Interaction of copper(II) and palladium(II) with linked 2,2′-dipyridylamine derivatives: Synthetic and structural studies

Interaction of copper(II) salts with 2,2′-dipyridylamine (1), N-cyclohexylmethyl-2,2′-dipyridylamine (2), di-2-pyridylaminomethylbenzene (3), 1,2-bis(di-2-pyridylaminomethyl)-benzene (4), 1,3-bis(di-2-pyridylaminomethyl)benzene (5), 1,4-bis(di-2-pyridylaminomethyl)benzene (6), 1,3,5-tris(di-2-pyridylaminomethyl)benzene (7) and 1,2,4,5-tetrakis(di-2-pyridylaminomethyl)benzene (8) has yielded the following complexes: [Cu(2)(μ-Cl)Cl]₂, [Cu(3)(μ-Cl)Cl]₂ · H₂O, [Cu₂(4)(NO₃)₄], [Cu₂(5)(NO₃)₄] · 2CH₃OH, [Cu₂(6)(CH₃OH)₂(NO₃)₄], [Cu₄(8)](NO₃)₄] · 4H₂O while complexation of palladium(II) with 1, 4, 5 and 6 gave [Pd(1)₂](PF₆)₂ · 2CH₃OH, [Pd₂(4)Cl₄], [Pd₂(4)(OAc)₄], [Pd₂(5)Cl₄], [Pd₂(6)Cl₄] and [Pd₂(6)(OAc)₄] · CH₂Cl₂, respectively. X-ray structures of [Cu(2)(μ-Cl)Cl]₂, [Cu(3)(μ-Cl)Cl]₂ · 2C₂H₅OH, [Cu₂(6)(CH₃OH)₂(NO₃)₄], [Pd(1)₂](PF₆)₂ · 2CH₃OH, [Pd₂(4)(OAc)₄] · 4H₂O and [Pd₂(6)(OAc)₄] · 2CH₂Cl₂ are reported. In part, the inherent flexibility of the respective ligands has resulted in the adoption of a diverse range of coordination geometries and lattice arrangements, with the structures of [Pd₂(4)(OAc)₄] · 4H₂O and [Pd₂(6)(OAc)₄] · 2CH₂Cl₂, incorporating the isomeric ligands 4 and 6, showing some common features. Liquid–liquid (H₂O/CHCl₃) extraction experiments involving copper(II) and 1–3, 5, 7and 8 show that the degree of extraction depends markedly on the number of dpa-subunits (and concomitant lipophilicity) of the ligand employed with the tetrakis-dpa derivative 8 acting as the most efficient extractant of the six ligand systems investigated.     

Five-membered ring chelate complexes of Ni(II), Pd(II) and Pt(II) derived of di-(2-pyridyl)-N-ethylimine

Cis-diaquobis{di-(2-pyridyl)-N-ethylimine}nickel(II) chloride (2) was obtained from the reaction of di-(2-pyridyl)-N-ethylimine (1) and [NiCl₂dppe] [dppe = cis-1,2-bis(diphenylphosphino)ethylene] in a 2:1 ratio in hot acetonitrile. Cis-dichloro{di-(2-pyridyl)-N-ethylimine}palladium(II) (3) and cis-dichloro{di-(2-pyridyl)-N-ethylimine}platinum(II) (4) complexes were obtained from the reaction of MCl₂ (M = Pd, Pt) and (1) in equimolar ratio in hot acetonitrile. Compounds 1–4 were characterized by IR spectroscopy, elemental analysis, and mass spectrometry; the complexes 3 and 4 were characterized in solution by NMR. In addition, solid state structures of compounds 1–4 were determined using single crystal X-ray diffraction analyses. X-ray diffraction data of the complexes 3 and 4 showed a distorted square planar local geometry at palladium and platinum atoms with the chlorine atoms in a cis-coordination; in 2 a local octahedral geometry at nickel atom was observed. Complexes 3 and 4 are arranged as dimers with a M?M distance of 3.4567(4) Å (M = Pd) and 3.4221(4) Å (M = Pt), respectively; 2 consists of units linked by intermolecular hydrogen bonding.     

