水滑石类催化剂催化制氢及生物炼制(英文)

近年来,水滑石由于其独特的性质受到越来越多的关注.作为非均相固体催化剂,水滑石及其衍生物具有优良的催化性能,因此得到了广泛研究和应用.本文简述了水滑石的几种合成方法,重点介绍了水滑石类催化剂在催化制氢和生物炼制方面的应用,并预测了水滑石类材料在新材料合成及环境友好催化体系中的应用前景.     

Recent advances of layered double hydroxides–based bifunctional electrocatalysts for ORR and OER

The oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) have attracted increasing attention for the sake of clean, renewable, and efficient energy technologies in recent years. The design of ORR/OER bifunctional electrocatalysts is a challenging task in the promotion of highly efficient rechargeable metal-air batteries as well as regenerative fuel cells. Owing to the wide adaptability of different types and ratios of metals in the interlayer space as well as the adjustable interlayer distance, composite materials with layered double hydroxides (LDHs) and their derivatives have recently been registered as electrode materials and catalysts supports for various electrochemical reactions. This study examines the recent development of bifunctional electrocatalysts based on LDHs for ORR/OER to expand the application of LDHs in the field of energy storage and conversion. Various bifunctional electrocatalysts associated with LDHs are discussed in detail to improve their performance. Finally, existing problems and future prospects for improving the performance of LDHs bifunctional electrocatalysts are proposed.     

Structural characterization and thermal decomposition of layered double hydroxide/poly(p-dioxanone) nanocomposites

Nanocomposites based on layered double hydroxides (LDH) and poly(p-dioxanone) (PPDO) were prepared by melt processing using dodecylbenzene sulfonate (DBS) and 4-hydroxybenzene sulfonate (HBS) as organic modifiers. The incorporation of organic anions in LDH was demonstrated by wide-angle X-ray scattering (WAXS) and Fourier transform infrared (FTIR). The dispersion degree of the organically modified LDHs in the PPDO matrix was analyzed by WAXS, indicating that only the LDH modified with HBS was exfoliated. The effect of the organically modified LDHs on the thermal stability of PPDO was studied using thermogravimetric analysis (TGA). The thermal stability of PPDO matrix was enhanced by the incorporation of the LDH modified with HBS due to the shielding effect of the exfoliated layers. In contrast, the LDH modified with DBS produced a decrease of the thermal stability of PPDO, probably due to hydrolytic decomposition of ester group. The thermogravimetric analysis also showed that the organo-modified LDH did not modify the thermal decomposition mechanism of the polymer, but had an effect on the thermal stability.     

The role of the trivalent metal in an LDH: Synthesis, characterization and fire properties of thermally stable PMMA/LDH systems

Two layered double hydroxides (LDHs), calcium aluminum undecenoate (Ca₃Al) and calcium iron undecenoate (Ca₃Fe), have been prepared by the co-precipitation method. XRD analysis of these LDHs reveals that they are layered materials and FT-IR and TGA confirmed the presence of the undecenoate anions in the material produced. The PMMA composites were prepared by bulk polymerization and the samples were characterized by XRD, TEM, TGA and cone calorimetry. Both additives greatly enhance the thermal stability of PMMA, while the calcium aluminum LDH gives better results when the fire properties were examined using the cone calorimeter.     

Hybrid and biohybrid layered double hydroxides for electrochemical analysis

Layered double hydroxides (LDH) are lamellar materials that have been extensively used as electrode modifiers. Nanostructured organic–inorganic materials can be designed by intercalation of organic or metallic complexes within the interlayer space of these materials or by the formation of composite materials based on biopolymers (alginate or chitosan) or biomolecules, such as enzymes. These hybrid or biohybrid materials have interesting properties applicable in electroanalytical devices. From an exhaustive review of the literature, the relevance of these hybrid and biohybrid LDH materials as electrode materials for electrochemical detection of species with an environmental or health impact is evaluated. The analytical characteristics (sensitivity and detection limit) of LDH-based amperometric sensors or biosensors are scrutinized.

Layered Double Hydroxides as Catalytic Materials: Recent Development

This report surveys the recent development of layered double hydroxides (LDHs) as catalytic materials, which have attracted considerable attention in the past decade. A major challenge in the rapidly growing field is to improve the functionalities of these materials. Therefore, this article is mainly focused on the lately reported design and synthesis strategies for LDH materials and their catalytic applications as actual catalysts, catalyst precursors and catalyst supports.     

