Rapid and Selective Detection of Cyanide Anion by Enhanced Fluorescent Emission and Colorimetric Color Changes at Micromole Levels in Aqueous Medium

One main source of cyanide (CN⁻) exposure for mammals is through the plant consumption; thus, the sensitive and selective cyanide detection in plant tissue is a significant and urgent work. Here, a simple sensor N′‐(2,4‐dihydroxybenzylidene)naphtha[2,1‐b]furan‐2‐carbohydrazide ( Q1‐3 ) was designed and synthesized for selective and sensitive dual‐channel detection of cyanide in aqueous medium (DMSO/H₂O, 1:9, v/v). Acylhydrazone and phenolic hydroxyl groups on Q1‐3 are the recognition sites, and naphthofuran group is the signal report group. The intramolecular charge transfer between the benzene group and naphthofuran group was impeded because of the electron‐withdrawing groups (hydroxyl) on sensor Q1‐3 . Interestingly, the sensor Q1‐3 exhibited an intramolecular charge transfer absorption band at 400 nm and emission band at 500 nm, respectively, directly realizing an “OFF–ON” response after the deprotonation process induced by cyanide anions in aqueous medium (DMSO/H₂O, 1:9, v/v). Notably, this sensor was successfully applied to detect cyanide anions in food samples, which proves a very simple and selective platform for on‐site monitoring of cyanide in agriculture samples. In addition, the test strips and silica gel plates based on Q1‐3 were also fabricated, which could act as test kits and silica gel plates for convenient and efficient detection of cyanide anions.     

Novel Hydrazone‐Based Tripodal Sensors: Single Selective Colorimetric Chemosensor for Acetate in Aqueous Solution

A series of novel tripodal colorimetric anion sensors based on hydrazone CHN NH groups have been synthesized and their recognition behavior with anionic guests has been studied. In DMSO solutions, sensors 1 and 2 show colorimetric responses for F⁻, H₂PO⁻₄ and AcO⁻, while in DMSO/H₂O (9:1, V/V) solutions, sensor 1 shows single selectivity for AcO⁻. ¹H NMR titration confirms that the tripodal sensors could bind anions through the collaboration of three hydrazone groups and anions residing in the central cavity of the sensors.     

Tunability of anion binding strength based on acyl-thiourea receptors containing isatin group

Some acyl-thiourea derivatives containing isatin group were synthesized and their interactions with anions were investigated using UV–vis spectroscopy and ¹H NMR titrations in DMSO and DMSO-d₆, respectively. These compounds have a same molecular framework, functionalising with different groups lead to different anion binding strength of these receptors. Receptor 1 showed a higher binding affinity for AcO⁻ than for F⁻, due to the cooperative multiple hydrogen bond interactions of AcO⁻ with the acyl-thiourea group and N–H group in the indole unit of receptor 1. Displacing the N–H proton in the indole unit with –CH₃ group, receptor 2 showed no obviously discriminative responses for F⁻, AcO⁻ and H₂PO₄⁻ due to lack of such additional binding. In the case of receptor 3, which was functionalised with strong electron-withdrawing group, it showed selectively chromogenic response for F⁻ based on double deprotonation of the receptor in DMSO, whereas AcO⁻ and H₂PO₄⁻ induced single deprotonation only.     

The anion recognition properties of Schiff base or its reductive system based on 2,2′-bipyridine derivatives

Two novel artificial receptors, 2,2′-bipyridine derivatives containing phenol group, have been designed and synthesized. The interaction of the receptors containing Schiff base or its reductive system with biologically important anions was determined by UV–vis and ¹H NMR titration experiments. Results indicate that receptors 1 and 2 show the strong binding ability for dihydrogen phosphate (H₂PO₄⁻), fluoride (F⁻), acetate (AcO⁻) and almost no binding ability for chloride (Cl⁻), bromide (Br⁻), iodide (I⁻). At the same time, the strongest binding ability of receptor 1 for H₂PO₄⁻ among studied anions is not influenced by the existence of other anions; as well as receptor 2 for F⁻. In addition, the binding ability of receptor 1 (Schiff base system) with various anions is stronger than that of receptor 2 (the reductive Schiff base system) due to the difference of electronic effect.     

Switching-On Fluorescence by Copper (II) and Basic Anions: A Case Study with a Pyrene-Functionalized Squaramide

The new symmetric acyclic N,N’-bis(1-pyrenyl) squaramide (H₂L) functionalized with the pyrene moiety as a fluorogenic fragment has been designed and its ability to selectively detect specific anions and metals investigated. H₂L selectively binds Cl⁻ both in solution (DMSO 0.5% H₂O and MeCN) and in the solid state, and allows to selectively detect Cu²⁺ in MeCN with the formation of a 2:1 metal-receptor complex, with a green intense emission appreciable by naked eye under the UV lamp. The H₂L copper complex preserves its emission properties in the presence of Cl⁻. The addition of basic anions (OH⁻, CN⁻, and F⁻) up to 10 equivalents caused the deprotonation of the squaramide NHs and a dramatic change of the emission properties of the H₂L copper complex.     

