Charge control in the formation of complexes of phenol with unsaturated compounds containing organometallic substituents from group IV

The resonance donor effect of the , conjugation of R₃M and R₃MCH₂ (M = Si, Ge, Sn; R is an alklyl group) substituents with the triple bond in compounds R₃MC=CX and R₃MCH₂CCX (X = H, R) changes on passing from isolated molecules to their H-complexes. A partial ⁺ charge on the triple bond enhances , conjugation; a partial ^– charge on the triple bond has practically no effect on the resonance properties of R₃M substituents, whereas the , conjugation of R₃MCH₂ substituents diminishes owing to the effect of negative direct resonance interaction. The effect of , conjugation on the effective negative charges of the carbon atoms in the -CC- fragments was estimated quantitatively.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1041–1046, June, 1994.This work was supported by the Russian Fundation for Basic Research (Grant 93-03-18372).     

Kinetics and mechanism of OsO4 catalyzed oxidation of chalcones by Ce4 in aqueous acetic sulfuric acid media

Kinetics of OsO₄ catalyzed oxidation of chalcones by Ce⁴⁺ has been studied in aqueous acetic-sulfuric acid medium in the temperature range 313 to 338 K. The order in [oxidant] is zero while the order with respect to [substrate] and [catalyst] are each fractional. The rate of the reaction decreased with increase in percentage of acetic acid while [H⁺] had practically no effect on the rate The rates of various substituted chalcones (with substituents in the phenyl. ring attached to the moiety) are in the orderp-CH₃>m-CH₃>H>p-Cl>m-Cl>m-NO₂>p-NO₂. A mechanism in which formation of a cyclic ester between chalcone and OsO₄ in a fast step followed by its decomposition in a rate-determining step is envisaged.

---

Ce⁴⁺, OsO₄, - 313–338 . —, —. , [H⁺] . ( , : -CH₃>-CH₃>H>-Cl>-NO₂>-NO₂. , OsO₄ , , .

     

Partial oxidation of methane on Cr2O3/Al2O3

The oxidation of methane on supported chromia was studied at temperatures varying between 423 and 743 K and CH₄/O₂ ratios between 1 and 9 in a differential reactor. The main reaction products observed were carbon monoxide and formaldehyde. The rates of reaction obey a power law expression.

---

, 423 743 CH₄/O₂ 1 9, . . .

     

Some remarks on the solubility of gases in liquid long-chainn-alkanes andn-alkan-1-ols

The Ostwald coefficients L_2,1 of He, Ne, Ar, Kr, Xe, N₂, O₂, CH₄ CF₄ and SF₆ dissolved in several homologous_n-alkanes,_n-C₁H₂₁₊₂, 6l16, andn-alkan-1-ols,n-C₁H₂₁₊₁OH, 1l11, were recently measured at 298.15 K and atmospheric pressure with a modified Ben-Naim/Baer apparatus. Altogether, 201 gas/liquid systems were investigated. For about half of these systems, both pressure control and measurement of the volume of gas dissolved in a given volume of solvent were achieved with a microprocessor. This improved medium-precision instrument (0.5% in most cases) combines easy handling with fully automated data retrieval, and is totallymercury-free. In this communication, the salient points of data reduction are presented, with the focus on the estimation of several important auxiliary quantities such as second virial coefficients and partial molar volumes at infinite dilution. The effect of the chain lengthl of then-alkane or then-alkan-1-ol upon solubility is demonstrated, and some correlations betweenL _2,1, or the derived Henry fugacitiesH _2,1, and appropriate molecular and/or bulk properties of the gases and the solvents are discussed.     

Monomeric copper(II) and nickel(II) complexes of N,N,N′,N′-tetrakis [(2-benzimidazolyl)methyl]-1,2-cyclohexanediamine], a chelating ligand containing imidazole groups

Summary Cu^II and Ni^II coordination compounds with N,N,N,N-tetrakis[(2-benzimidazolyl)methyl]-1,2-cyclohexanediamine (CDTB) have been prepared and characterized. The crystal structure of [Cu(CDTB)](ClO₄)₂ has been determined. The geometry around the Cu atom is highly irregular and can best be described as a cis-distorted octahedron, with four short CuN bond distances of 1.988(3) Å and 2.028(3) Å, and two very long CuN bond lengths of 2.543(4) A. The cis NCuN chelate angles in the complex range from 68.8(2) for N(1)CuN(1) to 141.03° for N(4)CuN(1). The cyclic voltammogram of the complex shows a fully reversible one-electron redox wave at E _1/2 = 0.162V versus standard calomel electrode, corresponding to the Cu^I/II redox couple. The structure of [Ni(CDTB)](NO₃)₂ ·EtOH has also been determined. The geometry around the Ni atom in this compound can be described as distorted octahedral, with N(4), N(4), N(1), N(1) as the ligating atoms in the basal plane, with cis chelate angles ranging from 79.37(10) to 120.9(2)° with the trans N(2)NiN(2) angle at 175.1(2)°. The structural differences in these two compounds are undoubtedly electronic rather than steric.     