Novel thiocyanate complexes of cadmium(II) - Synthesis, spectroscopic characterization, X-ray studies and DFT calculations

Three novel thiocyanate cadmium(II) compounds [Cd(ind)₂(SCN)₂]_n (1), [Cd(dpa)Cl(SCN)]_n (2) and [Cd(terpy)(SCN)₂] (3) were synthesized and characterized by spectroscopic and crystallographic methods. Thiocyanate ions of 1 act as bridging ligands generating a one-dimensional chain constructed of Cd(SCN)₂Cd units and expanding along the crystallographic direction [1 0 0]. The Cd(II) ions of 2 are bridged by alternating di-μ-Cl and di-μ_1,3-NCS bridges to one-dimensional chain running along the crystallographic direction [0 1 0]. [Cd(terpy)(SCN)₂] (3) is a square pyramidal mononuclear compound.The fluorescence properties of the complexes 1 and 2 were examined in solid state, whereas fluorescence spectra of 3 were recorded in both solid state and solution. All they were compared with the fluorescence properties of the free ligands. Additionally, the electronic spectrum of 3 were investigated at the TDDFT level employing B3LYP functional in combination with LANL2DZ.     

Synthesis of di-, tri-, tetra- and pentacyclic arene complexes of ruthenium(II):[Ru(η-polycyclic arene)-(1-5-η-cyclooctadienyl)]PF6 and their reactions with NaBH4

The phenanthrene complex of ruthenium(II), [Ru(η⁶-phenanthrene)(1,5-η⁵-cyclooctadienyl)]PF₆ (2c), is prepared by the reaction of Ru(η⁴-1,5-COD)(η⁶-1,3,5-COT) (1) with phenanthrene and HPF₆ in 65% yield. Similar treatments with di- tri-, tetra- and pentacyclic arenes give corresponding polycyclic arene complexes, [Ru(η⁶-polycyclic arene)(1-5-η⁵-cyclooctadienyl)]PF₆ [polycyclic arene = naphthalene (2b), anthracene (2d), triphenylene (2e), pyrene (2f) and perylene (2g)] in 46-90% yields. The molecular structure of the perylene complex 2g is characterized by X-ray crystallography. Reaction of 2c with NaBH₄ gives a mixture of the 1,5- and 1,4-COD complexes of ruthenium(0), Ru(η⁶-phenanthrene)(η⁴-1,5-COD) (3c) and Ru(η⁶-phenanthrene)(η⁴-1,4-COD) (4c) in 76% in 1:8 molar ratio. The arene exchange reactions among cationic complexes [Ru(η⁶-arene)(1-5-η⁵-cyclooctadienyl)]PF₆ (2) showed the coordination ability of arenes in the following order: benzene ∼ triphenylene > phenanthrene > naphthalene > perylene ∼ pyrene > anthracene, suggesting the benzo fused rings, particularly those of acenes, decreasing thermal stability of the arene complex.     

Synthesis of novel calix[4]arenes containing organosilicon groups

Metalation of (RSiMe₂)₃CH (1a R = H, 1b R = Me, 1c R = Ph) with lithium diisopropylamide (LDA) or methyllithium in THF gave organolithium reagents (RSiMe₂)₃CLi, which reacted with the formylated calixarene (2), to give the corresponding 5,17-bis[2,2-bis(organosilyl)-1-ethenyl]-25,26,27,28-tetrapropoxycalix[4]arenes (3a, 3b and 3c) via the Peterson olefination. The compounds (RSiMe₂)₃CLi were treated with 25,26,27,28-tetrakis(4-bromobutoxy)calix[4]arene (4) to give 25,26,27,28-tetrakis[4-(tris(dimethylsilyl)methyl)butoxy] calix[4]arene (5a) and 25,26,27,28-tetrakis[4-(tris(trimethylsilyl)methyl)butoxy] calix[4]arene (5b) via nucleophilic substitution reactions. However the compound 25,26,27,28-tetrakis[4-(tris(dimethylphenylsilyl)methyl)butoxy] calix[4]arene (5c) was not obtained, presumably because (PhSiMe₂)₃C- is highly sterically hindered and the reactivity of its derivatives is low. The compound 5a has potential as a core for dendrimers.     

