Total synthesis of the (+)-antimycin A3 family: structure elucidation of (+)-antimycin A3a

(+)-Antimycin A_3a (AA_3a), one component of the natural antibiotic antimycin A₃, was synthesized using an asymmetric aza-Claisen rearrangement. The stereochemistry at the 2′ position on the acyloxy side chain of AA_3a was established as S-configuration by comparison of the synthetic AA_3a and the natural AA_3a.     

Total synthesis of (+)-conagenin

The total synthesis of the immunomodulator, (+)-conagenin was achieved using, as a key step, a method developed by us for the synthesis of 2-methyl-1,3-diols via Ti(III)-mediated diastereo- and regioselective opening of trisubstituted 2,3-epoxy alcohols, to carry out the stereoselective construction of its pentanoic acid segment.     

Total synthesis of stevastelin B3

The total synthesis of stevastelin B3 was achieved using, as a key step, a method developed by us for the synthesis of 2-methyl-1,3-diols by Ti(III)-mediated diastereo- and regioselective opening of trisubstituted 2,3-epoxy alcohols, to carry out the stereoselective construction of its propionate-derived fatty acid segment.     

Total synthesis of calystegine A7

A straightforward chiral pool synthesis for the glycosidase inhibitor calystegine A₇ (isolated from Lycium chinense) from methyl α-d-glucopyranoside is described. Keysteps of this synthesis include a ultrasound assisted Zn-mediated tandem ring opening reaction followed by a Grubbs' catalyst mediated ring closure metathesis.     

Total synthesis of clavosolide A

For the total synthesis of (−)-clavosolide A described herein, a Schmidt glycosidation reaction was used to attach the sugar moiety at an early stage in the synthesis to the 4-hydroxy group of the substituted tetrahydropyran unit of the molecule, which itself was built following a Ti(III)-mediated method developed by us earlier, and at the end, it was the Yamaguchi reaction that was successfully employed for the cyclodimerization of the two halves of the molecule leading to its total synthesis.     

Total synthesis of (−)-clavosolide A

The total synthesis of (−)-clavosolide A is achieved employing a radical-mediated route to build the substituted tetrahydropyran unit, a Yamaguchi reaction to construct the diolide aglycon and the Schmidt method for the final glycosidation step.     

Studies directed towards the total synthesis of clavosolides: synthesis of an isomer of clavosolide A

The total synthesis of clavosolide A, employing a radical-mediated route to build its substituted tetrahydropyran unit, a Yamaguchi reaction to construct the diolide aglycon and the Schmidt method for the final glycosidation step, revealed that the reported structure is an isomer of the natural product.     

Total synthesis of Δ-PGJ2, 15-deoxy-Δ-PGJ2, and related compounds

A key cyclopentenone possessing the α-chain was synthesized from TBS ether of 4-cyclopentene-1,3-diol monoacetate, and submitted to aldol reaction at the α^′-position with the ω-chain aldehydes followed by dehydration to produce the title compounds. In a similar manner, 5-dehydro compounds (acetylene analogues) were synthesized successfully. In addition, palladium-catalyzed reaction of 4-cyclopentene-1,3-diol monoacetate with methyl malonate, the first step of the synthesis, was improved to afford the product in high yield by using t-BuOK or LDA in place of NaH.     

Stereocontrolled synthesis of quinine and quinidine

Disubstituted cyclopentene was prepared from cyclopentene monoacetate and transferred into disubstituted piperidine via oxidative cleavage of the olefin moiety followed by piperidine ring formation. The piperidine was then condensed at the side chain with a quinoline part to afford the olefin precursor of quinine. Finally, the olefin was converted into quinine through the corresponding epoxide. Quinidine was synthesized in a similar way.     

A new one-pot synthesis of Gb3 and isoGb3 trisaccharide analogues

Gb₃ and isoGb₃ are both biologically important oligosaccharides. A new efficient synthesis of Gb₃ and isoGb₃ trisaccharide analogues has been achieved by one-pot sequential glycosylation strategy starting from simple monosaccharide building blocks promoted by N-(phenylthio)-?-caprolactam at room temperature.     

A fast synthesis for Zintl phase compounds of Na3SbTe3, NaSbTe2 and K3SbTe3 by microwave irradiation

The microwave irradiation technique was used to prepare three Zintl phase compounds Na₃SbTe₃, NaSbTe₂ and K₃SbTe₃. The as-prepared products were analyzed and characterized by XRD, EDX and SEM techniques. Higher microwave oven power and shorter irradiation time are required for the synthesis of Na₃SbTe₃, whereas lower oven power and longer irradiation time are needed for NaSbTe₂. Moderate microwave irradiation conditions facilitate the formation of pure K₃SbTe₃. Pure phase of Na₃SbTe₃ are directly obtained by this technique for the first time. Compared with the traditional high-temperature solid-state synthesis, the microwave reaction required a considerable shortened reaction time for the preparation of the three Zintl compounds. The initial driving force for these reactions originates from the interaction of microwave electric field with alkali metals (Na and K) and Sb powders.     

Stereoconvergent synthesis of C1-C17 and C18-C25 fragments of bafilomycin A1

The effective syntheses of the enantiomerically pure C1-C17 2 and C18-C25 3 fragments as promising synthetic intermediates of bafilomycin A₁, 1 have been achieved.     

Synthesis of novel analogues of antimycin A3

Four novel analogues of antimycin A₃, 1a-d, were synthesized in good overall yields.     

