Crystal growth, structure determination, and optical properties of new potassium-rare-earth silicates K3RESi2O7 (RE=Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu)

Single crystals of K₃RESi₂O₇ (RE=Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu) were grown from a potassium fluoride flux. Two different structure types were found for this series. Silicates containing the larger rare earths, RE=Gd, Tb, Dy, Ho, Er, Tm, Yb crystallize in a structure K₃RESi₂O₇ that contains the rare-earth cation in both a slightly distorted octahedral and an ideal trigonal prismatic coordination environment, while in K₃LuSi₂O₇, containing the smallest of the rare earths, lutetium is found solely in an octahedral coordination environment. The structure of K₃LuSi₂O₇ crystallizes in space group P6₃/mmc with a=5.71160(10) Å and c=13.8883(6) Å. The structures containing the remaining rare earths crystallize in the space group P6₃/mcm with the lattice parameters of a=9.9359(2) Å, c=14.4295(4) Å, (K₃GdSi₂O₇); a=9.88730(10) Å, c=14.3856(3) Å, (K₃TbSi₂O₇); a=9.8673(2) Å, c=14.3572(4) Å, (K₃DySi₂O₇); a=9.8408(3) Å, c=14.3206(6) Å, (K₃HoSi₂O₇); a=9.82120(10) Å, c=14.2986(2) Å, (K₃ErSi₂O₇); a=9.80200(10) Å, c=14.2863(4) Å, (K₃TmSi₂O₇); a=9.78190(10) Å, c=14.2401(3) Å, (K₃YbSi₂O₇). The optical properties of the silicates were investigated and K₃TbSi₂O₇ was found to fluoresce in the visible.     

PbCu3(OH)(NO3)(SeO3)3·1/2H2O und Pb2Cu3O2(NO3)2(SeO3)2: Synthese und Kristallstrukturuntersuchung

Crystals of PbCu₃(OH)(NO₃)(SeO₃)₃·1/2H₂O [a=7.761(3)Å,b=9.478(4)Å,c=9.514(4)Å, =66.94(2)°, =69.83(2)°, =81.83(2)°, space group P ,Z=2] and Pb₂Cu₃O₂(NO₃)₂(SeO₃)₂ [a=5.884(2)Å,b=12.186(3)Å,c=19.371(4)Å, space group Cmc2₁,Z=4] were synthesized under hydrothermal conditions. Their crystal structures were refined with three-dimensional X-ray data toR _w=0.033 resp. 0.055. In PbCu₃(OH)(NO₃)(SeO₃)₃·1/2H₂O the Cu atoms are [4+1] and [4+2] coordinated and via SeO₃ groups a three-dimensional atomic arrangement is built up. In Pb₂Cu₃O₂(NO₃)₂(SeO₃)₂ there are sheets, which are connected only via Pb-O bonds ranging from 2.98 Å to 3.16 Å.

     

Synthesis, Structure, and 31P NMR of Sulfur/Oxygen-Bridged Incomplete Cubane-Type Molybdenum and Tungsten Clusters with Triphenylphosphine Ligands

Sulfur/oxygen-bridged incomplete cubane-type triphenylphosphine molybdenum and tungsten-clusters [Mo₃S₄Cl₄(H₂O)₂(PPh₃)₃]·3THF (1A), [Mo₃S₄Cl₄(H₂O)₂(PPh₃)₃]·2THF (2A), [Mo₃OS₃Cl₄(H₂O)₂(PPh₃)₃]·2THF (1B), and [W₃S₄Cl₄(H₂O)₂(PPh₃)₃]·2THF (1C) were prepared from the corresponding aqua clusters and PPh₃ in THF/MeOH. On recrystallization from THF, procedures with and without addition of hexane to the solution gave 1A and 2A, respectively, while the procedures gave no effect on the formation of 1B and 1C. Crystallographic results obtained are as follows: 1A: monoclinic, P2₁/n, a=17.141(4) Å, b=22.579(5) Å, c=19.069(4) Å, =96.18(2)°, V=7337(3) ų, Z=4, R(R _w)=0.078(0.102); 1C: monoclinic, P2 ₁/c, a=12.635(1) Å, b=20.216(4) Å, c=27.815(3) Å, =96.16(1)°, V=7062(2) ų, Z=4, R(R _w)=0.071(0.083). If the phenyl groups are ignored, the molecule [Mo₃S₄Cl₄(H₂O)₂(PPh₃)₃] in 2A has idealized CS symmetry with the mirror plane perpendicular to the plane determined by the metal atoms, while the molecule in 1A does not have the symmetry. The tungsten compound 1C is isomorphous with the molybdenum compound 2A. ³¹P NMR spectra of 1A, 2A, and 1C were obtained and compared with similar clusters with dmpe (1,2-bis(dimethylphosphino)ethane) ligands.     

