Conservation of [(C2H4NH3)3N]2·(ZrF7)2·H2O layers during the topotactic dehydration of [(C2H4NH3)3N]2·(ZrF7)2·9H2O

Tren amine cations [(C₂H₄NH₃)₃N]³⁺ and zirconate or tantalate anions adopt a ternary symmetry in two hydrates, [H₃tren]₂·(ZrF₇)₂·9H₂O and [H₃tren]₆·(ZrF₇)₂·(TaOF₆)₄·3H₂O, which crystallise in R32 space group with a_H = 8.871 (2) Å, c_H = 38.16 (1) Å and a_H = 8.758 (2) Å, c_H = 30.112 (9) Å, respectively. Similar [H₃tren]₂·(MX₇)₂·H₂O (M = Zr, Ta; X = F, O) sheets are found in both structures; they are separated by a water layer (O_w(2)-O_w(3)) in [H₃tren]₂·(ZrF₇)₂·9H₂O. Dehydration of [H₃tren]₂·(ZrF₇)₂·9H₂O starts at room temperature and ends at 90 °C to give [H₃tren]₂·(ZrF₇)₂·H₂O. [H₃tren]₂·(ZrF₇)₂·H₂O layers remain probably unchanged during this dehydration and the existence of one intermediate [H₃tren]₂·(ZrF₇)₂·3H₂O hydrate is assumed. O_w(1) molecules are tightly hydrogen bonded with -NH₃⁺ groups and decomposition of [H₃tren]₂·(ZrF₇)₂·H₂O occurs from 210 °C to 500 °C to give successively [H₃tren]₂·(ZrF₆)·(Zr₂F₁₂) (285 °C), an intermediate unknown phase (320 °C) and ZrF₄.     

Syntheses and structures of three new scandium selenites: Sc2(SeO3)3·H2O, Sc2 (SeO3)3·3H2O and CsSc3(SeO3)4 (HSeO3)2·2H2O

Three new hydrated scandium selenites have been hydrothermally synthesized as single crystals and structurally and physically characterized. Sc₂(SeO₃)₃·H₂O crystallizes as a new structure type containing novel ScO₇ pentagonal bipyramidal and ScO₆₊₁ capped octahedral coordination polyhedra. Sc₂(SeO₃)₃·3H₂O contains typical ScO₆ octahedra and is isostructural with its M₂(SeO₃)₃·3H₂O (M=Al, Cr, Fe, Ga) congeners. CsSc₃(SeO₃)₄(HSeO₃)₂·2H₂O contains near-regular ScO₆ octahedra and has essentially the same structure as its indium-containing analogue. All three phases contain the expected pyramidal [SeO₃]^2- selenite groups. Crystal data: Sc₂(SeO₃)₃·3H₂O, M_r=524.85, trigonal, R3c (No. 161), , , , Z=6, R(F)=0.018, wR(F²)=0.036; Sc₂(SeO₃)₃·H₂O, M_r=488.82, orthorhombic, P2₁2₁2₁ (No. 19), , , , , Z=4, R(F)=0.051, wR(F²)=0.086; CsSc₃(SeO₃)₄(HSeO₃)₂·2H₂O, M_r=1067.60, orthorhombic, Pnma (No. 62), , , , , Z=4, R(F)=0.035, wR(F²)=0.070.     

Microwave dielectric properties of BaO−2CeO2−nTiO2 ceramics

The BaO-2CeO₂-nTiO₂ ceramics with n=3, 4 and 5 have been prepared with CeO₂ as starting material. The ceramics have been characterized using scanning electron microscopy, X-ray diffraction, Raman and X-ray photoelectron spectroscopy techniques. The microwave dielectric properties have been measured using standard dielectric resonator techniques. BaO-2CeO₂-3TiO₂ (123), BaO-2CeO₂-4TiO₂ (124) and BaO-2CeO₂-5TiO₂ (125) ceramics showed dielectric constants of 38, 27 and 32, respectively. All the ceramics showed fairly good unloaded Q-factors. 124 and 125 compounds exhibited low τ_f values, while 123 showed a high τ_f value.     

