Microgel-based engineered nanostructures and their applicability with template-directed layer-by-layer polyelectrolyte assembly in protein encapsulation

A novel strategy for the fabrication of microcapsules is elaborated by employing biomacromolecules and a dissolvable template. Calcium carbonate (CaCO(3)) microparticles were used as sacrificial templates for the two-step deposition of polyelectrolyte coatings by surface controlled precipitation (SCP) followed by the layer-by-layer (LbL) adsorption technique to form capsule shells. When sodium alginate was used for inner shell assembly, template decomposition with an acid resulted in simultaneous formation of microgel-like structures due to calcium ion-induced gelation. An extraction of the calcium after further LbL treatment resulted in microcapsules filled with the biopolymer. The hollow as well as the polymer-filled polyelectrolyte capsules were characterized using confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), and scanning force microscopy (SFM). The results demonstrated multiple functionalities of the CaCO(3) core - as supporting template, porous core for increased polymer accommodation/immobilization, and as a source of shell-hardening material. The LbL treatment of the core-inner shell assembly resulted in further surface stabilization of the capsule wall and supplementation of a nanostructured diffusion barrier for encapsulated material. The polymer forming the inner shell governs the chemistry of the capsule interior and could be engineered to obtain a matrix for protein/drug encapsulation or immobilization. The outer shell could be used to precisely tune the properties of the capsule wall and exterior. [Diagram: see text] Confocal laser scanning microscopy (CLSM) image of microcapsules (insert is after treating with rhodamine 6G to stain the capsule wall).     

Layer‐by‐layer assembly of readily detachable chitosan and poly(acrylic acid) polyelectrolyte multilayer films

Free‐standing layer‐by‐layer (LbL) assembled thin films have recently found utility in a broad range of applications. Previously reported free‐standing LbL films have generally required covalent modifications to improve aqueous stability and render these films suitable for biomedical applications. Here, we engineered chitosan and poly(acrylic acid) containing polyelectrolyte multilayer films, which are readily detached from hydrophilic silicon in aqueous conditions. These films demonstrate remarkable stability over 28 days in simulated in vivo conditions (pH 7.4, phosphate buffered saline at 37 °C) without the incorporation of any covalent crosslinking modifications. These films exhibit moduli (27–420 kPa) resembling that of many biological tissues including tendon, show high visible light transmittance of greater than 50%, and prevent fibronectin adsorption. The properties of this new detachable LbL film architecture indicate its promise for use in a variety of applications, particularly in medicine and biotechnology. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 127–131     

Self‐(Un)rolling Biopolymer Microstructures: Rings,Tubules, and Helical Tubules from the Same Material

We have demonstrated the facile formation of reversible and fast self‐rolling biopolymer microstructures from sandwiched active–passive, silk‐on‐silk materials. Both experimental and modeling results confirmed that the shape of individual sheets effectively controls biaxial stresses within these sheets, which can self‐roll into distinct 3D structures including microscopic rings, tubules, and helical tubules. This is a unique example of tailoring self‐rolled 3D geometries through shape design without changing the inner morphology of active bimorph biomaterials. In contrast to traditional organic‐soluble synthetic materials, we utilized a biocompatible and biodegradable biopolymer that underwent a facile aqueous layer‐by‐layer (LbL) assembly process for the fabrication of 2D films. The resulting films can undergo reversible pH‐triggered rolling/unrolling, with a variety of 3D structures forming from biopolymer structures that have identical morphology and composition.     

Poly(ethyleneimine) microcapsules: glutaraldehyde‐mediated assembly and the influence of molecular weight on their properties

Poly(ethyleneimine) (PEI) microcapsules were prepared via the method of glutaraldehyde (GA)‐mediated covalent layer‐by‐layer (LbL) assembly, which utilized GA to cross‐link the adsorbed PEI layer and to introduce free aldehyde group on the surface for the next PEI adsorption on MnCO₃ microparticles, followed by core removal. Evidenced by ellipsometry, the PEI multilayers grew nearly linearly along with the layer number and their thickness was controlled at the nanometer scale. The hollow structure, morphology, and wall thickness were characterized by scanning electron microscopy (SEM), scanning force microscopy (SFM), and confocal laser scanning microscopy (CLSM), revealing that the capsule structure as well as the cut‐off molecular weight of the capsule wall could be tuned by the molecular weight of PEI. This offers a general and novel pathway to fabricate single component capsules with pre‐designed structure (size, shape, and wall thickness) and properties. Copyright © 2007 John Wiley & Sons, Ltd.     

