Simultaneous LIF and retro-reflected beam interference detection for CE

This Short Communication describes a novel optical detection method for CE, based on the combination of LIF detection and retro-reflected beam interference detection. By the use of a side-illuminated laser beam, an on-column multifunctional detection for CE has been developed, and some key elements in the scheme have been optimized. In addition, two miscellaneous samples including fluorescent dyes, carbohydrates and amino acids have been determined to evaluate its performance. Without any additional pretreatment, sufficient LOD and linear ranges have been achieved for most analytes. Its performance in retro-reflected beam interference detection is better than those mentioned in a former report, and its fluorescent sensitivity is comparable with the achievable sensitivity by conventional LIF systems, all of which together combine high sensitivity and universal analysis to a certain extent.     

Elemental analysis in solutions by radioisotope excited X-ray fluorescence

The problem of spectrochemical analysis of elements in solutions has been investigated for a number of elements across the periodic table using radioisotope-induced energy dispersive X-ray fluorescence method. In this study a low intensity¹⁰⁹Cd X-ray source was used for characteristic X-ray excitation. Experimental parameters such as saturation thickness and critical thickness have been studied to evaluate their role in this method. Minimum detection limits, sensitivities and the nature of concentration calibration at critical thickness have been obtained as a function of Z to find the limits of the method. Results obtained have been discussed in the light of theories and potential areas of applicability of the method have been indicated.     

Reversed-phase extraction chromatography–neutron activation analysis (RPEC–NAA) for copper in natural waters using Amberlite XAD-4 resin coated with 1-(2-thiazolylazo)-2-naphthol

A preconcentration neutron activation analysis method has been developed for the determination of trace levels of Cu in natural waters including seawater with an absolute detection limit of 0.106 μg. The method involves the preconcentration of Cu onto Amberlite XAD-4 resin coated with 1-(2-thiazolylazo)-2-naphthol using reversed-phase extraction chromatography (RPEC). Copper is assayed through its neutron activation product ⁶⁶Cu (half-life = 5.10 min) by direct irradiation of the resin bed. Factors affecting the uptake of Cu onto the ligand-impregnated resin have been investigated; these include flow rate, pH, column height, presence of other trace elements, major elements, and interfering matrix. The RPEC–NAA method has been validated by analyzing NIST and NRC water reference materials.     

电感耦合等离子体质谱测定中草药中痕量稀土元素的研究

本文报道了微波消解／ICP－MS测定中草药中痕量稀土元素的新方法。在优化实验条件下，方法的检出限为0.71-15.2pg/mL，相对标准偏差为0.80%-3.3%，加标回收率为87.4%-106%。该法具有操作简便、快速、灵敏度高、准确度好和多元素同时测定等优点。     

Preconcentration and instrumental neutron activation analysis of acid rain for trace elements

A combination of instrumental and preconcentration neutron activation analysis (NAA) methods has been developed for multielement determination in acid rain. Concentrations of 24 elements have been measured in the particulate matter of rainwater by the instrumental NAA method which involves 3 irradiation and 4 counting periods. Trace elements in the soluble fraction of rainwater have been preconcentrated using Chelex-100 resin. Various factors that could influence the retention of elements on to the resin have been examined, and reagent and other blanks investigated in detail. Concentrations of 15 elements have been measured by directly irradiating the resins. A graphite furnace atomic absorption spectrometry method has been used for determining Cd and Pb levels in the soluble fraction. Precision and accuracy of the methods have been evaluated, and limits of detection and determination calculated. The methods have been applied to rainwater samples collected from 36 locations across Canada. Enrichment factors, interelement and inter-ion concentration correlation coefficients are discussed     

A novel method for the determination of migration of contaminants from food contact materials

A neutron activation method has been developed for the analysis of high density polyethylene, low density polyethylene, polypropylene, polyethylene terephthalate and polystyrene food contact plastics. The method provides determination of over 50 elements at concentrations below 1 mg kg^–1. This technique has now been extended to study migration from food contact materials into standard food simulants (olive oil, acetic acid, ethanol and water). Samples of plastic are irradiated in a thermal neutron flux to produce radionuclides of the elements present in the plastic. Over a period of time the radionuclides of these elements may travel from the plastic into the food simulants, and hence the migration can be determined. Gamma ray spectrometry is performed on the simulants at the end of the test to quantify the migration. Any activity present must be due only to the migration of radionuclides of elements in the plastic and nothing else. This eliminates the need for a blank determination, which is required with existing migration methods. Preliminary studies have shown that detection limits of around 0.002 mg kg^–1 can be achieved for Sb in a retail polyethylene terephthalate (PET) bottle. This can be compared to levels of 0.005     