Six-membered ring chelate complexes of Pd(II) and Pt(II) derived from di-(2-pyridyl)pyrimidin-2-ylsulfanylmethane

Cis-[MLCl₂] complexes of di-(2-pyridyl)pyrimidin-2-ylsulfanylmethane ligand (L), where M = Pd (1), and M = Pt (2) have been synthesized. Reaction of 1 with L in presence of Na[BF₄] and hot acetonitrile produced the complex [PdL₂](BF₄)₂ (3). Complexes 1-3 and ligand L have been characterized by elemental analyses, IR and NMR spectroscopy. Crystal structures of 1, 3 and L were determined by single crystal X-ray diffraction analyses, showing nonplanar structures with the pyridinic rings twisted around the bridging carbon and the ipso carbon bonds. 1 and 3 displayed a bidentate coordination of L to the palladium atom with the formation of six-membered chelate rings, where the local geometry at palladium atom was distorted square planar. In 3 the palladium atom was coordinated to two dipyridyl ligands through two of the pyridinic nitrogen atoms to form a cationic complex stabilized by two tetrafluoroborate counter-ions.     

Structural characterization of five-coordinate copper(II), nickel(II), and cobalt(II) thiocyanato complexes derived from bis(2-(3,5-dimethyl-1-pyrazolyl)ethyl)amine

The reaction of M(ClO₄)₂·6H₂O with NH₄NCS in presence of the organic sterically hindered bis(2-(di-3,5-dimethyl-1-pyrazolyl)ethyl)amine (bedmpza) afforded the five-coordinate mononuclear dithiocyanato-M(II) complexes [M(bedmpza)(NCS)₂]·xMeOH (1: M = Cu²⁺, x = 0; 2: M = Ni²⁺, x = 0; 3: M = Co²⁺, x = 0.84). The compounds which proved to be non-electrolytes were characterized by IR and UV-Vis spectroscopy and their molecular structures were determined by single-crystal X-ray crystallography. In these complexes, the five-coordinate geometry was achieved by the three N-donors of the ligand bedmpza and two N atoms of the terminal thiocyanato ligands. The Cu(II) complex exists in two polymorphs 1-I and 1-II: an intermediate five-coordinate geometry with the two thiocyanato ligands are arranged as cisoid in 1-I and distorted square pyramidal geometry with the thiocyanato ligands are in transoid orientation in 1-II. Although the later geometry was also observed in the nickel complex 2, distorted trigonal bipyramidal geometry was found in 3. Each complex forms hydrogen bonds of type N-H?S from the secondary amine N(3) donor atoms to the adjacent terminal S(1) acceptor atoms of the thiocyanate group. The thermal behavior of the two polymorphs 1-I and 1-II were similar and no significant differences were observed between the two complexes.     

Syntheses,structures and hydrolytic properties of copper(II) complexes of asymmetrically N-functionalised 1,4,7-triazacyclononane ligands