Nonisothermal Kinetics of Dehydration Process of [Sm（m-CIBA）3phen]2·2H2O and [Sm（p-CIBA）3phen]2·2H2O

Compounds [Sm（m-CIBA）3phen]2.2H20 and [Sm（p-CIBA）3phen]2·2H20（m-CIBA=m-chlorobenzoate, pClBA=p-chlorobenzoate, phen=l,10-phenanthroline） were prepared. The dehydration processes and kinetics of these compounds were studied from the analysis of the DSC curves using a method of processing the data of thermal analysis kinetics. The Arrhenius equation for the dehydration process can be expressed as lnk=-38.65-243.90×l0^3/RT for [Sm（m-CIBA）3phen]2·2H2O, and lnk=38.70-172.22×103/RT for [Sm（p-CIBA）3phen]2·2H2O. The values of △H^1, △G^1, and △S^1 of dehydration reaction for the title comnonnds are determined respectively.     

Two layered gallophosphates assembled about the chiral metal complexes: Co(en)3·Ga3P4O16·5H2O and trans−Co(dien)2·Ga3P4O16·3H2O

Two new layered gallophosphates Co(en)₃·Ga₃P₄O₁₆·5H₂O (1) and trans-Co(dien)₂·Ga₃P₄O₁₆·3H₂O (2) have been hydrothermally synthesized using the racemic mixture of chiral metal complex Co(en)₃Cl₃ and Co(dien)₂Cl₃ as the structure-directing agent, respectively. Their structures are determined by single-crystal X-ray diffraction analysis and further characterized by X-ray power diffraction, ICP, elemental, and TG analyses. The structures of 1 and 2 consist of vertex-linking GaO₄ and PO₃(=O) tetrahedral units forming macroanionic [Ga₃P₄O₁₆]³⁻ sheets with a 4.6-net. The 4.6-net is characteristic of chiral [3.3.3] propellane-like structural motifs. The sheets of 1 stack in an ABAB sequence, with a pair of enantiomers of chiral Co(en)₃³⁺ cations residing in the interlayer region. The sheets of 2 array in a helical fashion with an ABCDEF stacking sequence, with only one enantiomer of chiral Co(dien)₂³⁺ cations residing in the interlayer region. Structural elucidation of 1 and 2 reveals that there exist stereo-specific correspondence between the metal complex template and the structure of the inorganic host. Crystal data: 1, Co(en)₃·Ga₃P₄O₁₆·5H₂O, orthorhombic, Pnna (No. 52), a=8.6618(2) Å, b=21.6071(5) Å, c=13.7426(4) Å, Z=4, R₁=0.0337 (I>2σ(I)), wR₂=0.0985 (all data); 2, Co(dien)₂·Ga₃P₄O₁₆·3H₂O, hexagonal, P6₅22 (No. 179), a=8.5152(7) Å, b=8.5152(7) Å, c=63.278(8) Å, R₁=0.1183 (I>2σ(I)), wR₂=0.2864 (all data) and Z=6.     

Synthesis, structure, and characterization of hybrid materials: [Ce(H2O)]2[O2C(CH2)2CO2]3 and [Sm(H2O)]2[O2C(CH2)2CO2]3·H2O

The rare-earth dicarboxylate hybrid materials [Ce(H₂O)]₂[O₂C(CH₂)₂CO₂]₃ ([Ce(Suc)]) and [Sm(H₂O)]₂[O₂C(CH₂)₂CO₂]₃·H₂O ([Sm(Suc)]) have been hydrothermally synthesized (200°C, 3 days) under autogenus pressure. [Ce(Suc)] is triclinic, a=7.961 (3) Å, b=8.176 (5) Å, c=14.32 (2) Å, α=97.07° (7), β=96.75° (8), γ=103.73° (6), and z=2. The crystal structure of this compound has been determined using 3120 unique single crystal data. The final refinements let the agreement factors R₁ and wR₂(F²) converge to 0.0138 and 0.0363, respectively. [Ce(Suc)] is built up from infinite chains of edge-sharing nine-fold coordinated cerium atoms running along [100]. These chains are interconnected by the carbon atoms of the succinate anions, leading to a three-dimensional hybrid framework. The cell constants of [Sm(Suc)], isotypic with monoclinic C2/c [Pr(H₂O)]₂[O₂C(CH₂)₂CO₂]₃·H₂O ([Pr(Suc)]), were refined starting from X-ray powder data: a=20.275 (3) Å, b=7.919 (6) Å, c=14.130 (3) Å, and β=121.45° (1). Despite its lower symmetry, [Ce(Suc)] presents an important structural filiation with [Sm(Suc)]     

