Determination of the enthalpy of fusion of K<Subscript>3</Subscript>TaO<Subscript>2</Subscript>F<Subscript>4</Subscript> and KTaF<Subscript>6</Subscript>

Areas of fusion and crystallization peaks of K₃TaO₂F₄ and KTaF₆ were measured using the DSC mode of a high-temperature calorimeter (SETARAM 1800 K). On the basis of these quantities, considering the temperature dependence of the calorimeter sensitivity, values of the fusion enthalpy of K₃TaO₂F₄ at the fusion temperature of 1181 K of (43 ± 4) kJ mol⁻¹ and of KTaF₆ at the fusion temperature of 760 K of (8 ± 1) kJ mol⁻¹ were determined.     

Determination of the enthalpy of fusion of Na<Subscript>3</Subscript>FeF<Subscript>6</Subscript>

The areas of the fusion and crystallization peaks of Na₃FeF₆ and of four calibration substances (KCl, NaCl, Na₂SO₄, and K₂SO₄) were measured using the DSC mode of a high-temperature calorimeter. Using the measured quantities and known values of the enthalpy of fusion of the calibration substances, the enthalpy of fusion of Na₃FeF₆ was determined. Its value at the temperature of fusion 1224 K was 70 ± 4 kJ mol⁻¹.     

Modeling the active centers of V<Subscript>2</Subscript>O<Subscript>5</Subscript>/SiO<Subscript>2</Subscript> and V<Subscript>2</Subscript>O<Subscript>5</Subscript>/TiO<Subscript>2</Subscript> supported catalysts. DFT theoretical analysis of optical properties

Within the framework of the density functional theory (DFT), the electronic structure of monooxodioxovanadium functional groups in tetrahedral coordination, which model the active centers (ACs) of fine supported catalysts V₂O₅/SiO₂ and V₂O₅/TiO₂, has been analyzed. The optimal structures of three ACs as possible models of monomeric and polymeric oxovanadium forms on the carriers with low vanadium content were determined. The modified DFT method involving the time dependence of Kohn-Sham equation (TDDFT) was used for the adopted AC models to calculate the energies of the excited states, and optical spectra of the absorption in 25000–60000 cm^?1 region were reconstructed on their base. The spectrum in this region is due to O → V charge transfer. The features of electronic spectra with the charge transfer for V₂O₅/SiO₂ and V₂O₅/TiO₂ catalysts and the vibrational spectra of three AC models corresponding to the monomeric and dimeric oxovanadium forms of the supported catalysts V₂O₅/SiO₂ and V₂O₅/TiO₂ were defined. The detailed interpretation of normal vibration frequencies is given. The frequencies typical of the monomeric and dimeric oxovanadium forms on the carrier surface were identified.     

Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/Au composite nano-particles and their optical properties

Fe₃O₄/Au composite particles with core/shell structure were prepared by reduction of Au³⁺ with hydroxylamine in the presence of an excess of Fe₃ O₄ as seeds. The resultant colloids, with an average diameter of less than 100 nm, were obtained; the remaining non-reacted Fe₃O₄ seeds can be removed by treatment with diluted HCl solution. The Fe₃O₄/Au colloids exhibit a characteristic peak of UV-visible spectra, which largely depend on the size of the particle and the suspension medium. The localized surface plasmon resonance peaks red shift and broaden with increased nanoparticle diameter or increased solvent ionic strength. The optical property is very important in the establishment of means for the detection of biomolecules.     

The group-theoretical structure of the atomic g shell: connection with the alternating group <Emphasis Type="Italic">A</Emphasis><Subscript>6</Subscript> as <Emphasis Type="Italic">L</Emphasis><Subscript>2</Subscript>(9)

The special projective linear groups PSL(2ℓ + 1) or L ₂(2ℓ + 1) of order 2ℓ(2ℓ + 1)(ℓ + 1) can be used to study atomic shells of electrons with angular momentum quantum number ℓ corresponding to the atomic p, d, f, and g shells for ℓ = 1, 2, 3, 4, respectively. For the atomic g shell the group L ₂(9) is isomorphic with the alternating group A ₆ on six objects of order 360 or the symmetry group of the 5-dimensional simplex, a 5-dimensional analogue of the tetrahedron with 6 vertices and 15 edges. This leads to the subgroup chain SO(9) ⊃ SO(5) ⊃ L ₂(9) for the atomic g shell analogous to the subgroup chain SO(7) ⊃ G ₂ ⊃ L ₂(7) ≈⁷ O for the atomic f shell. In the L ₂(9) group only the representations of spherical harmonics or sums thereof, Γ(Y_ℓ), with dimensions dim Γ(Y_ℓ) or dim Γ(Y_ℓ) ± 1 divisible by 9 are found to be individually reducible to irreducible representations (irreps) or sums of irreps of L ₂(9). This leads to term groupings such as S, PD, G, PF, DH, L, PK, DI, FH, M, FI, PO, DN, HK, R, etc., of increasing total dimension for the irreps of SO(9) for various g ⁿ configurations in the atomic g shell.     