A series of new asymmetrically N-substituted derivatives of the 1,4,7-triazacyclononane (tacn) macrocycle have been prepared from the common precursor 1,4,7-triazatricyclo[5.2.1.0^4,10]decane: 1-ethyl-4-isopropyl-1,4,7-triazacyclononane (L1), 1-isopropyl-4-propyl-1,4,7-triazacyclononane (L2), 1-(3-aminopropyl)-4-benzyl-7-isopropyl-1,4,7-triazacyclononane (L3), 1-benzyl-4-isopropyl-1,4,7-triazacyclononane (L4) and 1,4-bis(3-aminopropyl)-7-isopropyl-1,4,7-triazacyclononane (L5). The corresponding monomeric copper(II) complexes were synthesised and were found to be of composition: [Cu(L1)Cl₂] · 1/2 H₂O (C1), [Cu(L4)Cl₂] · 4H₂O (C2), [Cu(L3)(MeCN)](ClO₄)₂ (C3), [Cu(L5)](ClO₄)₂ · MeCN · NaClO₄ (C4) and [Cu(L2)Cl₂] · 1/2 H₂O (C5). The X-ray crystal structures of each complex revealed a distorted square-pyramidal copper(II) geometry, with the nitrogen donors on the ligands occupying 3 (C1 and C2), 4 (C3) or 5 (C4) coordination sites on the Cu(II) centre. The metal complexes were tested for the ability to hydrolytically cleave phosphate esters at near physiological conditions, using the model phosphodiester, bis(p-nitrophenyl)phosphate (BNPP). The observed rate constants for BNPP cleavage followed the order k_C1 ≈ k_C2 > k_C5 ? k_C3 > k_C4, confirming that tacn-type Cu(II) complexes efficiently accelerate phosphate ester hydrolysis by being able to bind phosphate esters and also form the nucleophile necessary to carry out intramolecular cleavage. Complexes C1 and C2, featuring asymmetrically disubstituted ligands, exhibited rate constants of the same order of magnitude as those reported for the Cu(II) complexes of symmetrically tri-N-alkylated tacn ligands (k ∼ 1.5 × 10⁻⁵ s⁻¹).     

Dimolybdenum complexes containing anions of N,N′-bis(pyrimidine-2-yl)formamidine and N-(2-pyrimidinyl)formamide

The reactions of Mo₂(O₂CCH₃)₄ with different equivalents of N,N′-bis(pyrimidine-2-yl)formamidine (HL1) and N-(2-pyrimidinyl)formamide (HL2) afforded dimolybdenum complexes of the types Mo₂(O₂CCH₃)(L1)₂(L2) (1) trans-Mo₂(L1)₂(L2)₂ (2) cis-Mo₂(L1)₂(L2)₂ (3) and Mo₂(L2)₄ (4). Their UV–Vis and NMR spectra have been recorded and their structures determined by X-ray crystallography. Complexes 2 and 3 establish the first pair of trans and cis forms of dimolybdenum complexes containing formamidinate ligands. The L1 ligands in 1–3 are bridged to the metal centers through two central amine nitrogen atoms, while the L2 ligands in 1–4 are bridged to the metal centers via one pyrimidyl nitrogen atom and the amine nitrogen atom. The Mo–Mo distances of complexes 1 [2.0951(17) Å], 2 [2.103(1) Å] and 3 [2.1017(3) Å], which contain both Mo?N and Mo?O axial interactions, are slightly longer than those of complex 4 [2.0826(12)–2.0866(10) Å] which has only Mo?O interactions.     

Synthesis and photophysicochemical properties of novel mononuclear rhodium(III) phthalocyanines

Chloro axially-substituted octa(4-isopropylphenoxy)rhodium(III)phthalocyanine, (R)₈PcRhCl (3), was reacted with the nitrogenous bases pyridine (Py) and pyrazine (Pyz) to give the axially-disubstituted octa(4-isopropylphenoxy)rhodium(III)phthalocyanines [(R)₈PcRhCl(L)] (4) and (5), L = (Py) and (Pyz), respectively. In this study, the fluorescence quantum yield (Φ_F), the phosphorescence quantum yield (Φ_phos) and the photodegradation quantum yield (Φ_pd) values for the newly synthesized rhodium phthalocyanine complexes (RhPcs) 4 and 5 are reported. The complexes have also been fully characterized by elemental analysis, FD mass spectrometry, FT-IR and ¹H NMR spectroscopy.     