Preparation and Characterization of Cu(II) Phthalocyanine Tetrasulfonate Intercalated and Supported on Layered Double Hydroxides

The aim of the present work was to synthesize and characterize layered doublehydroxides (LDHs), in the magnesium/aluminum form, intercalated with copper(II)phthalocyanine tetrasulfonate (CuPcTs). The metal complex was immobilized intothe LDH gallery region through the reconstitution method and this material wascharacterized by X-ray diffraction (XRD), surface area and porosity measurements,elementary analysis, thermogravimetry (TGA), vibrational (IR) and electronic(UV-visible) spectroscopies, and electronic paramagnetic resonance (EPR). Thecatalytic performance of CuPcTs intercalated and supported on the LDH wasevaluated by carrying out the hydrogen peroxide dismutation. The CuPcTs wassuccessfully intercalated into the LDH layers according to XRD data (the basalspacing of the carbonate precursors increases by approximately 15Å inthe intercalated samples). The surface area and porosity analysis suggested thatthe CuPcTs intercalated materials are not microporous solids. Samples containingthe metal complex confined between the LDH layers have an appreciable thermalstability: decomposition is not observed at least up to 400 °C. TGA experiments also show that the weight-loss curves of the CuPcTs supported samples superimpose those recorded for the CuPcTs complex and the LDH-carbonate while the curves for theintercalated materials are unique. CuPcTs intercalated or supported on LDHs is notactive in the hydrogen peroxide dismutation although the free form shows activity at pH above 8.     

Enzyme inhibition-based biosensor for the electrochemical detection of microcystins in natural blooms of cyanobacteria

An electrochemical biosensor for the detection of microcystin has been developed based on the inhibition of the protein phosphatase 2A (PP2A) by this cyanobacterial toxin. The enzyme has been immobilised by entrapment using a poly(vinyl alcohol) azide-unit pendant water-soluble photopolymer (PVA-AWP). Electrode supports and immobilisation conditions have been optimised by colorimetric assays, the highest immobilisation yields being obtained with screen-printed graphite electrodes and the 1:2 PP2A:PVA ratio. Catechyl monophosphate (CMP), α-naphthyl phosphate (α-NP) and 4-methylumbelliferyl phosphate (4-MUP) have been used as phosphorylated substrates to monitor the protein phosphatase activity by electrochemical methods, the former providing the highest chronoamperometric currents at appropriate working potentials (+450 mV versus Ag/AgCl). Incubation with standard microcystin solutions has demonstrated the inhibition of the immobilised enzyme, proportional to the toxin concentration. The standard inhibition curve has provided a 50% inhibition coefficient (IC₅₀) of 83 μg L⁻¹, a limit of detection (LOD; 35% inhibition) of 37 μg L⁻¹, and 100% inhibition at about 1000 μg L⁻¹. Real samples of cyanobacterial blooms from the Tarn River (Midi-Pyrénées, France) have been analysed using the developed amperometric biosensor and the toxin contents have been compared to those obtained by a conventional colorimetric protein phosphatase inhibition (PPI) assay and high-performance liquid chromatography (HPLC). The results clearly justify the use of the developed amperometric biosensor as screening method for microcystin detection.     

Recent progress in functionalized layered double hydroxides and their application in efficient electrocatalytic water oxidation

Layered double hydroxides(LDHs), a class of anionic clays consisting of brucite-like host layers and interlayer anions, have been widely investigated in the last decade due to their promising applications in many areas such as catalysis, ion separation and adsorption. Owing to the highly tunable composition and uniform distribution of metal cations in the brucite-like layers, as well as the facile exchangeability of intercalated anions, LDHs can be modified and functionalized to form various nanostructures/composites through versatile processes such as anion intercalation and exfoliation, decoration of nanoparticles, selfassembly with other two-dimensional(2D) materials, and controlled growth on conductive supports(e.g.,nanowire arrays, nanotubes, 3D foams). In this article, we briefly review the recent advances on both the LDH nanostructures and functionalized composites toward the applications in energy conversion, especially for water oxidation.     

T形微反应器共沉淀法制备Mg-Al层状双金属氢氧化物及其粒径可控性

采用T形微反应器通过共沉淀法制备了Mg-Al层状双金属氢氧化物(LDHs)纳米颗粒, 考察了流速、混合盐溶液浓度和温度等对产物粒径及其分布的影响. 实验结果表明, 所制备的LDHs样品的形貌和晶体结构与传统共沉淀法结果一致, 但本方法制备的样品粒径小、分布窄. 随着流速增大, 温度升高, 所合成的LDHs样品平均粒径减小, 分布变窄; 而随着混合盐溶液浓度的增大, 所得LDHs样品粒径增大, 分布变宽.     

