Synthesis and characterization of novel epoxy monomers and liquid crystal thermosets

Four new epoxy monomers have been synthesized and characterized as part of a program to prepare novel liquid crystal thermoset (LCT) materials. Three of the new epoxy monomers contained a biphenyl mesogen and were not liquid crystalline (LC). The remaining epoxy monomer, which contained a 1,4-dibenzoyloxybenzene mesogen, was synthesized in an overall yield of 30% and displayed a broad (83°C) nematic liquid crystalline phase. The new liquid crystalline epoxy monomer was cured at 120°C and postcured at 175°C with a stoichiometric amount of 1,4-phenylenediamine. The thermal transitions of the resulting LCT were studied by differential scanning calorimetry (DSC), polarized light optical microscopy (POM), thermomechanical analysis (TMA), and wide angle x-ray diffraction (WAXD) as a function of cure time and temperature. A process characterization diagram was constructed which shows that LCTs based on this new LC monomer can be processed in the liquid crystalline phase over a broad range of times and temperatures. Qualitative agreement with previous epoxy LCT results was found, as LCT's with smectic phases and without clearing temperatures were observed at long cure times (high crosslink densities), whereas nematic phases with clearing temperatures predominated in networks at short cure times (low crosslink densities). © 1993 John Wiley & Sons, Inc.     

Preparation and nonlinear optical properties of Au nanoparticles doped TiO2 thin films

Nano-sized noble metal nanoparticles doped dielectric composite films with large third-order nonlinear susceptibility due to the confinement and the enhancement of local field were considered to be applied for optical information processing devices, such as optical switch or all optical logical gates. In this paper, sol–gel titania thin films doped with gold nanoparticles (AuNPs, ~10 nm in average size) were prepared. AuNPs were firstly synthesized from HAuCl₄ in aqueous solution at ~60 °C, using trisodium citrate as the reducing agent, polyvinylpyrrolidone as the stable agent; then the particle size and optical absorption spectra of the AuNPs in aqueous solutions were characterized by transmitting electron microscopy and UV–Vis–NIR spectrometry. Sol–gel 2AuNPs–100TiO₂ (in %mol) thin films (5 layers, ~1 μm in thickness) were deposited on silica glass slides by multilayer dip-coating. After heat-treated at 300–1,000 °C in air, the AuNPs–TiO₂ thin films were investigated by X-ray diffraction, scanning electron microscopy and atomic force microscopy. The nonlinear optical properties of the AuNPs–TiO₂ thin films were measured with the Z-scan technique, using a femtosecond laser (200 fs) at the wavelength of 800 nm. The third-order nonlinear refractive index and nonlinear absorption coefficient of 2AuNPs–100TiO₂ films were at the order of 10^?12 cm²/W, and the order of 10^?6 cm/W, respectively, and the third-order optical nonlinear susceptibility χ⁽³⁾ was ~6.88 × 10^?10 esu.     

Synthesis and crosslinking of a series of dimeric liquid‐crystalline diglycidylester compounds containing imine groups

We used readily available commercial reagents and well‐known procedures to synthesize a series of aromatic imine mesogenic diglycidylester compounds with dimeric architectures. The compounds obtained were characterized by spectroscopic techniques. Their liquid‐crystalline behavior was examined by differential scanning calorimetry, hot‐stage polarized optical microscopy (POM), and wide‐angle X‐ray scattering (WAXS) and related to the different structures that varied in the length of the central spacer. All the compounds exhibited nematic mesophases with the exception of the dimer with a three‐methylene central spacer that did not reveal liquid‐crystalline character. We investigated the crosslinking of the synthesized compounds and obtained liquid‐crystalline thermosets (LCTs) with several primary aromatic diamines in stoichiometric ratios or a tertiary amine as a catalyst. The curing processes were measured by calorimetry, and the thermal stability of the LCTs was evaluated by thermogravimetry. The ordered character of the LCTs was confirmed by POM and WAXS. Finally, the mechanical characterization of the LCTs obtained was examined by dynamic mechanical thermal analysis. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4344–4356, 2002     

On the formation of liquid crystalline texture in epoxy resins

Three epoxy resins and two curing agents were studied in their monomeric as well as polymeric states. Two monomers were monotropic liquid crystals. Characterization of liquid crystallinity before, during and after curing reaction was carried out by DSC, optical microscopy and WAXS. It was found that LC texture develops in every epoxy/(curing agent) system studied in this work. Nucleation and growth is a physical mechanism for the formation of initial liquid crystallinity. The final texture is not well defined and likely contains nematic, poorly ordered smectic and isotropic phases. Schematic diagram of the possible states of LCTs is discussed.     