Crystal structures of Co3(SeO3)3·H2O and Ni3(SeO3)3·H2O,two new isotypic compounds

Summary The crystal structures of the new, hydrothermally synthesized, isotypic compounds Co₃(SeO₃)₃·H₂O and Ni₃(SeO₃)₃·H₂O were determined by direct and Fourier methods and refined toR _w=0.023, 0.032 using single crystal X-ray data up to sin/=0.81 Å^–1 [space group P ,a=8.102 (2), 7.986 (3) Å;b=8.219 (2), 8.133 (3) Å;c=8.572 (2), 8.422 (3) Å, =69.15 (1), 69.50 (1)°; =62.88 (1), 62.50 (1)°; =67.23 (1), 67.64 (1)°;Z=2]. The structures are built up from [Me ₅(SeO₃)₆·2H₂O]^2– sheets containing three crystallographically different types of octahedrally coordinatedMe ²⁺ and trigonal pyramidal coordinated Se⁴⁺ atoms, respectively. These sheets are linked only by a fourth type ofMe ^2+[6] atom. All coordination polyhedra deviate significantly from their ideal shapes, bond lengths within the extremly distortedMe(4)O₆ polyhedra range from 1.983 (2) Å to 2.403 (2) Å in Co₃(SeO₃)₃·H₂O and from 1.987 (4) Å to 2.301 (3) Å in the Ni compound, O-Se-O bond angles were found between 92.8 (2)° and 104.9 (1)°. Hydrogen bond lengths are 2.802 (3)Å and 2.600 (4)Å in the Co compound, and 2.762 (6) Å and 2.561 (6) Å in Ni₃(SeO₃)₃·H₂O. The latter is one of the shortest known hydrogen bonds donated by a water molecule.

---

Die Kristallstrukturen von Co₃(SeO₃)₃·H₂O und Ni₃(SeO₃)₃·H₂O, zwei neue isotype Verbindungen

Zusammenfassung Die Kristallstrukturen der neuen, hydrothermal synthetisierten, isotypen Verbindungen Co₃(SeO₃)₃·H₂O und Ni₃(SeO₃)₃·H₂O wurden mit direkten und Fourier-Methoden bestimmt und unter Verwendung von Einkristallröntgendaten bis sin/=0.81 Å^–1 aufR _w-Werte von 0.023, 0.032 verfeinert [Raumgruppe P ,a=8.102 (2), 7.986 (3) Å;b=8.219 (2), 8.133 (3) Å;c=8.572 (2), 8.422 (3) Å, =69.15 (1), 69.50 (1)°; =62.88 (1), 62.50 (1)°; =67.23 (1), 67.64 (1)°;Z=2]. Die Strukturen werden von [Me ₅(SeO₃)₆·2H₂O]^2– Schichten aufgebaut, die je drei kristallographisch unterschiedliche Arten von oktaedrisch koordiniertenMe ²⁺ und trigonal pyramidal koordinierten Se⁴⁺ Atomen enthalten. Diese Schichten sind nur durch eine vierte Art vonMe ^2+[6] Atomen verknüpft. Alle Koordinationspolyeder weichen deutlich von ihren Idealformen ab, Bindungslängen in den extrem verzerrtenMe(4)O₆ Polyedern variieren zwischen 1.983 (2) Å und 2.403 (2) Å in Co₃(SeO₃)₃·H₂O und zwischen 1.987 (4) Å und 2.301 (3) Å in der Ni-Verbindung, O-Se-O-Bindungswinkel liegen zwischen 92.8 (2)° und 104.9 (1)°. Wasserstoffbrückenlängen sind 2.802 (3) Å und 2.600 (4) Å in der Co-Verbindung, und 2.762 (6) Å und 2.561 (6) Å in Ni₃(SeO₃)₃·H₂O. Letztere ist eine der kürzesten bekannten Wasserstoffbrücken eines Wassermoleküls.