Formation and properties of the Fe<Subscript>8</Subscript>V<Subscript>10</Subscript>W<Subscript>16–x</Subscript>Mo<Subscript>x</Subscript>O<Subscript>85</Subscript> type solid solution

Solid solution phases of a formula Fe₈V₁₀W_16–xMo_xO₈₅ where 0≤x≤4, have been obtained, possessing a structure of the compound Fe₈V₁₀W₁₆O₈₅. It was found on the base of XRD and DTA investigations that these solution phases melted incongruently, with increasing the value of x, in the temperature range from 1108 (x=0) to 1083 K (x=4) depositing Fe₂WO₆ and WO₃. The increase of the Mo⁶⁺ ions content in the crystal lattice of Fe₈V₁₀W₁₆O₈₅ causes the lattice parameters a=b contraction with cbeing almost constant. IR spectra of the Fe₈V₁₀W_16–xMo_xO₈₅ solid solution phases have been recorded.     

Formation of Composites Based on CsHSO<Subscript>4</Subscript> and Cs<Subscript>5</Subscript>H<Subscript>3</Subscript>(SO<Subscript>4</Subscript>)<Subscript>4</Subscript> and Mechanism of Their Protonic Conduction

Vibrational spectra of finely divided amorphous CsHSO₄,Cs₅H₃(SO₄)₄ · H₂O, and composites based on these are measured and analyzed. An analysis of the spectra indicates the occurrence of substantial changes in the system of hydrogen bonds and in the spectral range of the sulfate group of acid sulfates in the composites. Structural dynamics of the SO₄ tetrahedrons is in full conformance with protonic conduction and the data of x-ray diffraction analyses accompanied by differential scanning calorimetry. It is shown that mobility of protons in the composites increases. A mechanism of the formation of the composites and their conduction is proposed.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 640–645.Original Russian Text Copyright © 2005 by Ponomareva, Lavrova, Burgina.     

Quantum-chemical modelling of nanotubes of titanium silicocarbides Ti<Subscript>2</Subscript>SiC,Ti<Subscript>3</Subscript>SiC<Subscript>2</Subscript>, and Ti<Subscript>4</Subscript>SiC<Subscript>3</Subscript>

Atomic models are proposed for nanotubes of the titanium silicocarbides Ti₂SiC, Ti₃SiC₂, and Ti₄SiC₃, and their electronic structure and interatomic interactions are investigated by the density functional tight-binding method (DFTB) in comparison with the corresponding crystalline phases. Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 45, No. 2, pp. 88-92, March-April, 2009.     

Facilitated Transport of C<Subscript>2</Subscript>H<Subscript>4</Subscript> in a SiO<Subscript>2</Subscript>-poly(N-vinylpyrrolidone)-Ag<Superscript>+</Superscript> Inorganic-Organic Hybrid Membrane

Inorganic-organic hybrid membranes containing silica as the structure matrix, poly(N-vinylpyrrolidone) (PVP) as the organic mediating agent and silver ions as olefinic carriers were prepared using sol–gel method and dip-coating process. The structure and permeances of the membranes for N₂, He, C₂H₄, C₂H₆ at different temperatures indicated that defect-free membranes were obtained and the transportation of the C₂H₄ through the membranes followed the dissolution and diffusion mechanism. Ideal separation factors of C₂H₄/C₂H₆ through the membranes were evaluated at the temperature of 298, 373 and 423 K respectively using mixture gas of 50% C₂H₄-50% C₂H₆. The results showed that the ideal separation factors of C₂H₄/C₂H₆ through the membranes were obviously greater than the ratio of PC₂H₄/PC₂H₆ obtained from the single gas measurement due to the hindering effect by the adsorbed C₂H₄. The ideal separation factors of C₂H₄/C₂H₆ increased with temperature and reached 10 at 423 K, which suggested that C₂H₄ and C₂H₆ could be separated at lower humidity compared to the reported organic polymer/silver salt membranes in which humidified gases and higher silver loading were usually used. The transport of C₂H₄ in the inorganic-organic hybrid membrane was proposed to follow the hopping mechanism, that is, olefins moved across the fixed silver sites.     