Catalytic and physico-chemical properties of Al2O3?H3PO4 system, II. Donor-acceptor properties

Donor-acceptor properties of catalysts containing different quantities of orthophosphoric acid on -alumina were studied. The decrease in N₂O decomposition rate was found to be parallel with that of one-electron donor sites. Catalysts containing more than 0.4 mmol H₃PO₄/g Al₂O₃ exhibit individual surface properties due to the formation of an aluminium phosphate phase in the surface layer.

---

- , -Al₂O₃. , N₂O . , 0,4 H₃PO₄/ Al₂O₃ .

     

Crystal structure and characterization of the bis(n-benzyl-benzotriazole-n3)-dichloro Co(II) complex: CoCl2(C6H4N3CH2Ph)2

The structure of [CoCl₂(C₆H₄N₃CH₂Ph)₂] has been determined by X-ray crystallography. It is also characterized by elemental analysis, IR and electronic spectroscopy, and by thermogravimetric differential thermal analysis. It crystallizes in the monoclinic system, space group C2/c, with lattice parameters a = 16.133(3) , b = 11.355(2) , c = 15.637(3) , = 117.22(3)°, and Z = 8. The crystal structure of the title compound consists of monomeric molecules of [CoCl₂(C₆H₄N₃CH₂Ph)₂] with slightly distorted tetrahedron geometry for the CoCl₂N₂ chromophore. The thermal gravimetry (TG) data indicate that there are four decomposition steps with five endothermic peaks. The final product of the thermal decomposition is CoCl₂. Elemental analysis and the electronic and IR spectra are in agreement with the structural data.Original Russian Text Copyright © 2004 by F. Jian, H. Wang, and H. XiaoTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 4, pp. 723–728, July–August, 2004.This revised version was published online in April 2005 with a corrected cover date.     

Physicochemical properties of Cr/TiO2 solid solutions

Solid solutions of Cr³⁺ ions in TiO₂ have been prepared by impregnating commercial TiO₂ with CrO₃(aq) and annealing in O₂ at 770 K. X-Ray diffraction data show the absence of a segregated Cr₂O₃ phase. The magnetic and spectroscopic properties have also been investigated.

---

Cr³⁺ TiO₂ TiO₂ CrO₃(.) O₂ 770 . Cr₂O₃. .

     

Isomerization of unsaturated compounds on Pd/Al2O3 in the presence of additives

Studies of the effect of zinc chloride and aluminium additives on the activity of a Pd/Al₂O₃ catalyst (5 wt.%Pd) in the isomerization of heptene-1, allylbenzene,p-allylphenol and 4-allyl-2-methoxyphenol (eugenol) indicate that the rate and selectivity of isomerization depend on the sequence of addition of salts and reagent to the catalytic system. The simultaneous addition of ZnCl₂ or AlCl₃ with olefin, produces a 2–3 fold increase in the isomer yield compared to ethanol.

---

Pd/Al₂O₃- (5 .% Pd) -1, , -, 4--2- (). , . ZnCl₂ AlCl₃ 2–3 .

     

Kinetics and mechanism of nucleophilic substitution of dichloro{1-methyl-2-(arylazo)imidazole}palladium(II) by pyridine bases