Nanoencapsulation of stem cells within polyelectrolyte multilayer shells

Mouse mesenchymal stem cells have been individually encased by polyelectrolyte layers of poly (L-lysine) and hyaluronic acid using the electrostatic layer-by-layer assembly technique, resulting in a shell consisting of nanolayers of thickness around 6-9 nm. Maintenance of cell morphology and viability were demonstrated for up to one week. Further adjustments to shell permeability and flexibility will facilitate the use of these encapsulated cells in tissue engineering and targeted-delivery applications.     

Microfluidics as A Tool to Understand the Build‐Up Mechanism of Exponential‐Like Growing Films

Microfluidics is used here for the first time to efficiently tune the growth conditions for understanding the build‐up mechanism of exponentially growing polyelectrolyte (PE) films. The velocity of PE supply and time of interaction can be successfully altered during the layer‐by‐layer assembly. Another advantage of this method is that the deposition of poly‐L ‐lysine/hyaluronic acid (PLL/HA) films in microchannels can be monitored online by fluorescence microscopy. The study demonstrates that PE mass transport to the film surface and diffusion in the film are key parameters affecting PLL/HA film build‐up. Increase of PE supply rate results in a change in the “transition” (exponential‐to‐linear growth) towards higher number of deposition steps, thus indicating a mass transport‐mediated growth mechanism.     

Layer‐by‐layer ionomer films made from poly(styrene‐co‐styrenesulfonic acid) and poly(methyl methacrylate‐co‐4‐vinylpyridine) in tetrahydrofuran

Thin films were fabricated layer‐by‐layer (LbL) via ionic bonds formed between a cationic ionomer and an anionic ionomer, which were produced via proton transfer from poly(styrene‐co‐styrenesulfonic acid) to poly(methyl methacrylate‐co‐4‐vinylpyridine) in an organic solvent, tetrahydrofuran. Ionic contents of the ionomers were very low down to 5.6 mol %, much lower than usual polyelectrolytes. The build up of the LbL films was demonstrated by UV/vis spectroscopy: the absorbance of the phenyl rings in styrene residues increased with the number of depositions (thus the number of layers). Transmission electron microscopy observation of strained thin films showed unique deformation mode, involving many bands that developed both in the parallel and perpendicular directions to the stress axis. This is quite different from the deformation modes seen for ionomer blend films and for coextruded polystyrene/poly(methyl methacrylate) multilayer tapes. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 101–105, 2012     

Influence of graphene oxide incorporation and chemical cross‐linking on structure and mechanical properties of layer‐by‐layer assembled poly(Vinyl alcohol)‐Laponite free‐standing films

Functional fillers in multilayered films provide opportunity in tailoring the mechanical properties through chemical cross‐linking. In this study, Laponite‐graphene oxide co‐dispersion was used to incorporate graphene oxide (GO) easily into polyvinyl alcohol (PVA)/Laponite layer‐by‐layer (LBL) films. The LBL films were found to be uniform and the layer thickness increased linearly with number of depositions. The process was extended to a large number of depositions to investigate the macroscopic mechanical properties of the free‐standing films. The LBL films showed remarkable improvements in mechanical properties as compared to neat PVA film. The GO‐incorporated LBL films displayed higher enhancements in the tensile strength, ductility, and toughness as compared to that of PVA/Laponite LBL films, upon chemical cross‐linking. This suggests the advantageous effects of GO incorporation. Interestingly, cross‐linking of LBL films for longer time period (>1 h) and higher temperature (～80 °C) was not found to be much beneficial. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2377–2387     