     

Zur Kenntnis der wasserhaltigen schichtförmigen Alkali- und Erdalkali-Thiochromite der FormelM x (H2O) y CrS2

Two different polytypic series (2s and 3s) of layered alkali and alkaline earth thiochromites of formulaM _x(H₂O) _y CrS₂ (x=0.2–0.4;y=0.18–0.5) were prepared by topotactic ion exchange in 2H- and 3R- K _x (H₂O) _y CrS₂. The products were studied by TGA and X-ray diffraction techniques. Hydrates with monomolecular (hydrates I) and bimolecular (hydrates II) water layers between the CrS₂ slabs were observed. In the 3s series the CrS₂ layers are stacked according to 3R (Ib) (hydrates I) and 3R (Ia) (hydrates II) structures. In the 2s series the layer stacking leads to a 2H (Ib) structure and to a new orthorhombic 2 O structure.

Herrn Prof. Dr.K. Komarek zu seinem 60. Geburtstag gewidmet.     

Thermal decomposition of cobalt nitrato compounds: Preparation of anhydrous cobalt(II)nitrate and its characterisation by Infrared and Raman spectra

The thermal decomposition of Co(NO₃)₂·6H₂O (1) as well as that one of NO[Co(NO₃)₃] (Co(NO₃)₂·N₂O₄) (2) was followed by thermogravimetric (TG) measurements, X-ray recording and Raman and IR spectra. The stepwise decomposition reactions of 1 and 2 leading to anhydrous cobalt(II)nitrate (3) were established. In N₂ atmosphere, cobalt oxides are finally formed whereas in H₂/N₂ (10% H₂) cobalt metal is produced. Rapid heating of cobalt(II)nitrate hexahydrate causes melting (formation of a hydrate melt) and therefore side reactions in the hydrate melt by incoupled reactions and evolution/evaporation of different species as, e.g., HNO₃, NO₂, etc. In case of larger amounts in dense packing in the sample container, the formation of oxo(hydoxo)nitrates is possible at higher temperature. For 2, its thermal decomposition to 3 was followed and its decomposition mechanism is proposed.     

Phenoxide-assisted P-C bond cleavage in PdCl2(PPh3)2 under very mild conditions

PdCl₂(PPh₃)₂ reacted with NaOAr (Ar = Ph, p-tolyl) at 0 °C to afford PdCl(Ph)(PPh₃)₂, instead of PdCl(OAr)(PPh₃)₂, in 12-16% isolated yields based on Pd. The structure was confirmed by NMR and X-ray crystallography. GC-MS analysis of the reaction solution revealed that OPPh₂(OAr), OPPh(OAr)₂, and OP(OAr)₃ are formed, while NMR studies indicated that PdCl(Ph)(PPh₃)₂ is produced when PdCl(OAr)(PPh₃)₂ decomposes. The reaction of PdCl₂(PPh₃)₂ with Bu₃Sn(OC₆H₄-p-OMe) also gave PdCl(Ph)(PPh₃)₂ in 8% isolated yield. These results suggest that PdCl(OAr)(PPh₃)₂ is highly labile and the aryloxy ligand exchanges with the phenyl groups in triphenylphosphine even under very mild conditions.     

