Results of carbon nanoribbons and nanotubes simulation by means of hybrid density functional method and using empirical potentials have been compared. Energy of the nanoribbons formation and their citting from graphene sheet as well as energy of the nanotubes folding from graphene and nanoribbons have been determined. The REBO force field satisfactorily reflects the result of quantum chemical simulations; however, it cannot reproduce the formation of triple bonds between the edge atoms of the nanoribbons in the armchair conformation and thus leads to underestimated stability of the latter. Energy of the nanotubes folding from the nanoribbons is linear with the nanotube diameter. 相似文献
Narrow, smooth-edged graphene nanoribbons are needed for graphene electronics to replace the current silicon technology. In their Communication on page?8041?ff., J. Wang, F. Ding, et?al. report a smart strategy for cutting single-walled carbon nanotubes (gray) into narrow graphene nanoribbons in H(2) gas (green) with a single transition-metal atom (Cu, red) as the chemical scissors. 相似文献
The development of vanadium redox flow battery is limited by the sluggish kinetics of the reaction, especially the cathodic VO2+/VO2+ redox couples. Therefore, it is vital to develop new electrocatalysts with enhanced activity to improve the battery performance. Herein, we synthesized the hydrogel precursor by a facile hydrothermal method. After the following carbonization, nitrogen‐doped reduced graphene oxide/carbon nanotube composite was obtained. By virtue of the large surface area and good conductivity, which are ensured by the unique hybrid structure, as well as the proper nitrogen doping, the as‐prepared composite presents enhanced catalytic performance toward the VO2+/VO2+ redox reaction. We also demonstrated the composite with carbon nanotube loading of 2 mg/mL exhibits the highest activity and remarkable stability in aqueous solution due to the strong synergy between reduced graphene oxide and carbon nanotubes, indicating that this composite might show promising applications in vanadium redox flow battery. 相似文献
We describe a graphene and single-walled carbon nanotube (SWCNT) composite film prepared by a blending process for use as electrodes in high energy density supercapacitors. Specific capacitances of 290.6 F g(-1) and 201.0 F g(-1) have been obtained for a single electrode in aqueous and organic electrolytes, respectively, using a more practical two-electrode testing system. In the organic electrolyte the energy density reached 62.8 Wh kg(-1) and the power density reached 58.5 kW kg(-1). The addition of single-walled carbon nanotubes raised the energy density by 23% and power density by 31% more than the graphene electrodes. The graphene/CNT electrodes exhibited an ultra-high energy density of 155.6 Wh kg(-1) in ionic liquid at room temperature. In addition, the specific capacitance increased by 29% after 1000 cycles in ionic liquid, indicating their excellent cyclicity. The SWCNTs acted as a conductive additive, spacer, and binder in the graphene/CNT supercapacitors. This work suggests that our graphene/CNT supercapacitors can be comparable to NiMH batteries in performance and are promising for applications in hybrid vehicles and electric vehicles. 相似文献
The paper investigates preparation and mechanical performances of a composite ceramic coating reinforced by graphene and multi-walled carbon nanotube. The carbon nanotube is functionalized with the carboxyl functional group (–COOH) and un-functionalized with sodium dodecyl benzene sulfonate (SDBS). The structure of the functionalized and hybrid-functionalized carbon nanotube is identified using infrared spectroscopy (FTIR analysis). The coating is brushed on the matrix and then cures under temperature lower than 250°C. The morphological and cross section features are studied by scanning electron microscopy (SEM). The distributions of hardness and fracture toughness are determined using a microhardness tester. The adhesive strength is evaluated using a universal tensile tester. The tribological properties are detected using friction wear testing machine. The experimental results show that the structure of the composite coating is compact, and both graphene and hybridtreated carbon nanotube are well dispersed. Addition of 0.2 wt % graphene and 0.2 wt % hybrid-functionalized carbon nanotube results in a prominent increase in hardness and fracture toughness. Meanwhile, the adhesive strength between the composite coating and the metallic substrate is well improved due to the high tensile strength of both graphene and carbon nanotube. Compared with pure alumina coating, the friction coefficient as well as the wear depth and width of grinding crack of the composite coating is much lower.
Partially unzipped carbon nanotubes prepared by strong oxidation and thermal expansion of carbon nanotubes were explored as an advanced catalyst support for PEM fuel cells. The unique hybrid structure of 1D nanotube and 2D double-side graphene resulted in an outstanding electrocatalytic performance. 相似文献
Single-walled carbon nanotubes (SWCNT), multi-walled carbon nanotubes (MWCNT) and graphene have been tested as carbon allotropes for the modification of carbon screen-printed electrodes (CSPEs) to simultaneously determine melatonin (MT) and serotonin (5-HT). Two groups of CSPEs, both 4 mm in diameter, were explored: The first includes commercial SWCNT, MWCNT and graphene, the second includes SWCNT, MWCNT, graphene oxide nanoribbons and reduced nanoribbons that were drop casted on the electrodes. The carbon nanomaterials enhanced the electroactive area in the following order: CSPE
Carbon nanomaterials on screen-printed electrodes: smart electrochemistry for fast, simultaneous and reliable detection of serotonin the molecule of happiness and melatonin the molecule of darkness.
