A facile microwave-assisted palladium-catalyzed cyanation of aryl chlorides

We report an efficient method for the preparation of aryl nitriles from aryl chlorides under either microwave assisted or thermal conditions. A catalyst system comprising tris(dibenzylidene acetone)dipalladium (Pd₂(dba)₃) and 2-(2′,6′-dimethoxybiphenyl)dicyclohexylphosphine (S-Phos) is shown to effectively promote cyanation of various aryl chlorides with Zn(CN)₂ as the cyanide source.     

Synthesis, structure, and catalytic activity of titanium(IV) and zirconium(IV) amides with chiral biphenyldiamine-based ligands

A new series of titanium(IV) and zirconium(IV) amides have been prepared from the reaction between M(NMe₂)₄ (M = Ti, Zr) and C₂-symmetric ligands, (R)-2,2′-bis(pyridin-2-ylmethylamino)-6,6′-dimethyl-1,1′-biphenyl (2H₂), (R)-2,2′-bis(pyrrol-2-ylmethyleneamino)-6,6′-dimethyl-1,1′-biphenyl (3H₂), (R)-2,2′-bis(diphenylphosphinoylamino)-6,6′-dimethyl-1,1′-biphenyl (4H₂), (R)-2,2′-bis(methanesulphonylamino)-6,6′-dimethyl-1,1′-biphenyl (5H₂), (R)-2,2′-bis(p-toluenesulphonylamino)-6,6′-dimethyl-1,1′-biphenyl (6H₂), and C₁-symmetric ligands, (R)-2-(diphenylthiophosphoramino)-2′-(dimethylamino)-6,6′-dimethyl-1,1′-biphenyl (7H) and (R)-2-(pyridin-2-ylamino)-2′-(dimethylamino)-6,6′-dimethyl-1,1′-biphenyl (8H), which are derived from (R)-2,2′-diamino-6,6′-dimethyl-1,1′-biphenyl. Treatment of M(NMe₂)₄ with 1 equiv. of N₄-ligand, 2H₂ or 3H₂ gives, after recrystallization from an n-hexane solution, the chiral zirconium amides (2)Zr(NMe₂)₂ (9), (3)Zr(NMe₂)₂ (11), and titanium amide (3)Ti(NMe₂)₂ (10), respectively, in good yields. Reaction of Zr(NMe₂)₄ with 1 equiv of diphenylphosphoramide 4H₂ affords the chiral zirconium amide (4)Zr(NMe₂)₂ (12) in 85% yield. Under similar reaction conditions, treatment of Ti(NMe₂)₄ with 1 equiv. of sulphonylamide ligand, 5H₂ or 6H₂ gives, after recrystallization from a toluene solution, the chiral titanium amides (5)Ti(NMe₂)₂·0.5C₇H₈ (13·0.5C₇H₈) and (6)Ti(NMe₂)₂ (15), respectively, in good yields, while reaction of Zr(NMe₂)₄ with 1 equiv. of 5H₂ or 6H₂ gives the bis-ligated complexes, (5)₂Zr (14) and (6)₂Zr (16). Treatment of M(NMe₂)₄ with 2 equiv. of diphenylthiophosphoramide ligand 7H or N₃-ligand 8H gives, after recrystallization from a benzene solution, the bis-ligated chiral zirconium amides (7)₂Zr(NMe₂)₂ (17) and (8)₂Zr(NMe₂)₂ (19), and bis-ligated chiral titanium amide (8)₂Ti(NMe₂)₂ (18), respectively, in good yields. All new compounds have been characterized by various spectroscopic techniques, and elemental analyses. The solid-state structures of complexes 10, 12, 13, and 17-19 have further been confirmed by X-ray diffraction analyses. The zirconium amides are active catalysts for the asymmetric hydroamination/cyclization of aminoalkenes, affording cyclic amines in good to excellent yields with moderate ee values, while the titanium amides are not.     