The reaction of dichloro{1-methyl-2-(arylazo)imidazole}palladium(II), Pd(RaaiMe)Cl₂ where RaaiMe = p-R–C₆H₄N=N–C₃H₂N₂-1-Me; R = H(1), Me(2), Cl(3), with pyridine bases [RPY: R = H (a), 4-Me (b), 4-Cl (c), 2-Me (d), 2,6-Me₂ (e), 2,4,6-Me₃ (f)] has been studied spectrophotometrically in MeCN at 451 nm. The products (4) have been isolated and characterised as trans-Pd(RPy)₂Cl₂. The kinetics of the nucleophilic substitution has been examined under pseudo-first-order conditions at 298 K. A single phase reaction step has been observed for bases such as Hpy (a), 4-MePy (b) and 4-ClPy (c) and follows the rate law: rate = (a + k[RPy]²[Pd(RaaiMe)Cl₂]). The bases 2-MePy (d), 2,6-Me₂Py (e) and 2,4,6-Me₃Py (f) exhibits a bi-phasic reaction and follows the rate laws: rate–1 = (a + k[RPy][Pd(RaaiMe)Cl₂]) and rate–2 = (a + k[RPy][Pd(RaaiMe)-Cl₂]), where k is the third-order rate constant; k is the second-order first phase rate constant, k is the second-order second phase rate constant and a/a/a correspond to the solvent dependent constant of the respective reaction path. The rate data supports a nucleophilic association path. External addition of Cl^– (LiCl) suppresses the rate, which follows the order: k/k/k (3) > k/k,k (1) > k/k,k (2). The k values are linearly related to the Hammett constants. The 2-substituted pyridines (d–f) remarkably reduce the rate and show a bi-phasic reaction behaviour as compared with 4-Rpy (a–c). This is attributed to the steric effect that destabilises the transition state. The rate decreases with increasing steric crowding at the ortho-position and follows the order: (d) > (f) > (e). The 4-substituted pyridines control the rate via an inductive effect and follow the order: (b) > (a) > (c).     

X-ray study of Re/Al2O3 and Re+Pt/Al2O3 catalysts using synchrotron radiation

Uning synchrotron radiation, L_III rhenium absorption spectra have been studied for Re/Al₂O₃ and Re+Pt/Al₂O₃ catalysts obtained by impregnation. For individual rhenium compounds a linear dependence between the shift of absorption edge and the state of rhenium oxidation has been found. The absorption spectra of reduced catalysts are significantly broadened as compared with those of individual compounds of the same valency. This points to the presence of rhenium compounds in different oxidation states.

---

L_III- , Re/Al₂O₃ Re+Pt/Al₂O₃, . . . .

     

Thermal decomposition of zirconyl oxalates

Conditions for the preparation of stoichiometric barium zirconyl oxalate heptahydrate (BZO) have been standardized. The thermal decomposition of BZO has been investigated employing TG, DTG and DTA techniques and chemical and gas analysis. The decomposition proceeds through four steps and is not affected much by the surrounding gas atmosphere. Both dehydration and oxalate decomposition take place in two steps. The formation of a transient intermediate containing both oxalate and carbonate groups is inferred. The decomposition of oxalate groups results in a carbonate of composition Ba₂Zr₂O₅CO₃, which decomposes between 600 and 800° and yields barium zirconate. Chemical analysis, IR spectra and X-ray powder diffraction data support the identity of the intermediate as a separate entity.

---

Zusammenfassung Die Bedingungen für die Herstellung von stöchiometrischem Barium-zirconyl-oxalat Heptahydrat (BZO) wurden standardisiert. Die thermische Zersetzung von BZO wurde unter Einsatz der TG-, DTG- und DTA, sowie der chemischen und Gasanalyse untersucht. Die Zersetzung verläuft über vier Stufen und wird von der umgebenden Gasathmosphäre nicht besonders beeinflusst. Sowohl die Dehydratisierung als auch die Oxalatzersetzung erfolgt in zwei Stufen. Die Bildung einer intermediären Übergangsverbindung mit sowohl Oxalat- als auch Carbonatgruppen wirken hierbei mit. Die Zersetzung der Oxalatgruppen ergibt ein Carbonat der Zusammensetzung Ba₂Zr₂O₅CO₃, das zwischen 600 und 800° zersetzt wird und Bariumzirconat ergibt. Die Angaben der chemischen Analyse, der IR-Spekren und der Röntgen-Pulver-Diffraktion unterstützen die Identität der Intermediärverbindung als eine separate Einheit.

---

Résumé On a standardisé les conditions de préparation de l'oxalate heptahydraté de zirconyle et de baryum (BZO) stoechiométrique. On a étudié la décomposition thermique de BZO par TG, TGD et ATD ainsi que par analyses chimiques et analyses des gaz. La décomposition a lieu en quatre étapes et n'est pas trop influencée par l'atmosphère ambiante. La déshydratation et la décomposition de l'oxalate ont lieu en deux étapes. Il se forme un composé intermédiaire de transition contenant à la fois les groupes oxalate et carbonate. La décomposition des groupes oxalate fournit un carbonate de composition Ba₂Zr₂O₅CO₃ qui se décompose entre 600 et 800° pour fournir du zirconate de baryum. L'analyse chimique, les spectres IR et la diffraction des rayons X sur poudre, apportent les preuves de l'existence d'un composé intermédiaire comme entité séparée.

