Photochromism of diarylethene derivatives having an indene unit

Photochromic indene derivatives, 1-(2-methyl-1-inden-3-yl)-2-(2-methyl-1-benzothien-3-yl)perfluorocyclopentene and 1-(2-methyl-1-inden-3-yl)-2-(2-methyl-1-benzofuran-3-yl)perfluorocyclopentene, were synthesized and their photochromic performance was examined.     

Photoswitching of an alcohol-sensitive photochromic diarylethene

The closed-ring isomer of diarylethene 1a, 1-(2-methyl-5-(4-N,N-diethylaminophenyl)thien-3-yl)-2-(2-methyl-5-phenylthien-3-yl)perfluorocyclopentene was found to cause the substitution reaction with primary alcohols at room temperature. The open-ring isomer 1a was stable in the alcohols. The product obtained in methanol was isolated by HPLC, and the structure was identified by ¹H NMR, mass spectrometry, and X-ray crystallographic analysis. It was revealed that two fluorine atoms were replaced with methoxy groups. The substitution reaction was also caused with ethylene glycol to form the five-membered ring. Both the products also showed photochromism, and had absorption maxima and photocycloreversion quantum yields different from those of 1a.     

Selective photoswitching of a dyad with diarylethene and spiropyran units

A dyad bearing diarylethene and spiropyran units were synthesized. Ultraviolet light, visible light, H⁺, and Fe³⁺ inputs induce the multiple interconversion among the colorless diarylethene with spiropyran form (3), the colored closed form of diarylethene with spiropyran form (4), ME (5), MEH (6, 7) and MEH·Fe³⁺ (8). The efficient energy transfer from the anthracene emission to MEH·Fe³⁺ or ME·Fe³⁺ form was achieved. Using multi-mode photo switching in a dyad 3, logic gates may be built.     

Synthesis and photochromic reactivity of diarylethene trimers bridged by ethenyl and ethynyl unit

Two diarylethene trimers bridged by ethenyl and ethynyl groups were synthesized and their photochromic behaviors were examined. Upon irradiation of the trimers 2 and 4 with UV light, one-three photoinduced cyclization reactions occur. Each isomer was isolated and analyzed by ¹H NMR spectrum. The quantum yield of 2 and 4 is 0.52 and 0.311, respectively.     

Synthesis of photochromic diarylethene polymers for a write-by-light/erase-by-heat recording system

A functionalized styrene monomer (1a) having a photochromic diarylethene chromophore with functional properties of photocoloration, photostability of the colored state, and thermal erasion by heating was synthesized, and the polymer and copolymers of 1a were prepared by radical polymerization and copolymerization. Their polymers exhibited excellent photocoloration and rapid thermal bleaching above 150 °C in solution and in the solid state as well as the performance of the monomeric diarylethene chromophore. In addition, the colored state has a high photostability under visible room light. The diarylethene homopolymer had a glass transition temperature (T_g) as high as polystyrene. The copolymer of 1a with N-1-adamantylmaleimide exhibited extremely high T_g above 200 °C with keeping the photofunctional performance. Such photochromic polymer and copolymers with high T_g can be potentially applied to rewritable display materials and image recordings by a write-by-light/erase-by-heat system.     

Synthesis and the effect of alkyl chain length on optoelectronic properties of diarylethene derivatives

Photochromic symmetrical diarylethene derivatives 1a-6a bearing different long alkyl chains at 2-position of thiophene rings have been synthesized and their structures have been determined by single-crystal X-ray diffraction analysis. The effect of alkyl chain length on their optoelectronic properties, such as photochromism in solution as well as in the crystalline phase and electrochemical performance was investigated in detail. These diarylethenes have showed good photochromic behavior both in solution and in the single crystalline phase. Introduction of the long alkyl chains at 2-position of bis(5-formyl-3-thienyl)perfluorocyclopentene increased the absorption coefficients of both open- and closed-ring isomers and induced bathochromic shifts of the maximal wavelength absorption of the closed-ring isomers. The long alkyl chains can also decrease the cyclization/cycloreversion quantum yields and the oxidation potentials. The cyclic voltammetry indicated that the band gap of these diarylethene derivatives was significantly affected by the alkyl chain length.     

