The Synthesis and Electronic Characteristics of Poly(p-Phenylene Vinylene) Derivatives

Poly(P-phenylenevinylene)rePV)anditsderivahveshavearousedgreatinterest,"'sinceBurroughes'discoveredilmtPPVshowedexcellentelectrolulninescent(EL)propelles.However,PPVanditsderivativessynthesizedbyconventionalpolylnerizationreachons4areusuallyinsolubleandinfusible,wllicllshowsinferiorineclwnicalpropelles.AlthoughtheprecursorpolymerroutecancirculllventhleinsolubilityofPPV,thestfategyneedsamuhstepreachonandaltiglltemperaturewlilcllaITordsaleyieldandohlerdisadvantages.'So1lieSynthesisofsolub…     

聚(2-甲氧基-5-壬氧基)对苯乙炔的合成及其电致发光性质

以对甲氧基苯酚和溴代正壬烷为原料,通过醚化、氯甲基化和脱氯化氢反应得到可溶性的聚（２－甲氧基－５－壬氧基）对苯乙炔,以其为发光层装配了聚合物单层电致发光器件,研究了它的电致发光和光致发光性质;电致发光器件具有良好的稳定性,其起亮电压为７Ｖ。聚合物的结构由ＩＲ、＾１Ｈ－ＮＭＲ及ＵＶ／Ｖｉｓ光谱得到确认。     

Study on the Synthesis of Poly(p-Phenylene Vinylene) Derivatives by Dehydrochlorination

The synthesis of poly(p-phenylene vinylene) (PPV) and its derivatives have aroused great interest^[1],since Burroughes^[2] discovered that PPV showed excellent electroluminescent (EL) properties. The conventional polymerization reactions, such as dehydrochlorination reaction,Wittig reaction and et al, usually afforded insoluble and/or infusible PPV and its derivatives, which shows inferior mechanical properties. Though the precursor polymer route can circumvent the insolubility of PPV, the strategy needs muti-step reaction and high temperature which affords the low yield and other disadvantageous^[3]. So the synthesis of soluble PPV derivatives with high yield are very fascinating.     

Synthesis and Characterization of Bagasse Poly(methyl methacrylate) Graft Copolymer

Summary: Graft copolymerization of methyl methacrylate (MMA) was carried out on bagasse fibers in an aqueous medium using ceric ammonium nitrate (CAN) as initiator under a neutral atmosphere. In order to obtain the optimum condition for graft copolymerization, the effects of initiator concentration, temperature, time of reaction, and monomer concentration were studied. The maximum grafting percent was found to be 122%. The bagasse grafted poly(methyl methacrylate) was characterized by FTIR and its thermal behavior was characterized by TGA.     

脱氯化氢法合成聚(2,5-二乙氧基对苯乙炔)

聚对苯乙炔（ＰＰＶ）及其衍生物具有独特的光电性能，经强氧化剂掺杂后是一类重要的导电材料［１］，而且具有良好的非线性光学（ＮＬＯ）性质［２］，也是目前为止性能最好的电致发光材料［３］，因而ＰＰＶ及其衍生物的合成成为电致发光领域研究的热点之一。目前国内外...     

Synthesis,Characterization and Application of Amphiphilic Copolymer Poly(vinyl alcohol)-g-Poly(butyl acrylate)

An amphiphilic graft copolymer poly(vinyl alcohol)-g-poly(butyl acrylate) (PVA-g-PBA) was synthesized by grafting butyl acrylate (BA) onto poly(vinyl alcohol) (PVA) with potassium persulfate (KPS) as free radical initiator in N₂ atmosphere and aqueous medium. The formation of graft copolymer was confirmed by means of infrared spectroscopy (IR). The influences of initiator, monomer concentration and reaction time on the percentage of monomer conversion(C _M), graft degree(Gd) and graft efficiency(Ge) have been discussed in detail. PVA-g-PBA was used as compatibilizer in blends of chlorinated polyethylene (CPE)/ poly(acrylic acid-co-acrylamide)[P(AA-AM)], and the compatibility between CPE and P(AA-AM) was also investigated.     

聚（2，5－二甲氧基对苯乙炔）的可溶性前聚物合成及表征

研究了合成聚（２，５－二甲氧圣对苯乙炔）的有机可溶性前聚物的反应条件与单体转化率和前聚物产率的关系。实验结果表明：ＮａＯＨ是聚合反应的有效引发剂。适宜的反应条件为：单体与ＮａＯＨ摩尔比为１：１，单体浓度０．０５～０．２ｍｏｌ／Ｌ聚合时间２ｈ，温度低于５℃。正已烷、石油醚作为有机提取剂可有效提高前聚物产率，用ＩＲ、ＵＶ－Ｖｉｓ、￣１ＨＮＭＲ、ＴＧＡ和ＤＳＣ对前聚物进行了表征。     

