The pH dependence of dispersion of TiO2 particles in aqueous surfactant solutions

The pH dependence of dispersion of titanium dioxide (TiO₂) particles has been examined in the presence of surfactant molecules in water. Whereas particles were dispersed in water at acid and alkaline regions rather than at neutral region, the dispersion was enhanced at neutral region in an aqueous sodium dodecyl sulfate (SDS) solution and at acid and alkaline regions in an aqueous dodecyldimethylamine oxide (C₁₂DAO) solution. Considering the pH dependence of zeta potential, the adsorption models of surfactant molecules on a particle were estimated on the basis of the modes of hemimicelle and double-layer compression. While the particles that adsorbed Al³⁺ were remarkably dispersed around pH 6, their dispersion does not largely depend on pH in the addition of SDS, indicating the adsorption of SDS molecules to form double-layer compression in the whole pH region. Dynamic light-scattering measurement and electron microscopic observation suggested that the particles were dispersed in water as small flocs.     

Steric fitting of the spherical micelle size

A model was developed to explain the size of spherical micelles on the basis of steric effects. Here the electrostatic repulsion within polar heads is considered as a steric effect. The predictions of this model concerning micelle size; water penetration into the hydrocarbon micelle core; and the dependence of the aggregation number on temperature, electrolyte addition, hydrocarbon chain length, head group size, and counterion size agreed quite well with literature data.     

Characteristics of mixed bilayers of surfactants formed on alumina

The interaction between hydrocarbon and fluorocarbon surfactants on-alumina has been studied through the dispersion behavior of-alumina. When a low concentration of anionic hydrocarbon or fluorocarbon surfactant as a first additive is added to positively charged alumina, the alumina flocculates. The flocculated alumina redisperses upon addition of different surfactant from the first one by the manner that the hydrophobic parts of hydrocarbon and fluorocarbon surfactants are in contact with hydrophobic parts of the first surfactants and the hydrophilic polar groups direct out to liquid phase, resulting in the formation of mixed bilayers on the alumina. From the measurements of mean particle size, zeta potential of the alumina, and adsorbed amount of surfactants, the mixed bilayers consisting of anionic fluorocarbon-noniomc hydrocarbon surfactants and of anionic fluorocarbon-noioic hydrocarbon ones are found to be formed more preferentially than anionic hydrocarbon-anioic fluorocarbon surfactants. The property of the mixed bilayer on the alumina is also discussed using the fluorescence spectra of pyrene.     

Properties of aqueous solution of sodium glycocholate and a nonionic surfactant,and their mixtures

The micellar properties of aqueous binary mixed solutions of sodium glycocholate, NaGC, and octa-oxyethylene glycol mono-n-decyl ether, C₁₀E₈, have been studied on the basis of surface tensions, the mean aggregation number and the polarity of the interior of the micelles. The mean aggregation number, measured by steady state quenching method, decreased with the increase of the mole fraction of NaGC in the mixed system. The polarity of the interior, estimated by the ratio of first and third vibronic peak in a monomeric pyrene fluorescence emission spectrum, suggested that the hydrophobicity of intramicelles increased with the increase of the mole fraction of NaGC in the mixed system. These are considered to be caused by the differences in the chemical structure and the hydrophobic nature between NaGC and C₁₀E₈. The mean aggregation number and the polarity of the interior for each micelle near the CMC in lower total concentration of surfactants showed the tendency approaching those of pure micelle of the nonionic surfactant. This suggests that the ratio of NaGC in the initial micelles in the range of lower total concentration near the CMC is lower than that of the corresponding prepared mole fraction in the mixed system. This lower value was confirmed also from theoretical calculation of the ratio of NaGC at the CMC in the mixed micelle by regular solution treatment of Rubingh in the solution.     