Preparation of ribavirin analogues by copper- and ruthenium-catalyzed azide-alkyne 1,3-dipolar cycloaddition

In this study, we described the synthesis of 1,4- and 1,5-disubstituted-1,2,3-triazolo-nucleosides from various alkynes with 1′-azido-2′,3′,5′-tri-O-acetylribose using either copper-catalyzed azide-alkyne cycloaddition (CuAAC) or ruthenium-catalyzed azide-alkyne cycloaddition (RuAAC), respectively. Optimized RuAAC conditions were realized with the commercially available [Cp^∗RuCl(PPh₃)₂] under microwave heating, which allows a significant acceleration of the reaction times (from 6 h to 5 min). This reaction can work under water-containing system. RuAAC and CuAAC are useful tools for the synthesis of 1,2,3-triazolyl-nucleosides small libraries.     

Reaction of α,α,ω-trichloro- and α,α,α,ω-tetrachloroalkanes with alkali metal acylates in aprotic solvents

Polychloroalkanes and -alkenes R(CH₂)_nCl (R=CHCl₂CH₂, CCl₂=CH, n=1, 3) in dipolar aprotic solvents — dimethylformamide (DMF), dimethylsulfoxide (DMSO), hexamethylphosphoramide (HMPA) — at 130–150°C react selectively at the CH₂Cl group with salts of carboxylic acids RCO₂K(Na) to form dichloroesters RCO₂· (CH₂)_nR (R=CHCl₂CH₂, CCl₂=CH). In tetrachloroalkanes CCl₃CH₂(CH₂)_nCl (n = 1, 3, 5) under the same conditions the selectivity of the CCl₃ and CH₂Cl groups relative to the nucleophile RCO₂K(Na) is altered — unsaturated esters RCO₂(CH₂)_nCH=CCl₂ are formed in one stage with yields of 75–90%. Under the selected conditions, high conversion of polychloroalkanes to esters is attained 3 to 5 times more rapidly than in acid media. The structure of the ester obtained has been confirmed by their PMR spectra.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 12, pp. 2790–2793, December, 1990.     

1,1-(1-Propene-1,3-diyl)-ferrocene: modified synthesis, crystal structure, and polymerisation behaviour

The dehydro[3](1,1^′)ferrocenophanes, 1,1^′-(1-propene-1,3-diyl)-ferrocene (3a), and 1,1^′-(3-phenyl-1-propene-1,3-diyl)-ferrocene (3b) were synthesised under Shapiro conditions from the tosylhydrazones of the corresponding α-oxo-[3](1,1^′)ferrocenophanes. Electrochemistry shows 3a is oxidised at smilar potential to ferrocene; according 3a can be chemically oxidised using silver trifluoromethanesulfonate. The structure of 3a shows a ring tilt of 11.3°. Attempts to polymerise 3a using the ROMP initiator Mo(CHCMe₂Ph)[N(2,6-ⁱPr₂C₆H₃)][OCMe(CF₃)₂]₂ led to a mixture of insoluble material and a soluble mixture of apparently cyclic oligomers ([3a]_n).     

Two new supramolecular assemblies based on Keggin-type polyoxometalates through AgO and ππ stacking interactions

Two new supramolecular assemblies based on Keggin-type polyoxometalates, [Ag₃(4,4′-bipy)₂(2,2′-bipy)₂][Ag(2,2′-bipy)₂][{Ag(2,2′-bipy)}HSiW₁₁VO₄₀] (1) and [Ag₃(4,4′-bipy)₂(2,2′-bipy)₂][Ag(2,2′-bipy)₂][{Ag(2,2′-bipy)}PW₁₁VO₄₀] (2) (4,4′-bipy = 4,4′-bipyridine, 2,2′-bipy = 2,2′-bipyridine), have been synthesized under the hydrothermal conditions and structurally characterized by IR, XPS, TG and single-crystal X-ray diffraction. Compound 1 has a 2D layer network structure via weak Ag^...O interactions. Compound 2 is isostructural with compound 1. In addition, the fluorescence of compound 1 is reported.     

Synthesis, structure, and catalytic activity of binuclear lanthanide complexes with chiral NOBIN-based NNO ligands

Two new amido binuclear complexes {(1)YN(SiMe₃)₂}₂ · C₇H₈ (3 · C₇H₈) and {(2)SmN(SiMe₃)₂}₂ · C₆H₁₄ (4 · C₆H₁₄) have been readily prepared in good yields by amine elimination reaction between Ln[N(SiMe₃)₂]₃ (Ln = Sm, Y) and chiral NNO ligands, (S)-2-(pyridin-2-ylmethylamino)-2′-hydroxy-1,1′-binaphthyl (1H₂) and (S)-5,5′,6,6′,7,7′,8,8′-octahydro-2-(pyrrol-2-ylmethyleneamino)-2′-hydroxy-1,1′-binaphthyl (2H₂), respectively. They both have been characterized by various spectroscopic techniques, elemental analyses, and X-ray diffraction analyses. They are active catalysts for asymmetric hydroamination/cyclization of aminoalkenes and ring-opening polymerization of rac-lactide, affording cyclic amines in excellent conversions with moderate ee values and isotactic-rich polylactides, respectively.     

