第二代生物柴油技术研究进展

第二代生物柴油是指在高温高压下,利用催化加氢脱氧反应等技术将动植物油脂转化为具有石化燃料品质的碳氢燃料,是能源领域最热门和最有前途的技术之一.本文作者对动植物油原料来源,加氢脱氧反应机理,主要的加氢生产工艺以及加氢催化剂的研究进展进行了综述,并且分析了发展第二代生物柴油的难点和发展趋势.     

柴油加氢精制催化剂制备技术

柴油加氢精制催化剂制备技术的发展大致经历了3个阶段,由此形成了三代柴油加氢催化剂:单层分散的负载型金属硫化物催化剂,多层分散的负载型金属硫化物催化剂和非负载型金属硫化物催化剂.本文对金属硫化钼基柴油加氢精制催化剂的应用背景、制备思想及催化剂研究开发现状进行了系统的总结,对柴油加氢催化剂的发展方向进行了展望.     

柴油加氢精制催化剂制备技术

柴油加氢精制催化剂制备技术的发展大致经历了3个阶段,由此形成了三代柴油加氢催化剂:单层分散的负载型金属硫化物催化剂,多层分散的负载型金属硫化物催化剂和非负载型金属硫化物催化剂.本文对金属硫化钼基柴油加氢精制催化剂的应用背景、制备思想及催化剂研究开发现状进行了系统的总结,对柴油加氢催化剂的发展方向进行了展望.     

过渡金属催化的醇类脱氧脱水反应

开发和利用环境保护型的可再生新能源是缓和与解决能源环境问题的重要举措.生物质可作为燃料和可再生平台化学品的来源.高含氧量与过度官能化的生物质原料不能直接使用,因此降低生物质原料的含氧量并将其转化为燃料与增值化学品的方法是实现生物质能广泛应用的关键.还原脱氧的方法主要有热解、水解、氢解、脱羧/脱羰反应、加氢脱氧与脱氧脱水反应等.本综述详细介绍了铼、钼、钒、钌等四种过渡金属催化的由二元醇及多元醇制备相应烯烃的脱氧脱水反应,主要从均相催化、还原剂使用、机理研究和非均相催化等方面做了多角度的总结.铼催化的脱氧脱水反应具有选择性好和烯烃产率高等优点,钼、钒、钌等金属是可能替代昂贵的铼金属的催化剂.     

Ni/SAPO-11催化剂上棕榈油加氢脱氧制异构烃燃料(英)

采用水热法合成了小粒径、具有介孔结构的SAPO-11分子筛.采用浸渍法制备了不同Ni负载量的Ni/SAPO-11催化剂.并采用X射线衍射,扫描电镜,N₂物理吸附-脱附,NH₃程序升温脱附,热重和H₂化学吸附技术对该类催化剂的物理化学性质进行了详细表征.结果表明,SAPO-11较大表面积和介孔结构可分散Ni,使得Ni粒子尺寸较小.在棕榈油加氢脱氧制备液体烃类燃料反应中,液体烷烃产物由相关脂肪酸中间产物的直接加氢脱氧和脱羰-加氢脱氧两种途径产生.Ni/SAPO-11催化剂的弱/中强酸性质及其匹配的金属-酸双功能可显著抑制积炭反应,提高催化剂的寿命,液体烷烃收率高达70%,异构烷烃选择性超过80%.     

Ni/SAPO-11催化剂上棕榈油加氢脱氧制异构烃燃料(英)

采用水热法合成了小粒径、具有介孔结构的SAPO-11分子筛.采用浸渍法制备了不同Ni负载量的Ni/SAPO-11催化剂.并采用X射线衍射,扫描电镜,N_2物理吸附-脱附,NH_3程序升温脱附,热重和H_2化学吸附技术对该类催化剂的物理化学性质进行了详细表征.结果表明,SAPO-11较大表面积和介孔结构可分散Ni,使得Ni粒子尺寸较小.在棕榈油加氢脱氧制备液体烃类燃料反应中,液体烷烃产物由相关脂肪酸中间产物的直接加氢脱氧和脱羰-加氢脱氧两种途径产生.Ni/SAPO-11催化剂的弱/中强酸性质及其匹配的金属-酸双功能可显著抑制积炭反应,提高催化剂的寿命,液体烷烃收率高达70%,异构烷烃选择性超过80%.     

