Interaction between polymer and anionic/nonionic surfactants and its mechanism of enhanced oil recovery

Various experimental methods were used to investigate interaction between polymer and anionic/nonionic surfactants and mechanisms of enhanced oil recovery by anionic/nonionic surfactants in the present paper. The complex surfactant molecules are adsorbed in the mixed micelles or aggregates formed by the hydrophobic association of hydrophobic groups of polymers, making the surfactant molecules at oil-water interface reduce and the value of interfacial tension between oil and water increase. A dense spatial network structure is formed by the interaction between the mixed aggregates and hydrophobic groups of the polymer molecular chains, making the hydrodynamic volume of the aggregates and the viscosity of the polymer solution increase. Because of the formation of the mixed adsorption layer at oil and water interface by synergistic effect, ultra-low interfacial tension (～2.0?×?10^?3 mN/m) can be achieved between the novel surfactant system and the oil samples in this paper. Because of hydrophobic interaction, wettability alteration of oil-wet surface was induced by the adsorption of the surfactant system on the solid surface. Moreover, the studied surfactant system had a certain degree of spontaneous emulsification ability (D50?=?25.04?µm) and was well emulsified with crude oil after the mechanical oscillation (D50?=?4.27?µm).     

Drop impact on surfactant films and solutions

Drops impacting on horizontal aqueous surfactant films have been analyzed using a high-speed camera. Drops of either water or aqueous surfactant solutions had a diameter of 2.4?±?0.4 mm and impacted with a velocity of 0.1 to 1.3 m/s. As surfactants, anionic sodium dodecyl sulfate and cationic cetyltrimethyl ammonium bromide were used. Pure water drops impacting on freestanding surfactant films showed coalescence, bouncing, partial bouncing, passing, and partial passing. For bouncing, the concentration of surfactant in the surfactant film must exceed the critical micelle concentration. When surfactant was added to the drop, coalescence and partial passing were suppressed. We attribute the different behavior to different hydrodynamic boundary conditions at the surface of pure water and surfactant solution, leading to different repulsive hydrodynamic forces arising when the air has to flow out of the closing gap between the two liquid surfaces. The boundary condition changes as a function of surfactant concentration from a slip to no-slip, leading to stronger hydrodynamic repulsion. In addition, estimates of the characteristic velocities show that diffusion of air into the water is slow and can only account for the very last thinning of the air gap before coalescence.     

Novel Oil‐in‐Water Emulsions Stabilised by Ionic Surfactant and Similarly Charged Nanoparticles at Very Low Concentrations

Novel oil‐in‐water (O/W) emulsions are prepared which are stabilised by a cationic surfactant in combination with similarly charged alumina nanoparticles at concentrations as low as 10^?5 m and 10^?4 wt %, respectively. The surfactant molecules adsorb at the oil‐water interface to reduce the interfacial tension and endow droplets with charge ensuring electrical repulsion between them, whereas the charged particles are dispersed in the aqueous films between droplets retaining thick lamellae, reducing water drainage and hindering flocculation and coalescence of droplets. This stabilization mechanism is universal as it occurs with different oils (alkanes, aromatic hydrocarbons and triglycerides) and in mixtures of anionic surfactant and negatively charged nanoparticles. Further, such emulsions can be switched between stable and unstable by addition of an equimolar amount of oppositely charged surfactant which forms ion pairs with the original surfactant destroying the repulsion between droplets.     

The aggregation behavior between anionic carboxymethylchitosan and cetyltrimethylammonium bromide: MesoDyn simulation and experiments

The aggregation behavior between carboxymethylchitosan (CMCHS) and cetyltrimethylammonium bromide (CTAB) is investigated by MesoDyn simulation and experimental techniques, for increasing CTAB concentrations. Mixed CMCHS/CTAB bulk aggregates are formed in the solution. Simulation results give the morphologies of aggregates clearly and illustrate the two stages for the formation of aggregates: the first stage is CTAB molecules aggregating on the CMCHS chain and the second stage is the equilibrium stage. A viscosity maximum and a hydrodynamic radius minimum at a certain CTAB concentration reveal the bridging structure of the polymer chains by the micelles. Transmission electron microscopy (TEM) images give the bridging structure clearly. At higher surfactant concentrations, light scattering and TEM show the existence of larger structures, whose size increases with CTAB concentration. According to the simulation and experimental results, the process of aggregate formation and aggregation mechanism are analyzed. Initially CMCHS and CTAB form network structure due to the bridge action of CTAB micelles, while the network structure disappears gradually and is replaced by ellipsoidal CMCHS/CTAB aggregate structure with CTAB concentration increasing.     

