cc-pVQZ(F)/cc-pVQZ(H) calculation, -31.94 kcal/mol. This study clearly indicates a further application of the random-walk-based approach in the field of quantum chemical calculation.     

Energetic preferences for alpha,beta versus beta,gamma unsaturation

Density functional theory has been applied at the B3LYP/6-311+G(d,p)//B3LYP/6-31G(d) level to examine the energetics of alpha,beta- versus beta,gamma-unsaturation for some common organic functional groups. Specifically, the relative stabilities of allyl-X (H2C=CHCH2X) and 1-propenyl-X (H3CCH=CHX) isomers have been computed for X = methyl, vinyl, phenyl, formyl, acetyl, methoxy, methylthio, methylsulfinyl, methylsulfonyl, sulfamoyl, and methoxysulfonyl, and the results are compared to available experimental data. The intrinsic preference of 3 kcal/mol for the 1-propenyl isomer when X = CH3 is exceeded by 2-4 kcal/mol for first-row conjugating groups, but it is not met for the sulfur-containing groups. In particular, alpha,beta-unsaturation is favored by less than 1 kcal/mol for the sulfone and sulfonamide analogues, while it is preferred by 8 kcal/mol for the vinyl-substituted case. Detailed structural results and torsional energy profiles are also reported.     

A theoretical study on the origin of cooperativity in the formation of 3(10)- and alpha-helices.

By using a simple repeating unit method, we have conducted a theoretical study which delineates the preferences for beta-strand, 2(7)-ribbon, 3(10)-helix, and alpha-helix formation for a series of polyglycine models up to 14 amino acid residues (Ac-(Gly)(n), n = 0, 1, 2,., 14). Interactions among residues, which result in cooperativity, are clearly indicated by variations in calculated energies of the residues. Whereas no cooperativity is found in the formation of beta-strands and 2(7)-ribbons, there is a significant cooperativity in the formation of 3(10)- and alpha-helices, especially for the latter. In the case of alpha-helices, the 14th residue is more stable than the 3rd by about 3 kcal/mol. A good correlation between calculated residue energy and residue dipole moment was uncovered, indicating the importance of long-range electrostatic interactions to the cooperativity. The results of our calculations are compared with those of the AMBER and PM3 methods, and indicate that both methods, AMBER and PM3, need further development in the cooperative view of electrostatic interactions. The result should be of importance in providing insight into protein folding and formation of helical structures in a variety of polymeric compounds. This also suggests a strategy for the development of more consistent molecular mechanics force fields.     

The ozonolysis of acetylene--a quantum chemical investigation.

The ozonolysis of acetylene was investigated using CCSD(T), CASPT2, and B3LYP-DFT in connection with a 6-311+G(2d,2p) basis set. The reaction is initiated by the formation of a van der Waals complex followed by a [4pi + 2pi] cycloaddition between ozone and acetylene (activation enthalpy DeltaH(a)(298) = 9.6 kcal/mol; experiment, 10.2 kcal/mol), yielding 1,2,3-trioxolene, which rapidly opens to alpha-ketocarbonyl oxide 5. Alternatively, an O atom can be transferred from ozone to acetylene (DeltaH(a)(298) = 15.6 kcal/mol), thus leading to formyl carbene, which can rearrange to oxirene or ketene. The key compound in the ozonolysis of acetylene is 5 because it is the starting point for the isomerization to the corresponding dioxirane 19 (DeltaH(a)(298) = 16.9 kcal/mol), for the cyclization to trioxabicyclo[2.1.0]pentane 10 (DeltaH(a)(298) = 19.5 kcal/mol), for the formation of hydroperoxy ketene 15 (DeltaH(a)(298) = 20.6 kcal/mol), and for the rearrangement to dioxetanone 9 (DeltaH(a)(298) = 23.6 kcal/mol). Compounds 19, 10, 15, and 9 rearrange or decompose with barriers between 13 and 16 kcal/mol to yield as major products formanhydride, glyoxal, formaldehyde, formic acid, and (to a minor extent) glyoxylic acid. Hence, the ozonolysis of acetylene possesses a very complicated reaction mechanism that deserves intensive experimental studies.     

