Enhancing effect of DNA on chemiluminescence from the decomposition of hydrogen peroxide catalyzed by copper(II)

In the absence of any special luminescence reagent, emission of weak chemiluminescence has been observed during the decomposition of hydrogen peroxide catalyzed by copper(II) in basic aqueous solution. The intensity of the chemiluminescence was greatly enhanced by addition of DNA and was strongly dependent on DNA concentration. Based on these phenomena, a flow-injection chemiluminescence method was established for determination of DNA. The chemiluminescence intensity was linear with DNA concentration in the range 2×10^–7–1×10^–5 g L^–1 and the detection limit was 4.1×10^–8 g L^–1 (S/N=3). The relative standard deviation was less than 3.0% for 4×10^–7 g L^–1 DNA (n=11). The proposed method was satisfactorily applied for determination of DNA in synthetic samples. The possible mechanism of the CL reaction is discussed.     

Oxidation of caffeine with hydrogen peroxide catalyzed by metalloporphyrins

The biomimetic oxidation of caffeine with hydrogen peroxide using metalloporphyrins as catalysts, which are known to be good biomimetic models of cytochrome P450 enzymes, is investigated. The two manganese porphyrins tested, chloro[5,10,15,20-tetrakis(2,6-dichlorophenyl)porphyrinato]manganese(III), [Mn(TDCPP)Cl], and chloro [5,10,15,20-tetrakis(pentafluorophenyl)porphyrinato]manganese(III), [Mn(TPFPP)Cl], afford high conversions of caffeine for all substrate/catalyst molar ratios. Selectivity was found to be dependent on the catalyst employed, and a new spiro racemic compound is described and fully characterized in the solid state from X-ray diffraction studies.     

脯氨酸衍生的胺基吡啶四氮锰配合物催化双氧水参与的烯烃不对称环氧化反应（英文）

自然界中存在许多的金属酶,它们参与促进各种各样的氧化反应,例如羟化反应,环氧化反应等.金属酶催化的反应具有催化效率高、反应条件温和、选择性高等优点.受大自然中的金属酶结构及其性质的启发,人们提出了仿生催化氧化的理念,并开始对金属酶进行模拟,致力于发展清洁氧化的反应方式.在过去的几十年中,科学家们设计合成了一系列仿生金属配合物催化剂.例如,利用非手性的乙二胺骨架设计合成出四齿氮配体MEP(N,N'-dimethylN,N'-bis(2-pyridinylmethyl)ethane-1,2-diamine),将其制备成相应的铁配合物催化剂,该铁催化剂可以很好的实现脂肪族烯烃的环氧化,产率高达90%.2003年,Stack小组首次报道了利用手性N,N-二甲基环己二胺骨架衍生的四齿氮配体金属配合物Mn-MCP-(OTf)2(MCP=N,N-dimethyl-N,N-bis(2-pyridylmethyl)cyclohexane-trans-1,2-diamine)催化的不对称环氧化反应.该反应的对映选择性仅仅为10%.因此,发展新型手性四氮配体金属配合物,用于高产率、高对映选择性的不对称环氧化反应,值得进行深入研究.近年来发展的一些含手性二胺骨架的四齿氮配体,例如PDP(2-[[2-(1-(pyridin-2-ylmethyl)-pyrrolidin-2-yl)pyrrolidin-1-yl]methyl]pyridine),被应用到不对称环氧化反应中,但是其手性二胺骨架为联吡咯,价格昂贵,难以制备.这在很大程度上限制了其在不对称合成中的实际应用.因此,利用一些易于合成的手性二胺骨架,发展结构新颖、催化性能优良的四氮金属配合物,成为实现高效、高选择性不对称环氧化反应的关键.在之前的工作基础上,本文以简单易得、价格低廉的天然氨基酸——L-脯氨酸为起始原料,选取吡啶环和含取代基的吡啶环作为侧基氮供体,制备了三种手性四齿氮配体.随后,我们利用新发展的手性四齿氮配体,合成了相应的锰配合物,并且分别将其运用于烯烃不对称环氧化反应中,仔细评估了这些锰金属配合物的催化性能.建立了以0.2 mol%的锰配合物为催化剂,0.5当量的2,2-二甲基丁酸为添加剂,30%双氧水为氧化剂,反应温度为–30 oC,乙腈为溶剂的催化不对称环氧化反应体系.反应结果显示:该催化剂催化的不对称环氧化反应底物适用性广泛,其中苯乙烯、苯并吡喃、烯酰胺等化合物均可以被成功地转化为相应的环氧化物,得到中等至优异的对映选择性(产率最高可达95%,对映选择性最高可达99%).     