Synthesis and aggregation behavior of a hexameric quaternary ammonium surfactant

A star-shaped hexameric quaternary ammonium surfactant (PAHB), bearing six hydrophobic chains and six charged hydrophilic headgroups connected by an amide-type spacer group, was synthesized. The self-assembly behavior of the surfactant in aqueous solution was studied by surface tension, electrical conductivity, isothermal titration microcalorimetry, dynamic light scattering, cryogenic transmission electron microscopy, and NMR techniques. The results reveal that there are two critical aggregate concentrations during the process of aggregation, namely C(1) and C(2). The aggregate transitions are proved to be caused by the changes of the surfactant configuration through hydrophobic interaction among the hydrocarbon chains. Below C(1), PAHB may present a star-shaped molecular configuration due to intramolecular electrostatic repulsion among the charged headgroups, and large aggregates with network-like structure are observed. Between C(1) and C(2), the hydrophobic interaction among the hydrophobic chains may become stronger to make the hydrophobic chains of the PAHB molecules curve back and pack more closely, and then the network-like aggregates transfer to large spherical aggregates of ～100 nm. Beyond C(2), the hydrophobic interaction may become strong enough to cause the PAHB molecular configuration to turn into a pyramid-like shape, resulting in the transition of the spherical large aggregates to spherical micelles of ～10 nm. Interestingly, the PAHB displays high emulsification ability to linear fatty alkyls even at very low concentration.     

Emulsion Ripening through Molecular Exchange at Droplet Contacts

Two coarsening mechanisms of emulsions are well established: droplet coalescence (fusion of two droplets) and Ostwald ripening (molecular exchange through the continuous phase). Here a third mechanism is identified, contact ripening, which operates through molecular exchange upon droplets collisions. A contrast manipulated small‐angle neutron scattering experiment was performed to isolate contact ripening from coalescence and Ostwald ripening. A kinetic study was conducted, using dynamic light scattering and monodisperse nanoemulsions, to obtain the exchange key parameters. Decreasing the concentration or adding ionic repulsions between droplets hinders contact ripening by decreasing the collision frequency. Using long surfactant chains and well‐hydrated heads inhibits contact ripening by hindering fluctuations in the film. Contact ripening can be controlled by these parameters, which is essential for both emulsion formulation and delivery of hydrophobic ingredients.     

Global study of myoglobin-surfactant interactions

Surfactants interact with proteins in multifarious ways which depend on surfactant concentration and structure. To obtain a global overview of this process, we have analyzed the interaction of horse myoglobin (Mb) with an anionic (SDS) and cationic (CTAC) surfactant, using both equilibrium titration techniques and stopped-flow kinetics. Binding and kinetics of conformational changes can be divided into a number of different regions (five below the cmc and one above) with very distinct features (broadly similar between the two surfactants, despite their difference in head group and chain length), which nuance the classical view of biphasic binding prior to micellization. In stage A, fairly weak interactions lead to a linear decrease in thermal stability. This gives way to a more cooperative process in stage B, where aggregates (presumably hemimicelles) start to form on the protein surface, leading to global denaturation (loss of a thermal transition) and biphasic unfolding kinetics. This is consolidated in stage C with titratable surfactant adsorption. Adsorption of this surfactant species leads to significant changes in kinetics, namely, inhibition of unfolding kinetics in CTAC and altered unfolding amplitudes in SDS, though the process is still biphasic in both surfactants. Stage D commences the reduction in exothermic binding signals, leading to further uptake of 5 (SDS) or 31 (CTAC) surfactant molecules without any major changes in protein conformation. In stage E many more surfactant molecules (46 SDS and 39 CTAC) are bound, presumably as quasi-micellar structures, and we observe a very slow unfolding phase in SDS, which disappears as we reach the cmc. Above the cmc, the unfolding rates remain essentially constant in SDS, but increase significantly in CTAC, possibly because binding of bulk micelles removes the inhibition by hemimicellar aggregates. Our work highlights the fascinating richness of conformational changes that proteins can undergo in the presence of molecules with self-assembling properties.     

