P-version hybrid analytical finite element method for plate bending problems

Two sets of trial functions with different variables are constructed for the admissible space of the finite element analysis. The trial functions satisfy the equilibrium differential equation inside elements, while the deflections and rotations on the edges of the elements are approximated by the Peano hierarchical interpolation functions. Then, a generalized variational principle is applied to set up the p-version hybrid analytical finite element method for plate bending problems. The accuracy of finite element computation can be improved by increasing the order of the interpolation polynomials with fixed mesh. In the finite element formulation, to obtain the stiffness matrices and the load vectors, it is only necessary to perform quadrature over the edges of the elements. These matrices and vectors possess an embedding structure. The conformability between the elements can be controlled automatically.This work is supported by the Natural Science Foundation of China and the Aeronautical Science Foundation of China.     

Goal-oriented error estimation applied to direct solution of steady-state analysis with frequency-domain finite element method

Based on the concept of the constitutive relation error along with the residuals of both the origin and the dual problems,a goal-oriented error estimation method with extended degrees of freedom is developed.It leads to the high quality local error bounds in the problem of the direct-solution steady-state dynamic analysis with a frequency-domain finite element,which involves the enrichments with plural variable basis functions.The solution of the steady-state dynamic procedure calculates the harmonic response directly in terms of the physical degrees of freedom in the model,which uses the mass,damping,and stiffness matrices of the system.A three-dimensional finite element example is carried out to illustrate the computational procedures.     

Non-local finite element analysis of damped beams

Non-local viscoelastic beam models are used to analyse the dynamics of beams with different boundary conditions using the finite element method. Unlike local damping models the internal force of the non-local model is obtained as weighted average of state variables over a spatial domain via convolution integrals with spatial kernel functions that depend on a distance measure. In the finite element analysis, the interpolating shape functions of the element displacement field are identical to those of standard two-node beam elements. However, for non-local damping, nodes remote from the element do have an effect on the energy expressions, and hence on the damping matrix. The expressions of these direct and cross damping matrices may be obtained explicitly for some common spatial kernel functions and Euler–Bernoulli beam theory. Alternatively numerical integration may be applied to obtain solutions. Examples are given where the eigenvalues are compared to the exact solution for a pinned–pinned beam to demonstrate the convergence of the finite element method. The results for beams with other boundary conditions are used to demonstrate the versatility of the finite element technique.     

薄板弯曲问题的P型杂交解析有限元方法

本文采用两套变量构造有限元试函数空间，在单元内部要求试函数精确满足平衡微分方程，在单元边界上对位移和转角分别用Ｐｅａｎｏ升阶函数插值，然后利用广义变分原理建立了一种薄板弯曲问题的Ｐ型杂交解析有限方法，与常规有限元法相比，该方法不心进行过细的网格剖分，通过增加单元插值多项式的阶数Ｐ来提高精度，此外，该方法还具有积分计算只需在单元边界上进行、单元钢度矩阵和载荷向量具有嵌入结构、协调程度可以自动控制等优     

???????????????????????????о?

针对连续Bernoulli-Euler和Timoshenko梁单元的动态刚度矩阵,分析了在使用连续梁单元 进行结构动态特性分析中的数值问题. 基于连续梁单元的运动方程,导出了连续 Bernoulli-Euler和Timoshenko梁单元的动态刚度矩阵. 分析了影响动态刚度矩阵中双曲函 数自变量的各个独立变量及其产生的影响,并给出了初估连续梁单元合理长度的方法. 使用 单一连续Bernoulli-Euler和Timoshenko梁单元的动态刚度矩阵分别进行了悬臂梁频响曲线 的数值求解. 研究表明,在合理选择连续梁单元的长度时,大多数工程结构的动态特性分析 中都不会产生数值问题.     

A finite wavelet domain method for wave propagation analysis in thick laminated composite and sandwich plates

An efficient numerical method is developed for the simulation of three dimensional transient dynamic response in thick laminated composite and sandwich plate structures involving very high frequencies and wave numbers. The proposed method incorporates Daubechies wavelet scaling functions for the interpolation of the in-plane displacements with a Galerkin formulation. It further explores the orthonormality and compact support of wavelet scaling functions to produce near diagonal consistent mass matrices and banded stiffness matrices. Hence, an uncoupled equivalent discrete spatial dynamic system is formulated, synthesized and rapidly solved in the wavelet domain using an explicit time integration scheme. The in-plane wavelet interpolation is further combined with an efficient high order layerwise laminate plate theory, that implements Hermite cubic splines for the through-the-thickness approximation of displacement fields. Numerical results are presented on the prediction of guided waves in laminated and thick sandwich composite plates and compared with respective solutions obtained by analytical, semi-analytical and time domain spectral element models. The method yielded higher convergence rates and substantial reductions in computational effort compared to respective time domain spectral finite elements.     