Dependence of the activity of a rhizopus lipase on microemulsion composition

Enzymatic hydrolysis of a model triglyceride, palm oil, was carried out with lipase fromRhizopus sp. in microemulsions with varying water content. The microemulsions were based on a nonionic surfactant, pentaethylene glycol monododecyl ether (C12 EO5), buffered water solution and an oil component consisting of isooctane and palm oil at a weight ratio of 20:1. The structure of the microemulsions was characterized using Fourier transform pulsed-gradient spin-echo¹H NMR. The rate of reaction decreased as the water content of the reaction medium was increased. The self-diffusion coefficient of water, D_w was found to be constant within the interval 1–20% water. The difference in reactivity is believed to be due to a difference in structure of the palisade layer between water and hydrocarbon microdomains. The nonionic surfactant was demonstrated to be unsuitable for enzymatic reactions since only partial hydrolysis was obtained in all experiments. The surfactant, however, did not cause enzyme deactivation, even at very high concentrations.     

Interactions of mixed surfactant solution with liposome membrane

Interactions of the mixed surfactant solution of dodecylamido propyl dimethyl aminoacetate and sodium dodecyl sulfate with the liposomal membrane were studied. Lytic activities of the surfactants were measured as a function of the concentrations of surfactant and phospholipid and the composition of mixed surfactants. The solubilization limits of phospholipid by surfactants were determined from the change of their aggregation behavior in suspensions at equilibrium by means of quasi-elastic light scattering. The mixed surfactant solutions showed lower lytic activity than single component surfactant solution in spite of the strong adsorption onto the liposome surface. This was attributed to low solubilization power of binary mixture for phospholipid.     

Effect of pH on the binding of alkyl sulfates to gelatin

A surfactant-selective eletrode in which the membrane is an o-nitrotoluene phase containing a dissolved complex of cetyltrimethylammonium-dodecyl sulfate has been applied to investigations of the interaction between gelatin and alkyl sulfates as well as gelatin and alkyltrimethylammoniumions in dilute aqueous solutions.The binding isotherms were obtained by comparing emf-values obtained for surfactant in water to the electrode potentials in gelatin solutions plotted in terms of surfactant concentration.The binding of alkyl sulfates was measured as a function of pH at constant free surfactant concentration. At pH values 7 the degree of binding is indpendent of the pH of the solution. The level of binding of alkyl sulfates to gelatin increases strongly with increasing chain length of the alkyl sulfate. At pH values 6 the extent of binding increases steeply with decreasing pH. Octyl sulfate shows a very low level of binding even at low pH. Cationics show much weaker interactions with gelatin than anionic surfactants of comparable alkyl chain length.     

Lamellar phases in mixtures of low molecular weight alkanols and cetyltrimethylammonium bromide (CTAB)

Partial phase diagrams showing the domains of existence of a transparent, viscous, lamellar-structured (D)-phase that transforms reversibly into fluid single phase solutions at high temperature are presented for the system: cetyltrimethylammonium bromide (CTAB), two low molecular weight alcohols, and water with and without additives. At constant temperature and with a fixed amount of surfactant, the size and location of this phase in the phase diagram depends upon three composition variables: i) the ratio of concentrations of medium chain alcohol to long chain alcohol (R), ii) the ratio of concentrations of medium chain alcohol to surfactant (R), and iii) the concentrations of small amounts (up to 10 % by weight) of additives such as ethylene glycol, propylene glycol, and dimethylformamide, as well as NaBr. Small-angle x-ray scattering measurements of these mixtures reveal a lamellar structure. The observed lamellar repeat distances range from 60 A to 290 Å and depend upon the ratiosR andR and the concentration of the additives. The mechanical and structural properties of theseD-phases can be tuned by adjustingR andR. TheD-phase-to-isotropic transition temperature can be varied from near room temperature to above 80 °C by adjustingR andR.     