模拟乳状液中微小液滴间的相互作用力

对商品化的DCAT21表面/界面张力仪进行改造, 用于直接测量液滴间相互作用力, 同时用数码摄像头Digital 3.0观察记录两液滴接近, 挤压, 排液, 聚并等过程. 研究发现, 溶液中微小液滴间的相互作用力随距离的变化曲线能够提供分散液滴的行为特征信息: 曲线上不同阶段的斜率反映力的大小; 从液滴接触后到聚并前的挤压距离反映液滴的稳定性. 表面活性剂种类不同, 对两液滴聚并所起的稳定作用不同, 非离子表面活性剂具有较好的稳定作用. 溶液中聚合物分子在薄液膜中形成具有一定强度的层状结构, 阻碍液滴聚并, 受力曲线呈阶梯状.     

Exchange of matter at the interface between two liquid phases

Theoretical models of the exchange of matter at interfaces are necessary to interpret relaxation phenomena in surfactant adsorption layers. For liquid-liquid systems, the diffusion-controlled exchanges of surfactant molecules at the interfaces can be influenced by a simultaneous transfer of molecules from one bulk phase to the other. The diffusional mass exchange function is derived taking into account the transfer across the interface. The resulting mass exchange function is used to calculate the interfacial tension response of a liquid-liquid system. As an example, the interfacial response after a ramp-type area perturbation is calculated.     

Gemini表面活性剂对疏水缔合聚丙烯酰胺界面吸附膜扩张流变性质的影响

采用小幅低频振荡和界面张力弛豫技术, 考察了疏水缔合水溶性聚丙烯酰胺(HMPAM)在正癸烷-水界面上的扩张黏弹性质, 研究了不对称Gemini表面活性剂C₁₂COONa-p-C₉SO₃Na对其界面扩张性质的影响. 研究发现, 疏水链段的存在, 使HMPAM在界面层中具有较快的弛豫过程, 扩张弹性显示出明显的频率依赖性. 表面活性剂分子可以通过疏水相互作用与聚合物的疏水嵌段在界面上形成类似于混合胶束的特殊聚集体. 表面活性剂分子与界面聚集体之间存在快速交换过程, 可以大大降低聚合物的扩张弹性. 同时, 聚合物分子链能够削弱表面活性剂分子长烷基链之间的强相互作用, 导致混合吸附膜的扩张弹性远低于单独表面活性剂吸附膜.     

Influence of Oleic Acid and Electrolyte on the Interfacial Dilational Properties of Surfactant/Polymer Systems at the Decane-Water Interface

The dilational properties of partly hydrolyzed polyacrylamide (HPAM) and 4,5-diheptyl-2-propylbenzene sulfonate (377) mixed systems in the absence or presence of electrolyte or oleic acid at the oil-water interface have been described by means of the oscillating barriers method and the interfacial tension relaxation method. The polymer plays different roles in influencing the nature of polymer-surfactant adsorbed layers at different surfactant concentrations. At low surfactant concentration, the addition of polymer perhaps weakens the “entanglement” of long alkyl chains, which decreases strikingly the dilational modulus of the adsorbed layer. At high surfactant concentration, the addition of the polymer increases the dilational modulus due to the hydrophobic interactions between polymer and surfactant molecules. On the case of adding electrolyte, the frequency dependence of dilational modulus increases due to the enhancement of exchange process of surfactant molecules and bivalent cation has more obvious effect than Na ion. Oleic acid plays dual roles in controlling interfacial dilational properties of mixed adsorption films: a small quantity of oleic acid increases the dilational modulus by forming densely packed mixed adsorption layer with surfactant molecules, while the superfluous addition of oleic acid could decrease the dilational modulus mainly due to the weakening of the “entanglement” among long alkyl chains in surfactant molecules.     