Direct dynamics studies for the reactions of CF3CHFCF3 and CF3CF2CHF2 with H atoms

The rate constants of the hydrogen abstraction reactions of CF₃CHFCF₃ + H (R1) and CF₃CF₂CHF₂ + H (R2) have been calculated by means of the dual-level direct dynamics method. Optimized geometries and frequencies of stationary points and extra points along the minimum-energy path (MEP) are obtained at the MPW1K/6-311+G(d,p) level, and the classical energetic information is further corrected with the interpolated single-point energy (ISPE) approach by the G3(MP2) level of theory. Using the canonical variational transition state theory (CVT) with small-curvature tunneling corrections (SCT), the rate constants are evaluated over a wide temperature range of 200-2000 K. The calculated CVT/SCT rate constants are in good agreement with available experimental values. It is found that the variational effect is very small and almost negligible over the whole temperature region. However, the small-curvature tunneling correction plays an important role in the lower temperature range. Furthermore, the heats of formation of species CF₃CF₂CHF₂ (SC₁ or SC₂) and CF₃CF₂CF₂ are studied using isodesmic reactions to further elucidate the thermodynamic properties.     

Preparation and photocatalytic activity of Sb2S3/Bi2S3 doped TiO2 from complex precursor via gel-hydrothermal treatment

Sb₂S₃/Bi₂S₃ doped TiO₂ were prepared with the coordination compounds [M(S₂CNEt)₃] (M=Sb, Bi; S₂CNEt=pyrrolidinedithiocarbamate) as precursors via gel-hydrothermal techniques. The doped TiO₂ were characterized by XRD, SEM, XPS and UV-vis diffuse reflectance means. The photocatalyst based on doped TiO₂ for photodecolorization of 4-nitrophenol (4-NP) was examined. The optimal Bi₂S₃/Sb₂S₃ content, pH and different doped techniques have been investigated. Photocatalytic tests reveal that M₂S₃ doped TiO₂ via the gel-hydrothermal route performs better photocatalytic activity for photodegradation reaction of 4-nitrophenol (4-NP).     

Synthesis, crystal structure, infrared and Raman spectra of Sr4Cu3(AsO4)2(AsO3OH)4·3H2O and Ba2Cu4(AsO4)2(AsO3OH)3

The two new compounds, Sr₄Cu₃(AsO₄)₂(AsO₃OH)₄·3H₂O (1) and Ba₂Cu₄(AsO₄)₂(AsO₃OH)₃(2), were synthesized under hydrothermal conditions. They represent previously unknown structure types and are the first compounds synthesized in the systems SrO/BaO-CuO-As₂O₅-H₂O. Their crystal structures were determined by single-crystal X-ray diffraction [space group C2/c, a=18.536(4) Å, b=5.179(1) Å, c=24.898(5) Å, β=93.67(3)°, V=2344.0(8) Å³, Z=4 for 1; space group P4₂/n, a=7.775(1) Å, c=13.698(3) Å, V=828.1(2) Å³, Z=2 for 2]. The crystal structure of 1 is related to a group of compounds formed by Cu²⁺-(XO₄)³⁻ layers (X=P⁵⁺, As⁵⁺) linked by M cations (M=alkali, alkaline earth, Pb²⁺, or Ag⁺) and partly by hydrogen bonds. In 1, worth mentioning is the very short hydrogen bond length, D···A=2.477(3) Å. It is one of the examples of extremely short hydrogen bonds, where the donor and acceptor are crystallographically different. Compound 2 represents a layered structure consisting of Cu₂O₈ centrosymmetric dimers crosslinked by As1φ₄ tetrahedra, where φ is O or OH, which are interconnected by Ba, As2 and hydrogen bonds to form a three-dimensional network. The layers are formed by Cu₂O₈ centrosymmetric dimers of CuO₅ edge-sharing polyhedra, crosslinked by As1O₄ tetrahedra. Vibrational spectra (FTIR and Raman) of both compounds are described. The spectroscopic manifestation of the very short hydrogen bond in 1, and ABC-like spectra in 2 were discussed.     