Adsorption of anionic surfactants on positively charged polystyrene particles II

In the case of cationic polystyrene latex, the adsorption of anionic surfactants involves a strong electrostatic interaction between both the particle and the surfactant, which may affect the conformation of the surfactant molecules adsorbed onto the latex-particle surface. The adsorption isotherms showed that adsorption takes place according to two different mechanisms. First, the initial adsorption of the anionic surfactant molecules on cationic polystyrene surface would be due to the attractive electrostatic interaction between both ionic groups, laying the alkyl-chains of surfactant molecules flat on the surface as a consequence of the hydrophobic interaction between these chains and the polystyrene particle surface, which is predominantly hydrophobic. Second, at higher surface coverage the adsorbed surfactant molecules may move into a partly vertical orientation with some head groups facing the solution. According to this second mechanism the hydrophobic interactions of hydrocarbon chains play an important role in the adsorption of surfactant molecules at high surface coverage. This would account for the very high negative mobilities obtained at surfactant concentration higher than 5×10^–7 M. Under high surface-coverage conditions, some electrophoretic mobility measurements were performed at different ionic strength. The appearance of a maximum in the mobility-ionic strength curves seems to depend upon alkyl-chain length. Also the effects of temperature and pH on mobilities of anionic surfactant-cationic latex particles have been studied. The mobility of the particles covered by alkyl-sulphonate surfactants varied with the pH in a similar manner as it does with negatively charged sulphated latex particles, which indicates that the surfactant now controls the surface charge and the hydrophobic-hydrophilic character of the surface.Dedicated to the memory of Dr. Safwan Al-Khouri IbrahimPresented at the Euchem Workshop on Adsorption of Surfactants and Macromolecules from Solution, Åbo (Turku), Finland, June 1989     

Thermodynamics of surfactant-dye complex formation in aqueous solutions. Sodium alkyl sulfates and azo oil dye systems

Thermodynamics of surfactant-dye complex formation have been studied, in terms of equilibrium coefficient, using a spectrophotometer. The systems are 6 sodium alkyl sulfates, which have different alkyl chain lengths, and 4-phenylazo-1-naphthylamine. A pronounced spectral change in the dye solution occurs on addition of the surfactant; the change has a definite isosbestic point and a new absorption band at 535 nm because of surfactant-dye complex formation, which is caused by hydrophilic-hydrophilic interaction. As the alkyl chain length in the surfactant increases, the values of free energy change (negative) increase, while the value of enthalpy change (negative) increases and the value of entropy change (positive) decreases. The longer the alkyl chain length in surfactant increase, the more stable the surfactant-dye complex becomes.Surfactant-dye complex will form due to hydrophilic-hydrophilic interaction and will become more stable due to hydrophobic-hydrophobic interaction.     

Estimation of the critical micelle concentrations and the aggregation numbers of sodium alkyl sulfates by capillary-type isotachophoresis

The analytical procedure for the separation and quantification of bulk and micellar phases for sodium alkyl sulfates has been investigated by a capillary-type isotachophoresis using a potential gradient detector. Monomer solutions were distinguished from micellar solutions at pH 5.5–6.0; hydrochloric acid — L-Histidine mixture was used as the leading electrolyte and 2-(N-Morpholino) ethanesulfonic acid as the terminating electrolyte.The potential unit value (PU value) due to the monomer solutions was larger than that due to the micellar solutions. The zone length due to monomer solutions increased with increasing concentration of surfactant until a given concentration (CMC); beyond this point the values became constant. On the other hand, the zone length due to micellar solutions increased from this point. We report an applicability of capillary-type isotachophoresis to determination of the CMC's and aggregation number for various sodium alkyl sulfates.     

The association of urethane-polyethyleneoxide (HEUR) thickeners,as studied by NMR self-diffusion measurements

The concentration and molecular weight dependence of the self-diffusion coefficient (D _self) of associative polymers of HEUR-type in aqueous solution have been investigated using FT-PGSE-NMR technique. The idea of three-dimensional network formation as a result of aggregation of the hydrophobic end-groups of the polymer in junctions is supported through the observed dramatic lowering ofD _self with increased concentration. The network-formation efficiency depends on the polymer molecular weight as well as the hydrophobicity of the end-groups.A double logarithmic dependence of the self-diffusion coefficient versus concentration (c) has been observed:D _selfc ^–a1,a2 . The first exponent,a ₁, is valid at low concentration, <1% polymer per weight solution, and ranges from 0.5 to 1, whereas the second exponent,a ₂, describing systems of higher concentration, ranges from 2 to 2.7.     

