Excess molar enthalpies of methylformate + (1-propanol, 2-propanol, 1-butanol, 2-butanol and 1-pentanol) at T = 298.15 K, p = (5.0, 10.0) MPa, and methylformate + 1-propanol at T = 333.15 K, p = 10.0 MPa

A high pressure flow-mixing isothermal calorimeter is used to determine the excess molar enthalpies of methylformate + (1-propanol, 2-propanol, 1-butanol, 2-butanol and 1-pentanol) at T = 298.15 K and p = (5.0, 10.0) MPa, and methylformate + 1-propanol at T = 333.15 K and p = 10.0 MPa. The Redlich-Kister equation is fit to the experimental results.     

Synthesis, structure and dynamic stereochemistry of (O → Si)-chelate N-(trifluorosilylmethyl)-[N-(S)-(1-phenylethyl)]acetamide and 1-(trifluorosilylmethyl)-2-oxoperhydroazepine: Retention of the O → Si coordination in the adduct with KF and 18-crown-6

The novel compounds, N-(trifluorosilylmethyl)-[N-(S)-(1-phenylethyl)]-acetamide (1a) and 1-(trifluorosilylmethyl)-2-oxoperhydroazepine (1b) have been prepared from the corresponding NH-compounds using ClCH₂SiCl₃/Et₃N or ClCH₂SiCl₃/(Me₃Si)₂NH followed by methanolysis or hydrolysis of the reaction mixture in the presence of Lewis bases, and then BF₃ etherate. Potassium-(18-crown-6)-(2-oxoperhydroazepinomethyl)tetrafluorosilicate (2) was synthesized by reaction of the trifluoride (1b) with KF in the presence of 18-crown-6. Using ¹⁹F, ²⁹Si NMR and X-ray diffraction techniques it was established that the silicon atom is pentacoordinate in the trifluorides (1a, b) and hexacoordinate in the adduct 2. Thus the internal coordination of the O → Si bond present in the trifluoride (1b) is retained in the adduct 2.The stereochemical non-rigidity of the trifluorides (1a, b) and the N-(trifluorosilylmethyl)-N-methylacetamide (1c) was investigated using dynamic ¹⁹F NMR spectroscopy. The activation barriers for permutational isomerization are in the range 9.5-10 kcal mol⁻¹. Lower values of ΔG^# for permutation of trifluorides (1a-c) compared to the monofluorides with the coordination core OSiC₃F together with small negative values for the activation entropy implies a non-dissociative mechanism. Quantum-chemical analysis suggests a mechanism involving a turnstile rotation.     

The (p, ρ, T) of (methanol + benzene) and (methanol + ethylbenzene)

The (p, ρ, T) of methanol, ethylbenzene and (methanol + benzene) and (methanol + ethylbenzene) at temperatures between (290 and 500) K and pressures in the range (0.1 to 60) MPa have been measured with a magnetic suspension densimeter with an uncertainty of ±0.1%. Our measurements with methanol deviate from the literature values by less than 0.2%. The (p, ρ, T) measurements were fitted with experimental uncertainties by an empirical equation. The temperature and mole fraction dependence of the coefficients of the equation of state are presented.     

Density-functional study for the NOx (x = 1, 2) dissociation mechanism on the Cu(1 1 1) surface

Spin-polarized density functional theory calculation is employed to study the adsorption and dissociation of NO₂ molecule on Cu(1 1 1) surface. It is shown that the most favorable adsorption structure is the NO₂ (T,T-O-,O′-nitrito) configuration which has an adsorption energy of −1.49 eV. The barriers for step-wise NO₂ dissociation reaction, NO_2(g) → N_(a) + 2O_(a), are 1.05 (for O–N–O bond activation), and 2.08 eV (for N–O bond activation), respectively, and the entire process is 0.6 eV exothermic. The energetics of single N–O dissociation with and without the presence of N atom or O atom on the surface are also calculated. The results indicate that in the presence of O atom on Cu(1 1 1) surface would raise the N–O dissociation barrier, whereas in the presence of N atom decrease it. The interaction nature between adsorbates and substrate is analyzed by the local density of states (LDOS) calculation.     