Non-centrosymmetric Ba3Ti3O6(BO3)2

The compound previously reported as Ba₂Ti₂B₂O₉ has been reformulated as Ba₃Ti₃B₂O₁₂, or Ba₃Ti₃O₆(BO₃)₂, a new barium titanium oxoborate. Small single crystals have been recovered from a melt with a composition of BaTiO₃:BaTiB₂O₆ (molar ratio) cooled between 1100°C and 850°C. The crystal structure has been determined by X-ray diffraction: hexagonal system, non-centrosymmetric space group, a=8.7377(11) Å, c=3.9147(8) Å, Z=1, wR(F²)=0.039 for 504 unique reflections. Ba₃Ti₃O₆(BO₃)₂ is isostructural with K₃Ta₃O₆(BO₃)₂. Preliminary measurements of nonlinear optical properties on microcrystalline samples show that the second harmonic generation efficiency of Ba₃Ti₃O₆(BO₃)₂ is equal to 95% of that of LiNbO₃.     

The Phase Relations in the System In2O3–TiO2–MgO at 1100 and 1350°C

The phase relations in the system In₂O₃–TiO₂–MgO at 1100 and 1350°C are determined by a classical quenching method. In this system, there are four pseudobinary compounds, In₂TiO₅, MgTi₂O₅ (pseudobrookite type), MgTiO₃ (ilmenite type), and Mg₂TiO₄ (spinel type) at 1100°C. At 1350°C, in addition to these compounds there exist a spinel-type solid solution Mg_2−xIn_2xTi_1−xO₄ (0≤x≤1) and a compound In₆Ti₆MgO₂₂ with lattice constants a=5.9236(7) Å, b=3.3862(4) Å, c=6.3609(7) Å, β=108.15(1)°, and q=0.369, which is isostructural with the monoclinic In₃Ti₂FeO₁₀ in the system In₂O₃–TiO₂–MgO. The relation between the lattice constants of the spinel phase and the composition nearly satisfies Vegard's law. In₆Ti₆MgO₂₂ extends a solid solution range to In₂₀Ti₁₇Mg₃O₆₇ with lattice constants of a=5.9230(5) Å, b=3.3823(3) Å, c=6.3698(6) Å, β=108.10(5)°, and q=0.360. The distributions of constituent cations in the solid solutions are discussed in terms of their ionic radius and site preference effect.     

三维有序大孔复合材料Bi2O3/TiO2制备与多模式下光催化降解结晶紫

以TiO2为基体,在聚苯乙烯(PS)胶球和EO20PO70EO20(P123)两种模板剂作用下通过溶胶-凝胶及煅烧后处理方法制备了三维有序大孔纳米复合材料Bi2O3/TiO2.经傅里叶变换红外(FT-IR)光谱、X-射线衍射(XRD)、等离子体原子发射光谱(ICP-AES)、紫外-可见漫反射吸收光谱(UV-Vis DRS)、X-射线光电子能谱(XPS)、扫描电子显微镜(SEM)和N2吸附-脱附等物理测试手段对其组成、结构、形貌及表面物理化学性能进行了表征.结果表明,该复合材料晶型结构良好,孔结构排列整齐有序,孔壁呈介孔结构,属于三维有序大孔材料(3DOM).与TiO2相比,3DOM-Bi2O3/TiO2对光的吸收至少红移60 nm,且红移至可见区.在紫外光、可见光以及微波辅助等多模式光催化降解结晶紫的实验中,复合材料3DOM-Bi2O3/TiO2表现出良好的光催化活性,其活性明显高于P25、Bi2O3和Bi2O3/TiO2.同时,该复合材料针对不同类型的染料均表现出较好的紫外光降解效果,且3次循环实验后,依旧保持较高活性.     

