异硫氰酸荧光素-牛血红蛋白化学发光反应的研究

研究了在碱性介质和阳离子表面活性剂CTMAB存在下,NaClO氧化异硫氰酸荧光素-牛血红蛋白标记物的化学发光行为和化学发光反应的条件,提出了反相流动注射化学发光测定牛血红蛋白的新方法.该法测定牛血红蛋白线性范围为0.26～12.8μg/mL,检出限为0.128μg/mL.     

流动注射化学发光法测定甲氧氯普胺

在酸性条件下，甲醛对高锰酸钾氧化甲氧氯普胺的化学发光反应有很强的增敏作用，据此，建立了流动注射化学发光法测定甲氧氯普胺纳新方法。方法的线性范围为0．4-100μg/mL，检出限为0．2μg/mL，对10μg/mL的甲氧氯普胺标准溶液连续11次测定的相对标准偏差为1．8％。方法已用于药物中甲氧氯普胺含量的测定。     

毛细管电泳高频电导法测定虫草中的有效成份

建立了毛细管电泳高频电导法同时测定腺苷和虫草素的方法。实验对电泳介质的种类、浓度以及操作电压和进样时间等因素进行了优化,在4mmol／L乳酸＋10％异丙醇＋80μg／mL羟甲基纤维素钠（pH=4．0）,分离电压20．OkV的条下测定了天然虫草和人工虫草菌丝制品中的腺苷和虫草素的含量,线性范围分别为2．0μg／mL～120μg／mL和3．0μg／mL～110μg／mL,检出限分别为0．5μg／mL和1．0μg／mL。     

异硫氰酸荧光素-人血清白蛋白标记物化学发光反应的研究

采用反相流动注射分析方法,研究了异硫氰酸荧光素（FITC）－人血清白蛋白（HSA）标记物的化学发光性能和反应的最佳条件,建立了化学发光测定人血清白蛋白的新方法。体系的化学发光强度与人血清白蛋白的含量在0．08－16μg/mL内呈线性关系,方法的检出限为0．04μg/mL。讨论了蛋白质标记物化学发光性增强的原因。     

高碘酸钾氧化溴甲酚紫动力学光度法测定间苯二酚

在碱性和沸水浴条件下,微量的间苯二酚对高碘酸钾氧化溴甲酚紫褪色的反应具有显著的促进作用,据此建立了测定间苯二酚的新动力学光度法。该方法测定间苯二酚的线性范围为0．10～5．0μg／mL,检出限为0．041μg／mL,对于2．0μg／mL的间苯二酚11次测定的相对标准偏差是1．94％。方法用于皮炎宁酊及水样中间苯二酚的测定,结果满意。     

反相流动注射-化学发光法测定氨基酸

基于碱性条件，氨基酸对次氯酸钠-一鲁米诺化学发光体系的显著增敏作用，建立了反相流动注射-化学发光法测定氨基酸的新方法。该法不需对氨基酸进行衍生或转化，检出限为0．016μg/mL，采样频率为150次／h，对1μg／L的组氨酸进行连续12次平行测定，其RSD为0．9％。对氨基酸注射液样品中的氨基酸测定的回收率在98．6％～102．1％之间，并和经典的茚三酮比色法进行了对照。     

铜（III）配合物-罗丹明6G体系流动注射化学发光法测定头孢米诺钠

在酸性条件下,头孢米诺钠对铜（III）配合物-硫酸-罗丹明6G化学发光体系有强烈的增敏作用,据此建立了流动注射化学发光法定量分析头孢米诺钠方法。头孢米诺钠浓度在2．0×10^-7-6．0×10^-6g／mL范围内与化学发光强度呈良好的线性关系,相关系数r=0．99969,检出限为1．4×10^-7g／mL。对2．0×10^-7g／mL头孢米诺钠水溶液进行11次平行分析,测定结果的相对标准偏差为1．69％。利用该方法对鸡血样品和头孢米诺钠针剂中头孢米诺钠的含量进行测定,加标回收率为90．2％～102．1％。     

溴酸钾氧化中性红动力学光度法测定甲醛

在一定温度和酸性介质条件下,甲醛对溴酸钾氧化中性红的反应具有显著的催化作用,据此建立了测定甲醛的新动力学光度分析法。方法的线性范围为0．10～1．10μg／mL,检出限为0．063μg／mL,对于0．40μg/mL甲醛11次测定的相对标准偏差是1.77％。本法应用于水样及漆料中甲醛的测定,结果满意。     

火焰原子吸收光谱法连续测定香蕉中的铜铁锌锰

研究了香蕉中的金属元素的含量和火焰原子吸收光谱法在同一体系中测定香蕉中微量元素铜、铁、锌、锰的方法，考察了硝酸、过氧化氢的不同用量以及消化时间长短的影响和在同一体系中铜、铁、锌、锰的相互干扰情况。在选定条件下铜检测限为0．064μg／mL，铁为0．275μg／mL，锌为0．157μg／mL，锰为0．187μg／mL，相对标准偏差为1．9％-4．7％，回收率为92．3％-105．0％。     

DNA荧光探针—荧光素-中性红体系的研究

基于DNA对荧光素(FL)-中性红(NR)分子间荧光能量转移的抑制作用，以荧光素-中性红为荧光探针，考察该探针与DNA的结合反应，建立了准确测定DNA的新方法，在pH＝6.5条件下，hsDNA、ctDNA和smDNA的浓度与荧光素-中性红体系的荧光比值变化量Δ(Fd／Fa)成线性关系，响应线性范围分别为0．25-6．25μg／mL、0．10-5．00μg／mL、0．10-4．00μg／mL，0.025μg/mL和0．023μg／mL；分析测定了DNA合成样品，回收率91．3％-101．4％，相对标准偏差小于4．2％．     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.