Design and construction of an adiabatic calorimeter for samples of less than 1 cm in the temperature range T = 15 K to T = 350 K

A small-scale adiabatic calorimeter has been constructed as part of a larger project to study the thermodynamics of nanomaterials and to facilitate heat capacity measurements on samples of insufficient quantity to run on our current large-scale adiabatic apparatus. This calorimeter is designed to measure the heat capacity of samples whose volume is less than 0.8 cm³ over a temperature range of T = 13 K to T = 350 K. Heat capacity results on copper, sapphire, and benzoic acid show the accuracy of the measurements to be better than ±0.4% for temperatures higher than T = 50 K. The reproducibility of these measurements is generally better than ±0.25%.     

(p, ρ, T) properties, and apparent molar volumes V? of ZnBr2 in methanol at T = (298.15 to 398.15) K and pressures up to p = 40 MPa

The (p, ρ, T) properties of pure methanol, the (p, ρ, T) properties and apparent molar volumes V_? of ZnBr₂ in methanol at T = (298.15 to 398.15) K and pressures up to p = 40 MPa are reported, and apparent molar volumes have been evaluated. The experimental (p, ρ, T, m) values were described by an equation of state. For the solutions the experiments were carried out at molalities m = (0.05772, 0.37852, 0.71585 and 1.95061) mol · kg⁻¹ of zinc bromide.     

Liquid phase equilibria of (water + phosphoric acid + 1-butanol or butyl acetate) ternary systems at T = 308.2 K

(Liquid + liquid) equilibria and tie lines for the ternary systems of (water + phosphoric acid + 1-butanol) and (water + phosphoric acid + butyl acetate) were measured at T = 308.2 K. The experimental ternary (liquid + liquid) equilibrium data were correlated with the UNIQUAC model. The reliability of the experimental tie lines was confirmed using Othmer-Tobias correlation. The average root-mean-square deviation (RMSD) values of (water + phosphoric acid + 1-butanol) and (water + phosphoric acid + butyl acetate) systems were 2.17% and 2.16%, respectively. Distribution coefficients and separation factors were measured to evaluate the extracting capability of the solvents. The results show that butyl acetate may be considered as a reliable organic solvent for the extraction of phosphoric acid from aqueous solutions.     

(Liquid + liquid) equilibria of the quaternary system methanol + isooctane + cyclohexane + benzene at T = 303.15 K

Tie line data of the ternary system {methanol + isooctane + cyclohexane} were obtained at T = 303.15 K. A quaternary system containing these three compounds and benzene was also studied at the same temperature, while data for {methanol + benzene + cyclohexane} and {methanol + benzene + isooctane} were taken from literature. In order to obtain the binodal surface of the quaternary system, four quaternary sectional planes with several cyclohexane/isooctane ratios were studied. The distribution of benzene between both phases was also analysed. Ternary experimental results were correlated with the UNIQUAC and NRTL equations and compared with predictions using the UNIFAC group contribution method.     

Enantioselective synthesis of (−)-(1R,2R)-1,2-dihydrochrysene-1,2-diol

A general chiral building block containing the 1R,2R-trans-diol moiety was constructed utilizing the stereoselective Shi-epoxidation reaction on a tetralone scaffold assembled by a Negishi cross-coupling on N,N-diethylbenzamide. Further elaboration of this chiral building block into polycyclic aromatic compounds was demonstrated with the total synthesis of the precursor for the most carcinogenic metabolite of chrysene, (−)-(1R,2R)-1,2-dihydrochrysene-1,2-diol in 87% ee.     

Structural and electronic properties of CenO2n (n = 1-5) nanoparticles: A computational study

Understanding the electronic structures and properties of different size CeO₂ nanoparticles is very important for further application in the field of catalysis used in several promising materials. In this study, we have elucidated the electronic analyses of (CeO₂)_n (n = 1-5) nanoparticles through first-principle density-functional theory approach. All structures with the global minimal energies are obtained by fire algorithm combining simulated annealing method and then are further re-optimized by DMol³ program with double numerical atomic basis sets. Two useful analyzed methods (Fukui function and electronic density of state) are calculated to explain the chemical reactivity of different sites for (CeO₂)_n (n = 1-5) nanoparticles.     