Catalytic decomposition of hydrogen peroxide by a flow-through self-regulating platinum black heater

A flow-through reactor where a fine platinized platinum wire (Pt black wire) runs through the entire length of the PTFE tube was fabricated for the rapid decomposition of hydrogen peroxide (H₂O₂) at concentrations up to 1 M. Since the Pt black wire is directly electrically heated and the exterior of the tubular reactor is well insulated, the energy efficiency of this heater reactor is excellent. The temperature coefficient of resistance of the wire is significant (3280±40 ppm/°C). This provides a means to ascertain the mean temperature by measuring the resistance of the wire. The concentration of residual H₂O₂ was determined by the hematin-catalyzed oxidation of nonfluorescent thiamine to fluorescent thiochrome by H₂O₂. Essentially, quantitative (99.997%) decomposition of 1 M H₂O₂ could be achieved at a mean reactor temperature of 108 °C from a neutral aqueous solution with a mean residence time of ∼270 s.     

Synthesis and characterization of insoluble cobalt(II), nickel(II), zinc(II) and palladium(II) Schiff base complexes: Heterogeneous catalysts for oxidation of sulfides with hydrogen peroxide

The condensation reaction of 1,2-bis(2′-aminophenoxy)benzene with 2-pyridinecarbaldehyde in a mole ratio of 1:2 gives a new Schiff base ligand (L). Four Schiff base complexes, CoL(NO₃)₂ (1), NiLCl₂ (2), ZnL(NO₃)₂ (3) and Pd₂LCl₄ (4) have been prepared by direct reaction of the ligand (L) and appropriate metal salts. The Schiff base ligand (L) has been characterized by IR, ¹H NMR and ¹³C NMR spectroscopy and elemental analysis. Also, all complexes have been characterized by IR and XRD spectroscopy techniques and elemental analysis. The synthesized complexes have very poor solubility in all polar and non-polar solvents such as: H₂O, MeOH, EtOH, CH₃CN, DMSO, DMF, CHCl₃, CH₂Cl₂, THF, etc; therefore, they have been used as heterogeneous catalysts. Catalytic performance of the complexes was studied in oxidation of thioanisole using hydrogen peroxide (H₂O₂) as the oxidant. Various factors including the reaction temperature, amount of oxidant and catalyst amount were optimized. The palladium Schiff base complex, Pd₂LCl₄ (4), shows better catalytic activity than other complexes. Therefore, the Pd(II) Schiff base complex has been used as a catalyst for oxidation of different sulfides to their corresponding sulfones in acetonitrile with hydrogen peroxide as the oxidant. The palladium Schiff base complex, Pd₂LCl₄ (4), has shown a very good recyclability, up to five times, without any appreciable decreases in catalytic activity and selectivity.     

Efficient epoxidation reaction of terminal olefins with hydrogen peroxide catalyzed by an iron (II) complex

A highly active iron (II) complex that catalyzed epoxidation of terminal olefins with hydrogen peroxide was described. The catalytic system displayed excellent catalytic ability for the selective oxidation of terminal olefins to epoxides with high selectivity (up to 97.8%) in CH₃CN at 25?°C. The catalytic activity of three similarly structural iron (II) complexes was comparatively studied. The effect of various auxiliary ligands on epoxidation was investigated in detail.     

Iron(II)-bis (salicyladimine) Schiff-base complexes catalyzed decomposition of hydrogen peroxide

The tetradentate Schiff-base ligands, N,N′-bis(salicylidene)-ethylenediamine (Salen), N,N′-bis(salicylidene) butylenediamine (Salbut), and N,N′-bis(salicylidene)-o–phenylenediamine, (sal-o-phen) are very strongly sorbed by cation exchange resin (Dowex-50W) with Fe²⁺ ions as a counter ion, forming stable complexes. The kinetics of the catalytic decomposition of H₂O₂ using these complexes was studied in ethanolic medium. The reaction was first-order with salen and sal-o-phen and second-order with salbut with respect to [H₂O₂]. The rate of the H₂O₂ decomposition increased either from salen to salbut or from salen to sal-o-phen. Also, the k (per g dry resin) values decreased with increasing both the particle size and the degree of resin cross-linkage. The active species formed at the beginning of the reaction, had an inhibiting effect on the reaction rate. The corresponding activation parameters were calculated from a least-squares fit of the temperature dependence of the rate constant. A reaction mechanism is proposed. © 1994 John Wiley & Sons, Inc.     

Kinetics of hydrogen peroxide decomposition catalyzed by Cu-buserite over a well-sealed and thermostated kinetics assembly

Herein a well-sealed and thermostated kinetics assembly is designed and built, which can run stirred at different reaction temperatures. With the reaction assembly above and the volumetric method together, the hydrogen peroxide (H₂O₂) decomposition reaction kinetics is systematically investigated under a variety of reaction conditions over a copper-doped buserite-type layer manganese oxide (referred to as Cu-buserite) as a heterogeneous catalyst. The overall second-order rate law is fitted out by the linear regression analysis, with the reaction orders with respect to both H₂O₂ and Cu-buserite determined to each be equal to 1, and then explicitly explained by the proposed Michaelis-Menten like mechanism. The apparent activation energy E_a is estimated as 33.5 ± 2.5 kJ mol⁻¹.     