Thermal oxide synthesis and characterization of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanorods and Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanowires

Fe₃O₄ nanorods and Fe₂O₃ nanowires have been synthesized through a simple thermal oxide reaction of Fe with C₂H₂O₄ solution at 200–600°C for 1 h in the air. The morphology and structure of Fe₃O₄ nanorods and Fe₂O₃ nanowires were detected with powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The influence of temperature on the morphology development was experimentally investigated. The results show that the polycrystals Fe₃O₄ nanorods with cubic structure and the average diameter of 0.5–0.8 μm grow after reaction at 200–500°C for 1 h in the air. When the temperature was 600°C, the samples completely became Fe₂O₃ nanowires with hexagonal structure. It was found that C₂H₂O₄ molecules had a significant effect on the formation of Fe₃O₄ nanorods. A possible mechanism was also proposed to account for the growth of these Fe₃O₄ nanorods. Supported by the Fund of Weinan Teacher’s University (Grant No. 08YKZ008), the National Natural Science Foundation of China (Grant No. 20573072) and the Doctoral Fund of Ministry of Education of China (Grant No. 20060718010)     

Molar heat capacity and thermodynamic properties of crystalline Ho(Asp)Cl<Subscript>2</Subscript>·6H<Subscript>2</Subscript>O

The molar heat capacity, C _p,m, of a complex of holmium chloride coordinated with L-aspartic acid, Ho(Asp)Cl₂·6H₂O, was measured from 80 to 397 K with an automated adiabatic calorimeter. The thermodynamic functions H _T-H _298.15 and S _T-S _298.15 were derived from 80 to 395 K with temperature interval of 5 K. The thermal stability of the complex was investigated by differential scanning calorimeter (DSC) and thermogravimetric (TG) technique, and the mechanism of thermal decomposing of the complex was determined based on the structure and the thermal analysis experiment.     

Synthesis and characterization of Pb<Subscript>1–x</Subscript>La<Subscript>x</Subscript>TiO<Subscript>3</Subscript> nanocrystalline powders

Pb_1–xLa_xTiO₃ (PLT) nanocrystalline powders were obtained by polymeric precursor method. The samples were analyzed by differential scanning calorimetry (DSC) and thermogravimetry (TG) techniques to characterize properly the distinct thermal events occurring during synthesis. The X-ray diffraction patterns show a tetragonal structure for the samples with x=0.10 and 0.15. An increase of the lanthanum concentration to x=0.20 led to a highly symmetric structure, cubic on average. The powders obtained at the end of the synthesis had an average particle size of 30 to 70 nm.     

Preparation and characterization of LiFePO<Subscript>4</Subscript> from NH<Subscript>4</Subscript>FePO<Subscript>4</Subscript>·H<Subscript>2</Subscript>O under different microwave heating conditions

Olivine-type LiFePO₄ is a very promising polyanion-type cathode material for lithium-ion batteries. In this work, LiFePO₄ with high specificity capacity is obtained from a novel precursor NH₄FePO₄·H₂O via microwave processing. The grains grow up in the duration of sintering until they reach the decomposition temperature. The apparent conductivity of the samples rises rapidly with the irradiation time and influences the electrochemical performance of the material greatly at high current density. As a result, the LiFePO₄ cathode material obtained with a sintering time of 15 min has good electrochemical performance. Between 2.5 and 4.2 V versus Li, a reversible capacity is as high as 156 mAh g⁻¹ at 0.05 C.     

Molecular structure of NiO<Subscript>2</Subscript>N<Subscript>2</Subscript>C<Subscript>16</Subscript>H<Subscript>14</Subscript> from gas-phase electron diffraction and quantum chemical data

Gas-phase electron diffractometry was used to study the molecular structure of N,N′-ethylenebis(salicylaldiminato)nickel(II), NiO₂N₂C₁₆H₁₄, [hereinafter Ni(salen)] at 583(5) K. The molecule has C ₂ symmetry with a practically planar structure of the NiN₂O₂ coordination unit and with internuclear distances r _α (Ni-O) = 1.882(21) Å and r _α (Ni-N) = 1.889(22) Å. The results of B3LYP/CEP-31G molecular structure calculations are in good agreement with experimental data, whereas the RHF/CEP-31G method significantly overestimates the Ni-N internuclear distance and gives worse results for other structural parameters. According to 3LYP/CEP-31G calculations, the ¹ A low-spin state is 28 kJ/mole lower in energy than the ³ B high-spin state.     