Ternary (liquid + liquid) equilibria of the azeotrope (ethyl acetate + 2-propanol) with different ionic liquids at T = 298.15 K

Experimental (liquid + liquid) equilibria involving ionic liquids {1,3-dimethylimidazolium methyl sulfate (MMIM MeSO₄)}, {2-propanol + ethyl acetate + 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM PF₆)} and {2-propanol + ethyl acetate + 1-hexyl-3-methylimidazolium hexafluorophosphate (HMIM PF₆)} were carried out to separate the azeotropic mixture ethyl acetate and 2-propanol. Selectivity and distribution ratio values, derived from the tie-lines data, were presented in order to analyze the best separation solvent in a liquid extraction process. Experimental (liquid + liquid) equilibria data were compared with the correlated values obtained by means of the NRTL, Othmer-Tobias and Hand equations. These equations were verified to accurately correlate the experimental data.     

(p, Vm, T) measurements of (cyclohexane + nonane) at temperatures from 298.15 K to 328.15 K and at pressures up to 40 MPa

The densities and speeds of sound of (cyclohexane + nonane) were measured at four temperatures from 298.15 K to 328.15 K, and the respective values of excess volumes and adiabatic compressibility were calculated. Thereafter, the densities for the last system were measured at elevated pressures (0.1 to 40) MPa at four temperatures over the range 298.15 K to 328.15 K with a high-pressure apparatus. The high-pressure density data were fitted to the Tait equation and the isothermal compressibilities were calculated with a novel procedure with the aid of this equation. The low- and high-pressure values of calculated from the density data show that the deviations from ideal behaviour in the system decrease slightly as the temperature and pressure are raised. The data were fitted to the fourth-order Redlich-Kister equation, with the maximum likelihood principle being applied for the determination of the adjustable parameters.     

Preparation, crystal structures, EPR and reflectance spectra of two new charge-transfer salts, [CpFeCpCH2N(CH3)3]4[XMo12O40] · nCH3CN (n = 0 for X = P or n = 1 for X = Ge)

Two new charge-transfer salts, [CpFeCpCH₂N(CH₃)₃]₄[PMo₁₂O₄₀] · CH₃CN (1) and [CpFeCpCH₂N(CH₃)₃]₄[GeMo₁₂O₄₀] (2), were synthesized by the traditional solution synthetic method and their structures were determined by single-crystal X-ray analysis. Salt 1 belongs to the triclinic space group P1, and salt 2 belongs to the triclinic space group . There exist the complex interactions of the cationic ferrocenyl donor and Keggin polyanion in the solid state. The solid state UV-Vis diffuse reflectance spectra indicate the presence of a charge-transfer band climbing from 450 nm to well beyond 900 nm for 1, a charge-transfer band from 460 to 850 nm with λ_max = 630 nm for 2.The EPR spectra of salts 1 and 2 at 77 K show a signal at g = 2.0048 and 1.9501, respectively, ascribed to the delocalization of one electron in reduced Keggin ion in salt 1 and the Mo^VI in [GeMo₁₂O₄₀]⁴⁻ is partly reduced to Mo^V owing to the charge-transfer transitions taking place between the ferrocenyl donors and the POM acceptors. The two compounds were also characterized by IR spectroscopy and cyclic voltammetry.     

Dinitrogen extrusion from diazidophenylborane: Computational analysis of PhBNx (x = 6, 4, 2) isomers

The energies and structures of possible intermediates in the dinitrogen extrusion from diazidophenylborane 4a to give phenylborylene 11a were determined using density functional (B3LYP), multiconfigurational (CASSCF and MRMP2), and coupled cluster (CCSD(T)) computations in conjunction with basis sets of up to cc-pVTZ quality. Formation of 11a and nitrogen from 4a is an exothermic process (−21 kcal mol⁻¹). The triplet electronic ground state of azidophenylborylnitrene 5a (PhBN₄) is only 26 kcal mol⁻¹ higher in energy than 4a and the phenyl shift in 5a to yield N-azidophenyliminoborane 7a is highly exothermic.     