甲基丙烯酸丁酯接枝纤维素的制备

为开发纤维素基吸油材料,以棉浆粕为基材、甲基丙烯酸丁酯(BMA)为单体、乙二醇二甲基丙烯酸酯为交联剂,采用悬浮接枝聚合法合成了BMA接枝纤维素的聚合物。采用红外光谱(FT-IR)、X射线衍射(XRD)、扫描电镜(SEM)、热重(TG)、差热(DSC)等手段对所得吸油材料结构进行了表征。考察了引发剂的种类及用量、接枝单体及交联剂用量、反应温度、反应时间等因素对BMA接枝纤维素聚合物的接枝聚合反应性能及吸油性能的影响。结果表明:当m(棉浆粕)∶m(K2S2O8)∶m(BMA)∶m(乙二醇二甲基丙烯酸酯)=1∶0.025∶1.5∶0.005,75℃下恒温反应6 h,合成的BMA接枝纤维素的接枝率最高(36.2%),均聚物含量相对较低(5.8%),且吸油性能优良。     

聚（2,5—二甲氧基对苯乙炔）的可溶性前聚物合成及表征

研究了合成聚（２，４－二甲氧基对苯乙炔）的有机可溶性前聚物的反应条件与单体转化率和前聚物产率的关系。实验结果表明：ＮａＯＨ是聚合反应的有效引发剂，适宜的反应条件为：单体与ＮａＯＨ摩尔比为１：１，单体浓度０．０５－０．２ｍｏｌ／Ｌ，聚合时间２ｈ，温度低５℃，正己烷、石油醚作为有机提取剂可有效提高前聚物产率。用ＩＲ、ＵＶ－Ｖｉｓ＇＾ＨＮＭＲ，ＴＧＡ和 ＤＳＣ对前聚物进行了表征。     

可溶性聚对苯乙炔衍生物的合成

聚对苯乙炔（ＰＰＶ）具有独特的光电性能,经强氧化剂掺杂后是一类重要的导电材料［１］,而且具有良好的非线性光学（ＮＬＯ）性质［２］,也是目前性能最好的高分子电致发光材料［３,４］．可溶性的ＰＰＶ衍生物有望在显示领域广泛应用,从而成为电致发光领域研究的新...     

Synthesis and Study of a Sulfur Heterocycle Fused p-Phenylene Vinylene Conducting Polymer

Abstract

Poly(benzo[1,2-b:4,5-b′]dithiophene-4,8-diyl vinylene) (1) has been prepared by the pyrolysis of the precursor polymer 2 and studied. Quantum mechanical calculations on the aromatic and quinoid monomers, oligomers and polymers indicate that 1 is a planar aromatic polymer.     

不对称烷氧基取代聚对苯乙炔的合成及电致发光性能

利用强碱诱导的去卤缩合聚合法，合成了不对称烷氧基取代的聚（２－甲氧基－５－十二烷氧基－１，４－对苯乙炔）（ＰＭＤＰＶ）．其溶解性和成膜性能优于对称取代的聚（２，５－双十二烷氧基－１，４－对苯乙炔）．以ＰＭＤＰＶ为发光层质的聚合物电致发光器件，其发光峰值波长为６０５ｎｍ．并用ＩＲ、ＵＶ－Ｖｉｓ、ＴＧＡ、１ＨＮＭＲ、ＧＰＣ等对所合成的聚合物进行了表征．     

Synthesis and Characterization of Amphiphilic Biodegradable Copolymer,Poly(aspartic acid‐co‐lactic acid)

An amphiphilic biodegradable polymer, poly(aspartic acid‐co‐lactic acid) (PAL), was synthesized by simply heating a mixture of aspartic acid (Asp) and L ‐lactide without additional catalysts or solvents. The unique branched architecture comprising succinimide units and lactic acid units was confirmed by IR and NMR spectroscopy. A copolymer of sodium aspartate and lactic acid (PALNa) was prepared by reacting PAL with an aqueous sodium hydroxide solution. The PAL was soluble in many organic solvents, while the PALNa was soluble in methanol and water. The hydrolytic degradation behavior of PAL varied with the copolymer composition. A higher Asp content resulted in a faster molecular weight decrease, and introducing glycolic acid units accelerated the degradation rate.

Microphotograph of microsphere of PAL‐1/5.     