Active Thermochemical Tables: accurate enthalpy of formation of hydroperoxyl radical, HO2

Through the use of the Active Thermochemical Tables approach, the best currently available enthalpy of formation of HO2 has been obtained as delta(f)H(o)298 (HO2) = 2.94 +/- 0.06 kcal mol(-1) (3.64 +/- 0.06 kcal mol(-1) at 0 K). The related enthalpy of formation of the positive ion, HO2+, within the stationary electron convention is delta(f)H(o)298 (HO2+) = 264.71 +/- 0.14 kcal mol(-1) (265.41 +/- 0.14 kcal mol(-1) at 0 K), while that for the negative ion, HO2- (within the same convention), is delta(f)H(o)298 (HO2-) = -21.86 +/- 0.11 kcal mol(-1) (-21.22 +/- 0.11 kcal mol(-1) at 0 K). The related proton affinity of molecular oxygen is PA298(O2) = 100.98 +/- 0.14 kcal mol(-1) (99.81 +/- 0.14 kcal mol(-1) at 0 K), while the gas-phase acidity of H2O2 is delta(acid)G(o)298 (H2O2) = 369.08 +/- 0.11 kcal mol(-1), with the corresponding enthalpy of deprotonation of H2O2 of delta(acid)H(o)298 (H2O2) = 376.27 +/- 0.11 kcal mol(-1) (375.02 +/- 0.11 kcal mol(-1) at 0 K). In addition, a further improved enthalpy of formation of OH is briefly outlined, delta(f)H(o)298 (OH) = 8.93 +/- 0.03 kcal mol(-1) (8.87 +/- 0.03 kcal mol(-1) at 0 K), together with new and more accurate enthalpies of formation of NO, delta(f)H(o)298 (NO) = 21.76 +/- 0.02 kcal mol(-1) (21.64 +/- 0.02 kcal mol(-1) at 0 K) and NO2, delta(f)H(o)298 (NO2) = 8.12 +/- 0.02 kcal mol(-1) (8.79 +/- 0.02 kcal mol(-1) at 0 K), as well as H(2)O(2) in the gas phase, delta(f)H(o)298 (H2O2) = -32.45 +/- 0.04 kcal mol(-1) (-31.01 +/- 0.04 kcal mol(-1) at 0 K). The new thermochemistry of HO2, together with other arguments given in the present work, suggests that the previous equilibrium constant for NO + HO2 --> OH + NO2 was underestimated by a factor of approximately 2, implicating that the OH + NO2 rate was overestimated by the same factor. This point is experimentally explored in the companion paper of Srinivasan et al. (next paper in this issue).     

Structures, internal rotor potentials, and thermochemical properties for a series of nitrocarbonyls, nitroolefins, corresponding nitrites, and their carbon centered radicals

Structures, enthalpy (Δ(f)H°(298)), entropy (S°(T)), and heat capacity (C(p)(T)) are determined for a series of nitrocarbonyls, nitroolefins, corresponding nitrites, and their carbon centered radicals using the density functional B3LYP and composite CBS-QB3 calculations. Enthalpies of formation (Δ(f)H°(298)) are determined at the B3LYP/6-31G(d,p), B3LYP/6-31+G(2d,2p), and composite CBS-QB3 levels using several work reactions for each species. Entropy (S) and heat capacity (C(p)(T)) values from vibration, translational, and external rotational contributions are calculated using the rigid-rotor-harmonic-oscillator approximation based on the vibration frequencies and structures obtained from the density functional studies. Contribution to Δ(f)H(T), S, and C(p)(T) from the analysis on the internal rotors is included. Recommended values for enthalpies of formation of the most stable conformers of nitroacetone cc(═o)cno2, acetonitrite cc(═o)ono, nitroacetate cc(═o)no2, and acetyl nitrite cc(═o)ono are -51.6 kcal mol(-1), -51.3 kcal mol(-1), -45.4 kcal mol(-1), and -58.2 kcal mol(-1), respectively. The calculated Δ(f)H°(298) for nitroethylene c═cno2 is 7.6 kcal mol(-1) and for vinyl nitrite c═cono is 7.2 kcal mol(-1). We also found an unusual phenomena: an intramolecular transfer reaction (isomerization) with a low barrier (3.6 kcal mol(-1)) in the acetyl nitrite. The NO of the nitrite (R-ONO) in CH(3)C(═O')ONO moves to the C═O' oxygen in a motion of a stretching frequency and then a shift to the carbonyl oxygen (marked as O' for illustration purposes).     

Polar group enhanced gas-phase acidities of carboxylic acids: an investigation of intramolecular electrostatic interaction