Vitamin B6 cofactor derived chemosensor for the selective colorimetric detection of acetate anions

A novel vitamin B₆ cofactor derived anion sensor L for the selective colorimetric detection of acetate has been developed by the condensation of pyridoxal and 2-aminothiophenol. The sensor L showed a noteworthy change in the visible region of the spectrum and was detected by the ‘naked-eye’ for both acetate and fluoride anions in DMSO but selectively for acetate in DMSO/H₂O (88:12, v/v). The anion recognition ability of L was investigated by spectroscopic (UV–vis and ¹H NMR) and DFT methods.     

A selective ATP chromogenic sensor for use in an indicator displacement assay

We synthesized a dinuclear Zn²⁺ complex that is useful as a sensor for ATP in a DMSO/H₂O (1:9, v/v) solvent system via a simple indicator displacement assay (IDA). This chromogenic sensor method can be used to analyze 0.1-2.0 μM of ATP with no interference from ADP or AMP.     

α-Glycyl cation, radical, and anion (H2NCH+/·/−COOH): Generation and characterization in the gas phase

The title species are synthesized in the gas phase and their unimolecular chemistry is determined by a combination of tandem mass spectrometry methods. Dissociative electron ionization of the α-amino acids valine, leucine, isoleucine, or serine produces the α-glycyl cation, H₂NCH⁺COOH, in high yield and purity. At threshold, this ion dissociates by CO loss to form the proton-bound complex HCNH⁺OH₂ via a tight 1,4-H migration that is associated with a high reverse barrier. After collisional activation, additional channels open, most notably the formation of the complementary and structure-characteristic fragments H₂NCH^+· (ionized aminocarbene) and ⁺COOH and the elimination of OH^·. Charge reversal and neutralization–reionization of H₂NCH⁺COOH conclusively show that α-glycyl anion, H₂NCH⁻COOH, and α-glycyl radical, H₂NCH^·COOH, are stable species residing in deep potential energy wells. In the microsecond time window of the experiments, a small fraction of the α-glycyl radical decomposes by sequential elimination of H₂O and CO. The α-glycyl anions arising by charge reversal of the cation or reionization of the radical partly undergo rearrangement losses of H₂ and H₂O, direct cleavages to ⁻COOH, OH⁻, and H₂N⁻, and consecutive fragmentation of these primary product anions.     

Anion Recognition Using Novel and Colorimetric Tweezer Receptors:1,3-Phenylenedi(carbonylhydrazone) in Aqueous-organic Binary Solvents

本文设计合成了2种新型的间苯二甲酰腙类钳形受体。在DMSO和DMSO-H2O混合溶液中,通过紫外可见光谱分别考察了受体分子3a对F-, Cl-, Br-, I-, AcO-, HSO4-, H2PO4-和ClO4-的相互作用。结果表明,在DMSO溶液中,受体3a对F-,CH3COO-和H2PO4-有显著识别效果,溶液颜色由无色变为黄色,实现裸眼检测。在15%H2O-85%DMSO含水体系中,3a可高选择性识别CH3COO-。1H NMR滴定表明过量F-的加入使受体分子3a发生脱质子作用,探讨了主客体之间的作用机理。并直接用于水相中无机醋酸盐的直接显色检测。     

基于分子内电荷转移的阴离子比率荧光分子探针

设计合成了一种基于4-甲基-1-羟基二苯甲酮对硝基苯腙的比色和比率荧光阴离子受体1。此类受体以羟基和腙单元为识别位点,以硝基苯基为信号报告基团。向受体1的DMSO溶液中加入AcO-、H2PO4-、F-后,溶液颜色由黄色变为紫红色,而加入所研究的其它阴离子则无变化,从而实现对AcO-、H2PO4-、F-这三种离子的裸眼识别。利用紫外-可见吸收光谱、荧光光谱考察了其与AcO-,H2PO4-,F-,Cl-,Br-,I-等阴离子的识别作用。1H NMR滴定为受体分子与阴离子之间氢键作用本质提供了有力证据。     

Laboratory investigations of negative ion molecule reactions of formic and acetic acids: implications for atmospheric measurements by ion-molecule reaction mass spectrometry

Laboratory measurements of gas-phase ion-molecule reactions of several negative ion species with formic and acetic acid have been carried out. A flow reactor operating at a temperature of 293 ± 3 K and total gas pressures of either 3 or 9 hPa was used. The negative reagent ion species investigated included OH⁻, O₂⁻, O₃⁻, CO₄⁻, CO₃⁻, CO₃⁻H₂O, HCO₃⁻H₂O, NO₃⁻, NO₃⁻H₂O, NO₂⁻, and NO₂⁻H₂O. The reactions were found to proceed either via proton transfer or clustering. Our measurements of ion-molecule reactions of negative ions with gaseous formic and acetic acids provide a firm base for quantitative detection of these acidic trace gases in the atmosphere by negative ion ion-molecule reaction mass spectrometry.     