Isothermal vapor-liquid equilibrium at T = 333.15 K and excess volumes and molar refractivity deviation at T = 298.15 K for the ternary mixtures {di-methyl carbonate (DMC) + ethanol + benzene} and {DMC + ethanol + toluene}

Isothermal vapor-liquid equilibrium data at 333.15 K are reported for the ternary systems {di-methyl carbonate (DMC) + ethanol + benzene} and {DMC + ethanol + toluene} as determined with headspace gas chromatography. The experimental ternary vapor-liquid equilibrium (VLE) data were correlated with different activity coefficient models. The excess volume (V^E) and deviations in molar refractivity (ΔR) data are reported for the binary systems {DMC + benzene} and {DMC + toluene} and also for the ternary systems {DMC + ethanol + benzene} and {DMC + ethanol + toluene} at 298.15 K. These V^E and ΔR data were correlated with the Redlich-Kister equation for binary systems and the Cibulka equation for ternary systems.     

Syntheses,structures and luminescent properties of four copper(I) cyanide coordination polymers based on 2-(n-pyridyl)benzimidazole ligands (n = 2, 3, 4)

Four copper(I) cyanide coordination polymers containing 2-(n-pyridyl)benzimidazole ligands, namely [Cu₂(CN)(2-PyBIm)]_n (1), [Cu₂(CN)₂(3-PyHBIm)]_n (2), {[Cu₃(CN)₃(4-PyHBIm)₄] · 2H₂O}_n (3) and [Cu₅(CN)₃(4-PyBIm)₂]_n (4), have been synthesized and characterized by X-ray crystallography. Complex 1 is a one-dimension coordination polymer in which 2-(2-pyridyl)benzimidazole is deprotonated and adopts a bridging tridentate coordination mode. Complex 2 has ladder-like structure in which 2-(3-pyridyl)benzimidazole does not deprotonate and acts as a bidentate bridge. Complex 3 displays a saddle-shaped helical chain constructed through μ₂-cyanide group and the outstretched neutral 2-(4-pyridyl)benzimidazole monodentate ligand. Complex 4 shows two-dimension layer polymeric structure in which deprotonated 2-(4-pyridyl)benzimidazole acts as a tridentate bridging ligand. The cyanide groups in four complexes all act as bidentate bridging ligands. These complexes are thermal stable and display luminescence in the solid states.     

Thermodynamic properties of hydrochloric acid in mixed solvents: {HCl(mA) + NaCl(mB)} in {(1 − x)H2O + xd-fructose} at T = (278.15 to 318.15) K

The thermodynamic properties of system (HCl + NaCl + C₆H₁₂O₆ + H₂O) were studied by e.m.f. measurement in the cells without liquid junction:

(A)     

Intramolecular hydrogen bonding allows simple enaminones to structurally mimic the i, i + 4, and i + 7 residues of an α-helix

An intramolecularly hydrogen bonded enaminone scaffold was designed and synthesized in order to mimic the i, i + 4, and i + 7 residues of an α-helix. The resonance stabilized vinylogous amide group serves as an aromatic ring isostere and allows the positioning and angular projection of the R-groups in a manner similar to an α-helix.     

Ti(II)-mediated domino cyclization of 2-functionalized 1-halo-2,n-enynes (n = 7, 8) to bicyclic compounds

The reaction of 2-functionalized 1-halo-2,n-enynes (n = 7 or 8) with a divalent titanium reagent, Ti(O-i-Pr)₄/2i-PrMgCl, proceeded in a domino fashion to afford bicyclic compounds in good yields.     

Template-directed synthesis of macrocyclic aminopyridines: azacalix[n](2,6)pyridines (n = 3, 4)

Template-induced synthetic routes for azacalix[n](2,6)pyridines (n = 3, 4) have been elaborated. The proton and nickel ion served as the efficient template for the cyclization reactions, and the presence of the templates preferentially afforded the cyclic trimers and tetramers in moderate to good yields, respectively. The compatibility of the cyclic tetramer with nickel ion was also confirmed by X-ray crystallography.