不确定动力系统平稳随机响应分析

由于设计、建造以及测量等诸多不确定因素的影响,通常的有限元力学分析模型只是原型结构的一种均值近似,采用随机结构模型是更为合理的.本文应用随机矩阵模拟不确定线性动力系统有限元模型中质量阵、阻尼阵和刚度阵的随机不确定性,并进一步建立此类非参数概率系统在平稳随机外载作用下动力响应的虚拟激励高效求解算法.数值结果表明,均值有限元模型和随机矩阵模型的动力响应具有很大的差异.对于精细制造,模型的随机性是不能忽略的,本文提出的算法为此类问题求解提供了一条有效途径.     

应用分形有限元方法于外域声场计算

 应用二级分形有限元方法计算了外域声场. 用一人工边界把外域声场分为两 部分，人工边界以内使用常规有限元方法，人工边界以外的无限大区域使用分形有限元方法. 使用分形有限元方法的优点是：一方面形成几何自相似网格使得相邻层之间的单元刚度矩阵 和质量矩阵具有非常简单的关系；另一方面引用自动满足无限远辐射条件的全域插值函数把 节点自由度变换为一组广义坐标，因而计算量可以大大减少. 数值算例表明：该方法对于计 算无限大外域声场是有效的.     

Modeling Method and Application of Rational Finite Element Based on Absolute Nodal Coordinate Formulation

In multibody system dynamics, the absolute nodal coordinate formulation(ANCF)uses power functions as interpolating polynomials to describe the displacement field. It can get accurate results for flexible bodies that undergo large deformation and large rotation. However, the power functions are irrational representation which cannot describe the complex shapes precisely, especially for circular and conic sections. Different from the ANCF representation,the rational absolute nodal coordinate formulation(RANCF) utilizes rational basis functions to describe geometric shapes, which allows the accurate representation of complicated displacement and deformation in dynamics modeling. In this paper, the relationships between the rational surface and volume and the RANCF finite element are provided, and the generalized transformation matrices are established correspondingly. Using these transformation matrices, a new four-node three-dimensional RANCF plate element and a new eight-node three-dimensional RANCF solid element are proposed based on the RANCF. Numerical examples are given to demonstrate the applicability of the proposed elements. It is shown that the proposed elements can depict the geometric characteristics and structure configurations precisely, and lead to better convergence in comparison with the ANCF finite elements for the dynamic analysis of flexible bodies.     

非均质饱和多孔介质弹塑性动力分析的广义耦合扩展多尺度有限元法

针对非均质饱和多孔介质弹塑性动力问题分析提出了一种广义耦合扩展多尺度有限元方法。首先,提出了基于细尺度等效刚度阵的粗尺度单元数值基函数构造方法,并给出了构造数值基函数的一般公式,所构造的耦合数值基函数有效考虑了动力相关效应与固液之间的耦合效应。其次,针对弹塑性非线性问题迭代求解,给出了基于摄动方法的位移与孔隙压强降尺度计算修正方案。最后,针对材料的强非均质特征,利用多节点粗单元技术来提高多尺度有限元方法的计算精度。通过与基于精细网格的传统有限元分析结果对比,验证了本文所提出方法的有效性与高效性。     

Time-dependent hydroelastic analysis of cavitating propulsors

A 3-D potential-based boundary element method (BEM) is coupled with a 3-D finite element method (FEM) for the time-dependent hydroelastic analysis of cavitating propulsors. The BEM is applied to evaluate the moving cavity boundaries and fluctuating pressures, as well as the added mass and hydrodynamic damping matrices. The FEM is applied to analyze the dynamic blade deformations and stresses due to pressure fluctuations and centrifugal forces. The added mass and hydrodynamic damping matrices are superimposed onto the structural mass and damping matrices, respectively, to account for the effect of fluid–structure interaction. The problem is solved in the time-domain using an implicit time integration scheme. An overview of the formulation for both the BEM and FEM is presented, as well as the BEM/FEM coupling algorithm. Numerical and experiment validation studies are shown. The effects of fluid–structure interaction on the propeller performance are discussed.     

非网格重剖分模拟宏观裂纹体的扩展有限单元法(2:数值实现)

探讨了扩展有限单元法的具体实现过程,包括裂纹体几何结构的拓扑分析、广义节点的选取及详细的单元数值计算。并针对前文提出的扩展有限单元平衡方程的统一矩阵实现模式,提出了采用虚拟层合元的思想来处理被裂纹横贯单元的子域积分问题,自然地解决了原方法中由于特殊的位移插值场在裂纹两侧不连续造成的单元刚度阵求解困难。同时依托比较成熟的虚拟层合单元法,可以方便地考虑域内及裂纹面上分布载荷影响。此外,一、二维算例较高精度的数值结果验证了本文算法的有效性和精度。     

The dynamic stiffness matrix of the finite annular plate element

The dynamic deformation of harmonic vibration is used as the shape functions of the finite annular plate element, and sonic integration difficulties related to the Bessel’s functions are solved in this paper. Then the dynamic stiffness matrix of the finite annular plate element is established in closed form and checked by the direct stiffness method. The paper has given wide convcrage for decomposing the dynamic matrix into the power series of frequency square. By utilizing the axial symmetry of annular elements, the modes with different numbers of nodal diameters at s separately treated. Thus some terse and complete results are obtained as the foundation of structural characteristic analysis and dynamic response compulation.     