Template synthesis of heterostructured polyaniline/Bi2Te3 nanowires

Heterostructured polyaniline/Bi₂Te₃ nanowires have been prepared by chemical and electrochemical reactions on a porous alumina template. Its morphology and structure have been studied by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and electron probe microanalysis. The microscope analysis reveals that Bi₂Te₃ is well enveloped in polyaniline tubules in pores of alumina template. This microscopic material shows possible application in microthermoelectric device.     

Ni-P-Zn3(PO4)2(ZnSnO3、ZnSiO3)纳米复合化学镀层性质和组成的研究

研究了温度、时间、浓度等对Ａ３钢片上Ｎi-P-Zn3(PO4)2、Ni-P-ZnSnO3和Ｎi-P-ZiSiO3纳米复合合化学镀层外貌的影响,用扫描电子显微镜（ＳＥＭ）观察外貌、称重法测定厚度;通过１０％ＮaCl溶液、１％Ｈ２Ｓ气体加速腐蚀试验,１０％ＣuSO4溶液点滴试验等多种手段测定其耐腐蚀性能,用Ｘ－射线光电子谱（ＸＰＳ）及俄歇电子能谱（ＳＥＳ）测定其价态组成,结果表明：在最佳施镀条件下,可得光亮、致密、耐腐蚀性强于Ａ３钢、磷化膜及Ｎi-P镀层的纳米复合化学镀层,镀层的原子百分组成约为（％）：Ｎi-P-Zn3(PO4)2:Ni70.00,P12.47,Zn3(PO4)213.93,C3.6;Ni-P-ZnSnO3;Ni77.56,P10.00,ZnSnO39.84,C2.6;Ni-P-NiSiO3,Ni83.00,P10.96,ZnSi5.15,C0.89.     

Hydrothermal synthesis and luminescent properties of Sb-doped Sr3(PO4)2

Sb³⁺-doped Sr₃(PO₄)₂ crystals has been synthesized using phosphoric acid, strontium hydroxide and antimony powder as the raw materials through a hydrothermal reaction method. The crystallinity and the microstructure were investigated using X-ray diffraction and scanning electron microscopy. The photoluminescent property was investigated using luminescent spectrometer. Phase pure Sr₃(PO₄)₂ crystal was obtained and it has a shape of hexagonal rod. It showed the emission and excitation peaks at 396, 250, and 215 nm, respectively, indicating that the emission is attributed to ³P₁-¹S₀ transition and the excitation is attributed to ¹S₀-³P₁ and ¹S₀-¹P₁ transition. It was also observed that the intensity of photoluminescence is thermally stable up to 673 K.     

Synthesis of (+)-prelactone B

Radical-mediated opening of a trisubstituted epoxy alcohol using cp₂TiCl was followed by diastereoselective reduction of the resulting product with a centrally located methylene group, flanked on both sides by two chiral hydroxyl-bearing carbons, to build all the three chiral centers of (+)-prelactone B 1 in their desired stereochemistries leading to the total synthesis of the molecule.     

Non-centrosymmetric Ba3Ti3O6(BO3)2

The compound previously reported as Ba₂Ti₂B₂O₉ has been reformulated as Ba₃Ti₃B₂O₁₂, or Ba₃Ti₃O₆(BO₃)₂, a new barium titanium oxoborate. Small single crystals have been recovered from a melt with a composition of BaTiO₃:BaTiB₂O₆ (molar ratio) cooled between 1100°C and 850°C. The crystal structure has been determined by X-ray diffraction: hexagonal system, non-centrosymmetric space group, a=8.7377(11) Å, c=3.9147(8) Å, Z=1, wR(F²)=0.039 for 504 unique reflections. Ba₃Ti₃O₆(BO₃)₂ is isostructural with K₃Ta₃O₆(BO₃)₂. Preliminary measurements of nonlinear optical properties on microcrystalline samples show that the second harmonic generation efficiency of Ba₃Ti₃O₆(BO₃)₂ is equal to 95% of that of LiNbO₃.     

Total synthesis of natural (+)-hyacinthacine A6 and non-natural (+)-7a-epi-hyacinthacine A1 and (+)-5,7a-diepi-hyacinthacine A6

Naturally occurring (1S,2R,3R,5R,7aR)-1,2-dihydroxy-3-hydroxymethyl-5-methylpyrrolizidine [(+)-hyacinthacine A₆, 2] together with unnatural (1S,2R,3R,7aS)-1,2-dihydroxy-3-hydroxymethylpyrrolizidine [(+)-7a-epi-hyacinthacine A₁, 3] and (1S,2R,3R,5S,7aS)-1,2-dihydroxy-3-hydroxymethyl-5-methylpyrrolizidine [(+)-5,7a-diepi-hyacinthacine A₆, 4] have been synthesized from a DALDP derivative [5, (2R,3S,4R,5R)-3,4-dibenzyloxy-2′-O-tert-butyldiphenylsilyl-2,5-bis(hydroxymethyl)pyrrolidine], as the homochiral starting material. The synthetic process employed took advantages of Wittig methodology followed by internal lactamization, in the case of (+)-7a-epi-hyacinthacine A₁ (3), and reductive amination for (+)-hyacinthacine A₆ (2) and (+)-5,7a-diepi-hyacinthacine A₆ (4).     

Synthesis and characterization of MgF2 and KMgF3 nanorods

MgF₂ nanorods with diameters of 60-100 nm were synthesized by a microemulsion method. Subsequent hydrothermal reaction of as-synthesized MgF₂ nanorods and KF at 240°C for 3 days or 140°C for 7 days resulted in KMgF₃ nanorods, which retained the rod-like morphology of the source material MgF₂ in the reaction process. The morphology of as-synthesized MgF₂ strongly depended on the molar ratio between water and the surfactant CTAB and the concentration of CTAB.