Catalytic transfer hydrogenation of furfural into furfuryl alcohol over Ni–Fe‐layered double hydroxide catalysts

Layered double hydroxides (LDHs) and their derivatives have been reported to be widely used as heterogeneous catalysts in various reactions. Herein, Ni‐Fe LDHs with the controlled Ni/Fe molar ratios (2:1, 3:1, 4:1) were synthesized via an easy hydrothermal method, which were used to catalyze the selective reduction of biomass‐derived furfural into furfuryl alcohol using 2‐propanol as a H‐donor under autogenous pressure and characterized using FT‐IR, XRD, TGA, BET, SEM, NH₃‐TPD, and CO₂‐TPD. It was found that the LDH with a Ni/Fe molar ratio of 3:1 demonstrated the best catalytic activity among the LDHs with different Ni/Fe molar ratios, which showed 97.0% conversion of furfural and 90.2% yield of furfuryl alcohol at 140°C for 5 hr. This was attributable to the synergistic effect of acidic sites and basic sites of the catalyst.     

层状材料及催化

LDHs（1ayered double hydroxides）是一类结构可调的阴离子层状及插层结构功能材料,近些年来在催化领域得到了广泛的关注．本文综述了有关LDHs材料构筑原则的理论研究、组装方法及其在多相催化领域应用的最新进展．     

Compositional and structural control on anion sorption capability of layered double hydroxides (LDHs)

Layered double hydroxides (LDHs) have shown great promise as anion getters. In this paper, we demonstrate that the sorption capability of a LDH for a specific oxyanion can be greatly increased by appropriately manipulating material composition and structure. We have synthesized a large set of LDH materials with various combinations of metal cations, interlayer anions, and molar ratios of divalent cation M(II) to trivalent cation M(III). The synthesized materials have then been tested systematically for their sorption capabilities for pertechnetate (TcO(-)(4)). It is discovered that for a given interlayer anion (either CO(2-)(3) or NO(-)(3)) the Ni-Al LDH with a Ni/Al ratio of 3:1 exhibits the highest sorption capability among all the materials tested. The sorption of TcO(-)(4) on M(II)-M(III)-CO(3) LDHs may be dominated by the edge sites of LDH layers and correlated with the basal spacing d(003) of the materials, which increases with the decreasing radii of both divalent and trivalent cations. The sorption reaches its maximum when the layer spacing is just large enough for a pertechnetate anion to fit into a cage space among three adjacent octahedra of metal hydroxides at the edge. Furthermore, the sorption is found to increase with the crystallinity of the materials. For a given combination of metal cations and an interlayer anion, the best crystalline LDH material is obtained generally with a M(II)/M(III) ratio of 3:1. Synthesis with readily exchangeable nitrate as an interlayer anion greatly increases the sorption capability of a LDH material for pertechnetate. The work reported here will help to establish a general structure-property relationship for the related layered materials.     

Does organic modification of layered double hydroxides improve the fire performance of PMMA?

The effect of modified layered double hydroxides (LDHs) on fire properties of poly(methyl methacrylate) is investigated. Organically-modified LDHs were prepared via rehydration of calcined hydrotalcite in a palmitate solution. Composites consisting of the organo-LDHs, unmodified hydrotalcite and calcined oxides were prepared with poly(methyl methacrylate) using melt blending. Thermal and fire properties of the (nano)composites were studied. The thermogravimetric analyses of the composites show an increase in thermal stability. Fire performance, evaluated using cone calorimetry, show that organically-modified LDHs composites give the best reductions in peak heat release rate, PHRR, i.e., 51% at 10% weight loading. Dispersion of the LDHs was characterized using transmission electron microscopy and X-ray diffraction. Nanocomposite formation was observed with organically-modified LDHs, while the unmodified LDH composites gave only microcomposites.     

Large continuous, transparent and oriented self-supporting films of layered double hydroxides with tunable chemical composition

Highly ordered transparent self-supporting films of layered double hydroxides (LDHs) with a size of the order of cm2 have been obtained by a simple method; the chemical composition of both the layers and interlayers can be readily tuned, as demonstrated by the preparation of [ZnAl-NO3] LDH, [NiAl-NO3] LDH and [Tb(EDTA)]- intercalated-ZnAl LDH films.     

