Sol-gel electrolytes in lithium batteries

This paper presents the results of the thermodynamic calculations of material compatibility along with the results of the experimental studies using lithium aluminosilicate gel electrolyte in lithium batteries. Initially, there were problems with gel monoliths and porous cathodes in the Li solid electrolyte batteries. Better results were obtained through the direct application of thin films of the lithium aluminosilicate gels to the surfaces of dense, sintered oxide cathodes. It was important to maintain extremely low moisture and oxygen levels in the dry glove box during the assembly and testing of the battery, especially when it came to achieving good contact between the sol-gel electrolyte and the lithium metal. Suggestions are given about procedures for further development of the sol-gel electrolyte batteries.     

Lithium storage in perovskite lithium lanthanum titanate

Perovskite lithium lanthanum titanate (LLTO) was synthesized using sol–gel method. It shows a reversible capacity of 145 mA h g^− 1 and moderate cycling performance between 0.01 and 2.00 V. Cyclic voltammetry and X-ray diffraction results demonstrate a two-step solid–solution reaction behavior in the voltage range of 0.00–3.00 V upon lithium insertion/extraction. A stable solid electrolyte interphase (SEI) layer is formed on the surface of LLTO after the initial discharge. Carbon coating by chemical vapor deposition improves its cycling performance significantly.     

Lithium potassium borate and lithium rubidium borate: new non‐linear optical crystals

The title compounds, LiKB₄O₇ and LiRbB₄O₇, are newly developed non‐linear optical crystals containing two kinds of anionic groups, namely (B₃O₈)^7? and (B₅O₁₀)^5?. The (B₃O₈)^7? groups form infinite spiral chains parallel to the [100] direction, which are interconnected by sharing O atoms with (B₅O₁₀)^5? groups.     

锂镍钴复合氧化物锂离子电池正极材料的研究

本文报道了以碱式碳酸镍、碱式碳酸钴和碳酸锂为原料 ,柠檬酸为络合剂的新溶胶凝胶法制备复合锂镍钴氧化物锂离子电池正极材料 .氧气流中制备的LiNi0 .8Co0 .2 O2 具有高的循环容量 (～ 190mAhg 1)     

Molecular dynamics simulations of lithium alkyl carbonates

A quantum chemistry-based many-body polarizable force field has been developed for two model solid-electrolyte interphase (SEI) components: dilithium ethylene dicarbonate (Li(2)EDC) and lithium methyl carbonate (LiMC). Molecular dynamics (MD) simulations of amorphous Li(2)EDC and LiMC were performed at temperatures from 393 to 600 K. Simulations reveal that Li(+) is coordinated by approximately 4.6 oxygen atoms from -COO(-) groups coming from different alkyl carbonate molecules. Charge transport in Li(2)EDC was found to be almost entirely due to Li(+). The temperature dependence of the ionic conductivity of the SEI model compounds Li(2)EDC and LiMC was found to be significantly stronger than that of liquid electrolytes (e.g., ethylene carbonate + LiTFSI), yielding extrapolated conductivities of the Li(2)EDC on order of 10(-10) S/cm at -30 degrees C.     

A molecular dynamics simulation of lithium fluoride: Volume phase and nanosized particle

The PC GAMESS package was used to obtain interionic pair potentials for lithium fluoride. A molecular dynamics simulation of the volume phase and nanosized LiF particle was performed. The temperatures of fusion and self-diffusion coefficients of the volume phase and lithium fluoride nanoparticle were found; for the volume phase, they were close to the experimental data. The temperature of fusion of a particle ～2 Å in diameter decreased by ～600 K. The possibility of a considerable increase in ionic conductivity over the temperature range 520–1122 K was demonstrated for nanosized LiF.     