Hydrothermal syntheses, structures and characterizations of three one-dimensional polyoxomolybdates with 4,4′-dimethylenebiphenyl diphosphonic acid as bridge

Three heterometallic 1-D polymers, [{Ni(1,10-phen)₂(H₂O)}₂ {(Mo₅O₁₅)(4,4′-dbp)}·(5.75H₂O)] (4,4′-dbp=O₃PCH₂C₆H₄C₆H₄CH₂PO₃) (1), [{Co(1,10-phen)₂(H₂O)}₂ {(Mo₅O₁₅)(4,4′-dbp)}·(5.5H₂O)] (2) and [{Ni(2,2′-bpy)₃}{Ni(2,2′-bpy)₂(H₂O)} {(Mo₅O₁₅)(4,4′-dbp)}·(4.75H₂O)] (3), have been synthesized under hydrothermal conditions. Their structures were determined by single crystal X-ray diffraction. The 1-D chains is constructed of [Mo₅O₁₅(4,4′-dbp)]⁴⁻ units, which are further decorated and charge compensated by [M(1,10-phen)₂] (M=Ni, Co) or [Ni(2,2′-bpy)₂] subunits. The thermogravimetric analyses and magnetic properties of 1 and 2 were studied.     

Photochemical hydrogen production catalyzed by polypyridyl ruthenium-cobaloxime heterobinuclear complexes with different bridges

Two heterobinuclear complexes [(bpy)₂Ru(bpy-4-CH₃,4′-CONH(4-py)Co(dmgBF₂)₂(OH₂)](PF₆)₂ (1, dmgBF₂ = (difluoroboryl)dimethylglyoximato) and [(bpy)₂Ru(bpy-4-CH₃,4′-CONHCH₂(4-py)Co(dmgBF₂)₂(OH₂)](PF₆)₂ (2) were prepared, in which the polypyridyl ruthenium photosensitizer and the cobaloxime catalyst are connected either by a conjugated bridge (1) or by an unconjugated one (2). Complexes 1 and 2 were used as photocatalysts for hydrogen generation. Under optimal conditions, the turnover numbers (ton) for hydrogen evolution were 38 for 1 and 48 for 2 in the presence of 300 equiv of both Et₃N and [Et₃NH][BF₄] in the acetone solution during an 8-h irradiation of visible light (λ > ca. 400 nm). The complex 2 with an unconjugated bridge proved to be more efficient for photochemical hydrogen generation than the complex 1 with a conjugated bridge under the same reaction condition.     

Luminescent lanthanide complexes with 4-acetamidobenzoate: Synthesis, supramolecular assembly via hydrogen bonds, crystal structures and photoluminescence

Four new luminescent complexes, namely, [Eu(aba)₂(NO₃)(C₂H₅OH)₂] (1), [Eu(aba)₃(H₂O)₂]·0.5 (4, 4′-bpy)·2H₂O (2), [Eu₂(aba)₄(2, 2′-bpy)₂(NO₃)₂]·4H₂O (3) and [Tb₂(aba)₄(phen)₂(NO₃)₂]·2C₂H₅OH (4) were obtained by treating Ln(NO₃)₃·6H₂O and 4-acetamidobenzoic acid (Haba) with different coligands (4, 4′-bpy=4, 4′-bipyridine, 2, 2′-bpy=2, 2′-bipyridine, and phen=1, 10-phenanthroline). They exhibit 1D chains (1-2) and dimeric structures (3-4), respectively. This structural variation is mainly attributed to the change of coligands and various coordination modes of aba molecules. Moreover, the coordination units are further connected via hydrogen bonds to form 2D even 3D supramolecular networks. These complexes show characteristic emissions in the visible region at room temperature. In addition, thermal behaviors of four complexes have been investigated under air atmosphere. The relationship between the structures and physical properties has been discussed.     