A proton and optic dual-control molecular switch based on photochromic diarylethene bearing a rhodamine unit

A novel fluorescent switch based on rhodamine B and photochromic diarylethene, 1-[2-methyl-5-(4-methoxylphenyl)-3-thienyl]-2-[2-methyl-5-(4-rhodamine B hydrazine-Schiff base-phenyl)-3-thienyl]perfluorocyclopentene (1), has been successfully synthesized through the condensation of rhodamine B hydrazine and 1-[2-methyl-5-(4-methoxylphenyl)-3-thienyl]-2-[2-methyl-5-(4-formylphenyl)-3-thienyl]perfluorocyclopentene. UV and FL measurements reveal that the compound exhibits good photochromic properties responsive to proton and optic dual inputs. Upon irradiation with 297 nm light, the colorless solution of compound 1 turns blue, while the blue solution becomes colorless after irradiated with visible light (λ>450 nm). Furthermore, upon an addition of H⁺, the fluorescence resonance energy transfers from the rhodamine unit (FRET donor) to the closed-ring diarylethene unit (FRET acceptor), although no energy transfer occurs when the diarylethene is in the open-ring form. The emission intensity of the rhodamine can be modulated with proton and UV/vis light and molecular-level signal communication has been constructed, indicating high potentials of the compound in molecular switches or naked eye recognition systems.     

The effects of phenyl-bridged glucosyltriazolyl groups on the properties of water-soluble diarylethene derivatives

Three water-soluble diarylethenes with glycosyltriazolyl groups and variable phenyl units have been synthesized, and their properties, such as water solubility, photochromism, and fluorescence have been discussed. Upon alternating irradiation with UV and visible light, each of the diarylethenes exhibited favorable photochromism and functioned as fluorescent switches in water. Experimental results showed that their water solubility as well as absorption features, cyclization quantum yields, photoconversion ratios, thermal stability, and fatigue resistance exhibited a strong correlation with the number of phenyl-bridged glucosyltriazolyl groups in diarylethene systems. The absorption maximum, thermal stability, and fatigue resistance were significantly improved, but the water solubility and fluorescent modulation efficiency were suppressed with the increase of the number of phenyl-bridged glucosyltriazolyl groups for these diarylethene derivatives.     

Synthesis, crystal structure and optoelectronic properties of a new unsymmetrical photochromic diarylethene

A new unsymmetrical photochromic diarylethene, 1-(2-methyl-5-phenyl-3-thienyl)-2-[2-methyl-5-(3-trifluoromethylphenyl)-3-thienyl]perfluorocyclopentene (1a), was synthesized and its structure was determined by single-crystal X-ray diffraction analysis. Its optical and electrochemical properties, including photochromic reactivity both in solution and in the solid state (PMMA film and the single-crystalline phase), fluorescence and electrochemical properties were investigated in detail. The compound showed excellent photochromism even in the single-crystalline phase by photo-irradiation. In acetonitrile, the open-ring isomer of diarylethene 1 exhibited relatively strong fluorescence at 470nm when excited at 300nm, and its emission intensity decreased along with the photochromism upon irradiation with 313nm light. Its closed-ring isomer showed almost no fluorescence. The electrochemical properties of diarylethene were investigated by performing cyclic voltammetry experiment and its HOMO and LUMO energy level were calculated.     