Kinetic study of the decomposition of Prussian Blue electrocatalytic layer during cathodic reduction of hydrogen peroxide

Kinetic study on the decomposition of Prussian Blue electrocatalytic layer during electrochemical reduction of hydrogen peroxide has been studied in relation to biosensor application of this electrocatalyst. The decomposition has been shown to proceed as a nearly exponential decay process and the corresponding first-order rate coefficients were determined. It has been shown that the decomposition proceeds about 10 times faster in pH 7.3 buffer solution as compared to pH 5.5 buffer. A linear dependence of the decomposition rate on the concentration of hydrogen peroxide has been found.      

Biomimetic oxidation of metribuzin with hydrogen peroxide catalyzed by 5,10,15,20-tetraarylporphyrinatoiron(III) chlorides

The biomimetic oxidation of metribuzin, a pre- and post-emergence herbicide with hydrogen peroxide catalyzed by 5,10,15,20-tetraarylporphyrinatoiron(III) chlorides [TAPFe(III)Cl], has been studied yielding 6-t-butyl-3-methylthio-1,2,4-triazine-5(4H)-one, 4-amino-6-t-butyl-3,5(2H,4H)-dione and 6-t-butyl-1,2,4-triazin-3,5(2H,4H)-dione under various reaction conditions.     

氨基羧酸铁(III)配合物催化分解过氧化氢

用碘量法研究了[Fe（EDTA],[FeⅢ(DCTA)],[FeⅢ(EGTA)]催化分解H2O2反应，提出了反应动力学方程为-d[H2O2]/dt=k[FE(Ⅲ)][H2O2][H ]^-1，认为氨基羧酸铁（Ⅲ）配合物催化分解H2O2反应为键式自由基反应，反应中间体包括过氧铁（Ⅲ）配合物，氨基羧酸铁（Ⅱ）和HO-，HO2-自由基。     

Tantalum(V) or niobium(V) catalyzed oxidation of sulfides with 30% hydrogen peroxide

Tantalum(V) and niobium(V) are effective catalysts for the oxidation of sulfides with 30% hydrogen peroxide. The reaction of sulfides with 30% hydrogen peroxide catalyzed by tantalum(V) chloride or niobium(V) chloride in acetonitrile, i-propanol or t-butanol selectively provided the corresponding sulfoxides in high yields. The corresponding sulfones are efficiently obtained from the reaction of sulfides with 30% hydrogen peroxide in methanol catalyzed by tantalum(V) or niobium(V).     

Mn(II)-sodium dodecyl sulphate complex mimic enzyme-catalyzed fluorescence quenching of Pyronine B by hydrogen peroxide

Mn(II)-sodium dodecyl sulphate complex (Mn(II)-SDS) is used to mimic the active group of peroxidase. The catalytic characteristic of this mimic enzyme catalyst in the oxidation reaction of fluorescence substrate, tetraethyldiaminoxanthyl chloride (Pyronine B (PB)), with hydrogen peroxide has been studied. The experimental results show that Mn(II)-SDS complex has similar catalytic activity that of peroxidase. The steady-state catalytic rate depends upon mimic enzyme and substrate concentrations, and the Michaelis-Menten parameters K_m, V_max and K_cat are 7.6×10⁻⁶ M, 7.9×10⁻⁷ M s⁻¹ and 7.9 s⁻¹, respectively. The catalytic activity of Mn(II)-SDS complex is compared with those of HRP and Hemin. Though the catalytic activity of Mn(II)-SDS complex is 15.9% of that of HRP, it can catalyze the oxidation reaction of PB with hydrogen peroxide lead to fluorescence quenching of PB. Under optimum conditions, linear relationship between fluorescence quenching F₀/F and concentration of H₂O₂ is in the range of (0.0-3.6) × 10⁻⁷ M. The detection limit is determined to be 3.0×10⁻⁹ M. By coupling this mimic catalytic reaction with the catalytic reaction of glucose oxidase (GOD), glucose can be detected. Linear relationship between F₀/F and concentration of glucose is in the range of (0.0-1.4) × 10⁻⁷ M. The detection limit is determined to be 4.2×10⁻⁹ M. This method is applied to the determination of glucose in human serum and the results are in good agreement with the phenol-4-aminoantipyrine (4-AAP).     