Isolation of a novel,crystalline cellulose material from the spent liquor of cellulose nanocrystals (CNCs)

We have modified the standard sulphuric acid hydrolysis method for the production of cellulose nanocrystals (CNCs) to successfully isolate a novel, highly crystalline cellulose material from the spent liquor of CNCs. The novel material has a cellulose II crystal structure that is distinctly different from the cellulose I crystal structure of CNCs. The modified method uses a shorter time for the hydrolysis, followed by maintaining a high residual acid concentration for the separation of the spent liquor and CNCs, and by adding the spent liquor to water. The modified method offers an opportunity to concurrently produce CNCs in up to ~40 % yield and the novel, highly crystalline, sulphated cellulose II in ~15 % yield in separate and pure forms from sulphuric acid hydrolysis of a commercial northern bleached softwood kraft pulp. It can potentially reduce the production cost of CNCs, allow easier downstream processing of CNCs and recovery of sulphuric acid, and generate a new cellulose bio-material for product development.     

Synthesis of side chain liquid crystalline copolymers and characterization of their polar structure

A series of side chain liquid crystalline copolymers having different spacer lengths, copolymer compositions, and chromophore types were synthesized and characterized both in the bulk and at the gas‐water interface. Liquid crystalline properties were identified by differential scanning calorimetry (DSC), optical microscopy, and X‐ray diffraction (XRD). Copolymer with spacer lengths 4, 5, 10, and 11 showed smectic A (S_A) phases with a bâtonnet texture. The liquid crystalline (LC) phase stabilized as the spacer increased. Copolymers with different compositions were investigated both as monolayers and transferred films. The isotherms suggest nanodomain formation at the gas‐water interface in copolymers with high nitrobiphenyl (NBP) content. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1057–1070, 1999     

Hybrid fluorescent nanoparticles from quantum dots coupled to cellulose nanocrystals

Carboxylated cellulose nanocrystals (CNCs) were decorated with CdSe/ZnS quantum dots (QDs) using a carbodiimide chemistry coupling approach. The one-step covalent modification was supported by nanoscale imaging, which showed QDs clustered on and around the CNCs after coupling. The QD–CNC hybrid nanoparticles remained colloidally stable in aqueous suspension and were fluorescent, exhibiting the broad excitation and narrow emission profile characteristic of the QDs. QD–CNCs in nanocomposite films imparted strong fluorescence within CNC-compatible matrices at relatively low loadings (0.15 nmol QDs/g of dry film), without altering the overall physical properties or self-assembly of the CNCs. The hybrid QD–CNCs may find applications in nanoparticle tracking, bio-imaging, optical/sensing devices, and anti-counterfeit technologies.     

Thermotropic liquid crystalline α-[bis(2-hydroxyethyl)amino]ω-(4 ′-methoxybiphenyl-4-oxy)alkane hydrochlorides

Liquid crystalline α-[bis(2-hydroxyethyl)amino]- ω -(4′-methoxybiphenyl-4-oxy)alkane hydrochlorides with different spacer lengths (6, 8, 10 methylene units) have been synthesized and characterized by NMR, DSC, polarizing optical microscopy and X-ray diffraction. The melting temperatures of the hydrochlorides decrease with increasing number of methylene units in the spacer. Highly ordered and very viscous liquid crystalline (LC1) smectic phases are formed on melting. Upon further heating these phases are transformed into a less viscous smectic C phase (LC2). The temperature of the LC1-LC2 transition decreases and the temperature of the LC2 to isotropic phase transition (LC2-I transition) increases with increasing number of methylene units in the spacer.     

Lyotropic liquid crystals from designed helical beta-peptides

We demonstrate that 14-helical beta-peptides can self-assemble to form lyotropic liquid crystalline (LC) phases in water. beta-Peptides 1-4 were designed to form globally amphiphilic 14-helices of increasing length. Optical microscopy showed that several of these beta-peptides formed LC phases in aqueous solutions at concentrations as low as 2.5 wt % (15 mM). Liquid crystallinity appears to require the adoption of a globally amphiphilic conformation because a scrambled sequence, 5, does not display LC behavior. Thermal stability and reversibility of LC phase formation were assessed by variable temperature 2H NMR spectroscopy and optical microscopy. The LC phase formed by beta-peptide 3 at 10 wt % is disrupted above 40 degrees C in D2O and re-forms within minutes upon cooling. LC phase behavior for solutions of 3 is influenced by concentration and net charge. These studies demonstrate that highly folded 14-helical beta-peptides can produce LC phases at shorter lengths than do alpha-helical alpha-peptide mesogens and can provide a basis for tailoring properties of LC phases for future applications.     

光致取向调控偶氮苯侧链液晶聚合物的阻隔特性研究

研究了液晶分子的排列方式对聚合物膜阻隔特性的影响,采用473 nm线偏振光照无定形偶氮液晶聚合物,使其介晶基元发生从无序到有序的取向排列.用膜透射率变化和锥光干涉图表征了分子的取向,其锥光干涉图为粗黑十字,说明在线偏振光下作用下液晶分子取向形成了单相畴沿面内排列的有序态.用金属表面氧化法进一步研究了取向态聚合物膜的阻隔...     