Multi-layer graphene nanoribbons have been made highly water soluble (4.7 mg ml(-1)) and stable for the first time by repetitious derivatization with p-carboxyphenyldiazonium salt; similarly, single-walled carbon nanotubes (4.8 mg ml(-1)) and ultra-short carbon nanotubes (50 mg ml(-1)) can also be made highly soluble by the methodology. 相似文献
A functional graphene oxide nanoribbons/manganese dioxide composite material (MnO2-GONRs) was synthesized by hydrothermal method using graphene oxide nanoribbons (GONRs) as raw material which were formed by longitudinal unzipping of multi-walled carbon nanotubes with KMnO4 and H2SO4. The microstructure of MnO2-GONRs was characterized by SEM and FT-IR. The various factors affecting the adsorption of Th(IV) in aqueous solution such as pH, solid–liquid ratio, contact time, initial concentration and temperature were investigated by batch static adsorption experiments, and the adsorption mechanism is also discussed. The results showed that MnO2-GONRs had a good adsorption effect on Th(IV) with a maximum adsorption of 166.11 mg/g.
Nitrogen-doped bamboo-shaped carbon nanotubes (N-BCNTs) and their non-doped conventional counterparts, multiwalled carbon nanotubes (MWCNTs) were compared as polymer reinforcing additives in polyvinyl chloride (PVC) matrix. The nanotubes were synthetized by catalytic chemical vapor deposition (CCVD) method. The purity of both nanotubes was measured by thermogravimetric analysis (TGA) and found to be >91%. Further analysis on the morphology and size of the carbon nanotubes (CNTs) were performed by transmission electron microscopy (TEM). The PVC powder was impregnated with CNTs in ethanol by using tip ultrasonicator. The dispersion media was evaporated, and the CNT/PVC powder was used to produce polymer fibers. The orientation of carbon nanotubes in the PVC matrix was characterized by scanning electron microscopy (SEM), and the presence of nanotubes were confirmed in case of all PVC samples. It can be observed on the SEM images that the nanotubes are fully covered with PVC. The tensile strength of the nanotube containing samples was tested and the N-BCNT/PVC composite was found to be better in this sense, thanks to the extraordinary structure of the nanotube. In case of the N-BCNT/PVC composite the measured young modulus was 39.7% higher, while the elongation at brake decreased by 33.6% compare to the MWCNT/PVC composite. These significant differences in the mechanical properties of the composites can be explained with the stronger interaction between N-BCNTs and PVC. 相似文献
Graphene nanoribbons (GNR) were generated in ethanol solution by unzipping pyrrolidine-functionalized carbon nanotubes under mild conditions. Evaporation of the solvent resulted in regular few-layer stacks of graphene nanoribbons observed by transmission electron microscopy (TEM) and X-ray diffraction. The experimental interlayer distance (0.49–0.56 nm) was confirmed by computer modelling (0.51 nm). Computer modelling showed that the large interlayer spacing (compared with graphite) is due to the presence of the functional groups and depends on their concentration. Stacked nanoribbons were observed to redissolve upon solvent addition. This preparation method could allow the fine-tuning of the interlayer distances by controlling the number and/or the nature of the chemical groups in between the graphene layers. 相似文献
This report compares the performance of polymer and carbon nanotube-polymer composite membranes on a quartz crystal microbalance (QCM) sensor for the detection of aromatic hydrocarbons (benzene, toluene, ethylbenzene, p-xylene and naphthalene) in aqueous solutions. Several different polymers (polystyrene, polystyrene-co-butadiene, polyisobutylene and polybutadiene) and types of functionalized carbon nanotubes (multi-walled and single-walled carbon nanotubes) were investigated at varying carbon nanotube (CNT) loading levels and film thicknesses. In a majority of instances, the difference in response between membranes comprising pure polymer and membranes containing 10% (w/w) carbon nanotubes were not statistically significant. However, a notable exception is the decreasing sensitivity towards p-xylene with increasing carbon nanotube content in a polybutadiene film. This variation in sensitivity can be attributed to a change in the sorption mechanism from absorption into the polymer phase to adsorption onto the carbon nanotube sidewalls. With much thicker coatings of 10% (w/w) carbon nanotube in polybutadiene, the sensitivity towards toluene was higher compared to the pure polymer. The increased toluene sensitivity may be partially attributed to an increase in the sorption capacity of a carbon nanotube polymer composite film relative to its corresponding pure polymer film. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) measurements were performed to understand the mechanism of sorption and these studies showed that the addition of functionalized CNT to the polymer increases the absorption of certain types of hydrocarbons. This study demonstrates that carbon nanotubes can be incorporated into a polymer-coated QCM sensor and that composite films may be used to modify the QCM response and selectivity during the analysis of complex hydrocarbon mixtures. 相似文献
Density-functional calculations of the adsorption of molecular hydrogen on a planar graphene layer and on the external surface of a (4,4) carbon nanotube, undoped and doped with lithium, have been carried out. Hydrogen molecules are physisorbed on pure graphene and on the nanotube with binding energies about 80-90 meV/molecule. However, the binding energies increase to 160-180 meV/molecule for many adsorption configurations of the molecule near a Li atom in the doped systems. A charge-density analysis shows that the origin of the increase in binding energy is the electronic charge transfer from the Li atom to graphene and the nanotube. The results support and explain qualitatively the enhancement of the hydrogen storage capacity observed in some experiments of hydrogen adsorption on carbon nanotubes doped with alkali atoms. 相似文献