界面流变性质对小液滴聚并过程的影响

对表面活性剂溶液中两个小液滴的聚并现象进行理论分析，并考虑相界面上质量传递对该过程的影响，得到聚并时间与界而张力和界面张力梯度、界面粘度、表面活性剂界面扩散系数、连续相和分散相的主体性质、范德华力及液滴半径的关系．     

Synergistic stabilization of emulsions by a mixture of surface-active nanoparticles and surfactant

The stability and rheology of tricaprylin oil-in-water emulsions containing a mixture of surface-active hydrophilic silica nanoparticles and pure nonionic surfactant molecules are reported and compared with those of emulsions stabilized by each emulsifier alone. The importance of the preparation protocol is highlighted. Addition of particles to a surfactant-stabilized emulsion results in the appearance of a small population of large drops due to coalescence, possibly by bridging of adsorbed particles. Addition of surfactant to a particle-stabilized emulsion surprisingly led to increased coalescence too, although the resistance to creaming increased mainly due to an increase in viscosity. Simultaneous emulsification of particles and surfactant led to synergistic stabilization at intermediate concentrations of surfactant; emulsions completely stable to both creaming and coalescence exist at low overall emulsifier concentration. Using the adsorption isotherm of surfactant on particles and the viscosity and optical density of aqueous particle dispersions, we show that the most stable emulsions are formed from dispersions of flocculated, partially hydrophobic particles. From equilibrium contact angle and oil-water interfacial tension measurements, the calculated free energy of adsorption E of a silica particle to the oil-water interface passes through a maximum with respect to surfactant concentration, in line with the emulsion stability optimum. This results from a competition between the influence of particle hydrophobicity and interfacial tension on the magnitude of E.     

Adsorption of fluorescent R6G dye into organophilic C12TMA laponite films

The absorption and fluorescence properties of rhodamine 6G (R6G) in organophilic laponite (Lap) clay films are studied. For this purpose, organo-Lap clays are synthesized by the incorporation of dodecyltrimethylammonium (C12TMA) as surfactant into the interlayer space of Lap clays. Two organo-Lap clays are prepared: one with moderate surfactant content (around 70% of the total cation-exchange capacity (CEC) of the clay) and a second with a high surfactant loading (about 130% CEC). Supported films are elaborated by the spin-coating technique and characterized by several techniques such as atomic force microscopy, elemental CHN analysis, X-ray diffraction, and thermogravimetry. IR spectroscopy reveals that the intercalation of R6G into organo-Lap films takes place at the detriment of the adsorbed C12TMA molecules. The photophysical properties of R6G monomers in the interlayer space of Lap films are improved by the presence of surfactant molecules. Moreover, organophilic environments can reduce the dye aggregation and favor the formation of fluorescent J-type aggregates, enhancing the fluorescence ability of dye/clay films with high dye contents. This improvement depends on the surfactant content.     

Adsorption of octadecyltrimethylammonium chloride and adsolubilization on to cellulosic fibers

The coadsorption of different organic solutes on cellulosic fibers treated with octadecyltrimethylammonium chloride (ODTMA) has been studied. In the absence of ODTMA cellulosic fibers had little tendency to retain organic compounds. The enhanced solute incorporation was ascribed to the adsolubilization of these compounds on the aggregated domains of the adsorbed surfactant molecules at the solid/liquid interface. The specific shape of solute coadsorption isotherms indicated that the adsolubilization process may be regarded as a partition phenomenon between the aqueous bulk phase and the adsorbed surfactant aggregates. The decrease in solute uptake at the cellulose/water interface above the CMC of ODTMA was ascribed to micelle formation in the bulk solution and to the ensuing micellar solubilization of organic solutes. Preliminary experiments performed using vertical fixed bed columns showed that modified cellulosic fibers can be conveniently used as substrate for treating organic pollutants.     

Steric repulsion between internal aqueous droplets and the external aqueous phase in double emulsions

A theoretical model for analyzing the steric repulsion energy between internal aqueous droplets and the external aqueous phase in double emulsions, which results from the steric interaction between the surfactant molecules adsorbed at the two interfaces, has been established. The steric interaction is dependent on the separation distance between the internal aqueous droplets and the external aqueous phase, the thicknesses of the two adsorbed surfactant layers, and the size of the internal aqueous droplets and the oil globules, all of which determine the extent of the compression of the adsorbed surfactant molecules. The thickness of each of the two surfactant layers have the same effect on the steric repulsion, and stronger steric interaction can be achieved with thicker adsorbed layers, which can effectively prevent coalescence between the internal aqueous droplets and the external aqueous phase. Increasing the internal aqueous droplet size can produce stronger steric repulsion; however, larger oil globules will weaken the steric repulsion, indicating that a more stable double-emulsion system can be achieved by preparing the system with smaller oil globules and larger internal aqueous droplets.     