We studied the effects of polar groups on the gas-phase acidities of carboxylic acids experimentally and computationally. In this connection, the gas-phase acidities (DeltaH(acid), the enthalpy of deprotonation, and DeltaG(acid), the deprotonation free energy) of borane-complexed methylaminoacetic acid ((CH(3))2N(BH(3))CH(2)CO(2)H) and methylthioacetic acid (CH(3)S(BH(3))CH(2)CO(2)H) were measured using the kinetic method in a flowing afterglow-triple quadrupole mass spectrometer. The values of DeltaH(acid) and DeltaG(acid) of (CH(3))2N(BH(3))CH(2)CO(2)H were determined to be 328.8 +/- 1.9 and 322.1 +/- 1.9 kcal/mol, and those of CH(3)S(BH(3))CH(2)CO(2)H were determined to be 325.8 +/- 1.9 and 319.2 +/- 1.9 kcal/mol, respectively. The theoretical enthalpies of deprotonation of (CH(3))2N(BH(3))CH(2)CO(2)H (329.2 kcal/mol) and CH(3)S(BH(3))CH(2)CO(2)H (325.5 kcal/mol) were calculated at the B3LYP/6-31+G(d) level of theory. The calculated enthalpies of deprotonation of N-oxide-acetic acid (CH(3)NOCH(2)CO(2)H, 329.4 kcal/mol) and S-oxide-acetic acid (CH(3)SOCH(2)CO(2)H, 328.6 kcal/mol) are comparable to the experimental results for borane-complexed methylamino- and methylthioacetic acids. The enthalpy of deprotonation of sulfone-acetic acid (CH(3)SO2CH(2)CO(2)H, 326.1 kcal/mol) is about 2 kcal/mol lower than the S-oxide-acetic acid. The calculated enthalpy of deprotonation of sulfoniumacetic acid, (CH(3))2S+CH(2)CO(2)H, is 243.0 kcal/mol. Compared to the corresponding reference molecules, CH(3)NHCH(2)CO(2)H and CH(3)SCH(2)CO(2)H, the dipolar group and the monopolar group substituted carboxylic acids are stronger acids by 11-14 and 97 kcal/mol, respectively. We correlated the changes of the acidity upon a polar group substitution to the electrostatic free energy within the carboxylate anion. The acidity enhancements in polar group substituted carboxylic acids are the results of the favorable electrostatic interactions between the polar group and the developing charge at the carboxyl group.     

Direct calculation of trans-hydrogen-bond 13C-15N 3-bond J-couplings in entire polyalanine alpha-helices. A density functional theory study

We present the first trans-H-bond 13C-15N 3-bond J couplings calculated from entire neutral and protonated alpha-helical polyalanines. The neutral helices considered are those of the capped peptides, acetyl(Ala)NNH2, where N = 8, 16, 17, and 18, while the protonated peptides are the uncapped (Ala)17 protonated at three different positions. The calculated J values correlate well with O...H distances and somewhat less well with N...O distances, particularly if the terminal H-bonds are eliminated from the correlation. The J values calculated using the entire helix are about 6% lower in magnitude than those recently reported for H-bonding chains whose geometries were extracted from the same helices. Aqueous solvation favors protonation of the alpha-helix on the terminal COOH. Experimental measurements of the trans-H-bond 13C-15N 3-bond J couplings in acidic solution should be interpreted with this context.     

Interaction of adenine adducts with thymine: a computational study

The existence of DNA adducts bring the danger of carcinogenesis because of mispairing with normal DNA bases. 1,N6-ethenoadenine adducts (epsilonA) and 1,N6-ethanoadenine adducts (EA) have been considered as DNA adducts to study the interaction with thymine, as DNA base. Several different stable conformers for each type of adenine adduct with thymine, [epsilonA(1)-T(I), epsilonA(2)-T(I), epsilonA(3)-T(I) and EA(1)-T(I), EA(2)-T(I), EA(3)-T(I)] and [epsilonA(1)-T(II), epsilonA(2)-T(II), epsilonA(3)-T(II) and EA(1)-T(II), EA(2)-T(II), EA(3)-T(II)], have been considered with regard to their interactions. The differences in their geometrical structures, energetic properties, and hydrogen-bonding strengths have also been compared with Watson-Crick adenine-thymine base pair (A-T). Single-point energy calculations at MP2/6-311++G** levels on B3LYP/6-31+G* optimized geometries have also been carried out to better estimate the hydrogen-bonding strengths. The basis set superposition error corrected hydrogen-bonding strength sequence at MP2/6-311++G**//B3LYP/6-31+G* for the most stable complexes is found to be EA(2)-T(I) (15.30 kcal/mol) > EA(1)-T(II) (14.98 kcal/mol) > EA(3)-T(II) (14.68 kcal/mol) > epsilonA(2)-T(I) (14.54 kcal/mol) > epsilonA(3)-T(II) (14.22 kcal/mol) > epsilonA(3)-T(II) (13.64 kcal/mol) > A-T (13.62 kcal/mol). The calculated reaction enthalpy value for epsilonA(2)-T(I) is 10.05 kcal/mol, which is the highest among the etheno adduct-thymine complexes and about 1.55 kcal/mol more than those obtained for Watson-Crick A-T base pair and the reaction enthalpy value for EA(1)- T(II) is 10.22 kcal/mol, which is highest among the ethano addcut-thymine complexes and about 1.72 kcal/mol more than those obtained for Watson-Crick A-T base pair. The aim of this research is to provide fundamental understanding of adenine adduct and thymine interaction at the molecular level and to aid in future experimental studies toward finding the possible cause of DNA damage.