聚硅乙炔烷的合成与性能研究

70年代初苏联学者首次报道了聚硅乙炔烷的合成^[1],1973年有人用炔化钙和二甲基二氯硅烷在熔融盐中反应,结果得到四环体物(Me₂SiC≡C)₄^[2]。为了研究这类聚合物的性能,我们采用了新的合成路线合成可熔的聚硅乙炔烷。乙炔和格氏试剂发生交换反应,生成炔基双格氏试剂,它和有机二氯硅烷发生缩聚反应,生成聚硅乙炔烷。     

聚氯乙烯-丙烯酸丁酯接枝共聚物的结构表征

以通用聚氯乙烯(PVC)和脱氯化氢PVC树脂为基体,采用悬浮溶胀接枝共聚法合成聚氯乙烯-丙烯酸丁酯接枝共聚物,对脱氯化氢PVC和接枝共聚物的结构进行了表征.结果表明,以碱液为介质加热PVC能脱除少量氯化氢,得到以链节数为2,3,4的共轭双键为主的不饱和结构,而树脂的分子量变化不大;在相同接枝反应条件下,采用脱氯化氢PVC与丙烯酸丁酯接枝共聚可以提高接枝率和接枝效率;PVC接枝共聚物的特性粘度随接枝率增加而增加,其重均分子量和分子量分布指数均大于接枝所用的PVC树脂.     

Synthesis and Characterization of Poly(isoprene-b-butyl methacrylate) Block Copolymer in the Presence of Rare Earth Catalyst

ＩｎｔｒｏｄｕｃｔｉｏｎＢｌｏｃｋｃｏｐｏｌｙｍｅｒｉｚａｔｉｏｎｓｏｆｏｌｅｆｉｎｗｉｔｈａｃｒｙｌａｔｅｓｈａｖｅａｒｏｕｓｅｄｍｏｒｅａｎｄｍｏｒｅａｔｅｎｔｉｏｎｓｓｉｎｃｅｔｈｅｓｅｐｒｏｃｅｓｓｅｓｅｎｄｏｗｐｏｌｙｍｅｒｉｃｍａｔｅｒｉ...     

PVB存在下PVC化学法脱氯化氢的研究

ＰＶＢ存在下ＰＶＣ化学法脱氯化氢的研究刘恒＊李大成陈朝珍（四川联合大学化工学院成都６１００６５）关键词聚氯乙烯，脱氯化氢，聚乙烯醇缩丁醛１９９６－０９－０８收稿，１９９７－０５－２６修回国家教育委员会留学归国人员资助费资助课题近年来在ＰＶＣ脱氯化氢制...     

聚酰亚胺/聚醚刚柔嵌段共聚物的制备及其性能

以端氨基聚醚(D2000)、4,4′-二氨基二苯醚(ODA)、3,4,3′,4′-二苯醚四甲酸二酐(OPDA)为原料,合成了一系列不同硬段含量的聚酰亚胺/聚醚刚柔嵌段共聚物.通过红外光谱(FT-IR)、氢核磁共振谱(<'1H-NMR)和热失重(TGA)证实了这些共聚物的化学组成.结果显示:随着嵌段共聚物中硬段含量增加,嵌段共聚物的起始分解温度增加.原子力显微镜(AFM)扫描图像显示:该嵌段共聚物在云母片表面发生相分离,在不同浓度下组装成不同的线团状、坑状和颗粒状图形.     

可溶性聚(2-甲氧基-5-辛氧基)对苯乙炔的合成及其导电和三阶非线性光学性能

聚对苯乙炔;电导率;三阶非线性极化率;简并四波混频;可溶性聚(2-甲氧基-5-辛氧基)对苯乙炔的合成及其导电和三阶非线性光学性能     

Synthesis of Soluble Poly(Divinylbenzene) Through Anionic Polymerizatio

Lithium diisopropylamide (LDA), in the presence of diisopropylamine (DPA), initiates the polymerization of 1,4-, or 1,3-divinylbenzene (DVB) to form a soluble poly(divinylbenzene). Initiation was confirmed to take place by addition of an alkylamino group to the DVB molecule. The population of the triad tacticity of the soluble poly(DVB) suggests the steric course of the polymerization reaction to proceed according to Bernoullian statistics with respect to the diad placements, m and r. The chain-transfer reaction was found to take place through proton transfer from DPA to the growing chain end. A kinetic study of the reaction between lithium alkylamide and poly(DVB) was carried out for comparison with some other styrene derivatives. The second-order rate constant (k) of the reaction between lithium diethylamide and the vinyl group of poly(DVB) was 1.19 × 10^?3 L·mol^?1 ·s^?1, which is only about one-fiftieth of that for 1,4-DVB. LDA was found to metalate the methyl group of 4-methylstyrene to form 4-vinylbenzyllithium without any side reaction. This carbanion has the structure of 10π-conjugation and is stable in the reaction system for more than 30 min. The vinylbenzyl anion is regarded as a model for the growing end of poly(DVB). On the basis of these results, the reason for formation of soluble poly(DVB) in the LDA-induced DVB polymerization is summarized as follows: (i) Relatively short life time of the growing carbanion owing to chain transfer by DPA; (ii) lower reactivity of the pendent vinyl groups of the soluble poly(DVB) compared with those of DVB monomer; and (iii) lowered reactivity of the growing carbanion, which has a stabilized 10π-conjugation.