Structural and electrical properties of the 2Bi2O3·3ZrO2 system

Powder mixtures of α-Bi₂O₃ (bismite) and monoclinic m-ZrO₂ (baddeleyite) in the molar ratio 2:3 were mechanochemically and thermally treated with the goal to examine the phases, which may appear during such procedures. The prepared samples were characterized by X-ray powder diffraction, differential scanning calorimetry (DSC), electrical measurements, as well as scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The mechanochemical reaction leads to the gradual formation of a nanocrystalline phase, which resembles δ-Bi₂O₃, a high-temperature Bi₂O₃ polymorph. Isothermal sintering in air at a temperature of 820 °C for 24 h followed by quenching to room temperature yielded a mixture of ZrO₂-stabilized β-Bi₂O₃ and m-ZrO₂ phases, whereas in slowly cooled products, the complete separation of the initial α-Bi₂O₃ and m-ZrO₂ constituents was observed. The dielectric permittivity of the sintered samples significantly depended on the temperature. The sintered and quenched samples exhibited a hysteresis dependence of the dielectric shift, showing that the ZrO₂-doped β-Bi₂O₃ phase possess ferroelectric properties, which were detected for the first time. This fact, together with Rietveld refinement of the β-Bi₂O₃/m-ZrO₂ mixture based on neutron powder diffraction data showed that ZrO₂-doped β-Bi₂O₃ has a non-centrosymmetric structure with as the true space group. The ZrO₂ content in the doped β-Bi₂O₃ and the crystal chemical reasons for the stabilization of the β-Bi₂O₃ phase by the addition of m-ZrO₂ are discussed.     

Synthesis of Li(x)Na(2−x)Mn2S3 and LiNaMnS2 through redox-induced ion exchange reactions

Na₂Mn₂S₃ was oxidatively deintercalated using iodine in acetonitrile to yield Na_1.3Mn₂S₃, with lattice constants nearly identical to that of the reactant. Lithium was then reductively intercalated into the oxidized product to yield Li_0.7Na_1.3Mn₂S₃. When heated, this metastable compound decomposed to form a new crystalline compound, LiNaMnS₂, along with MnS and residual Na₂Mn₂S₃. Single crystal X-ray diffraction structural analysis of LiNaMnS₂ revealed that this compound crystallizes in P-3m1 with cell parameters a=4.0479(6) Å, c=6.7759(14) Å, V=96.15(3) Å³ (Z=1, wR2=0.0367) in the NaLiCdS₂ structure-type.     

Long-range ordering in the Bi1−xAexFeO3−x/2 perovskites: Bi1/3Sr2/3FeO2.67 and Bi1/2Ca1/2FeO2.75

Two-ordered perovskites, Bi_1/3Sr_2/3FeO_2.67 and Bi_1/2Ca_1/2FeO_2.75, have been stabilized and characterized by transmission electron microscopy, Mössbauer spectroscopy and X-ray powder diffraction techniques. They both exhibit orthorhombic superstructures, one with a≈b≈2a_p and c≈3a_p (S.G.: Pb2n or Pbmn) for the Sr-based compound and one with a≈b≈2a_p and c≈8a_p (S.G.: B222, Bmm2, B2mm or Bmmm) for the Ca-based one. The high-resolution transmission electron microscopy (HRTEM) images evidence the existence of one deficient [FeO_x]_∞ layer, suggesting that Bi_1/3Sr_2/3FeO_2.67 and Bi_1/2Ca_1/2FeO_2.75 behave differently compared to their Ln-based homolog. The HAADF-STEM images allow to propose a model of cation ordering on the A sites of the perovskite. The Mössbauer analyses confirm the trivalent state of iron and its complex environment with three types of coordination. Both compounds exhibit a high value of resistivity and the inverse molar susceptibility versus temperature curves evidence a magnetic transition at about 730 K for the Bi_1/3Sr_2/3FeO_2.67 and a smooth reversible transition between 590 and 650 K for Bi_1/2Ca_1/2FeO_2.75.     