Syntheses, structures and ligand conformations of Cu(II), Co(II) and Ag(I) complexes containing the phosphinic amide ligands

The syntheses, structures and ligand conformations of the complexes trans-Cu(L1)₂(ClO₄)₂, (L1 = N-(2-pyrimidinyl)-P,P-diphenyl-phosphinic amide), 1, [trans-Co(L1)₂(CH₃OH)₂](ClO₄)₂·O(C₂H₅)₂, 2, [trans-Co(L2)₂(H₂O)₂](ClO₄)₂·2CH₃OH, (L2 = N-(2-pyridinyl)-P,P-diphenyl-phosphinic amide), 3, [cis-Co(L2)₂(NO₃)](NO₃), 4, and [Ag(L3)(NO₃)(CH₃CN)]_∞, (L3 = N-(6-methyl-2-pyridinyl)-P,P-diphenyl-phosphinic amide), 5, are reported. The L1 and L2 ligands in the monomeric complexes 1-4 chelate the metal centers through the pyrimidyl/pyridyl nitrogen atoms and the phosphinic amide oxygen atoms, whereas the L3 ligands in complex 5 bridge the metal centers, forming a 1-D zigzag chain. The chelating L2 ligands in complexes 3 and 4 adopt cis conformations and the bridging L3 ligand in complex 5 adopts a trans conformation, respectively.     

Palladium and platinum complexes of chiral and achiral calix[4]arene bisphosphite ligands

Chiral and achiral p-tert-butyl-calix[4]arene bisphosphites (L¹–L³) have been synthesized by the reaction of p-tert-butyl-calix[4]arene and the phosphorodichloridites, ROPCl₂ [R = (1S,2R,5R)-(+)-iso-menthyl (L¹), (1R,2S,5R)-(−)-menthyl (L²) or C₆H₄Bu^t-4 (L³)]. These bisphosphites function as chelating ligands in palladium(II) and platinum(II) complexes which are formed in good yields by the reaction of PdCl₂(PhCN)₂, MCl₂(COD) (M = Pd or Pt) or PdMeCl(COD) with the respective calix[4]arene bisphosphite. Single crystal X-ray diffraction studies performed on the complexes [PdCl₂(L¹)], [PdCl₂(L²)], [PdCl₂(L³)] and [PtCl₂(L³)] reveal a near square planar geometry around the metal with the two chloride ligands in a cis disposition. The crystal packing in the complexes [PdCl₂(L¹)] and [PdCl₂(L²)], which crystallize in the chiral (P6₁22) space group, shows different hydrophobic channels with intermolecular C–H?Cl hydrogen bonding. The complexes [PdCl₂(L³)] and [PtCl₂(L³)] are isostructural and the molecules in the crystal lattice are linked by intermolecular C–H?Cl and C–H?O hydrogen bonds.     

Intermolecular complexation thermodynamics between water-soluble calix[4]arenes and diazacycloalkanes

Calorimetric titration experiments have been performed in pH 2.0 and 7.2 phosphate buffer solutions at 298.15 K to calculate the complex stability constants (K_S) and thermodynamic parameters (ΔG°, ΔH°, and TΔS°) for the stoichiometric 1:1 inclusion complexation of water-soluble calix[4]arene tetrasulfonate (CAS) and thiacalix[4]arene tetrasulfonate (TCAS) with some diazacycloalkane guests, i.e. piperazine (1), homopiperazine (2) and 1,5-diazacyclooctane (3). The results indicated that complexes of CAS and TCAS with diazacycloalkane guests were enthalpy-stabilized, and an acidic environment was more favorable to host-guest complexation than a neutral one. CAS forms more stable complexes with guest molecules than TCAS due to the more favorable enthalpic gain.     