The Fast Relaxation Process between Hydrophobically Modified Associating Polyacrylamide and Different Surfactants at the Water‐Octane Interface

In our previous work (Macromolecules 2004, 37:2930), we found that the hydrophobic blocks of polyacrylamide modified with 2‐phenoxylethyl acrylate (POEA) and anionic surfactant sodium dodecyl sulfate (SDS) may form mixed associations at octane/water interface. However, the process involving the exchange of surfactant molecules between monomers and mixed associations in interface is so fast that we cannot obtain its characteristic time. In this article, the interfacial dilational viscoelastic properties of another hydrophobically associating block copolymer composed of acrylamide (AM) and a low amount of 2‐ethylhexyl acrylate (EHA) (<1.0 mol%) at the octane‐water interfaces were investigated by means of oscillating barriers method and interfacial tension relaxation method respectively. The influences of anionic surfactant SDS and nonionic surfactant Triton X‐100 on the dilational viscoelastic properties of 7000 ppm polymer solutions were studied. The results showed that the interaction between P(AM/2‐EHA) and SDS was similar to that of P(AM/POEA) and SDS. Moreover, we got the relaxation characteristic time of the fast process involving the exchange of s Triton X‐100 molecules between monomers and mixed associations.

We also found that the interfacial tension response of hydrophobically associating water‐soluble copolymers to the sinusoidal oscillation of interfacial area at low bulk concentration is as same as that of the typical surfactants: the interfacial tension decreases with the decrease of interfacial area because of the increase of interfacial active components. However, the interfacial tension increases with the decrease of interfacial area at 7000 ppm P(AM/2‐EHA), which is believed to be correlative with the structure of absorbed film. The results of another hydrophobically associating polymer P(AM/POEA) and polyelectrolyte polystyrene sulfonate (PSS) enhanced our supposition. The phase difference between area oscillation and tension oscillation has also been discussed considering the apparent negative value.     

Molecular mechanism and thermodynamics study of plasmid DNA and cationic surfactants interactions

The molecular mechanism and thermodynamics of the interactions between plasmid DNA and cationic surfactants were investigated by isothermal titration calorimetry (ITC), dynamic light scattering, surface tension measurements, and UV spectroscopy. The cationic surfactants studied include benzyldimethyldodecylammonium chloride, benzyldimethyltetradecylammonium chloride, cetylpyridinium chloride, and cetyltrimethylammonium chloride. The results indicate a critical aggregation concentration (cac) of a surfactant: above the cac the surfactant forms aggregates with plasmid DNA; below the cac, however, there is no detectable interaction between DNA and surfactant. Surfactants with longer hydrocarbon chains have smaller cac, indicating that hydrophobic interaction plays a key role in DNA-surfactant complexation. Moreover, an increase in ionic strength (I) increases the cac but decreases the critical micellization concentration (cmc). These opposite effects lead to a critical ionic strength (I(c)) at which cac = cmc; when I < I(c), cac < cmc; when I > I(c), DNA does not form complexes with surfactant micelles. In the interaction DNA exhibits a pseudophase property as the cac is a constant over a wide range of DNA concentrations. ITC data showed that the reaction is solely driven by entropy because both deltaH(o) (approximately 2-6 kJ mol(-1)) and deltaS(o) (approximately 70-110 J K(-1) mol(-1)) have positive values. In the complex, the molar ratio of DNA phosphate to surfactant is in the range of 0.63-1.05. The reaction forms sub-micrometer-sized primary particles; those aggregate at high surfactant concentrations. Taken together, the results led to an inference that there is no interaction between surfactant monomers and DNA molecules and demonstrated that DNA-cationic surfactant interactions are mediated by the hydrophobic interactions of surfactant molecules and counterion binding of DNA phosphates to the cationic surfactant aggregates.