Lithium peroxide surfaces are metallic, while lithium oxide surfaces are not

The thermodynamic stability and electronic structure of 40 surfaces of lithium peroxide (Li(2)O(2)) and lithium oxide (Li(2)O) were characterized using first-principles calculations. As these compounds constitute potential discharge products in Li-oxygen batteries, their surface properties are expected to play a key role in understanding electrochemical behavior in these systems. Stable surfaces were identified by comparing 23 distinct Li(2)O(2) surfaces and 17 unique Li(2)O surfaces; crystallite areal fractions were determined through application of the Wulff construction. Accounting for the oxygen overbinding error in density functional theory results in the identification of several new Li(2)O(2) oxygen-rich {0001} and {1 ?100} terminations that are more stable than those previously reported. Although oxygen-rich facets predominate in Li(2)O(2), in Li(2)O stoichiometric surfaces are preferred, consistent with prior studies. Surprisingly, surface-state analyses reveal that the stable surfaces of Li(2)O(2) are half-metallic, despite the fact that Li(2)O(2) is a bulk insulator. Surface oxygens in these facets are ferromagnetic with magnetic moments ranging from 0.2 to 0.5 μ(B). In contrast, the stable surfaces of Li(2)O are insulating and nonmagnetic. The distinct surface properties of these compounds may explain observations of electrochemical reversibility for systems in which Li(2)O(2) is the discharge product and the irreversibility of systems that discharge to Li(2)O. Moreover, the presence of conductive surface pathways in Li(2)O(2) could offset capacity limitations expected to arise from limited electron transport through the bulk.     

Lithium ion,lithium metal,and alternative rechargeable battery technologies: the odyssey for high energy density

Since their market introduction in 1991, lithium ion batteries (LIBs) have developed evolutionary in terms of their specific energies (Wh/kg) and energy densities (Wh/L). Currently, they do not only dominate the small format battery market for portable electronic devices, but have also been successfully implemented as the technology of choice for electromobility as well as for stationary energy storage. Besides LIBs, a variety of different technologically promising battery concepts exists that, depending on the respective technology, might also be suitable for various application purposes. These systems of the “next generation,” the so-called post-lithium ion batteries (PLIBs), such as metal/sulfur, metal/air or metal/oxygen, or “post-lithium technologies” (systems without Li), which are based on alternative single (Na⁺, K⁺) or multivalent ions (Mg²⁺, Ca²⁺), are currently being studied intensively. From today’s point of view, it seems quite clear that there will not only be a single technology for all applications (technology monopoly), but different battery systems, which can be especially suitable or combined for a particular application (technology diversity). In this review, we place the lithium ion technology in a historical context and give insights into the battery technology diversity that evolved during the past decades and which will, in turn, influence future research and development.     

Lithium garnet based free-standing solid polymer composite membrane for rechargeable lithium battery

Electrolytes with high lithium-ion conductivity, better mechanical strength and large electrochemical window are essential for the realization of high-energy density lithium batteries. Polymer electrolytes are gaining interest due to their inherent flexibility and nonflammability over conventional liquid electrolytes. In this work, lithium garnet composite polymer electrolyte membrane (GCPEM) consisting of large molecular weight (W_avg ~?5?×?10⁶) polyethylene oxide (PEO) complexed with lithium perchlorate (LiClO₄) and lithium garnet oxide Li_6.28Al_0.24La₃Zr₂O₁₂ (Al-LLZO) is prepared by solution-casting method. Significant improvement in Li⁺ conductivity for Al-LLZO containing GCPEM is observed compared with the Al-LLZO free polymer membrane. Maximized room temperature (30 °C) Li⁺ conductivity of 4.40?×?10^?4 S cm^?1 and wide electrochemical window (4.5 V) is observed for PEO₈/LiClO₄?+?20 wt% Al-LLZO (GCPEM-20) membrane. The fabricated cell with LiCoO₂ as cathode, metallic lithium as anode and GCPEM-20 as electrolyte membrane delivers an initial charge/discharge capacity of 146 mAh g^?1/142 mAh g^?1 at 25 °C with 0.06 C-rate.     

Vibrational dynamics of amorphous beryllium hydride and lithium beryllium hydrides

The vibrational density of states of amorphous beryllium hydride (a-BeH2) and lithium beryllium hydrides have been studied using inelastic neutron scattering, infrared, and Raman spectroscopies. The positions of the symmetrical (120-180 meV) and antisymmetrical (200-260 meV) Be-H stretching modes and those of the H-Be-H bending mode (50-120 meV) have been determined and the results discussed and compared with recent theoretical calculations. With the addition of lithium to the beryllium hydride network, the vibrational bands are shifted to lower energies, indicating a less rigid network.     