Coating electrospun chitosan nanofibers with polyelectrolyte multilayers using the polysaccharides heparin and N,N,N-trimethyl chitosan

A new method is presented for functionalizing electrospun nanofibers with GAGs and growth factors by PEM deposition. Electrospun chitosan nanofibers, spun from trifluoroacetic acid and dichloromethane, were coated with PEMs, using the polysaccharides heparin and N,N,N-trimethyl chitosan. FGF-2 was adsorbed on the PEM-coated nanofibers. Nanofiber neutralization, PEM construction, and FGF-2 adsorption were monitored using FT-IR spectroscopy and X-ray photoelectron spectroscopy. Alcian blue staining was used to confirm the presence of heparin. SEM was used to study nanofiber morphology.     

Complexing processes on the immobilized matrices of hexacyanoferrate(II) copper(II) and nitrogen-sulfur-containing ligands in thin gelatin layer

Summary Complexing processes occurring between immobilized matrices obtained from Cu(II) hexacyanoferrates(II) and solutions of various nitrogen-sulfur-containing chelating ligands in thin gelatin layers have been studied. With Cu₂[Fe(CN)₆]-matrix, the complexing process is found to proceed according to pseudo-S_N1-mechanism. The schemes of the processes in each of the above matrices are given. Examples of kinetic curves for particular systems hexacyanoferrate(II)copper(II)-ligand are presented.

---

Komplexierungsprozesse auf den immobilen Matrices von Hexacyanoferrat(II)-Kupfer(II) und N-Shaltigen Liganden in dünnen Gelatin-Schichten

Zusammenfassung Es wurden Komplexierungsprozesse auf immobilisierten Matrices, die von Cu(II)-Hexacyanoferrat(II) und Lösungen verschiedener Stickstoff-Schwefel-Liganden erhalten wurden, in dünnen Gelatin-Schichten untersucht. Mit einer Cu₂[Fe(CN)₆]-Matrix wurde festgestellt, daß der Komplexierungsprozeß nach einem Pseudo-S_N1-Mechanismus verläuft. Es werden die entsprechenden Reaktionsschemata angegeben. Beispiele für den kinetischen Verlauf für bestimmte Hexacyanoferrat(II)-Cu(II)-Ligand-Systeme werden präsentiert.

     

Complexing processes on the immobilized matrices of hexacyanoferrate(II)-nickel(II) and nitrogen-sulfur ligands in thin gelatin layer

Summary Complexing processes occurring between immobilized matrices obtained from Ni(II) hexacyanoferrates(II) and solutions of various nitrogen-sulfur-containing chelating ligands in thin gelatin layers have been studied. With Ni₂[Fe(CN)₆]-matrix, the complexing process is found to proceed according to a S _N ² -mechanism. The schemes of the processes in each of the above matrices are given. Examples of kinetic curves for particular systems hexacyanoferrate(II) nickel(II)-ligand are presented.

---

Komplexierungsprozesse auf den immobilisierten Matrices von Hexacyanoferrat(II)-Nickel(II) und Stickstoff-Schwefel-Liganden in dünnen Gelatin-Schichten

Zusammenfassung Es wurden Komplexierungsprozesse auf immobilisierten Matrices, die von Ni(II)-Hexacyanoferrat(II) und Lösungen verschiedener Stickstoff-Schwefel-Liganden erhalten wurden, in dünnen Gelatin-Schichten untersucht. Mit einer Ni₂[Fe(CN)₆]-Matrix wurde festgestellt, daß der Komplexierungsprozeß nach einem S _N ² -Mechanismus verläuft. Es werden die entsprechenden Reaktionsschemata angegeben. Beispiele für den kinetischen Verlauf für bestimmte Hexacyanoferrat(II)-Ni(II)-Ligand-Systeme werden präsentiert.