Use of C,N-chelated di-n-butyltin(IV) fluoride for the synthesis of acyl fluorides, fluoroformates and fluorophosgene

{2-[(CH₃)₂NCH₂]C₆H₄}(n-Bu)₂SnF (1) reacts with various chloroformates, acyl chlorides, methanesulfonyl chloride, 4,4′-dimethoxytrityl chloride and phosgene precursors or derivatives to form fluorinated analogues. All reactions proceed rapidly and under mild conditions. The use of a catalytic amount of 1 and KF in toluene led to a relatively high yield of a selected fluoroformate.     

Complexes derived from the general copper(II)/maleamic acid/N,N′,N′′-chelate reaction systems: Synthetic,reactivity, structural and spectroscopic studies

The synthetic investigation of the Cu^II/maleamate(−1) ion (HL⁻)/N,N′,N′′-chelate general reaction system has allowed access to compounds [Cu₂(HL)₂(bppy)₂](ClO₄)₂·H₂O (1·H₂O), [Cu(HL)(bppy)(ClO₄)] (2) and [Cu(HL)(terpy)(H₂O)](ClO₄) (4) (bppy = 2,6-bis(pyrazol-1-yl)pyridine, terpy = 2,2′;6′,2′′-terpyridine). In the absence of externally added hydroxides, compound [Cu₂(L′)₂(bppy)₂](ClO₄)₂ (3) was obtained from MeOH solutions; L′⁻ is the monomethyl maleate(−1) ligand which is formed in situ via the Cu^II-assisted HL⁻ → L′⁻ transformation. In the case of tptz-containing (tptz = 2,4,6-tris(2-pyridyl)-1,3,5-triazine) reaction systems, the Cu^II-assisted hydrolysis of tptz to pyridine-2-carboxamide (L1) afforded complex [Cu(L1)₂(NO₃)₂] (5). The crystal structures of 1–5 are stabilized by intermolecular hydrogen bonding and π–π stacking interactions. Characteristic IR bands of the complexes are discussed in terms of the known structures and the coordination modes of the ligands.     

Collision-induced and infrared multiphoton dissociation studies on M(acetone)2 + (M=Al,Fe, Co,Cu, ScO) in the gas phase

In this paper we report an extension of our earlier study on the structure of Alfacetone)₂ ⁺ Collision-induced dissociation (CID) on MfacetoneXacetone-d₆)⁺ for M = Al, Fe, Co, and Cu yields primarily, if not exclusively, nearly equal amounts of acetone and acetone-d₆. Likewise, infrared multiphoton dissociation (IRMPD) at 10.6 μm yields, exclusively, nearly equal losses of the labeled and unlabeled acetones. These results suggest that the two acetone ligands bind in an equivalent fashion. Sc⁺ was also studied, which proved to be the most interesting. Sc⁺ reacts with acetone to form primarily ScO⁺, which undergoes higher order reactions leading to several products including ScO(acetone)₂ ⁺. IRMPD on this ion produces ScO(acetone-d₆)(CD₂CO)⁺, while its perdeuterated analog also produces ScO(acetone-d₆)⁺ in addition to ScO(acetone-d₆(CD₂CO)⁺. The IRMPD results are supplemented by studying the primary and higher order reactions of Sc⁺ with acetone, as well as the CID of ScO(acetone)₂ ⁺. Finally, a qualitative assessment of the infrared photodissociation cross sections is given. It is found that the relative photodissociation cross sections follow the orders Co(acetone-d₆)₂ ⁺ > Co(acetone)(acetone-d₆) > Co(acetone)₂ ⁺ and Co(acetone-d₆)⁺ > Co(acetone)⁺.     