New effective reagent [Cp2ZrH2 · ClAlEt2]2 for alkene hydrometallation

New bimetallic complex [Cp₂ZrH₂ · ClAlEt₂]₂ (1) was synthesized, and its reactivity in hydrometallation reaction with the following alkenes was studied: hept-1-ene, okt-1-ene, α-methylstyrene, (1S)-β-pinene, (+)-camphene. Complex 1 shows the highest reactivity among the other known Al,Zr-bimetallic complexes: [Cp₂ZrH₂ · ClAlBuⁱ₂]₂ (2), [Cp₂ZrH₂ · AlEt₃]₂ (3), [Cp₂ZrH₂ · AlBuⁱ₃]₂ (4) and [Cp₂ZrH₂ · HAlBuⁱ₂] (5) as well as organoaluminium compounds (OAC): ⁱBu₂AlH, ⁱBu₃Al and ⁱBu₂AlCl in presence of Zr catalysts. Chlorine containing complexes 1 and 2 appear to be more effective in alkene hydrometallation, and relative hydrometallation rates are (1S)-β-pinene ? (+)-camphene < α-methylstyrene < oct-1-ene < hept-1-ene. Hydrometallation of (1S)-β-pinene and its subsequent oxidation with I₂ run with high diastereoselectivity and yield trans-myrtanol. However, the diastereoselectivity of (+)-camphene hydrometallation is less than that for (1S)-β-pinene, and the reaction gives predominately endo-camphanol.     

Crystal structure and magnetic properties of Co2TeO3Cl2 and Co2TeO3Br2

The crystal structures of the two new synthetic compounds Co₂TeO₃Cl₂ and Co₂TeO₃Br₂ are described together with their magnetic properties. Co₂TeO₃Cl₂ crystallize in the monoclinic space group P2₁/m with unit cell parameters a=5.0472(6) Å, b=6.6325(9) Å, c=8.3452(10) Å, β=105.43(1)°, Z=2. Co₂TeO₃Br₂ crystallize in the orthorhombic space group Pccn with unit cell parameters a=10.5180(7) Å, b=15.8629(9) Å, c=7.7732(5) Å, Z=8. The crystal structures were solved from single crystal data, R=0.0328 and 0.0412, respectively. Both compounds are layered with only weak interactions in between the layers. The compound Co₂TeO₃Cl₂ has [CoO₄Cl₂] and [CoO₃Cl₃] octahedra while Co₂TeO₃Br₂ has [CoO₂Br₂] tetrahedra and [CoO₄Br₂] octahedra. The Te(IV) atoms are tetrahedrally [TeO₃E] coordinated in both compounds taking the 5s² lone electron pair E into account. The magnetic properties of the compounds are characterized predominantly by long-range antiferromagnetic ordering below 30 K.     

Structural investigation in the TiB2-(Na2O·B2O3·Al2O3) system

Composites in the TiB₂-Na₂O·B₂O₃·Al₂O₃ systems, TiB₂-MBA (MB stands for sodium metaborate and A is Al₂O₃), were prepared by self-propagating high-temperature synthesis (SHS), in simultaneous mode. Selection of these compositions was ruled by the interesting properties of both TiB₂ and double borates of alkali metal and aluminum. The structure of the obtained materials was evaluated by micro-Raman spectroscopy, from room temperature up to 600 °C, and X-ray photoelectron spectroscopy (XPS). Formation of the TiB₂ and TiO_2−xB_x phases along with TiO₂ as rutile were identified as titanium speciation in the grain phase embedded in a sodium aluminum borate matrix. Integration of the Raman spectra of the grain phases revealed a TiB₂ content of 16.99% and 23.32% for the two composite investigated 2TiB₂·2MBA and 3TiB₂·5MBA. A constrained-width model for the spectral deconvolution of the high-frequency Raman band was forwarded to calculate the proportion of tetrahedral boron atoms (7.424%) in the blank borate matrix Na₂B₂O₄·Al₂O₃ in solid phase.     