---

() . , , . . . , . Ba₂Zr₂O₅CO₃, 600–800 c . , .

---

---

The authors express their sincere thanks to Professor A. R. Vasudevamurthy for his keen interest and constant encouragement. One of us (TG) is grateful to the Council of Scientific and Industrial Research, India, for the award of a research fellowship.     

Methane synthesis from CO/H2O mixture on supported nickel catalysts, II. Surface species in CO?H2 and CO?D2O interaction by IR spectroscopy

The species resulting in CO, CO+H₂ or CO+D₂O adsorption on supported Ni catalysts were followed by IR spectroscopy and their role in methane synthesis mechanism is discussed.

---

- , CO, CO+H₂ CO+D₂O . .

     

Isomerization and secondary metathesis of 2-butenes over a MoO3/Al2O3 catalyst

Transformation of cis- and trans-2-butene at 40°C was investigated over a MoO₃/A₂O₃ catalyst reduced with hydrogen and subjected to different pretreatments. Isomerization is accelerated by hydrogen preadsorbed either at low or high temperatures. The cometathesis of 2-butenes with the 1-butene intermediate, however, is enhanced only by hydrogen preadsorbed at low and suppressed by hydrogen adsorbed at high temperatures.

---

- -2- 40°C MoO₃/Al₂O₃, . , , . 2- 1- , ; , .

     

Quantitative electron-probe microanalysis of light elements: Determination ofa-Si∶C∶N∶O∶H insulating films

Amorphous SiCNOH films (1–3 m) are studied by EPMA after deposition of gold (1–5 nm) as a conductive coating. Its influence on thek-ratios (X-ray intensity relative to an uncoated standard) of silicon, carbon, nitrogen and oxygen is described as a linear function of the simultaneously determinedk-ratio of gold. Thek-ratios representing the uncoated specimen are obtained by extrapolation and, in combination with the PAP matrix correction model, quantitative EPMA can be performed with an analytical error of 2–5%, as it is demonstrated by samples of SiC, Si₃N₄ and SiO₂. No systematic shift of the concentrations is observed for layers ofa-SiCNOH determined at various electron energies of 5–12.5 keV. Hydrogen is calculated by difference and the concentrations prove to be a useful estimate in agreement with the results of chemical analysis. Si-K/Si-K spectra recorded on organo-silicon films and binary silicon compounds point out significant differences concerning the formation of Si-C, Si-N and Si-O chemical bonds.     

Comparative plasma SNMS and AES measurements on ceramic powders and fibres

SNMS depth profiles of layers of 0.4–0.8 m sized Si₃N₄, BN and partly SiC-coated B₄C powder particles and of 10 m sized SiC fibres are obtained without great expenditure on time and specimen preparation. Close contact with Au foil provides for electrical conductivity. Averaged depth profiles of a great number of particles or fibres are obtained. AES serves as a comparative method; the carrier-gas heat extraction (inert gas fusion) technique is used for the semiquantification of OH signals in SNMS. Esterification of surface OH with ethanol during suspension is not detectable. Hydrolyzation or oxidation reactions having penetrated through the bulk of BN particles cause qualitatively different depth profiles than found on Si₃N₄ particles carrying a nm thin natural (hydr-)oxidic layer. The effects of preparative surface reactions like additive coating (SiC on B₄C particles), etching and oxidation (of SiC fibres) can be monitored. Quantification attempts yield standard deviations between 10 and 50%.Presented on the 15. Kollquium über Werkstoffanalytik, Vienna, May 27–29, 1991     

Voltammetric studies on composition and stabilities of complexes of tetracycline and oxytetracycline with some metal ions in aqueous medium

Summary The composition and stability of complexes of tetracycline and oxytetracycline with Cu(II), Cd(II), Pb(II) and UO₂(II) have been studied polarographically (direct current and differential pulse polarographic techniques) at 25±0.1°C. Differential pulse polarographic studies have been particularly helpful in deciding the nature of metal-drug interactions at low concentrations. The reduction of Cu(II)-tetracycline has been found to be irreversible and diffusion controlled with the presence of an adsorption component. In the system uranyl(II)-tetracycline the complex formed has a stoichiometry of 1:1 and logK _ox=4.04 which is very close to that obtained by potentiometric measurements. The peak half widthW _1/2 of the Pb(II)-OTC system is 60 – 70mV indicating that the process is reversible and two electrons are consumed. The log is 10.30 in 0.1 mol dm^–3 NaClO₄. In the Cu(II)-OTC system two complexes were formed with log ₁=8.50 and log ₂=14.10. Cyclic voltammograms were recorded using a hanging dropping mercury electrode for the systems Cu(II), Cd(II), Pb(II) and UO₂(II)-OTC to examine the irregularities in both peak potentials and peak currents during the polarographic investigations.