     

Electropolymerization of layer‐by‐layer precursor polymer films

The layer‐by‐layer (LbL) self‐assembly has been used to fabricate polymer thin films on any solid substrates. The multilayer polymer thin films are constructed by alternating adsorption of anionic and cationic polymers. Polyelectrolyte multilayer ultrathin films containing anionic poly[2‐(thiophen‐3‐yl)ethyl methacrylate‐co‐methacrylic acid]; P(TEM‐co‐MA) and cationic poly[4‐(9H‐carbazol‐9‐yl)‐N‐butyl‐4‐vinyl pyridium bromide]; P4VPCBZ, were fabricated. The growth of multilayer ultrathin films was followed by UV–Vis absorption spectrophotometer and surface plasmon resonance spectroscopy (SPR). The deposition of P(TEM‐co‐MA)/P4VPCBZ as multilayer self‐assembled ultrathin films regularly grow which showed linear growth of absorbance and thickness with increasing the number of layer pair. Cross‐linking of the layers was verified by cyclic voltammetry (CV), UV–Vis spectrophotometry and electrochemical surface plasmon resonance (EC‐SPR) spectroscopy with good electro‐copolymerizability. This was verified by spectroelectrochemistry. The SPR angular‐reflectivity measurement resulted in shifts to a higher reflectivity according to the change in the dielectric constant of the electropolymerized film. Copyright © 2011 John Wiley & Sons, Ltd.     

Hydrophobically modified polyelectrolyte for improved oxygen barrier in nanobrick wall multilayer thin films

The influence of attaching hydrophobic side groups to a polyelectrolyte, used for deposition of a multilayer oxygen gas barrier thin film, was investigated. Polyethyleneimine (PEI) was labeled with pyrene and deposited in “quadlayers” of PEI, poly(acrylic acid), PEI, and sodium montmorillonite clay using layer‐by‐layer assembly. Thin films made of three repeating quadlayers using unmodified PEI had much lower density (1.24 g/cm³) than pyrene‐labeled PEI‐based films (1.45 g/cm³), which is believed to be the result of greater chain coiling from the increased hydrophobicity of pendant pyrene groups. This increased density in pyrene‐labeled PEI layers allowed three quadlayers to match the oxygen transmission rate of a four quadlayer film made with unmodified PEI. This discovery provides an additional tool for tailoring the barrier behavior of clay‐based multilayer thin films that could prove useful for a variety of packaging applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1153–1156     

Spectroscopic Interrogation of Layer-by-layer Assembled Films of Conjugated Polyelectrolytes

Layer-by-layer fluorescent conjugated polyelectrolyte films have been studied. The photoluminescence of conjugate polyelectrolytes was observed to be highly tunable during this film assembly process. Efficient photoinduced electron transfer from thus prepared highly luminescent film to a natural electron-transfer protein cytochrome c has also been observed.     

Synthesis of size-controlled acid-resistant hybrid calcium carbonate microparticles as templates for fabricating "micelles-enhanced" polyelectrolyte capsules by the LBL technique

Size-controlled, low-dispersed calcium carbonate microparticles were synthesized in the presence of the amphiphilic block copolymer polystyrene-b-poly(acrylic acid) (PS-b-PAA) by modulating the concentration of block copolymer in the reactive system. This type of hybrid microparticles have acid-resistant properties. By investigating the aggregation behaviors of PS-b-PAA micelles by transmission electron microscopy (TEM), the mechanism of hybrid calcium carbonate formation illustrated that the block copolymer served not only as "pseudonuclei" for the growth of calcium carbonate nanocrystals, but also forms the supramicelle congeries, a spherical framework, as templates for calcium carbonate nanocrystal growth into hybrid CaCO(3) particles. Moreover, this pilot study shows that the hybrid microparticle is a novel candidate as a template for fabricating multilayer polyelectrolyte capsules, in which the block copolymer is retained within the capsule interior after core removal under soft conditions. This not only facilitates the encapsulation of special materials, but also provides "micelles-enhanced" polyelectrolyte capsules.     

Preparation and Cytotoxicity of Poly(Methyl Methacrylate) Nanoparticles for Drug Encapsulation

Summary: This work aimed to produce poly(methyl methacrylate) nanoparticles for use in drug encapsulation. The polymer nanoparticles were produced using miniemulsion polymerization technique. Monomer miniemulsion showed moderate stability and polymer average particle size was about 90 nm. PMMA nanoparticles were tested for toxicity in human leukemic cell strain K562 and they did not show any adverse effect on cell viability. Therefore, poly(methyl methacrylate) nanoparticles are suitable to encapsulate antitumor agents.     