三维时间-空间混和有限元

基于分析动力学与分析结构力学在数学理论上的一致性,在有限元分析方面,同时对时间、空间坐标离散组成混和的时空有限元网格.然后利用Hamilton变分原理,取一次变分为零,导出三维混和元列式;混和元列式矩阵的对称性,保证了混和有限元保辛的性质.数值例题表明,时-空混和有限元能灵活地处理多尺度波动问题和变动边界问题.     

2D dynamic analysis of cracks and interface cracks in piezoelectric composites using the SBFEM

The dynamic stress and electric displacement intensity factors of impermeable cracks in homogeneous piezoelectric materials and interface cracks in piezoelectric bimaterials are evaluated by extending the scaled boundary finite element method (SBFEM). In this method, a piezoelectric plate is divided into polygons. Each polygon is treated as a scaled boundary finite element subdomain. Only the boundaries of the subdomains need to be discretized with line elements. The dynamic properties of a subdomain are represented by the high order stiffness and mass matrices obtained from a continued fraction solution, which is able to represent the high frequency response with only 3–4 terms per wavelength. The semi-analytical solutions model singular stress and electric displacement fields in the vicinity of crack tips accurately and efficiently. The dynamic stress and electric displacement intensity factors are evaluated directly from the scaled boundary finite element solutions. No asymptotic solution, local mesh refinement or other special treatments around a crack tip are required. Numerical examples are presented to verify the proposed technique with the analytical solutions and the results from the literature. The present results highlight the accuracy, simplicity and efficiency of the proposed technique.     

摄动有限元法在结构动力模型修改中的应用

本文将摄动理论与有限元法相结合,提出了用于小变参数结构分析的摄动有限元法(P-FEM),导出了在结构参数发生小变化的情况下,结构摄动单元矩阵的一般公式及结构的动特性随结构参数变化的二阶渐近展开式,并将这一结果运用于结构的动力模型修改中,提出了一种新的适合于工程应用的结构动力模型修改方法,把这一方法应用于实际的复杂结构动力模型修改中,获得了十分满意的结果.     

基于局部插值的结构动力模型降阶方法

提出了一种基于局部插值对大型结构有限元模型的特征值问题进行降阶的方法. 该方法通过局部插值将复杂结构的有限元模型中节点的位移用凝聚点的位移插值来表示, 从而得到用插值函数表示的简化基向量, 实现对结构广义特征值问题的降阶. 为了提高降阶模型的精度, 采用非协调元的插值函数作为局部插值函数来弱化凝聚后的结构刚度, 并且在有限元模型上进行逆迭代, 对得到的降阶后的广义特征值问题的特征值和特征向量进行改善. 为了提高模型降阶的效率, 采用规整网格包围整个结构生成均匀的凝聚点, 高效地确定了有限元模型中节点所依附的凝聚点. 最后, 对 3 个机床部件的模态分析验证了提出的简化方法的高效性和可行性.      

薄膜横向振动的有限元分析

构造了一种3节点三角形膜单元,以适用于平面薄膜横向振动的有限元分析.在给出单元形函数的基础上,根据最小势能原理建立了薄膜自由振动方程,并推导了单元刚度矩阵和单元质量矩阵.研究结果表明,单元刚度矩阵和单元质量矩阵形式简单,且自由度少;通过两个典型算例,证明3节点三角形膜单元的计算结果非常接近理论解,同时可以达到很高的精度...     

Dynamic Analysis of Large Space Structures Using Transfer Matrices and Joint Coupling Matrices

Abstract

Linear dynamic analysis of lattice structures using transfer matrices and joint coupling matrices is presented. A lattice structure is defined as a network of one-dimensional members that are connected by joints. Two examples are considered to illustrate how transfer matrices and joint coupling matrices may be used to compute natural frequencies of vibration. These two examples indicate that the transfer matrix and joint coupling matrix analysis is numerically accurate over a wide range of frequencies and becomes increasingly efficient, compared to the finite element method, as the frequency increases. Some suggestions for further improvements in computational efficiency and some comments about applicability to numerical analysis of wave propagation problems are given.     

固体中短波传播单位分解有限元法的解析积分

针对固体中短波传播数值模拟的单位分解有限元法中单元矩阵积分的被积函数的强烈振荡特性,应用直角坐标系下标准有限元形函数和单元内的波动方向知识提出了一种单元矩阵的解析积分方案。它对于平面三,六,四,八和九节点的直边单位分解有限单元是完全解析的,对于与这些单元相应的曲边单元则是半解析的。数值结果显示所提出的积分方案在计算效率上比高斯-勒让德积分有大幅度提高。