液相放电法合成氮化碳晶体

自从 Cohen等 [1,2 ] 预言了一种碳氮化合物 ( β- C3N4 )可能具有比金刚石还高的硬度和其它优异的力学、电学和光学性能以来 ,人们竟相采用各种技术手段 (如化学气相沉积、磁控溅射、离子束沉积和激光刻蚀等 )尝试合成这种新材料 [3,4 ] .但是 ,大多数合成的氮化碳材料为非晶或者是少量的晶体包埋在非晶的碳和 CNx 材料中 ,尚未制得可以精确地研究其晶体结构的足够大的单晶 .1 999年 ,Fu等 [5] 将液相电沉积技术应用于氮化碳材料的合成 ,从乙腈中沉积了氮含量为 2 5 %的氮化碳薄膜 .目前电化学沉积法制备的氮化碳薄膜多为非晶膜 [6～ 9]…     

XRD and AFM studies of ZnS thin films produced by electrodeposition method

The structure and morphology of ZnS thin films were investigated. ZnS thin films have been grown on an indium tin oxide glass substrate by electrodeposition method using zinc chloride and sodium thiosulfate solutions at room temperature. The X-ray diffraction patterns confirm the presence of ZnS thin films. From the AFM images, grain size decreases as the cathodic potential becomes more negative (from ?1.1 to ?1.3 V) at various deposition periods. Comparison between all the samples reveals that the intensity of the peaks increased, indicating better crystalline phase for the films deposited at ?1.1 V. These films show homogeneous and uniform distribution according to AFM images. On the other hand, XRD analysis shows that the number of ZnS peaks increased as deposition time was increased from 15 to 30 min at ?1.1 V. The AFM images show thicker films to be formed at ?1.1 V indicating more favourable condition for the formation of ZnS thin films.     

Photochromism of diarylethene: Effect of polymer environment and effects on surfaces

A diarylethene (DAE) study using thermodynamical physical chemistry, elemental fractal analysis, and quantum chemistry is presented. Attention is focused on the ways the polymer environment affects DAE photochromism and on the ways that DAE photochromism affects surfaces. Non-constant quantum yields in single-molecule measurements, selective metal deposition, and a super-water-repellent fractal surface are discussed after a short summary of the latest experimental results concerning photochromism in DAE molecules.     

Synthesis and the effect of alkyl chain length on photochromic properties of diarylethene derivatives

A new class of photochromic diarylethenes bearing pyrrole and thiophene units with different length of alkyl chains at 2-position of thiophene rings have been synthesized. Their characteristics, including photochromism and fatigue resistance were investigated systematically, and each diarylethene derivative showed good photochromic properties whether in solution or in PMMA films. The alkyl group moiety was connected directly to the central cyclopentene ring as a heteroaryl unit and availably participated in photoisomerization reaction. And some properties, for example, the conversion ratio in the photostationary state(PSS) and the absorption coefficient of the ring-closed isomers in acetonitrile were significantly affected by the alkyl chain length. The results revealed that substituents of alkyl chain played an important role in the photoisomerization process of diarylethenes.     

Photochromism of diarylethene derivatives having cyclohexyl and cyclohexenyl groups in single-component crystals and a two-component mixed crystal

Diarylethene derivatives 1a having two cyclohexyl groups and 2a having a cyclohexyl and a cyclohexenyl group formed a mixed crystal composed of almost equal amounts of the two components, and underwent photochromism in the mixed crystal as well as in the single-component crystals.     

Photochromism of new 3,5-position hybrid diarylethene derivatives bearing both thiophene and thiazole moieties

Five new diarylethenes based on a hybrid structure of bis(5-thiazolyl)ethene and bis(3-thienyl)ethene were synthesized, and the structures of the four compounds were determined by single-crystal X-ray diffraction analysis. The properties of these diarylethenes, such as photochromism, fluorescence, and electrochemical properties were investigated in detail. All of these compounds showed good photochromism and fluorescence both in solution and in PMMA films. The electron-donating substituents could effectively increase the cyclization and cycloreversion quantum yields, and the fluorescence emission peaks, whereas the electron-withdrawing groups functionalized an inverse action for these diarylethene derivatives. Cyclic voltammetry revealed that great differences existed amongst the electrochemical behaviors of these compounds. The oxidation potentials and the band gaps of these diarylethenes increased remarkably with the increase in electron-withdrawing ability. All results suggested that the effects of substitution have a significant effect on the photochemical and electrochemical behaviors of these diarylethene derivatives.     