Synthetic, spectral and catalytic activity studies of ruthenium bipyridine and terpyridine complexes: Implications in the mechanism of the ruthenium(pyridine-2,6-bisoxazoline)(pyridine-2,6-dicarboxylate)-catalyzed asymmetric epoxidation of olefins utilizing H2O2

Various Ru(L₁)(L₂) (1) complexes (L₁ = 2,2′-bipyridines, 2,2′:6′,2″-terpyridines, 6-(4S)-4-phenyl-4,5-dihydro-oxazol-2-yl-2,2′-bipyridinyl or 2,2′-bipyridinyl-6-carboxylate; L₂ = pyridine-2,6-dicarboxylate, pyridine-2-carboxylate or 2,2′-bipyridinyl-6-carboxylate) have been synthesized (or in situ generated) and tested on epoxidation of olefins utilizing 30% aqueous H₂O₂. The complexes containing pyridine-2,6-dicarboxylate show extraordinarily high catalytic activity. Based on the stereoselective performance of chiral ruthenium complexes containing non-racemic 2,2′-bipyridines including 6-[(4S)-4-phenyl-4,5-dihydro-oxazol-2-yl]-[2,2′]bipyridinyl new insights on the reaction intermediates and reaction pathway of the ruthenium-catalyzed enantioselective epoxidation are proposed. In addition, a simplified protocol for epoxidation of olefins using urea hydrogen peroxide complex as oxidizing agent has been developed.     

A novel and efficient solvent-free and heterogeneous method for the synthesis of primary, secondary and bis-N-acylsulfonamides using metal hydrogen sulfate catalysts

Some metal hydrogen sulfates were used as acid catalysts in the N-acylation of different sulfonamides using carboxylic acid chlorides and anhydrides as acylating agents under both heterogeneous and solvent-free conditions. Al(HSO₄)₃ and Zr(HSO₄)₄ were found to have the highest activity and catalyze the reactions efficiently to furnish the primary N-acyl sulfonamides (RCONHSO₂R′), secondary N-acylsulfonamides (RCONR″SO₂R′) and bis-N-acylsulfonamnides [RCO(SO₂R′)N-R″-N(SO₂R′)COR] in good to high yield. The mild reaction conditions, inexpensive and low toxicity of catalysts and easy work-up procedure make this method attractive.     

Specifics of Interaction of Acetone Molecules with Quasi-free Electrons: Analysis of Positron Annihilation Characteristics in Aqueous and Alcoholic Acetone Solutions

The yields of formation of radiolytic hydrogen (H₂) and orthopositronium (o-Ps) in aqueous and alcoholic acetone solutions were experimentally determined. A decrease in the o-Ps yield with an increase in the acetone concentration is much weaker than the decline in the yield of solvated electrons (e^– _s) under picosecond pulse radiolysis conditions. In contrast, the decrease in the o-Ps yield is minimal in higher alcohols where the inhibiting action of acetone e^– _s is most pronounced. These findings seem to contradict the conventional concepts of Ps formation via the intratrack reaction of positron recombination with a track electron (e^–), which competes with the reaction of e^– scavenging by dissolved acetone molecules. This contradiction can be eliminated, assuming that the scavenging of e^– by acetone begins from the formation of the weakly bound transient state (CH₃)₂CO···e^– capable of donating e^– to a positron. This opens up an additional pathway for the formation of the Ps atom.     

Formation of isoxazole derivatives via nitrile oxide using ammonium cerium nitrate (CAN): a novel one-pot synthesis of 3-acetyl- and 3-benzoylisoxazole derivatives

The reactions of alkenes and alkynes with ammonium cerium(IV) nitrate ((NH₄)₂Ce(NO₃)₆, CAN(IV)) in acetone under reflux gave the corresponding 3-acetyl-4,5-dihydroisoxazole and 3-acetylisoxazole derivatives. In the case of acetophenone, 3-benzoyl-4,5-dihydroisoxazole and 3-benzoylisoxazole derivatives were obtained. Reaction of acetone with CAN(IV) afforded the corresponding furoxan (3,4-diacetyl-1,2,5-oxadiazole 2-oxide) as the dimer of nitrile oxide. Moreover, it was found that yields of isoxazole derivatives were improved using ammonium cerium(III) nitrate tetrahydrate ((NH₄)₂Ce(NO₃)₅·4H₂O, CAN(III))-formic acid. The reaction mechanisms based on nitration and formation of nitrile oxide mediated by CAN(IV) or CAN(III) from acetone or acetophenone are also proposed.     