A Vanadium (V) Hydroxymonophosphate Hydrate with a “Tape-Like” structure: K3(VO2)2PO4PO3OH·H2O

A new vanadium (V) hydroxymonophosphate hydrate, K₃(VO₂)₂PO₄PO₃OH·H₂O, with a “tape-like” structure has been synthesized. This compound crystallizes in the space group P2₁/c with a=5.099(1) Å, b=29.168(3) Å, c=8.115(1) Å, β=91.65(1)°. Its structure consists of [V₂P₂O₁₁OH]_∞ ribbons built up of corner-sharing VO₅ pyramids, PO₄, and PO₃OH tetrahedra, interleaved with K⁺ ions and H₂O molecules. In spite of its unidimensional character, this structure forms pentagonal tunnels. Relationships with frameworks involving tetragonal tunnels are studied.     

Thermal decomposition mechanisms of MgCl2·6H2O and MgCl2·H2O

The thermal decomposition mechanisms and the intermediate morphology of MgCl₂·6H₂O and MgCl₂·H₂O were studied using integrated thermal analysis, X-ray diffraction, scanning electron microscope and chemical analysis. The results showed that there were six steps in the thermal decomposition of MgCl₂·6H₂O: producing MgCl₂·4H₂O at 69 °C, MgCl₂·2H₂O at 129 °C, MgCl₂·nH₂O (1 ≤ n ≤ 2) and MgOHCl at 167 °C, the conversion of MgCl₂·nH₂O (1 ≤ n ≤ 2) to Mg(OH)Cl·0.3H₂O by simultaneous dehydration and hydrolysis at 203 °C, the dehydration of Mg(OH)Cl·0.3H₂O to MgOHCl at 235 °C, and finally the direct conversion of MgOHCl to the cylindrical particles of MgO at 415 °C. To restrain the sample hydrolysis and to obtain MgCl₂·H₂O, MgCl₂·6H₂O was first calcined in HCl atmosphere until 203 °C when MgCl₂·H₂O was obtained; HCl gas was then turned off and the calcination process continued, producing Mg₃Cl₂(OH)₄·2H₂O calcined at 203 °C, Mg₃(OH)₄Cl₂ at 220 °C and MgO at 360 °C. The temperature of producing MgO from calcination of MgCl₂·H₂O was lower (360 °C) than that from MgCl₂·6H₂O (415 °C) because of its more reactive intermediate products: the irregular shape and tiny needle-like Mg₃Cl₂(OH)₄·2H₂O particles and the uneven surface porous Mg₃(OH)₄Cl₂ particles. The MgO particles obtained at 360 °C had a flake structure.     

Jahn-Teller-distorted dimeric anions in (cat)[Mn2F8(H2O)2]·2H2O (cat = pipzH2, dabcoH2) and (dabcoH2)2[Mn2F8(H2PO4)2]

Using biprotonated dabco (1,4-diazabicyclo[2.2.2]octane) or pipz (piperazine) as counter cations, mixed-ligand fluoromanganates(III) with dimeric anions could be prepared from hydrofluoric acid solutions. The crystal structures were determined by X-ray diffraction on single crystals: dabcoH₂[Mn₂F₈(H₂O)₂]·2H₂O (1), space group P2₁, Z = 2, a = 6.944(1), b = 14.689(3), c = 7.307(1) Å, β = 93.75(3)°, R₁ = 0.0240; pipzH₂[Mn₂F₈(H₂O)₂]·2H₂O (2), space group , Z = 2, a = 6.977(1), b = 8.760(2), c = 12.584(3) Å, α = 83.79(3), β = 74.25(3), γ = 71.20(3)°, R₁ = 0.0451; (dabcoH₂)₂[Mn₂F₈(H₂PO₄)₂] (3), space group P2₁/n, Z = 4, a = 9.3447(4), b = 12.5208(4), c = 9.7591(6) Å, β = 94.392(8)°, R₁ = 0.0280. All three compounds show dimeric anions formed by [MnF₅O] octahedra (O from oxo ligands) sharing a common edge, with strongly asymmetric double fluorine bridges. In contrast to analogous dimeric anions of Al or Fe(III), the oxo ligands (H₂O (1,2) or phosphate (3)) are in equatorial trans-positions within the bridging plane. The strong pseudo-Jahn-Teller effect of octahedral Mn(III) complexes is documented in a huge elongation of an octahedral axis, namely that including the long bridging Mn-F bond and the Mn-O bond. In spite of different charge of the anion in the fluoride phosphate, the octahedral geometry is almost the same as in the aqua-fluoro compounds. The strong distortion is reflected also in the ligand field spectra.     