Facile Fabrication and Optical Properties of Nanostructural PbSe Films

PbSe films with different nanostructures, such as nanoparticles, nanohollows and hierarchical structures, can be synthesized by adjusting the current density and the reaction temperature via a convenient and efficient electrochemical route in the absence of hard template and surfactant. The calculated band gaps of the prepared PbSe nanoparticles and nanohollows were about 0.32 and 0.43 eV, respectively. This suggests that quantum size effect in nanohollows greatly influences their band gap. This preparation method possesses remarkable advantages, such as low cost, high efficiency and easy preparation, which are very suitable for preparing nanomaterials.     

A fluorescent sensor for Al3+ based on a photochromic diarylethene with a hydrazinobenzothiazole Schiff base unit

A new fluorescent turn-on chemosensor for Al³⁺ based on a diarylethene unit was designed and synthesized. Photochromism, fluorescence switch, and metal ion recognition behaviors of this diarylethene derivative were investigated by absorption and fluorescence emission spectra. It shows an outstanding fluorometric sensing ability toward Al³⁺ ion, and the detection limit was measured to be 9.3 × 10^?8 mol L^?1 via fluorescence methods. Based on these interesting properties, a combinational logic circuit was constructed successfully.     

A new fluorescence probe based on diarylethene with a benzothiazine unit for selective detection of Cd2+

A novel photochromic diarylethene derivative containing a benzothiazine unit has been synthesized. Its photochromism and fluorescent selectivity to metal ions were studied in detail in methanol solution. Under the stimulation of Cd²⁺ ions, the derivative showed a significant fluorescence enhancement and obvious red shift, accompanied by the fluorescent color changed from dark purple to bright blue. The 1: 1 stoichiometry between the derivative and Cd²⁺ was verified by titration experiments and high resolution mass spectrometry. In addition, a molecular logic circuit was designed with the emission intensity at 476?nm as output and the stimuli of Cd²⁺/EDTA and UV/vis as inputs.     

Photochromism of diarylethene derivatives bearing a benzo[b]silole unit

Photochromic benzo[b]silole derivatives, 1-(1,1-dimethyl-2-phenylbenzo[b]silol-3-yl)-2-(2-phenylbenzo[b]thien-3-yl)perfluorocyclopentene and 1-(1,1-dimethyl-2-phenylbenzo[b]silol-3-yl)-2-(2-phenyl-1-benzofuran-3-yl)perfluorocyclopentene, were synthesized and their photochromic performance was examined in solution.     

A bifunctional probe for Al3+ and Zn2+ based on diarylethene with an ethylimidazo[2,1-b]thiazole-6-hydrazide unit

A new diarylethene with ethylimidazo[2,1-b]thiazole-6-hydrazide unit was synthesized, and its photochromic and fluorescent behaviors have been systematically investigated by the stimulation of lights and metal ions in methanol. This new diarylethene exhibited high selectivity and sensitivity toward Al³⁺ and Zn²⁺. The addition of Al³⁺ and Zn²⁺ displayed excellent colorimetric response behaviour with the concomitant color change from colorless to yellow, which could be easily observed by the naked eye. Upon addition of Al³⁺, the fluorescence intensity was enhanced by 180–fold and the emission peak of 1O–Al³⁺ blue-shifted by 15?nm accompanied with a color change from colorless to bright blue. In contrast, when stimulated with Zn²⁺, its fluorescence intensity was enhanced by 35–fold and the emission peak of 1O–Zn²⁺ red-shifted by 16?nm with an evident color change from black to bright green. The LOD for Al³⁺ and Zn²⁺ were determined to be 2.97?×?10^?9?mol?L^?1 and 5.98?×?10^?9?mol?L^?1, respectively. Moreover, a logic circuit was constructed with the fluorescence intensity as the output signal responding to the light and chemical species as the inputs.