A novel anthracene-based receptor: Highly sensitive fluorescent and colorimetric receptor for fluoride

A new highly sensitive colorimetric receptor 1 for fluoride based on anthracene-9,10-dicarbaldehyde bis-p-nitrophenylhydrazone was designed, synthesized and characterized. Experiments showed that the receptor 1 can selectively recognize the fluoride in DMSO and even in 95/5 DMSO/H₂O (v/v) mixtures. The ability of recognition and the bond between receptor 1 and anions were determined using visual inspection, UV-vis and fluorescence analyses. In addition, ¹H NMR experiments were carried out to explore the nature of interaction between receptor 1 and fluoride. Finally, analytical application and detection of fluoride in toothpaste have been studied.     

A highly selective fluorescent sensor for fluoride anion based on pyrazole derivative: Naked eye “no–yes” detection

A new pyrazole-based fluorescent sensor, 5-amino-3-(5-phenyl-1H-pyrrol-2-yl)-1H-pyrazole-4-carboxamide (compound 1), was studied for fluoride anion (F^?) detection in organic or water-containing solution. This compound displayed both changes in UV–vis absorption and fluorescence emission spectra upon addition of F^?. With increasing of F^?, blue emission intensity increases drastically and reaches saturation with 607-fold enhancement at 424 nm. The results indicate that compound 1 has highly selectivity for fluoride detection over other anions, such as Cl^?, Br^?, I^?, HSO₄^?, H₂PO₄^? and AcO^? in DMSO or aqueous DMSO solutions. ¹H NMR titration and other experiments confirm that the sensing process is mainly from the deprotonation of the pyrazole–NH in compound 1.     

Synthesis and conductivity of undecatungstotitanotitanic heteropoly acid

The undecatungstotitanotitanic heteropoly acid H₄[Ti(H₂O)TiW₁₁O₃₉] 7H₂O was synthesized for the first time by the stepwise acidification and the stepwise addition of solutions of the component elements as well as the ion exchanging-cooling method. The optimal proportion of the component compounds and the pH of the synthesis reaction are given. The product was characterized by means of inductively coupled plasma (ICP), i.r., u.v., X-ray diffraction and thermal analysis. The i.r., u.v. and XRD indicate that H₄[Ti(H₂O)TiW₁₁O₃₉] 7H₂O possesses the Keggin structure. The results of AC impedance measurement show that its proton conductivity is 1.39 × 10⁻³ S cm⁻¹ at room temperature (16 °C).     

[H3tren] templated iron fluorides; synthesis, crystal structures and Mössbauer studies

The hydrothermal synthesis, using tris-(2-ethylamino)amine (tren) as a template, and the crystal structures of three new hybrid iron fluorides, (H₃O)₂·[H₃tren]₂·(FeF₆)₂·(FeF₅(H₂O))·2H₂O (I), [H₃tren]₂·(FeF₆)₂·(FeF₂(H₂O)₄)·8H₂O (II) and [H₃tren]₂·(FeF₆)·(F)₃·H₂O (III), are reported. I, II, and III are triclinic (P-1), monoclinic (P2₁/c) and orthorhombic (I222), respectively. The structure of I is built up from isolated FeF₆ and FeF₅(H₂O) distorted octahedra separated by triprotonated [H₃tren]³⁺ cations, disordered H₃O⁺ cations and H₂O molecules. In II, Fe^IIIF₆ and neutral [Fe^IIF₂(H₂O)₄] octahedra form, together with [H₃tren]³⁺ cations, infinite (100) layers separated by extra water molecules. The structure of III consists of isolated and disordered FeF₆ octahedra, fluoride anions F⁻ connected to [H₃tren]³⁺ cations and extra fluoride anions F⁻ disordered with H₂O molecules. All [H₃tren]³⁺ cations have a “spider” type conformation. ⁵⁷Fe Mössbauer characterization shows that +III valence state can only be considered for iron cations in I and III and preliminary Mössbauer results are consistent with the presence of both +II and +III valences for iron cations in II, in agreement with the crystallographic results.     

