Modélisation d'un échangeur de chaleur compact à courants croisés séparés par des couches de matériau à changement de phase

A mathematical model was developed to predict the thermal behaviour of a crossflow compact heat exchanger with layers of phase change material (PCM) operating under winter conditions. The model is validated and a parametric study is conducted to determine the design and operating conditions that promote condensation and may lead eventually to the frosting of the exchanger. The transient and steady-state thermal efficiency of the exchanger are also predicted as a function of the number of thermal units NTU_f, of the ratio of the products of the mass flow rate by the heat capacity on the cold and hot sides C and of the Biot number Bi. Results indicate that for Bi = 0.6 (which corresponds to a 3 mm thick PCM layer), condensation occurs when NTU_f ≥ 2.0 for C = 1.0 and when NTU_f ≥ 5.0 for C = 0.5. If the thickness of the PCM layer increases, condensation is avoided and the duration of the heat recovery period is prolonged. At the same time however, the steady state thermal efficiency diminishes. A heat exchanger for which Bi = 0.6, C = 0.5 and NTU_f = 4.0 appears to be a good compromise for acceptable heat recovery and efficiency. In this case, the heat recovery period lasts 1.6 h and the steady state thermal efficiency levels off at 64 %.     

Dynamique non-linéaire d'instabilités de surface : gouttes et colonnes liquides formées par ruissellement de films

The destabilization of a thin film by gravity is of central importance in many industrial devices, especially those involved in Thermics (film boiling, heat exchangers). In the simplest case of a liquid film hanging below a solid ceiling, spatial structures are forced by the destabilizing action of gravity (Rayleigh-Taylor instability): one observes regular lattices of pendant drops, that in turn become instable by coalescences and falling of the drops. When the film is supplied with liquid at a constant rate, other flow regimes are observed: periodic emission of drops, formation of regular arrays of liquid columns, liquid sheet. Liquid columns exhibit a collective dynamics that is typical of non-linear systems: modulations of their spatial periodicity, diffusion of the perturbations, self-sustained oscillations, propagation of solitary dilation waves, coalescences and nucleations of the columns, etc.     

Identification des propriétés thermiques de composites fibres de verre/résines thermodurcissables: Application à l'optimisation des procédés de moulage

Identification of glass fiber/thermosetting resins composites thermal properties. Application to the optimization of molding processes. A procedure has been developed to optimize molding processes of thermosetting composite materials. Three stages have been distinguished. In the first one, some thermal and kinetic properties have been measured by differential scanning calorimetry. Thermal conductivities have been identified afterwards in thick instrumented pieces, placed in a thermally regulated press. High dependences of thermal conductivities on temperature and transformation degree have been shown. Secondly, coupled heat transfers have been numerically simulated and results have been satisfactorily compared with experimental thermograms. Finally, optimization technics based on effective inverse methods have been used.These points have been illustrated with two examples : glass fiber/epoxy resin and glass fiber/polyester. Sufficient mechanical characteristics of the first one, which is cured in oven, and good surface aspect of the second, that is made by injection in heated and closed molds, had to be obtained. The results let foresee real improvement of the corresponding molding processes.     

Facteur de bruit d'une chaı̂ne de cinématographie ultrarapide : application à la fusion par confinement inertiel

Inertial confinement fusion simulates in a laboratory the thermodynamic state of the center of stars, thus leading to the determination of stellar parameters. In order to reach that aim, high-speed cinematography brings up instruments specifically adapted to picosecond measurement, for which it is necessary to know the final precision. A model of the noise factor of the instruments under study is introduced and confronted to the experimental results obtained.     

Ventilation naturelle d'un local par une grande ouverture extérieure : Calcul à l'aide d'un code de champ

This paper is dedicated to the numerical study of natural ventilation in a room through a large external opening using the CFD code Fluent. Bidimensional numerical simulations are performed for wind speeds up to 5.55 m·s⁻¹ (20 km·h⁻¹). We propose a two-step solution procedure with grid refinement. When combined with appropriate thermal boundary conditions, this technique appears very efficient at limiting local convergence problems. Through an analysis of the flow pattern in the cavity, we qualitatively explain those results and define a critical Archimedes number. Calculated air change rates are compared to values deduced from empirical correlations of the literature. Agreement is in general poor, which can be explained by the differences between the conditions of our simulations and those of the experiments that lead to those correlations. However, from our simulations, we derived very clear correlations between the air change coefficient and the Archimedes number. In the last part, our results are compared with published data from two experiments. Agreement, in terms of air change coefficient, is within 26 % on average with the Porto test cell data which is closest to our numerical conditions. One should be careful about the transposition of our results to different ventilation scenarios.     

Theorie statistique des alliages metalliques binaires liquides a l'aide d'une methode de groupes de sites—Analyse de l'ordre local: II. Application a des alliages présentant une courbe d'enthalpie libre de mélange dissymétrique par rapport à la concentration

The model proposed in the preceding article is modified as to explain the non-symmetry of the enthalpy of mixing. Studied alloys are supposed to be compound-forming alloys so that the local order is modified. The structure of the compound is assumed to be A₃B.     

Etude théorique du spectre infra-rouge des complexes liés par liaison hydrogène à l'état gazeux: complexe ClH … O(CH3)2, son homologue deutérié et complexes voisins

Un modèle théorique est proposé en vue de reconstituer des spectres d'absorption IR des complexes du type ClH … O(CH₃)₂ en phase gazeuse. Ces complexes sont assimilés à des supermolécules triatomiques linéaires AH … B pour lesquelles la vibration v _AH et la vibration v _AH … B sont couplées par un potentiel anharmonique. Le terme couplant ces deux vibrations peut être atteint de manière précise par la connaissance de l'évolution du spectre en fonction de la température. Le modèle permet de reproduire de façon satisfaisante les spectres I.R. de ClH … O(CH₃)₂ et de ClD … O(CH₃)₂. On reproduit également mais de façon moins précise les spectres de quelques complexes voisins pour lesquels on ne possède pas de résultats en fonction de la température.