Sol-gel optical nanocomposites: Design and applications

The history and method of producing gel-polymer composites is presented. Tailoring properties, such as density, refractive index, hardness, elastic modulus, compressive strength, abrasion resistance, and modulus of rupture is achieved through controlling the ratio of gel-derived silica to polymer phases. Several different applications of composite technology are presented. Solid-state lasing in dye-doped silica gel-PMMA composites has been recently achieved. The difficulties in generating stable photochromism in gels and gel-derived composites are discussed. Microlens arrays for data reading, employing large gel-polymer spheres, have been developed. In addition, a new flat-screen color display technology, based upon the periodic arrangement of dye-doped microsphere pixels, emitting blue, green and red light, is disclosed for the first time.     

Sol-gel synthesis of nanocomposite materials based on lithium niobate nanocrystals dispersed in a silica glass matrix

With the final goal to obtain thin films containing stoichiometric lithium niobate nanocrystals embedded in an amorphous silica matrix, the synthesis strategy used to set a new inexpensive sol-gel route to prepare nanocomposite materials in the Li₂O-Nb₂O₅-SiO₂ system is reported. In this route, LiNO₃, NbCl₅ and Si(OC₂H₅)₄ were used as starting materials. The gels were annealed at different temperatures and nanocrystals of several phases were formed. Futhermore, by controlling the gel compositions and the synthesis parameters, it was possible to obtain LiNbO₃ as only crystallizing phase. LiNbO₃-SiO₂ nanocomposite thin films on Si-SiO₂ and Al₂O₃ substrates were grown. The LiNbO₃ average size, increasing with the annealing temperature, was 27 nm for a film of composition 10Li₂O-10Nb₂O₅-80SiO₂ heated 2 h at 800 °C. Electrical investigation revealed that the nanocrystals size strongly affects the film conductivity and the occurrence of hysteretic current-voltage curves.     

Dicerium orthosilicate selenide and dicerium orthosilicate telluride,Ce2(SiO4)Q (Q = Se or Te)

The crystal structures of two new quaternary compounds, viz. dicerium orthosilicate selenide and dicerium orthosilicate telluride, Ce₂(SiO₄)Q (Q = Se or Te), have been determined from single‐crystal X‐ray diffraction data. Each structure comprises infinite chains of SiO₄ tetrahedra separated by Ce and Q atoms. The site symmetries are Ce m and 2, Si 2 and Qm. The O atoms are in general positions.     

Lithium bis(oxalate)borate crosslinked polymer electrolytes for high-performance lithium batteries

Solid electrolytes play a vital role in solid-state Li secondary batteries,which are promising high-energy storage devices for new-generation electric vehicles.Nevertheless,obtaining a suitable solid electrolyte by a simple and residue-free preparation process,resulting in a stable interface between electrolyte and electrode,is still a great challenge for practical applications.Herein,we report a self-crosslinked polymer electrolyte(SCPE)for high-performance lithium batteries,prepared by a one-step method based on 3-methoxysilyl-terminated polypropylene glycol(SPPG,a liquid oligomer).It is worth noting that lithium bis(oxalate)borate(Li BOB)can react with SPPG to form a crosslinked structure via a curing reaction.This self-formed polymer electrolyte exhibits excellent properties,including high roomtemperature ionic conductivity(2.6×10^-4 S cm^-1),wide electrochemical window(4.7 V),and high Li ion transference number(0.65).The excellent cycling stability(500 cycles,83%)further highlights the improved interfacial stability after the in situ formation of SCPE on the electrode surface.Moreover,this self-formation strategy enhances the safety of the battery under mechanical deformation.Therefore,the present self-crosslinked polymer electrolyte shows great potential for applications in high-performance lithium batteries.     

锂在非层状硫化物中的电化学嵌入反应I:锂在硫化铅中的嵌入过程

通过库伦滴定、三角波电位扫描和X射线衍射物相分析,研究了Li/PbS电池的阴极反应机理.发现在该电池放电的第一个阶段(放电深度小于1.5),阴极上发生的是锂嵌入硫化铅晶格的反应,并且锂嵌入后硫化铅的主晶格结构基本未变,锂进入了晶体的立方体间隙中心位置.测得锂嵌入硫化铅生成LiPbS的嵌入自由能为-300.48kJ.mol^-^1(25℃),锂在LiyPbS(0相似文献   

Ullmann reaction in tetraethyl orthosilicate: a novel synthesis of triarylamines and diaryl ethers

A novel synthesis of triarylamines and diaryl ethers is reported; a feature of this process is the ligand-free copper-catalysed C-N and C-O bond formation in tetraethyl orthosilicate.