Syntheses, structures, optical properties, and theoretical calculations of Cs2Bi2ZnS5, Cs2Bi2CdS5, and Cs2Bi2MnS5

Three new compounds, Cs₂Bi₂ZnS₅, Cs₂Bi₂CdS₅, and Cs₂Bi₂MnS₅, have been synthesized from the respective elements and a reactive flux Cs₂S₃ at 973 K. The compounds are isostructural and crystallize in a new structure type in space group Pnma of the orthorhombic system with four formula units in cells of dimensions at 153 K of a=15.763(3), b=4.0965(9), c=18.197(4) Å, V=1175.0(4) Å³ for Cs₂Bi₂ZnS₅; a=15.817(2), b=4.1782(6), c=18.473(3)  Å, V=1220.8(3)  ų for Cs₂Bi₂CdS₅; and a=15.830(2), b=4.1515(5), c=18.372(2) Å, V=1207.4(2) Å³ for Cs₂Bi₂MnS₅. The structure is composed of two-dimensional _∞²[Bi₂MS₅²⁻] (M=Zn, Cd, Mn) layers that stack perpendicular to the [100] axis and are separated by Cs⁺ cations. The layers consist of edge-sharing _∞¹[Bi₂S₆⁶⁻] and _∞¹[MS₃⁴⁻] chains built from BiS₆ octahedral and MS₄ tetrahedral units. Two crystallographically unique Cs atoms are coordinated to S atoms in octahedral and monocapped trigonal prismatic environments. The structure of Cs₂Bi₂MS₅, is related to that of Na₂ZrCu₂S₄ and those of the AMM′Q₃ materials (A=alkali metal, M=rare-earth or Group 4 element, M′= Group 11 or 12 element, Q=chalcogen). First-principles theoretical calculations indicate that Cs₂Bi₂ZnS₅ and Cs₂Bi₂CdS₅ are semiconductors with indirect band gaps of 1.85 and 1.75 eV, respectively. The experimental band gap for Cs₂Bi₂CdS₅ is ≈1.7 eV, as derived from its optical absorption spectrum.     

Polymorphism in the Sc2Si2O7-Y2Si2O7 system

This paper examines the structural changes with temperature and composition in the Sc₂Si₂O₇-Y₂Si₂O₇ system; members of this system are expected to form in the intergranular region of Si₃N₄ and SiC structural ceramics when sintered with the aid of Y₂O₃ and Sc₂O₃ mixtures. A set of different compositions have been synthesized using the sol-gel method to obtain a xerogel, which has been calcined at temperatures between 1300 and 1750 °C during different times. The temperature-composition diagram of the system, obtained from powder XRD data, is dominated by the β-RE₂Si₂O₇ polymorph, with γ-RE₂Si₂O₇ and δ-RE₂Si₂O₇ showing very reduced stability fields. Isotherms at 1300 and 1600 °C have been analysed in detail to evaluate the solid solubility of the components. Although, the XRD data show a complete solid solubility of β-Sc₂Si₂O₇ in β-Y₂Si₂O₇ at 1300 °C, the ²⁹Si MAS-NMR spectra indicate a local structural change at x ca. 1.15 (Sc_2−xY_xSi₂O₇) related to the configuration of the Si tetrahedron, which does not affect the long-range order of the β-RE₂Si₂O₇ structure. Finally, it is interesting to note that, although Sc₂Si₂O₇ shows a unique stable polymorph (β), Sc³⁺ is able to replace Y³⁺ in γ-Y₂Si₂O₇ in the compositional range 1.86?x?2 (where x is Sc_2−xY_xSi₂O₇) as well as in δ-Y₂Si₂O₇ for compositions much closer to the pure Y₂Si₂O₇.     