Electrochemical study of isopoly and heteropoly anion transfer across the water | nitrobenzene interface. Part II. Vanadium-containing heteropolytungstate anions

The electrochemical transfer behaviour of vanadium-containing heteropolytungstate anions [PW_12−xV_xO₄₀]^(3+x)− (x = 1−4) across the water | nitrobenzene interface has been investigated by cyclic voltammetry and chronopotentiometry with cyclic linear current scanning. The transfer of PW₁₁V₁O⁴⁻₄₀, HPW₁₀V₂O⁴⁻₄₀, H₂PW₁₀V₂O³⁻₄₀, H₃PW₉V₃O³⁻₄₀ and H₄PW₈V₄O³⁻₄₀ across the water | nitrobenzene interface can be observed within the potential window. The effects were observed of pH in the water phase on the transfer behaviour and the formation of vanadium-containing heteropolytungstate anions in solution. Heteropolytungstate anions become more stable due to their involving the vanadium atom. The degree of protonation and the dissociation constant of the trivalent vanadium-containing heteropolytungstate anion of protonation increase with increasing vanadium content. The transfer processes are diffusion-controlled. The standard transfer potential, the standard Gibbs energy and the dissociation constant for vanadium-containing heteropolytungstate anions have been obtained and the transfer mechanisms are discussed.     

Acenaphthenequinone based simple colorimetric anion sensor with only one binding site

Quinonehydrazone compound 1 was designed to be a simple chromogenic anion sensor with one anion binding site. The sensor 1 was easily obtained in 83% yield by the condensation of acenaphthenequinone with 4-nitrophenylhydrazine in ethanol solution. In DMSO, sensor 1 could high selectively and visually detect anions with strong basicity (e.g., AcO^?, F^? and H₂PO₄ ^?) from chloride, bromide, and iodide ions with weak basicity.     

Formation of Cr(III) Hydroxides from Chrome Alum Solutions: 1. Precipitation of Active Chromium Hydroxide

The formation of active chromium hydroxide, Cr(OH)₃·3H₂O, was studied through potentiometric titrations and turbidimetric measurements. UV-Vis and IR spectroscopies were also employed to characterize the synthesized solid. The rapid addition of NaOH solution to aqueous chrome alum (KCr(SO₄)₂·12H₂O) solutions caused the immediate precipitation of the active material. Only monomeric Cr(III) species seemed to be participating in the precipitation process; neither chromium polymers nor complexes with anions (SO²⁻₄, Cl⁻, NO⁻₃, ClO⁻₄) influenced the fast formation of Cr(OH)₃·3H₂O. Titration studies allowed the determination of several hydrolysis and precipitation constants for Cr(III). Nevertheless, they cannot be used for the estimate of Cr(OH)⁰₃formation constant.     

Synthesis and Crystal Structure of [Co(H<Subscript>2</Subscript>O)<Subscript>6</Subscript>](C<Subscript>19</Subscript>H<Subscript>17</Subscript>O<Subscript>4</Subscript>SO<Subscript>3</Subscript>)<Subscript>2</Subscript>⋅8H<Subscript>2</Subscript>O

The title compound, cobalt 4′,7-diethoxylisoflavone-3′-sulfonate([Co(H₂O)₆](X)₂⋅8H₂O, X = C₁₉H₁₇O₄SO₃) was synthesized and its structure was determined by single-crystal X-ray diffraction analysis. It crystallizes in the triclinic space group P-1 with cell parameters a = 9.026(3) Å, b = 16.431(5) Å, c = 18.195(6) Å, α = 72.289(4)^∘, β = 87.498(4)^∘, γ = 82.775(5)^∘, V = 2550.1(13) Å⁻³, D_c = 1.419 Mg m⁻³, and Z = 2. The results show that the title compound consists of one cobalt cation, six coordinated water molecules, eight lattice water molecules, and two 4′,7-diethoxylisoflavone-3′-sulfonate anions, C₁₉H₁₇O₄SO⁻₃. Two anions have different conformations. Twelve H atoms of six coordinated water molecules, as donors, form hydrogen bonds with four oxygen atoms of sulfo-groups of two anions and eight oxygen atoms of eight lattice water molecules. In addition, π < eqid1 > ⋅ < eqid2 > π stacking interactions exist in the crystal structure, which together with hydrogen bonds lead to supramolecular formation with a three-dimensional network.     

Pyrrole-based tetra-amide for hydrogen pyrophosphate (HP2O73−) and F− ions in sol-gel medium

A simple pyrrole-based tetra-amide 1 shows selective fluorescence sensing of HP₂O₇^3? over a series of other anions in CH₃CN by exhibiting excimer emission at ~450 nm. In DMSO:CHCl₃ (1:5 v/v), compound 1 forms gel that undergoes disintegration to sol in the presence of basic anions such as F^?, AcO^? and H₂PO₄^?. However, the gel state of 1 under a particular condition is observed to be selective to F^? over AcO^? and H₂PO₄^? anions. The recognition properties of the receptor have been studied by fluorescence, UV–vis and ¹H NMR spectroscopic methods.