---

Voltammetrische Untersuchungen zur Zusammensetzung und Stabilität von Komplexen von Tetracyclin und Oxytetracyclin mit einigen Metallionen in wäßrigem Medium

Zusammenfassung Es wurden Zusammensetzung und Stabilität von Tetracyclin- und Oxytetracyclin-Komplexen mit Cu(II), Cd(II), Pb(II) und UO₂(II) polarographisch mittels Direktstrom- und differentieller Pulspolarographie-Technik bei 25±0.1°C bestimmt. Zur Aufklärung der Metall-Substrat-Wechselwirkungen bei geringen Konzentrationen waren insbesonders differentielle Pulspolarographie-Untersuchungen erfolgreich. Es wurde festgestellt, daß die Reduktion von Cu(II)-Tetracyclin irreversibel und diffusionskontrolliert verläuft. Im System Uranyl(II)-Tetracyclin hat der Komplex eine Stöchiometrie von 1:1 und ein logK _oxvon 4.04; dieser Wert ist dem aus potentiometrischen Messungen erhaltenen sehr ähnlich. Die Peak-Halbwertsbreite des Pb(II)-OTC-Systems ist 60 – 70 mV und zeigt damit einen reversiblen Prozess bei Verbrauch von zwei Elektronen an. In 0.1 mol dm^–3 NaClO₄ ist log 10.30. Im Cu(II)-OTC-System werden zwei Komplexe mit log ₁=8.50 und log ₂=14.10 gebildet. Die cyclischen Voltammogramme wurden unter Verwendung einer hängenden tropfenden Quecksilberelektrode für die Systeme Cu(II), Cd(II), Pb(II) und UO₂(II)-OTC aufgenommen, um die Unregelmäßigkeiten der Peak-Potentiale und der Peak-Ströme während der polarographischen Untersuchung zu überprüfen.

     

Microthermogravimetric studies of the kinetics and thermodynamics of heterogeneous reactions in sulfur-containing atmospheres

A thermobalance for studies of the high-temperature sulfidation of metals and alloys is described. This apparatus permits the determination of mass changes in the sulfidized sample as functions of temperature and sulfur vapour pressure with an accuracy of 10^–6 g. Besides heterogeneous kinetics measurements, it has been shown that the chemical diffusion coefficients and deviations from stoichiometry of metal sulfides can also be studied as functions of temperature and sulfur pressure by means of equilibration measurements.

---

Zusammenfassung Es wird eine Thermowaage zur Untersuchung der Hochtemperatur-Sulfidierung von Metallen und Legierungen beschrieben. Diese Apparatur ermöglicht die Bestimmung von MassenverÄnderungen der sulfidierten Proben in AbhÄngigkeit von der Temperatur und dem Schwefeldampfdruck mit einer Genauigkeit von 10^–6 g. Es wird gezeigt, da\ damit, sofern Gleichgewichtsmessungen ausgeführt werden, auch die chemischen Diffusionskoeffizienten und Abweichungen der Metallsulfide von der Stöchiometrie in AbhÄngigkeit von der Temperatur und dem Schwefeldampfdruck untersucht werden können.

---

. 10^–6 . , , , .

     

Catalytic activity of perovskite-type oxides LaMeO3

Catalytic activities for CO oxidation of a series of LaMeO₃(Me³⁺=V³⁺, Cr³⁺, Mn³⁺, Fe³⁺, Co³⁺, Ni³⁺) perovskite-type oxides were measured. Maxima for Mn³⁺ and Co³⁺ were found. The relation between local symmetry of solid surfaces and chemisorption and catalysis is discussed.

---

, LaMeO₃ (Me⁺³=V⁺³, Cr⁺³, Mn⁺³, Fe⁺³, Co⁺³, Ni⁺³) CO. Mn⁺³ Co⁺³. , .