Functional membranes prepared by layer‐by‐layer assembly and its metal ions adsorption property

PVDF/(PEI‐C/PAA)_n functional membranes were prepared by layer‐by‐layer (LbL) assembly, and their heavy metal ions adsorption capability was investigated. The changes in the chemical compositions of membrane surfaces were determined by X‐ray photoelectron spectroscopy (XPS). XPS results show that the surface of the PVDF membrane can be alternatively functionalized by PEI‐C and PAA. The membrane surface hydrophilicity was evaluated through water contact angle measurement. Contact angle results show that the surface hydrophilicity of the membrane surface depends on the outermost deposited layer. Morphological changes of membrane surfaces were observed by scanning electron microscopy (SEM). The water fluxes for these membranes were elevated after modification. The performances of the PVDF/(PEI‐C/PAA)_n membranes on the adsorption of copper ions (Cu²⁺) from aqueous solutions were investigated by inductively coupled plasma (ICP). The results indicate that the PVDF/(PEI‐C/PAA)_n functional membranes show high copper ions adsorption ability. Copyright © 2010 John Wiley & Sons, Ltd.     

Layered microcapsules for daunorubicin loading and release as well as in vitro and in vivo studies

Anti‐cancer drug daunorubicin (DNR) was encapsulated in preformed multilayer microcapsules and was applied in tumor treatment by in vitro cell culture and in vivo animal experiments. The microcapsules were fabricated by an alternate deposition of oppositely charged polysaccharides, i.e. chitosan and alginate onto carboxymethyl cellulose (CMC) doped CaCO₃ colloidal particles in a sequential assembly procedure, followed by crosslinking of the capsule shells with glutaraldehyde (GA) and removal of the templates by disodium ethylenediaminetetraacetic acid (EDTA). The as‐prepared microcapsules showed strong ability to induce the positively charged DNR to deposit into the microcapsule interiors. Confocal microscopy and transmission electron microscopy observed homogeneous distribution of the drug within microcapsules. The loaded DNR could be released again, following a diffusion‐controlled model at the initial stage. In vitro experiments demonstrated that the encapsulated DNR can effectively induce the apoptosis of BEL‐7402 tumor cells, as evidenced by various microscopy techniques after acridine orange (AO), Hoechst 33342, and osmium tetraoxide staining. By seeding the BEL‐7402 hepatoma cells into BALB/c/nu mice, tumors were created for the animal experiments. The results showed that the encapsulated DNR had better efficacy than that of the free drug in terms of tumor inhibition in a 4 week in vivo culture period. Copyright © 2007 John Wiley & Sons, Ltd.     

Unusual collapse of highly hydrated polyelectrolyte multilayers with the ionic strength

Highly hydrated polyelectrolyte multilayers (PEMs) were fabricated by “layer by layer” (LBL) assembly of poly (diallyl dimethyl ammonium chloride) (PDADMAC) and poly (sodium 4‐styrene sulfonate) (PSS) in 0.5 M NaCl. Both thickness and hydration of the film were determined in situ as the multilayer was assembled by means of the quartz crystal microbalance with dissipation (QCM‐D) and the Spectroscopic Ellipsometry techniques combined in a single device. For PEMs of 17 total layers in water, a final thickness of up to 300 nm and a hydration of 69% were measured. The response towards the ionic strength was then studied by means of QCM‐D. PEMs of 17 layers, with PDADMAC as last layer, shrunk dramatically and lost water when exposed to aqueous NaCl solutions of increasing concentration. Indeed, a thickness variation up to 100 nm and reduction in the 50% of the water content were observed when the PEM was exposed to 1 M NaCl. On the contrary, PEMs where PSS appears on top showed no measurable change upon the variation in the ionic strength. This brings the possibility to control the responsive character of the PEMs simply by selecting the last polyelectrolyte layer (PDADMAC or PSS) deposited. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011