Quantum-chemical DFT calculations of the molecular structure of N<Subscript>2</Subscript>O<Subscript>5</Subscript> in the gas and solid phases

By functional density quantum-chemical method (DFT/B3LYP using the 6-311++G(3df)) it has been shown that the molecular structures of N₂O₅ with C_s and C₂ symmetries are energetically equivalent. It follows from calculations of the vibrational frequencies that both structures are characterized by potential energy minima and correspond to stationary states of the N₂O₅ molecule. It is proposed, on the basis of a comparison of the calculated and experimental vibrational spectra of N₂O₅, that dinitrogen pentaoxide exists in the gas phase as an equimolecular mixture of N₂O₅ molecules with Cs and C₂ symmetry, while in the solid phase it is characterized by the C₂ molecular structure. __________ Translated from Teoreticheskaya I éksperimental’naya Khimiya, Vol. 43, No. 1, pp. 58–63, January–February, 2007.     

Electronic structure and magnetic properties of double perovskites Sr<Subscript>2</Subscript>FeMO<Subscript>6</Subscript> (M = Sc,Ti, ..., Ni,Cu) according to the data of FLAPW-GGA band structure calculations

Changes in the electronic structure and magnetic characteristics of Sr₂FeMO₆ double perovskites were studied by the FLAPW-GGA ab initio band structure method in relation to the type of the cation M = Sc, Ti, ..., Ni, Cu.     

Sol–gel synthesis,characterization and photocatalytic activity of mesoporous TiO<Subscript>2</Subscript>/γ-Al<Subscript>2</Subscript>O<Subscript>3 </Subscript>granules

Mesoporous TiO₂/γ-Al₂O₃ composite granules were prepared by combining sol–gel/oil-drop method, using various titania solution. The product granules can be used as a photocatalyst or adsorbent in moving, fluidized bed reactors. The phase composition and pore structure of the granules can be controlled by calcination temperature and using different titania solution. In the photocatalysis of NH₃ decomposition, TiO₂/γ-Al₂O₃ granules using Degussa P25 powder treated thermally at 450 °C showed the highest catalytic ability. However, TiO₂/γ-Al₂O₃ granules using titania made by hydrothermal method had comparable performance in NH₃ decomposition.     

Preparation of novel visible-light-driven In<Subscript>2</Subscript>O<Subscript>3</Subscript>–CaIn<Subscript>2</Subscript>O<Subscript>4</Subscript> composite photocatalyst by sol–gel method

Novel visible-light-activated In₂O₃–CaIn₂O₄ photocatalysts were developed in this paper through a sol–gel method. The photocatalytic activities of In₂O₃–CaIn₂O₄ composite photocatalysts were investigated based on the decomposition of methyl orange under visible light irradiation (λ > 400 nm). The obtained samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrum (EDS), X-ray photoelectron spectroscopy (XPS) and UV–vis diffused reflectance spectroscopy (DRS). The results revealed that the In₂O₃–CaIn₂O₄ composite samples with different In₂O₃ and CaIn₂O₄ content can be obtained by controlling the synthesis temperature, and the composite photocatalysts extended the light absorption spectrum toward the visible region. The photocatalytic tests indicated that the composite samples demonstrated high visible-light activity for decomposition of methyl orange. The significant enhancement in the In₂O₃–CaIn₂O₄ photo-activity under visible light irradiation can be ascribed to the efficient separation of photo-generated carriers in the In₂O₃ and CaIn₂O₄ coupling semiconductors.     

LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> and LiCoO<Subscript>2</Subscript> composite cathode materials obtained by mechanical activation

New composite cathode materials xLiMn₂O₄/(1 ? x) LiCoO₂(x = 0.7, 0.6, 0.5 и 0.4) were obtained by mechanical activation. According to scanning electron microscopy data, the process was accompanied by pronounced dispersion and fine mixing of the initial components. In the course of the preparation and electrochemical cycling of the composites, LiMn₂O₄ and LiCoO₂ partially reacted, leading to the replacement of manganese with cobalt in the structure of spinel, which was detected by powder X-ray diffraction (XRD), IR and X-ray photoelectron spectroscopy (XPS), and cyclic chronopotentiometry. The specific discharge capacity of composites was ～100 mAh/g.