Inorganic-Organic Hybrid Materials: Synthesis and X-Ray Structure of N,N′-Dimethylimidazolium Salts [(Me2Im)2][Cd2(SCN)6] and N,N′-Dicyclohexylimidazolium [(Cy2Im)2][Cd2(SCN)6]·C3H6O

Two novel N,N′-dialkylimidazolium thiocyanate-cadmium complexes [(R₂Im)₂][Cd₂(SCN)₆] for R=Me (3), and cyclohexyl (4) have been synthesized and characterized by single-crystal X-ray diffraction. Compound 3 crystallizes in the monoclinic unit cell dimensions of 17.468(3), 7.7273(12), 10.6750(16) Å, 104.833(2)°, and space group C2 with two [(Me₂Im)₂] [Cd₂(SCN)₆] per unit cell. The two cadmium atoms in 3 are octahedrally coordinated in 4N2S and 2N4S coordination environment, and linking into one-dimensional zigzag chains. Compound 4 belongs to the monoclinic space group Cc with unit cell of dimensions 13.3049(12), 17.5550(16), 20.8012(19) Å, 101.494(2)°, and four [(Cy₂Im)₂][Cd₂(SCN)₆]·C₃H₆O per unit cell. The cadmium atoms in 4 are all 3N3S hexa-coordinated with six bridging SCN⁻ ions in an fac configuration and form infinite zigzag polymeric chains. The infinite chains in 3 form an approximate hexagonal array, making triangular channels which are occupied by N,N′-dimethylimidazolium ions, whereas the chains in 4 form layered structure, and the layers are stacked perpendicularly with respect to the orientation of the infinite anionic chains alternatively. N,N′-dicyclohexylimidazolium cations and solvent molecules fill in between layers.     

Synthesis of a new class of unsymmetrical PCP′ pincer ligands and their palladium (II) complexes: X-ray structure determination of PdCl{C6H3-2-CH2PPh2-6-CH2PBu2}

The unsymmetrical PCP′ pincer ligands {C₆H₄-1-CH₂PPh₂-3-CH₂PBu^t₂} and {C₆H₄-1-CH₂PPh₂-3-CH₂PPrⁱ₂} and the corresponding palladium complexes: PdCl{C₆H₃-2-CH₂PPh₂-6-CH₂PBu^t₂} and PdCl{C₆H₃-2-CH₂PPh₂-6-CH₂PPrⁱ₂} have been synthesized in good yields. The molecular structure of PdCl{C₆H₃-2-CH₂PPh₂-6-CH₂PBu^t₂} was determined through a single crystal X-ray diffraction study. The palladium center was found to be located into a slightly distorted square planar environment in which the {C₆H₄-1-CH₂PPh₂-3-CH₂PBu^t₂} ligand is coordinated as a tridentate, PCP pincer type chelate. The complex, PdCl{C₆H₃-2-CH₂PPh₂-6-CH₂PPrⁱ₂} catalyzes the Heck coupling of iodobenzene with styrene.     

Optical properties of (Y1−xTmx)3GaO6 and subsolidus phase relation of Y2O3-Ga2O3-Tm2O3

A serial of samples in Y₂O₃-Ga₂O₃-Tm₂O₃ pseudo-ternary system are prepared by solid-state chemical reaction method. The range of solid solution in (Y_1−xTm_x)₃GaO₆ is 0<x<0.384. Powder X-ray diffraction shows that the compounds crystallize in Gd₃GaO₆ (Cmc2₁)-type structure. The solid solubilities of Y_3+xGa_5−xO₁₂ (x=0-0.77) and Tm_3+xGa_5−xO₁₂ (x=0-0.62) are 37.5-47.11 at% Y₂O₃, and 37.5-45.26 at% Tm₂O₃, respectively. PL spectra of Tm-doped Y₃GaO₆ show that there is a sharp blue emission at ∼456 nm from the ¹D₂→³F₄ transition at room temperatures with two lifetimes (∼5 and ∼15 μs) and a narrow saturation range of PL intensity for the Tm³⁺ content from x=0.005 to 0.03. The sharp emission and long lifetime of (Y_1−xTm_x)₃GaO₆ indicate that Y₃GaO₆ is a potential phosphor and laser crystal host material.