Principle and analytical applications of resonance lonization mass spectrometry

Resonance ionization mass spectrometry (RIMS) is a very sensitive analytical technique for the detection of trace elements. This method is based on the excitation and ionization of atoms with resonant laser light followed by mass analysis. It allows element and, in some cases, isotope selective ionization and is applicable to most of the elements of the periodic table. A high selectivity can be achieved by applying three step photoionization of the elements under investigation and an additional mass separation for an unambiguous isotope assignment.An effective facility for resonance ionization mass spectrometry consists of three dye lasers which are pumped by two copper vapor lasers and of a linear time-of-flight spectrometer with a resolution better than 2500. Each copper vapor laser has a pulse repetition rate of 6.5 kHz and an average output power of 30 W.With such an apparatus measurements with lanthanide-, actinide-, and technetium-samples have been performed. By saturating the excitation steps and by using autoionizing states for the ionization step a detection efficiency of 4 × 10^–6 and 2.5 × 10^–6 has been reached for plutonium and technetium, respectively, leading to a detection limit of less than 10⁷ atoms in the sample. Measurements of isotope ratios of plutonium samples were in good agreement with mass-spectrometric data. The high elemental selectivity of the resonance ionization spectrometry could be demonstrated.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

Determination of trace elements in acid rain by reversed-phase extraction chromatography and neutron activation

A preconcentration neutron activation analysis (PNAA) method involving reversed-phase extraction chromatography on 8-hydroxyquinoline-loaded Amberlite XAD-2 resin has been developed for the simultaneous determination of selected trace elements in acid rain and natural water samples. Quantitative retention has been achieved for Co, Cu, Hg, V and Zn at pH 6.0 and for Cd at pH 7.0. Various factors that can influence the preconcentration procedure have been studied in detail. Concentrations of the elements have been determined by the direct irradiation of the resin without eluting them from the column. Both precision and accuracy of the PNAA method are very good. The detection limits vary between 0.01 and 3 ppb.     

Plasma emission spectroscopic detectors in HPLC for trace metal analysis and speciation

Plasma emission spectroscopic detection in HPLC has evolved into a significant method of metal analysis and speciation, providing information not readily available via most other HPLC-detector approaches. These newer 'hyphenated' techniques have been applied to a number of metal and nonmetal elements in a wide variety of sample matrices.     

Spectrochemical Determination of Metallic Pollutants At Sub Ppm Levels In Fresh Water Samples

Abstract

A quantitative method to analyse fresh water samples for ultratrace pollutants such as Cd, Cr, Fe, Mn, Ni, Pb, V and Zn has been developed. the impurities in the water sample were preconcentrated by the method of slow evaporation and collected on specpure graphite which was subsequently analysed by d.c. are excitation using NaF as the carrier. the mean relative standard deviation of the method employed is + 15%. the accuracy of the method reported has been found to be quite satisfactory as borne out by the results of the Intercomparison Run conducted by the International Atomic Energy Agency, Vienna for the determination of trace elements in water. the detection limits for the various elements are as follows: Ni, Pb, V : 1 ng/ml; Cd, Cr, Mn: 2 ng/ml; Fe: 15 ng/ml and Zn : 20 ng/ml. Some of these detection limits have been compared with those obtained in some of the recent techniques such as AAS, Laser Induced Fluorescence (LIF) and Laser Enhanced Ionization (LEI) or Opto-Galvanic Spectrometry(òGS). It has been found that there is a tenfold increase in sensitivity for Pb in the present method as compared to the above techniques except LEI while the detection limits obtained for other elements are comparable with those in other techniques.     

Preconcentration neutron activation analysis of trace elements in seawater by coprecipitation with 1-(2-thiazolylazo)-2-naphthol,pyrrolidinedithiocarbamate and N-nitroso-phenylhydroxylamine

A method has been developed for the simultaneous preconcentration of Cd(II), Co(II), Cu(II), Hg(II), Mn(II), Th(IV), U(VI), V(IV) and Zn(II) from 500–1000 ml of water samples by coprecipitation using a combination of 1-(2-thiazolylazo)-2-naphthol, ammonium pyrrolidinedithiocarbamate and ammonium salt of N-nitroso-phenylhydroxylamine. The elemental contents have been measured by neutron activation analysis using different schemes of irradiation, decay and counting periods. Quantitative recoveries of all the above elements have been achieved between pH 6.0 and 7.2. For most of the elements, the enrichment factors are of the order of 10⁴. The precision, expressed in terms of relative standard deviation, and accuracy of measurements are within ±5–10%. The detection limits are in the ppb range. The method has been applied to sea and drinking water samples and biological materials.     