New copper(II) 1D polymer containing dimethyl(phenylsulfonyl)amidophosphate: Synthesis,crystal structure and magnetic properties

The reaction of sodium dimethyl(phenylsulfonyl)amidophosphate NaL (HL = C₆H₅SO₂NHP(O)(OCH₃)₂) with Cu(NO₃)₂ · 6H₂O and o-bpe (1,2-bis(pyridine-2-yl)ethane) in appropriate ratios, afford the formation of 1D coordination polymer [Cu(L)₂ · o-bpe]_n in good yield. The crystal structures of HL (1) and [Cu(L)₂ · o-bpe]_n (2) are reported. In the crystal package the molecules of 1 are linked by intermolecular hydrogen bonds formed by the phosphoryl oxygen atoms which serve as acceptors and nitrogen atoms of amide groups as donors. The crystal structure of 2 indicates the presence of unsaturated Cu(L)₂ unit bridged by o-bpe ligand in the one-dimensional polymeric chain. The Cu(II) atoms have distorted 4 + 2 octahedral CuO₄N₂ environment formed by the oxygen atoms belonging to the sulfonyl and phosphoryl groups of two deprotonated chelate ligands and nitrogen atoms of the bridging o-bpe ligands.     

Synthesis and structural characterization of rac-2-[(diphenylphosphino)methyl]ferrocenecarboxylic acid, its selected derivatives and some rhodium complexes

rac-2-[(Diphenylphosphino)methyl]ferrocenecarboxylic acid (1) was prepared in a good yield from rac-2-(N,N-dimethylaminomethyl)bromoferrocene (2) via rac-2-(hydroxymethyl)bromoferrocene (4) and rac-2-[(diphenylphosphino)methyl]bromoferrocene (5), and further converted to the respective phosphine oxide (6), phosphine sulfide (7) and methyl ester (8). The phosphines 1 and 8 were studied as ligands in rhodium complexes. The reaction of di-μ-chloro-bis[chloro-(η⁵-pentamethylcyclopentadienyl)rhodium(III)] with the stoichiometric amounts of 1 and 8 yielded the corresponding mononuclear complexes with P-monodentate ligands: [RhC₂(η⁵-C₅Me₅)(L-κP)], 9 and 10, respectively. Attempted deprotonation of 9 with LiBu or KOt-Bu gave intractable mixtures, in which the parent complex 9 as the major component was accompanied by two new compounds, likely the diastereoizomeric phosphinocarboxylate complexes. A defined O,P-chelating phosphinocarboxylate complex, [SP-4-2]-carbonyl-[rac-2-{(diphenylphosphino)methyl}ferrocenecarboxylato-κ²O,P]-tricyclohexylphosphinerhodium(I) (12), was obtained from the displacement of acetylacetonate(1−) (acac) ligand in [Rh(acac)(CO)(PCy₃)] (Cy = cyclohexyl) with acid 1. The structures of 1, 6 · CHCl₃, and 7 · 1/2 CH₂Cl₂, 10, and hydrated complexes 9 and 12 were determined by single-crystal X-ray diffraction.     

Synthesis, photophysical and electrophosphorescent properties of mononuclear Pt(II) complexes with arylamine functionalized cyclometalating ligands

Four cyclometalated Pt(II) complexes, i.e., [(L²)PtCl] (1b), [(L³)PtCl] (1c), [(L²)PtCCC₆H₅] (2b) and [(L³)PtCCC₆H₅] (2c) (HL² = 4-[p-(N-butyl-N-phenyl)anilino]-6-phenyl-2,2′-bipyridine and HL³ = 4-[p-(N,N′-dibutyl-N′-phenyl)phenylene-diamino]-phenyl-6-phenyl-2,2′-bipyridine), have been synthesized and verified by ¹H NMR, ¹³C NMR and X-ray crystallography. Unlike previously reported complexes [(L¹)PtCl] (1a) and [(L¹)PtCCC₆H₅] (2a) (HL¹ = 4,6-diphenyl-2,2′-bipyridine), intense and continuous absorption bands in the region of 300-500 nm with strong metal-to-ligand charge transfer (¹MLCT) (dπ(Pt) → π^∗(L)) transitions (ε ∼ 2 × 10⁴ dm³ mol⁻¹ cm⁻¹) at 449-467 nm were observed in the UV-Vis absorption spectra of complexes 1b, 1c, 2b and 2c. Meanwhile, with the introduction of electron-donating arylamino groups in the ligands of 1a and 2a, complexes 1b and 2b display stronger phosphorescence in CH₂Cl₂ solutions at room temperature with bathochromically shifted emission maxima at 595 and 600 nm, relatively higher quantum yields of 0.11 and 0.26, and much longer lifetimes of 8.4 and 4.5 μs, respectively. An electrochromic film of 1b-based polymer was obtained on Pt or ITO electrode surface, which suggests an efficient oxidative polymerization behavior. An orange multilayer organic light-emitting diode with 1b as phosphorescent dopant was fabricated, achieving a maximum current efficiency of 11.3 cd A⁻¹ and a maximum external efficiency of 5.7%. The luminescent properties of complexes 1c and 2c are dependent on pH value and solvent polarity, which is attributed to the protonation of arylamino units in the C^N^N cyclometalating ligands.     