螺桨烷型分子BX[(CH_2)_n]_3和BX(CH_2)[CH(CH_2)_nCH](X=N,P)的结构和性质

采用密度泛函理论(DFT)研究了螺桨烷型分子BX[(CH2)n]3和BX(CH2)[CH(CH2)n CH](X=N,P;n=1-6)的结构、稳定性、化学键和电子光谱性质.计算结果表明这些分子都是稳定的.BX[(CH2)n]3(X=N,P;n=1-6)的最高占据分子轨道(HOMO)和最低空分子轨道(LUMO)之间的能隙均大于5.20 eV,其中BN[CH2]3和BP[CH2]3的能隙超过7.0 eV,与C5H6的能隙(7.27 eV)很接近,BX(CH2)[CH(CH2)n CH](X=N,P;n=1-6)的能隙在6.80 eV左右.所研究分子能量的二阶差分表明BN[(CH2)3]3、BP[(CH2)4]3及BX(CH2)[CH(CH2)2CH](X=N,P)是最稳定的.BX[(CH2)n]3的Wiberg键级表明除了BN[(CH2)n]3(n=2和6)中不存在B―N键,其它化合物中B和N均形成了化学键,BP[(CH2)n]3中除了BP[(CH2)2]3不存在B―P键,其它的均存在.电子密度的拓扑分析表明N―B键属于离子键,而P―B键具有共价键特征.BX[(CH2)n]3(X=N,P)的第一垂直激发能分别在191.1-284.8 nm和191.8-270.1 nm之间,BX(CH2)[CH(CH2)n CH](X=N,P)的第一垂直激发能分别在190.5-199.7 nm和209.0-221.3 nm之间.     

浸渍-分解法制备高可见光催化活性的Bi2O3/TiO2纳米管阵列

用浸渍-分解法将Bi₂O₃纳米颗粒沉积在TiO₂纳米管壁上, 制备了Bi₂O₃/TiO₂纳米管阵列. 用电感耦合等离子体发射光谱(ICP-AES)测定了Bi₂O₃/TiO₂ 纳米管阵列的化学组分, 利用X 射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)和紫外-可见(UV-Vis)吸收光谱表征了所制备的样品. 通过在可见光下(λ>400 nm)降解甲基橙(MO)水溶液来评价样品的光催化活性. 结果表明, Bi₂O₃纳米颗粒均匀地沉积在TiO₂纳米管中. Bi₂O₃/TiO₂纳米管阵列具有比纯Bi₂O₃膜和N-TiO₂纳米管阵列高得多的可见光催化活性. Bi₂O₃/TiO₂纳米管阵列活性的增强是其强可见光吸收和Bi₂O₃与TiO₂之间形成的异质结的协同作用的结果.     

High-pressure synthesis and structural characterization of three new polyphosphides, α-SrP3, BaP8, and LaP5

Three novel metal polyphosphides, α-SrP₃, BaP₈, and LaP₅, were prepared in BN crucibles by the reaction of the respective stoichiometric mixtures under a high pressure of 3 GPa at 950-1000°C. Their crystal structures were determined from single-crystal X-ray data (α-SrP₃: space group C2/m, a=9.199(6) Å, b=7.288(3) Å, c=5.690(3) Å, β=113.45(4)°, Z=4, R₁/wR₂=0.0684/0.1180 for 471 observed reflections and 22 variables; BaP₈: space group P−1, a=6.762(2) Å, b=7.233(2) Å, c=8.567(2) Å, α=86.32(2)°, β=84.31(2)°, γ=70.40(2)°, Z=2, R₁/wR₂=0.0476/0.1255 for 2702 observed reflections and 82 variables; LaP₅: space group P2₁/m, a=4.885(1) Å, b=9.673(3) Å, c=5.577(2) Å, β=105.32(2)°, Z=2, R₁/wR₂=0.0391/0.1034 for 1272 observed reflections and 31 variables). α-SrP₃ is isostructural with SrAs₃ and the crystal structure consists of two-dimensional puckered polyanionic layers _∞²[P₃]²⁻ that stack along the c-axis yielding channels occupied by Sr²⁺ counterions. BaP₈ crystallizes in a new structure type which contains a three-dimensional infinite polyanionic framework _∞³[P₃]²⁻, with large channels hosting the barium cations. LaP₅ is a layered compound containing _∞²[P₅]³⁻ polyanionic layers separated by La³⁺ ions. All three compounds exhibit expected diamagnetic behaviors.     