Neutron activation analysis of pure uranium: Preconcentration of impurity elements

We have developed a radiochemical neutron activation analysis technique (RNAA) of pure uranium with using extraction chromatographic separation of ²³⁹Np from impurity elements in TBP-6M HNO₃ media. The estimation of influence of fission products of ²³⁵U on the results by radiochemical neutron activation analysis has been carried out. For it we have performed NAA with preconcentration of impurity elements. Experiments show that in this case the apparent concentration of Y, Zr, Mo, Cs, La, Ce, Pr, Nd exceeds the true concentration by 2500–3000 times. Therefore, determination of these elements is not possible by RNAA. This technique allowed to use the determination of 26 impurity elements with detection limit 10⁻⁵–10⁻⁹% by mass. This developed technique may be used for the determination of impurities in uranium and its compounds.     

Removal of sodium and chlorine from seawater prior to neutron activation analysis for trace elements

A neutron activation analysis (NAA) method has been developed for the determination of 14 elements in seawater samples. The method consists of pre-irradiation separations of interfering elements, viz. Na with hydrated antimony pentoxide, leached Sb using either acid aluminum oxide or tin dioxide, and Cl and Br with a mixture of nitric acid and hydrogen peroxide, followed by 3 different irradiation, decay and counting periods. Concentrations of Ag, Co, Cr, Cu, Fe, La, Lu, Mn, Mo, Sc, Sm, Ti, V and Zn have been measured and compared with those obtained by an independent preconcentration method. Precision and limits of detection and determination have been evaluated.     

Total reflection X-ray fluorescence analysis of pollen as an indicator for atmospheric pollution

The viability of pollen is affected by environmental pollution and its use as a bio-indicator is proposed. Such effects can be observed and quantified by biological tests. However, a more accurate identification of the agents affecting the viability is required in order to validate the biological assay for environmental monitoring. The chemical analysis of pollen is meant to ascertain the existence of a correlation between its reduced biological functions and the presence of pollutants. Moreover, such biological systems act as accumulators and allow the detection and quantification of species present in the environment at low concentrations. Total reflection X-ray fluorescence analysis (TXRF) has been chosen for the investigation due to its high sensitivity, multielement capability and wide dynamic range. Corylus avellana L. (hazel) pollen has been collected in areas with different anthropic impact in the province of Trento, Italy. For the TXRF measurements, a liquid sample is needed, especially if a quantitative analysis is required. In the present work, the analysis after a microwave digestion has been compared with the analysis of a suspension of the pollen samples. In both cases, an internal standard has been used for the quantification. The concentrations of 17 elements ranging from Al to Pb have been determined in 13 samples. Analysis of the suspensions showed to be comparable to that of digested samples in terms of spectral quality, but the latter preparation method gave better reproducibility. Sub-ppm lowest limits of detection were obtained for iron and heavier elements detected.     

Determination of uranium, thorium, and 20 other elements in high-purity tungsten by radiochemical neutron activation analysis

A radiochemical neutron activation analysis method for the determination of 22 elements in high-purity tungsten has been developed. For the assay of indicator radionuclides with long half-lives, the radiochemical separation was performed from HF/H₂O₂, HF/NH₄F and HCl/H₂SO₄ media by a combination of cation and anion exchange on a Dowex 50 W × 8 and Dowex 1 × 8 column. An effective removal of the matrix-produced radionuclides of W and Re was achieved. U was determined via ¹⁴⁰La, the daughter nuclide of the fission product ¹⁴⁰Ba. Limits of detection of 2 ng/g for U and 0.02 ng/g for Th can be achieved. For the other elements, the limits of detection are between 0.004 ng/g (Sc) and 200 ng/g (Sr). The elements Hf, Ta and Sb could be determined by instrumental neutron activation analysis. This method was applied to the analysis of two tungsten powder samples of different purity grade. The results and limits of detection are compared with those of other methods.     

A new technique for the 14 MeV neutron activation analysis of sodium and potassium

Cerenkov radiation produced in perspex by β and γ emitters may be readily measured by counting in the tritium channel of a liquid scintillation spectrometer, a technique which has interesting applications in neutron activation analysis. Further the fact that there are often considerable variations in the β energies of different radionuclides produced by activation means that by the use of suitable absorbers the determination of isotopes in a mixture is frequently possible. Such a method has been applied in the determination of a mixture of sodium and potassium. At the same time sensitivities and detection limits of the other alkali elements have been investigated and compared with results obtained from conventional gamma spectral analysis. Using such a technique it has proved possible to effect a considerable increase in sensitivity for the determination of sodium and potassium.     