Flow-injection determination of hydrogen peroxide based on fluorescence quenching of chromotropic acid catalyzed with Fe(II)

Flow-injection analysis system (FIA system), which was based on Fe(II)-catalyzed oxidation of chromotropic acid with hydrogen peroxide, was developed for the determination of hydrogen peroxide. The chromotropic acid has a fluorescence measured at λ_em = 440 nm (emission wavelength) with λ_ex = 235 nm (excitation wavelength), and the fluorescence intensity at λ_em = 440 nm quietly decreased in the presence of hydrogen peroxide and Fe(II), which was caused by Fe(II)-catalyzed oxidation of chromotropic acid with hydrogen peroxide. By measuring the difference of fluorescence intensity, hydrogen peroxide (1.0 × 10⁻⁸-1.0 × 10⁻³ mol L⁻¹) could be determined by the proposed FIA system, whose analytical throughput was 40 samples h⁻¹. The relative standard deviation (RSD) was 1.03% (n = 10) for 4.0 × 10⁻⁸ mol L⁻¹ hydrogen peroxide. The proposed FIA technique could be applied to the determination of hydrogen peroxide in rain water samples.     

Reaction between 7,8-dihydropterins and hydrogen peroxide under physiological conditions

In vitiligo, a common skin disorder that produces white patches of depigmentation, 7,8-dihydropterins accumulate in the presence of high concentration of H₂O₂. In this work, we present a study of the reaction between 7,8-dihydropterins and H₂O₂. The rate of the reaction, as well as the products formed, strongly depend on the chemical structure of the substituents. Electron-donor groups as substituents are the most reactive derivatives and undergo oxidation of the pterin moiety. The corresponding bimolecular rate constants at 37 °C in neutral aqueous solutions are reported. The biological implications of the results obtained are also discussed.     

Baeyer-Villiger oxidation of ketones with hydrogen peroxide catalyzed by Sn-aniline complex

Sn-aniline complex was prepared by a simple procedure.Cyclic and acyclic ketones were oxidized into lactones or esters with very high selectivity and yield with 30% hydrogen peroxide in the presence of Sn-aniline complex.     

Role of resin-manganese(II) complexes in hydrogen peroxide decomposition

The kinetics of hydrogen peroxide decomposition has been investigated in the presence of Wofatit KPS (4% DVB, 40–80 μm) resin in the form of mono (mea), di (dea), triethanolamine (tea), ethylenediamine (eda), and N,N′-diethylethylenediamine (deeda)- Mn(II) complexes. The rate constant k (per g dry resin) was evaluated over the temperature range 25–40°C. The reaction was first-order with respect to [H₂O₂]. The rate constant, k, with the three ethanolamines decreased in the following order mea > dea > tea which is the same order of basicity. Also, k value with deeda is lower than eda as a result of steric hindrance. The peroxo metal complex which formed at the beginning of the reaction, was found to contain the catalytic active species. The rate of reaction was proportional to [Mn-complex], [H₂O₂] and [H⁺]^?1. The activation parameters were calculated and a probable reaction mechanism is proposed. © 1994 John Wiley & Sons, Inc.     

Alkene epoxidation catalysed by binuclear manganese complexes

Binuclear manganese(II) complexes with macrocyclic ligands have been synthesized by template Schiff base condensation of diethylenetriamine and pentane-2,4-dione or 1,3-diphenyl-propane-1,3-dione. Catalytic epoxidation of simple olefins with hydrogen peroxide and t-BHP were studied using the above manganese complexes in the presence of a base. The influence of reaction temperature, the additive methanol and the cocatalyst had been investigated. The major products of the oxidations were the epoxides. The new manganese complexes showed significant catalytic activities for the epoxidation of alkenes using hydrogen peroxide as oxidant and ammonium acetate as cocatalyst.     

Asymmetric epoxidation of (Z)-enol esters catalyzed by titanium(salalen) complex with aqueous hydrogen peroxide

Titanium(salalen) complex 1 was an effective catalyst for asymmetric epoxidation of enol esters. Although (E)-enol esters were reluctant to proceed, (Z)-enol esters underwent asymmetric epoxidation to give the epoxides in high yields with high enantioselectivity ranging from 86 to >99% ee in the presence of aqueous hydrogen peroxide as the stoichiometric oxidant. Complete enantioselectivity was observed in the reaction of (Z)-3,3-dimethylbut-1-en-1-yl 4-methoxybenzoate. The obtained epoxide was readily transformed into the corresponding 1,2-diol by reduction with lithium borohydride without erosion of the high enantiomeric excess.     

Deprotection of dithioacetals using the tantalum(V) chloride catalyzed oxidation of iodide ion by hydrogen peroxide

Dithioacetals can be deprotected to afford carbonyl groups using the tantalum(V) chloride catalyzed oxidation of iodide ion by hydrogen peroxide under mild conditions.