Relationship between fracture toughness and domain size of liquid‐crystalline epoxy resins having polydomain structure

A liquid‐crystalline (LC) epoxy resin was cured at different temperatures and some types of curing systems having different phase structures (isotropic or polydomain, which have a microscopically ordered LC network structure) were obtained. The diameters of each domain in the polydomain system changed from the small to the larger size. The diameters of the LC domains were evaluated using a polarized optical microscope and the polarized microscopy FTIR mapping method. These systems were used to investigate the relationship between the network arrangement and mechanical properties. The fracture toughness of the cured systems was related to the enlargement of the ordered area in the network structures. With the toughness improvement, the meandering cracks were observed at the fracture surfaces. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 156–165, 2009     

Main-chain biodegradable liquid crystal based on cholesteryl end-capped polycarbonate copolymers

Main-chain biodegradable liquid crystal (LC) based on cholesteryl end-capped polycarbonate copolymers was investigated. The novel LC was synthesised through ring-opening copolymerisation of trimethylene carbonate with ε-caprolactone (CL) initiated by cholesterol, without adding any catalyst. The chemical structure of the resulting polymers was confirmed by ¹H NMR. The liquid crystalline properties were validated by X-ray diffraction, differential scanning calorimetry and polarising optical microscopy. The results showed that the synthesised polycarbonate copolymers Chol-(TMCL)x + y exhibited liquid crystallinity in particular temperature ranges because of the incorporation of the cholesterol moieties. Furthermore, the effect of CL content on the mesomorphism properties of Chol-(TMCL)_x+y was also investigated; the higher the CL content, the lower the mesomorphism properties. It might be attributed to the hindered orientation of LC caused by the crystallinity of the poly(ε-caprolactone) (PCL) segments in the polymer chain.     

Liquid crystal alignment properties of 2-naphthoxymethyl-substituted polystyrenes

The liquid crystal (LC) alignment properties of LC cells fabricated with films of 2-naphthoxymethyl-substituted polystyrenes with different contents of naphthoxymethyl side groups were investigated. The polymer films exhibited good optical transparency in the visible light region (400–700 nm). The LC cells made from the unrubbed films of polymers having more than 57 mol%?of 2-naphthoxymethyl containing monomeric units showed homeotropic LC alignment with a high pretilt angle of about 90^o. Good electro-optical characteristics, such as the threshold voltage, response time, voltage holding ratio and residual DC voltage were observed for the LC cells fabricated with the polymer having 100 mol%?of 2-naphthoxymethyl containing monomeric units as an LC alignment layer.     

Interplay of colloidal stability of cellulose nanocrystals and their dispersibility in cellulose acetate butyrate matrix

Cellulose nanocrystals (CNC) prepared from eucalyptus cellulose CNCs were modified by the reaction with methyl adipoyl chloride, CNCm, or with a mixture of acetic and sulfuric acid, CNCa. The CNC were either dispersed at 0.1 wt% in the pure solvents ethyl acetate (EA), tetrahydrofuran (THF) and dimethylformamide (DMF) or in cellulose acetate butyrate (CAB) solutions prepared in these solvents at 0.9 wt%. The colloidal behavior of these dispersions was systematically investigated using a phase separation analyzer LUMiReader^®. The mechanical properties and morphological features of the films resulting from the mixtures of CAB and CNC were determined by dynamic mechanical analysis, optical microscopy and atomic force microscopy, respectively. Regardless the functional group attached to the surface of CNC, the best colloidal stability was observed for dispersions prepared in CAB/DMF solution. Higher degree of substitution of modified CNCs favored the colloidal stability in EA and THF. Composite films prepared from CAB/DMF solutions were more homogeneous and presented better mechanical performance than those prepared in CAB/EA or CAB/THF. The mechanical performance of composites and neat CAB prepared from DMF was CAB/CNCs > CAB/CNCm > CAB/CNCa > CAB, indicating that the modification weakens the percolation process, which is mediated by H bonding.     

Morphology of polymer networks polymerized in highly ordered liquid crystalline phases

The morphology and optical properties of polymer stabilized liquid crystals formed in a more highly ordered low molecular weight liquid crystal solvent were studied. Tetrafunctional, mesogenic monomers (with and without flexible spacers) were polymerized in isotropic, nematic and smectic phases of the LC solvent (4′-octyl-4-cyanobiphenyl) and studied with scanning electron microscopy and cross-polarized light microscopy. The network morphology of the nematic and isotropic phase polymerizations showed strong similarities with the corresponding polymerizations in other solvents. Polymerization in the smectic phase, however, resulted in marked increases in network order and directionality. Most dramatically, even the polymer without flexible spacer formed a fibrous network of rodlike units, in contrast to the random, beaded texture formed by the same polymer in nematic or isotropic conditions. Correspondingly, a large increase in birefringence demonstrated significant polymer orientation and more effective orientational interaction with the liquid crystalline solvent.     