Mercury thiocyanate coordination polymers generated from rigid or flexible organic nitrogen donor-based ligands

Four mercury(II) thiocyanate–organic polymeric complexes, [Hg(μ-4,4-bipy)(SCN)₂]_n (1), [Hg(μ-bpa)(SCN)₂]_n (2), [Hg(μ-bpe)(SCN)₂]_n (3), [Hg(μ-bpp)(SCN)₂]_n (4) {4,4-bipy = 4,4′-bipyridine, bpa = 1,2-bis(4-pyridyl)ethane, bpe = 1,2-bis(4-pyridyl)ethene and bpp = 1,3-di(4-pyridyl)propane} were prepared from reactions of mercury(II) thiocyanate with four rigid and flexible organic nitrogen donor-based ligands under thermal gradient conditions, brunched tube method. All these compounds were structurally determined by X-ray single-crystal diffraction. The thermal stabilities of compounds 1–4 were studied by thermal gravimetric (TG) and differential thermal analyses (DTA). Solid state luminescent spectra of compounds 1 and 3 indicate intense fluorescent emissions at 430 and 468 nm, respectively.     

Infinite chains constructed from flexible bis(benzimidazole)-based ligands

Two neutral ligands, L¹ · 2H₂O and L² · H₂O, and seven complexes, [Cu(pmb)₂(L¹)] (1), [Cu(pmb)₂(L²)] (2), [Cu(Ac)₂(L²)] · 4H₂O (3), [Cu(4-aba)₂(L²)] (4), [Ag(4-ts)(L¹)(H₂O)] (5), [Ag₂(epes)₂(L¹)] · 2H₂O (6), [Ag(1,5-nds)_0.5(L²)] · 0.5C₂H₅OH · H₂O (7) [where L¹ = 1,1′-(1,4-butanediyl)bis(2-methylbenzimidazole); L² = 1,1′-(1,4-butanediyl)bis(2-ethylbenzimidazole), pmb = p-methoxybenzoate anion; Ac = acetate anion; 4-aba = 4-aminobenzoate anion; 4-ts = p-toluenesulfonate anion; epes = N-(2-hydroxyethyl)piperazine-N′-(2-ethanesulfonate) anion; 1,5-nds = 1,5-naphthalenedisulfonate anion], have been synthesized and characterized by elemental analysis, IR, and single-crystal X-ray diffraction. The L¹ and L² ligands in compounds 1–7 act as bridging ligands, linking metal ions into chain structures. The chains in compounds 3, 4 and 6 interlace with each other by hydrogen bonds to generate 3D supramolecular structures. In compound 5, π–π interactions between adjacent L¹ ligands hold the chains to a supramolecular layer. In compound 7, the sulfonate anions act as counterions in the framework. The thermal stabilities of 3, 6 and 7, and the luminescent properties for 5–7 in the solid states are also discussed.     