Phase relations, crystal chemistry, and dielectric properties in sections of the La2O3-CaO-MgO-TiO2 system

Subsolidus phase equilibria and crystal chemistry were studied for the La₂O₃-MgO-TiO₂ system and for the ternary sections LaMg_1/2Ti_1/2O₃-CaTiO₃-La₂O₃ and LaMg_1/2Ti_1/2O₃-CaTiO₃-La_0.833Mg_0.25Ti_0.75O₃ in the quaternary La₂O₃-CaO-MgO-TiO₂ system. Dielectric properties (relative permittivity and temperature coefficient of resonant frequency, τ_f) were measured at 5-10 GHz and mapped onto the phase equilibria relations to reveal the compositions of temperature-stable (τ_f=0) compounds and mixtures. Phase equilibria relations were obtained by X-ray powder diffraction analysis of approximately 80 specimens prepared by solid-state reactions in air at ∼1450°C. Six ternary phases were found to form in the La₂O₃-MgO-TiO₂ system, including the three previously reported compounds LaMg_1/2Ti_1/2O₃, La₅Mg_0.5Ti_3.5O₁₅, and “La₆MgTi₄O₁₈”; and the new phases La₁₀MgTi₉O₃₄, La₉Mg_0.5Ti_8.5O₃₁, and a perovskite-type solid solution (1−x)LaMg_1/2Ti_1/2O₃-xLa_2/3TiO₃ (0?x?0.5). The phase previously reported as “La₆MgTi₄O₁₈” was found to form off-composition, apparently as a point compound, at La₆Mg_0.913Ti_4.04O₁₈. Indexed experimental X-ray powder diffraction patterns are given for LaMg_1/2Ti_1/2O₃, La₅Mg_0.5Ti_3.5O₁₅, La₆Mg_0.913Ti_4.04O₁₈, La₁₀MgTi₉O₃₄, and La₉Mg_0.5Ti_8.5O₃₁. LaMg_1/2Ti_1/2O₃ exhibits a slightly distorted perovskite structure with ordered B-cations (P2₁/n; a=5.5608(2) Å, b=5.5749(3) Å, c=7.8610(5) Å, β=90.034(4)°). La₅Mg_0.5Ti_3.5O₁₅ (Pm1; a=5.5639(1), c=10.9928(5) Å) and La₆Mg_0.913Ti_4.04O₁₈ (R3m; a=5.5665(1), c=39.7354(9) Å) are n=5 and n=6 members, respectively, of the (111) perovskite-slab series A_nB_n−1O_3n. The new phases La₁₀MgTi₉O₃₄ (a=5.5411(2), b=31.3039(9), c=3.9167(1) Å) and La₉Mg_0.5Ti_8.5O₃₁ (a=5.5431(2), b=57.055(1), c=3.9123(1) Å) are n=5 and n=4.5 members, respectively, of the (110) perovskite-slab series A_nB_nO_3n+2, which exhibit orthorhombic subcells; electron diffraction revealed monoclinic superlattices with doubled c-parameters for both compounds. Extensive perovskite-type solid solutions form in the ternary sections LaMg_1/2Ti_1/2O₃-CaTiO₃-La₂O₃ and LaMg_1/2Ti_1/2O₃-CaTiO₃-La_0.833Mg_0.25Ti_0.75O₃. The La₂O₃-MgO-TiO₂ system contains two regions of temperature-stable (τ_f=0) compositions. The quaternary La₂O₃-CaO-MgO-TiO₂ system contains an extensive single-phase perovskite-type volume through which passes a surface of temperature-stable compositions with permittivities projected to be in the 40-50 range. Traces of this surface occur as lines of τ_f=0 perovskite-type phases in the ternary sections LaMg_1/2Ti_1/2O₃-CaTiO₃-La₂O₃ and LaMg_1/2Ti_1/2O₃-CaTiO₃-La_0.833Mg_0.25Ti_0.75O₃.     