Lyotropic liquid‐crystalline behavior of polyisocyanodipeptides

Rigid, helical polyisocyanodipeptides derived from alanine (PIAAs) that form lyotropic liquid‐crystalline (LC) phases in tetrachloroethane are presented. An investigation by optical microscopy between crossed polarizers demonstrated that PIAAs prepared by the polymerization of isocyanodipeptide monomers with an activated tetrakis isocyanide nickel(II) catalyst could form cholesteric LC phases in tetrachloroethane in concentrations between 18 and 30 wt %. Cholesteric LC phases that were formed in solutions of greater than 25 wt % displayed a reversal of the cholesteric helix upon annealing at 50 °C. Diastereomeric PIAA mixtures displayed cholesteric LC behavior only when the PIAAs had the same helix screw sense. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 981–988, 2007     

Supramolecular side chain liquid crystalline polymers assembled via hydrogen bonding between carboxylic acid-containing polysiloxane and azobenzene derivatives

Supramolecular side chain liquid crystalline polymers were prepared from poly(3-carboxypropylmethylsiloxane) (PSI100) and azobenzene derivatives through intermolecular hydrogen bonding (H-bonding) between the carboxylic acid groups in the PSI100 and the imidazole rings in the azobenzene derivatives. The existence of H-bonding has been confirmed using FTIR spectroscopy. The polymeric complexes behave as liquid crystalline (LC) polymers and exhibit stable mesophases. The LC behaviour of these H-bonded polymeric complexes was investigated by differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction. The complexes exhibit nematic LC phases identified on the basis of Schlieren optical textures. On increasing spacer length or the concentration of the H-bonded mesogenic unit in the complex, the clearing temperature and the temperature range of the LC phase of the polymeric complex increase. The terminal group plays a critical role in determining the LC properties of the polymeric complexes. A terminal methoxy group is more efficient than a nitro group in increasing the clearing temperature. The electron donor-acceptor interactions between the H-bonded mesogenic units containing methoxy and nitro terminal groups in supramolecular 'copolymeric' complexes lead to an increase in the clearing temperature and a wider temperature range for the LC phase.     

Phase Behavior of Commercial AES/Ethanol/H2O Ternary System

Phase behavior containing alkyl ethoxysulfates (AES), ethanol, and H₂O over the whole concentration range was explored at 25°C. The system exhibited an isotropic solution phase (L), two different liquid crystalline phases: hexagonal phase (H), lamellar phase (Lα), and a biphasic region appearing with the ethanol concentration increasing. Polarized optical microscopy and small angle x-ray scattering were applied to characterize liquid crystalline phases. Direct two-phase titration and liquid chromatography–mass spectrometry (LC–MS) were employed to analyze the AES activity and homologues composition of the particles appearing in two-phase region.     

The fabrication of novel optical diffusers based on UV-cured polymer dispersed liquid crystals

Polymer dispersed liquid crystals (PDLCs) with different sizes of the LC droplets are prepared based on the ultraviolet (UV) light curable acrylate monomers/LCs composites to fabricate the optical diffuser films. To acquire light diffusers with high optical performance, the effects of the monomer structure and the UV light intensity on the micro-structure of the PDLC films are studied. Results show that the PDLC films could exhibit a strong light scattering at the premise of maintaining high transmittance in the visible region. As the LC droplets are spherically dispersed in the polymer networks, when the size of LC droplets is about 3.0 μm, the haze can reach 88.5% and the transmittance is nearly 90.0%, which can be used as a bottom diffuser film. While when the size of LC droplets is about 10.0 μm, the haze and transmittance are 39.2% and 90.2%, respectively; hence, it can be a good choice for a top diffuser film. With the advantages of simple preparation, roll-to-roll industrial production and tunable optical properties, it is supported that the films based on UV-cured PDLC films can be applied as outstanding optical diffuser films in the liquid crystal display industry.     

Symmetric 3,5-pyrazole and isoxazole heterocycles comprising a bent core unit: synthesis and mesomorphic characterisation

The synthesis and characterisation of some new liquid crystalline (LC) heteroaromatic compounds containing the five-membered pyrazole/isoxazole rings is reported. Some of the compounds exhibited enantiotropic LC properties. The transition temperatures and LC textures of the mesophases were determined using polarised optical microscopy (POM), differential scanning calorimetry (DSC) and X-ray studies. The five-membered heterocyclic compounds with the pyrazole core exhibit smectic C (SmC) phase, whereas isoxazoles show SmC and nematic (N) phases.