Chemically modified oximato complexes of titanium(IV) isopropoxide as new precursors for the sol-gel preparation of nano-sized titania: Crystal and molecular structure of [Ti{ONC10H16}4·2CH2Cl2]

Reactions of [Ti(OPrⁱ)₄] with various oximes, in anhydrous refluxing benzene yielded complexes of the type [Ti{OPrⁱ}_4−n{L}_n], where, n = 1-4 and LH = (CH₃)₂CNOH (1-4), C₉H₁₆CNOH (5-8) and C₉H₁₈CNOH (9-12). The compounds were characterized by elemental analyses, molecular weight measurements, FAB-mass, FT-IR and NMR (¹H, ¹³C{¹H}) spectral studies. The FAB-mass spectra of mono- (1), and di- (2), (6), (10) substituted products indicate their dimeric nature and that of tri- (3) and tetra- (4), (8) substituted derivatives suggest their monomeric nature. Crystal and molecular structure of [Ti{ONC₁₀H₁₆}₄·2CH₂Cl₂] (8A) suggests that the oximato ligands bind the metal in a dihapto η²-(N, O) manner, leading to the formation of an eight coordinated species. Thermogravimetric curves of (3), (6) and (10) exhibit multi-step decomposition with the formation of TiO₂ as the final product in each case, at 900 °C. Low temperature (∼600 °C) sol-gel transformations of (2), (3), (4), (6), (7) and (8) yielded nano-sized titania (a), (b), (c), (d), (e) and (f), respectively. Formation of anatase phase in all the titania samples was confirmed by powder XRD patterns, FT-IR and Raman spectroscopy. SEM images of (a), (b), (c), (d), (e) and (f) exhibit formation of nano-grains with agglomer like surface morphologies. Compositions of all the titania samples were investigated by EDX analyses. The absorption spectra of the two representative samples, (a) and (f) indicate an energy band gap of 3.17 eV and 3.75 eV, respectively.     

Phosphite ligands derived from distally and proximally substituted dipropyloxy calix[4]arenes and their palladium complexes: Solution dynamics, solid-state structures and catalysis

Two bisphosphite ligands, 25,27-bis-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (3) and 25,26-bis-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy-p-tert-butyl calix[4]arene (4) and two monophosphite ligands, 25-hydroxy-27-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (5) and 25-hydroxy-26-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy- p-tert-butyl calix[4]arene (6) have been synthesized. Treatment of (allyl) palladium precursors [(η³-1,3-R,R′-C₃H₄)Pd(Cl)]₂ with ligand 3 in the presence of NH₄PF₆ gives a series of cationic allyl palladium complexes (3a-3d). Neutral allyl complexes (3e-3g) are obtained by the treatment of the allyl palladium precursors with ligand 3 in the absence of NH₄PF₆. The cationic allyl complexes [(η³-C₃H₅)Pd(4)]PF₆ (4a) and [(η³-Ph₂C₃H₃)Pd(4)]PF₆ (4b) have been synthesized from the proximally (1,2-) substituted bisphosphite ligand 4. Treatment of ligand 4 with [Pd(COD)Cl₂] gives the palladium dichloride complex, [PdCl₂(4)] (4c). The solid-state structures of [{(η³-1-CH₃-C₃H₄)Pd(Cl)}₂(3)] (3f) and [PdCl₂(4)] (4c) have been determined by X-ray crystallography; the calixarene framework in 3f adopts the pinched cone conformation whereas in 4c, the conformation is in between that of cone and pinched cone. Solution dynamics of 3f has been studied in detail with the help of two-dimensional NMR spectroscopy.The solid-state structures of the monophosphite ligands 5 and 6 have also been determined; the calix[4]arene framework in both molecules adopts the cone conformation. Reaction of the monophosphite ligands (5, 6) with (allyl) palladium precursors, in the absence of NH₄PF₆, yield a series of neutral allyl palladium complexes (5a-5c; 6a-6d). Allyl palladium complexes of proximally substituted ligand 6 showed two diastereomers in solution owing to the inherently chiral calix[4]arene framework. Ligands 3, 6 and the allyl palladium complex 3f have been tested for catalytic activity in allylic alkylation reactions.