Isomorphism of bis(diethyldithiocarbamato)zinc(II) adduct with pyridine, [Zn(Py)(EDtc)2]: hysteresis in the reaction of the adduct formation

The structure of the polycrystalline adduct bis(diethyldithiocarbamato)-pyridine zinc(II) depends on the pathway of physico-chemical conditions during the preparation procedure, as was revealed by solid state ¹⁵N CP/MAS spectroscopy in good correlation with known single crystal X-ray diffraction structures of this adduct. Two isomorphs of the adduct, namely α-[Zn(Py)(S₂CNEt₂)₂] and β-[Zn(Py)(S₂CNEt₂)₂], are the two molecules in the asymmetric unit of a single crystal (or polycrystalline) sample that can be obtained by recrystallization from toluene of the equimolar solution of the initial diethyldithiocarbamate zinc(II) complex and pyridine. The third isomorph, γ-[Zn(Py)(S₂CNEt₂)₂], can be obtained by recrystallization from pure pyridine of the diethyldithiocarbamate zinc(II) complex, or by its equimolar absorption of pyridine, or by desorption of pyridine from the clathrated adduct, [Zn(Py)(S₂CNEt₂)₂]·Py. Finally, the γ-[Zn(Py)(S₂CNEt₂)₂] isomorph recrystallizes from the melt into α/β-isomorphs of the adduct.     

Molecular structure of nickel(II) and copper(II) N,N′-ethylene-bis(acetylacetoneiminates) MO2N2C12H18 according to gas-phase electron diffraction data and quantum-chemical calculations

The molecular structure of nickel(II) and copper(II) N,N′-ethylene-bis(acetylacetoneiminates), NiO₂N₂C₁₂H₁₈ and CuO₂N₂C₁₂H₁₈, at 442(5) K and 425(5)K, respectively. Both molecules have C ₂ symmetry with a nearly planar MN₂O₂ coordination site and internuclear distances r _h1(M-O) = 1.862(10)/1.923(17) Å and r _h1(M-N) = 1.879(10)/1.947(18) Å for Ni(acacen) and Cu(acacen), respectively. The structure of free molecules is close to the structure of molecules in crystal. The DFT/3LYP quantum-chemical calculations (CEP-31G and 6-31G* basis sets) gave a molecular structure that agreed satisfactorily with the one found in experiment. The low-spin ¹ A and high-spin ³ A states of the Ni(acacen) molecule were considered. It was found that a change in multiplicity caused significant changes in the geometrical and electronic structure of the MN₂O₂ coordination site. As shown by experiment and calculations for the NiO₂N₂C₁₂H₁₈ molecule, the low-spin ¹ A state is the ground state. The internal rotation of CH₃(CN) and CH₃(CO) methyl groups was studied by the 3LYP/CEP-31G method. It was shown that steric hindrances led to a high rotation barrier of the CH₃(CN) group.     

Hydrolysis-Polycondensation in Binary Phosphorus Alkoxides—TEOS System Studied by GC-MS

It is well known that various phosphorus precursors exhibit different reactivities towards hydrolysis-polycondensation in acidic media. The hydrolysis-condensation in binary P-alkoxides—TEOS system was studied by GC-MS, in relation to the mentioned reactivity. As P-precursors, the following reagents were used: PO(OMe)₃, PO(OEt)₃, PO(OBu)₃, P(OEt)₃ and HOP(OMe)₂. PO(OMe)₃, PO(OEt)₃ and PO(OBu)₃ do not hydrolyze, but change the TEOS hydrolysis-polycondensation ratio. P(OEt)₃ partially hydrolyzes and transforms into a very stable HOP(OEt)₂ form, while HOP(OMe)₂ reacts very fast with nonparental solvent and undergoes transesterification. Si–O–P bonds have not been observed in early stages of hydrolysis-polycondensation. However, the gelling tendency is strongly influenced by the P-precursor.