Synthesis and X-ray structures of new chiral Ag(I) complexes with biaryl-based N4-donor ligands

Condensation of (R)-2,2′-diamino-1,1′-binaphthyl or (R)-6,6′-dimethylbiphenyl-2,2′-diamine with 2 equiv of 2-pyridine carboxaldehyde in toluene in the presence of molecular sieves at 70 °C gives (R)-N,N′-bis(pyridin-2-ylmethylene)-1,1′-binaphthyl-2,2′-diimine (1), and (R)-N,N′-bis(pyridin-2-ylmethylene)-6,6′-dimethylbiphenyl-2,2′-diimine (3), respectively, in good yields. Reduction of 1 with an excess of NaBH₄ in a solvent mixture of MeOH and toluene (1:1) at 50 °C gives (R)-N,N′-bis(pyridin-2-ylmethyl)-1,1′-binaphthyl-2,2′-diamine (2) in 95% yield. Rigidity plays an important role in the formation of helicate silver(I) complexes. Treatment of 1, or 3 with 1 equiv of AgNO₃ in mixed solvents of MeOH and CH₂Cl₂ (1:4) gives the chiral, dinuclear double helicate Ag(I) complexes [Ag₂(1)₂][NO₃]₂ (4) and [Ag₂(3)₂][NO₃]₂ · 2H₂O (6), respectively, in good yields. While under the similar reaction conditions, reaction of 2 with 1 equiv of AgNO₃ affords the chiral, mononuclear single helicate Ag(I) complex [Ag(2)][NO₃] (5) in 90% yield. [Ag₂(1)₂][NO₃]₂ (4) can further react with excess AgNO₃ to give [Ag₂(1)₂]₃[NO₃]₂[Ag(CH₃OH)(NO₃)₃]₂ · 2CH₃OH (7) in 75% yield. All compounds have been fully characterized by various spectroscopic techniques and elemental analyses. Compounds 1 and 5-7 have been further subjected to single-crystal X-ray diffraction analyses.     

Synthesis,characterization, electrochemical and photophysical properties of bimetallic complexes of rhenium(I) and osmium(II)

Monometallic and bimetallic diimine complexes of rhenium(I) and osmium(II), [(CO)₃(bpy)Re(4,4′-bpy)](PF₆) I, [(CO)₃(bpy)Re(4,4′-bpy)Re(bpy)(CO)₃](PF₆)₂II, [Cl(bpy)₂Os(4,4′-bpy)](PF₆) III and [Cl(bpy)₂Os(4,4′-bpy)Os(bpy)₂Cl](PF₆)₂IV, and a new heterobimetallic complex of rhenium(I) and osmium(II) [(CO)₃(bpy)Re(4,4′-bpy)Os(bpy)Cl](PF₆)₂V (bpy = 2,2′-bipyridine; 4,4′-bpy = 4,4′-bipyridine) have been synthesized and characterized by various spectral techniques. The photophysical properties of all the complexes have been studied and a comparison is made between the heterobimetallic and corresponding monometallic and homobimetallic complexes. Emission and transient absorption spectral studies reveal that excited state energy transfer from the rhenium(I) chromophore (∗Re) to osmium(II) takes place. The energy transfer rate constant is found to be 8.7 × 10⁷ s⁻¹.     

Synthesis, structures and electrochemical properties of ruthenium (II) complexes bearing bidentate 1,8-naphthyridine and terpyridine analogous (N,N,C)-tridentate ligands

1,8-Naphthyridine (napy) and terpyridine-analogous (N,N,C) tridentate ligands coordinated ruthenium (II) complexes, [RuL(napy-κ²N,N′) (dmso)](PF₆)₂ (1: L=L¹=N″-methyl-4′-methylthio-2,2′:6′,4″-terpyridinium, 2: L = L² = N″-methyl-4′-methylthio-2,2′:6′,3″-terpyridinium) were prepared and their chemical and electrochemical properties were characterized. The structure of complex 1 was determined by X-ray crystallographic study, showing that it has a distorted octahedral coordination style. The cyclic voltammogram of 1 in DMF exhibited two reversible ligand-localized redox couples. On the other hand, the CV of 2 shows two irreversible cathodic peaks, due to the Ru-C bond of 2 containing the carbenic character. The IR spectra of 1 in CO₂-saturated CH₃CN showed the formation of Ru-(η¹-CO₂) and Ru-CO complexes under the controlled potential electrolysis of the solution at −1.44 V (vs. Fc/Fc⁺). The electrochemical reduction of CO₂ catalyzed by 1 at −1.54 V (vs. Fc/Fc⁺) in DMF-0.1 M Me₄NBF₄ produced CO with a small amount of HCO₂H.