柴油加氢精制催化剂制备技术

柴油加氢精制催化剂制备技术的发展大致经历了3个阶段,由此形成了三代柴油加氢催化剂:单层分散的负载型金属硫化物催化剂,多层分散的负载型金属硫化物催化剂和非负载型金属硫化物催化剂。本文对金属硫化钼基柴油加氢精制催化剂的应用背景、制备思想及催化剂研究开发现状进行了系统的总结,对柴油加氢催化剂的发展方向进行了展望。     

生物油中酚类化合物加氢脱氧催化剂研究进展

随着化石能源日益匮乏,生物质热裂解制备生物油广受关注.然而,生物油中含有大量酚、呋喃、醛、酮等含氧化合物,含氧量高达50%,导致其热值低、化学稳定性差等,因而阻碍了它的广泛应用,必须对其进行加氢脱氧精制降低含氧量.在生物油中众多含氧化合物中,酚羟基氧被认为是最难被脱除的.对酚类含氧化合物加氢脱氧催化剂及反应进行了简单综述,并提出了如何进一步提高催化剂性能的有效方法.     

油脂催化转化为绿色燃料的技术进展

油脂是一类非常重要的绿色可再生能源载体.运用催化技术将油脂高效地转化为液态燃料尤其是绿色烃类燃料是当前生物质转化利用中最具有工业化应用潜力的方向,因此备受关注.本文从油脂催化转化技术中的酯交换技术、催化裂化技术、硫化态和还原态金属加氢脱氧技术等方面阐述了国内外科研前沿领域在催化剂、工艺、反应路径及机理等方面的进展.对未来多种油脂原料转化为烃类燃料尤其是生物航煤的技术路线进行了分析与建议.     

MIL-53(Al)衍生的Rh单原子催化剂在间氯硝基苯选择性加氢制间氯苯胺反应中的应用

卤代苯胺是化学工业中重要的中间体,主要用于制造药物、聚合物、染料等含氮化学品,用多相金属催化剂催化卤代硝基芳烃加氢制备卤代苯胺是一种高效,绿色和可持续发展的生产工艺.该过程需要选择性加氢硝基基团,同时避免卤素基团的脱卤副反应发生.然而,化学选择性加氢存在巨大的挑战,难点在于催化剂的精准设计,一方面要求具备对硝基基团合适的加氢能力,另一方面要阻止对卤素基团的脱卤副反应发生.基于此,研制高效多相金属催化剂用于卤代硝基芳烃选择性加氢制备卤代苯胺反应引起了高度关注.近年来,单原子金属催化剂受到越来越多的关注,并在卤代硝基芳烃选择性加氢制备卤代苯胺反应中显现出极大的潜力.本文通过在金属有机骨架材料MIL-53(Al)自组装的过程中将金属Rh原位嫁接其骨架结构中,继而通过限域热解的方法制备了Rh@Al2O3@C单原子催化剂,其在间氯硝基苯(m-CNB)加氢制间氯苯胺(m-CAN)反应中显现了高效催化选择性.球差校正高角度环形暗场模式的透射电镜,CO作为探针分子的红外光谱和X射线光电子能谱等结果发现,Rh是以单原子的形式均匀的分布在Al2O3上并被无定型碳包覆,且Rh化学价态呈正价.而27Al固体核磁共振与密度泛函理论计算的结果则进一步确定Al2O3@C载体中存在的五配位的Al物种(AlV)是锚定Rh单原子的主要位点,AlV的不饱和的配位结构可以有效地稳定Rh单原子,对形成Rh位点的单原子分散至关重要.在间氯硝基苯选择性加氢制间氯苯胺反应中,与等体积浸渍法制备的Rh/C和Rh/γ-Al2O3纳米催化剂相比,Rh@Al2O3@C单原子催化剂表现出优异催化性能:其在313 K,氢气压力为20 bar的温和条件下转换频率(TOF)高达2317 molm-CNB·molRh-1·h-1,优于已报道的多相金属催化剂,是目前的最高值.此外,该催化剂展现出极佳的稳定性能,经过五次循环后,该催化剂对m-CAN的选择性仍旧保持在98％左右.Rh@Al2O3@C单原子催化剂的优异催化性能源自于金属单原子结构的形成对于金属位点电子结构的有效调节,进而调控催化剂加氢性能并实现对加氢脱卤副反应的抑制;与此同时,Rh@Al2O3@C催化剂增进了酸位点的可及性,从而促进了其串联步骤中包含的脱水反应的发生,进而有效提高催化剂的反应活性.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

探究“铁的锈蚀条件”实验创新设计

设计了铁的锈蚀实验,说明了铁钉的处理方法,增加了温度、酸、碱的影响条件,实现了铁跟蒸馏水及空气中氧气快速反应而生锈,使实验在5 min左右就能够得到准确的结果。