Measurement of trace element concentration in a metal matrix using total reflection X-ray fluorescence spectrometry

Total reflection X-ray fluorescence spectroscopy (TXRF) has been used in combination with synchrotron radiation in order to determine detection limits and lowest limits of concentration of trace elements in metal matrices. Two applications on irradiated material are described, where the TXRF method has some advantages, as compared to other detection methods, because only few micrograms of material is needed for the measurements. The first application is devoted to radiation damage studies on first wall material of future fusion reactors. Therefore, metal foils were irradiated with 590 MeV protons at PSI and the transmutational elements produced in the foils were measured. The second application is the assessment of radiation damage of core components in a nuclear power plant, e.g. the reactor pressure vessel. This is performed by the determination of the fast neutron fluence on the components using an activation reaction of ⁹³Nb which is a trace element in most reactor steels. Detection limits of a few picograms have been found in the experiments.     

Direct solution analysis using an arc source incorporating two plasmas rotating in a graphite tube

As a continuation of earlier work on arc sources for the spectrochemical analysis of powdered samples, a source appropriate for multi-element analysis of trace elements in solution has been developed. The nebulized solution to be analysed is introduced into a horizontal graphite tube in the gap between two plasmas rotating in a magnetic field. Both water and ethanol have been used as solvents and the effect of lithium additions on the detection limits for certain elements has been studied. This source provides advantageous conditions for the determination of trace elements present at very low concentrations. Source parameters investigated include a study of the magnetically induced rotation of the plasmas by high speed cine photography, and the temperature distribution within the tube. Both aqueous and ethanol solutions were used and the effect of lithium additions was measured.     

Determination of uranium, thorium, and 20 other elements in high-purity tungsten by radiochemical neutron activation analysis

A radiochemical neutron activation analysis method for the determination of 22 elements in high-purity tungsten has been developed. For the assay of indicator radionuclides with long half-lives, the radiochemical separation was performed from HF/H₂O₂, HF/NH₄F and HCl/H₂SO₄ media by a combination of cation and anion exchange on a Dowex 50 W × 8 and Dowex 1 × 8 column. An effective removal of the matrix-produced radionuclides of W and Re was achieved. U was determined via ¹⁴⁰La, the daughter nuclide of the fission product ¹⁴⁰Ba. Limits of detection of 2 ng/g for U and 0.02 ng/g for Th can be achieved. For the other elements, the limits of detection are between 0.004 ng/g (Sc) and 200 ng/g (Sr). The elements Hf, Ta and Sb could be determined by instrumental neutron activation analysis. This method was applied to the analysis of two tungsten powder samples of different purity grade. The results and limits of detection are compared with those of other methods. Received: 28 July 1997 / Revised: 29 October 1997 / Accepted: 1 November 1997     

Determination of arsenic, cadmium, cobalt, chromium, lead, molybdenum, nickel, and selenium in fertilizers by microwave digestion and inductively coupled plasma-optical emission spectrometry detection: collaborative study

There is increasing regulatory interest in the non-nutritive metals content of fertilizer materials, but at present there is no consensus analytical method for acid digestion and instrument detection of those elements in fertilizer matrixes. This lack of method standardization has resulted in unacceptable variability of results between fertilizer laboratories performing metals analysis. A method has been developed using microwave digestion with nitric acid at 200 degrees C, followed by inductively coupled plasma-optical emission spectrometry instrument detection, for the elements arsenic, cadmium, cobalt, chromium, molybdenum, nickel, lead, and selenium. The method has been collaboratively studied, and statistical results are here reported. Fourteen collaborators were sent 62 sample materials in a blind duplicate design. Materials represented a broad cross section of fertilizer types, including phosphate ore, manufactured phosphate products, N-P-K blends, organic fertilizers, and micro-nutrient materials. As much as possible within the limit of the number of samples, materials were selected from different regions of the United States and the world. Limit of detection (LOD) was determined using synthetic fertilizers consisting of reagent grade chemicals with near zero levels of the non-nutritive elements, analyzed blindly. Samples with high iron content caused the most variability between laboratories. Most samples reasonably above LOD gave HorRat values within the range 0.5 to 2.0, indicating acceptable method performance according to AOAC guidelines for analyses in the mg/kg range. The method is recommended for AOAC Official First Action status.