聚氯乙烯/层状双氢氧化物纳米复合材料研究进展

聚氯乙烯(PVC)/层状双氢氧化物(LDHs)纳米复合材料相比于纯聚氯乙烯具有更好的热稳定性、力学性能、阻燃抑烟性、耐候性与耐光性等,是一种性能优异并具有广泛应用前景的新型聚合物基纳米复合材料。本文首先介绍了LDHs的化学组成和结构特点,并对其制备过程和性质特点进行了分析和探讨;然后综述了PVC/LDH纳米复合材料的制备、结构表征及性能等方面的最新研究进展,重点阐述了LDHs的表面有机化处理及其对PVC/LDH纳米复合材料制备与性能的重要作用;最后对其应用前景进行展望。     

Layered double hydroxides intercalated with borate anions: Fire and thermal properties in ethylene vinyl acetate copolymer

Fire and thermal properties of ethylene vinyl acetate (EVA) composites prepared by melt blending with layered double hydroxides (LDH) have been studied. Two types of LDHs intercalated with borate anion were prepared using the coprecipitation method and the metals Mg²⁺, Zn²⁺ and Al³⁺. Characterization of the LDHs and the EVA composites was performed using X-ray diffraction, thermogravimetric analysis, and cone calorimetry. Thermal analyses show that the addition of LDHs improves the thermal stability of EVA. Fire properties evaluated using the cone calorimeter were significantly improved in the EVA/LDH composites. The peak heat release rate was reduced by about 40% when only 3% by weight of the LDH was added to the copolymer. Comparison of the fire properties of the LDHs with those of aluminum trihydrate (ATH), magnesium hydroxides (MDH), zinc hydroxide (ZH) and their combinations at 40% loading, reveal that the LDHs were more effective than when MDH and ZH are used alone.     

聚丙烯酰胺/层状无机物纳米复合材料研究进展

聚丙烯酰胺(PAM)/层状无机物纳米复合材料相比于纯PAM具有更好的力学性能、超吸水性能、热稳定性能和气体阻隔性能等,是一种性能优异并在采油、农业和卫生学等领域有着广泛应用前景的新型聚合物基纳米复合材料。本文对近年来聚丙烯酰胺/层状无机物纳米复合材料的研究进展进行了综述。首先重点介绍了层状双氢氧化物(LDHs)在有机溶剂和水中剥离分散方面的研究进展,接着综述了PAM/LDH和PAM/粘土纳米复合材料的制备与结构表征,最后阐述了PAM/层状无机物纳米复合材料的流变性能、力学性能和超吸水性能等。     

Variation of benzyl anions in MgAl-layered double hydroxides: Fire and thermal properties in PMMA

Magnesium aluminum layered double hydroxides (MgAl-LDHs) intercalated with a range of benzyl anions were prepared using the coprecipitation method. The benzyl anions differ in functionality (i.e. carboxylate, sulfonate, and phosphonate) and presence or absence of an amino substituent. Various methods for preparing LDHs (i.e. ion exchange, coprecipitation and rehydration of the calcined LDH methods) have been compared with the MgAl-benzene phosphonate and their effect on fire and thermal properties was studied. After characterization, the MgAl-LDHs were melt-blended with poly(methyl methacrylate) (PMMA) at loadings of 3 and 10% by weight to prepare composites. Characterization of the LDHs and the PMMA composites was performed using FTIR, XRD, TGA, transmission electron microscopy (TEM) and cone calorimetry. FTIR and XRD analyses confirmed the presence of the charge balancing benzyl anions in the galleries of the MgAl-LDHs. Improvements in fire and thermal properties of the PMMA composites were observed. The cone calorimeter revealed that the addition of 10% MgAl-LDHs reduces the peak heat release rate by more than 30%.     

Cholinesterase immobilisation on the surface of screen-printed electrodes based on concanavalin A affinity

This paper reports a new method for the immobilisation of acetylcholine esterase (AChE) on the surface of screen-printed electrodes (SPEs) based on the affinity between the glycoprotein enzyme and concavalin A (Con A). The surface of the working electrode has been modified with a Nafion layer that contains graphite, the mediator 7,7,8,8-tetracyanoquinodimethane (TCNQ) and heptylamine. The enzyme-free SPEs were characterised by cyclic voltammetry in buffer solutions and amperometry using cysteamine as analyte. The AChE immobilisation process leads to the sandwich structure: electrode-carbohydrate-Con A-enzyme. The first step of the immobilisation is the covalent activation of an amino group bound in a Nafion layer. The following steps are based on the affinity. The non-specific adsorption has been totally eliminated using BSA solutions at two different pHs. Various amounts of enzyme, from 0.1 to more than 2 mIU AChE, have been loaded on the electrode surface. The method offers the advantage of a free diffusion, which allows obtaining a response time of less than 2 min. An operational stability of more than 10 measurements was registered, while the active surface of the electrode was successfully reloaded for three consecutive times without any important change of the analytical performances.