Kinetics of adsorption and desorption of sodium alkyl sulfates to and from nylon particles

The desorption rate of surfactant ions from nylon particles was investigated at the concentrations below the critical micelle concentration by applying the stopped-flow method. A mixing cell of stopped-flow spectrophotometer was modified with platinum electrodes for electric conductivity detection. The change in electric conductivity with time in the desorption process was monitored by a memory-recorder system. The surfactants used were sodium decyl, sodium dodecyl, sodium tetradecyl, and sodium hexadecyl sulfates. The desorption rate was independent of the surfactant concentration and the rate constants were obtained by applying the first-order reaction scheme. The adsorption rate constants were estimated from the experimental desorption rate constants and equilibrium constants assuming the second-order kinetics. The desorption rate constants were determined to be 1–6 sec^–1 and the adsorption rate constants to be 2–8×10⁴ mol^–1 dm³ sec^–1; the former decreased and the latter increased with increasing number of carbon atoms in alkyl chain of the surfactants.     

Strength of fibers from wholly aromatic polyesters

A theory of the strength (or the tenacity) of highly oriented Liquid Crystal Polymer (LCP) fibers was developed, and its results were compared with existing tensile strength data of fibers of a copolymer of 1,4-oxybenzoate and 6,2-oxynaphthoate. A basic premise of the theory is that the mechanical load transfer between polymer chains is through intermolecular interaction which acts in a manner similar to that of shear stress, and that the fiber strength is primarily governed by the intermolecular adhesion strength. The theory also incorporates the effects of MW, MW distribution, and the chain orientation distribution. Analysis of the experimental tenacity data demonstrates that the present theory can quantitatively describe the variation of the tenacity of LCP fibers with MW both in the as-spun and in the heat-treated states. The theory further predicts that the predominant factor governing the tenacity of LCP fibers is primarily due to MW increase due to solid-state polymerization. It is also demonstrated that the intermolecular adhesion between LCP chains is relatively weak and does not improve with heat treatment. The absence of factors that limit the MW increase (i.e, imbalanced end-groups and side reactions of end groups) is a prerequisite for fast heat treatment of a LCP fiber to a high tenacity.Symbols A _f the cross-sectional area of a single polymer chain - E _f the theoretical modulus of a polymer chain - G _m the shear modulus of fiber - h(l) the chain length distribution function - l the chain length - l the number average chain length - l _c the length of chain units that are bonded to adjacent polymer chains - n ² 4G _m/CE_f - N _c the number of polymer chains per unit area perpendicular to the fiber axis - P _b the probability that a chain does not have a chain end in the fracture zone - P _e the probability that a chain has, at least, a chain end in the fracture zone - q _e,q _b the probability of finding an ending and a bridging polymer chain, respectively, in the fracture zone - l the length of fracture zone - the elongation of a polymer chain - the chain orientation angle - _f the normal stress that acts on a polymer chain - _fu the fiber tenacity - _e the shear stress that acts on a polymer chain surface Dedicated to Prof. Dr. rer. nat. Wolfgang Hilger, Chairman of Hoechst A.G. in honor of his 60th birthday     

Ringing gels: Their structure and macroscopic properties

The phase diagram of the ternary surfactant system which consists of dimethyltetradecylaminoxide, hydrocarbon, and water contains a highly elastic gel phase which borders on the micellarL ₁-phase. This gel phase is transparent, optically isotropic, and shows the ringing phenomena when it is excited to mechanical vibrations. From SANS and light-scattering measurements it is shown that this phase consists of the same spherical microemulsion droplets which are present in the adjacent micellar solution. Even in the micellar solution the droplets are fairly monodisperse and in the SANS scattering functions a second scattering maximum was observed. Both the light scattering and SANS data can be described quantitatively on the basis of hard sphere interactions between the particles. Furthermore, it is shown that elasticity and shear modulus of the gel phase, which were determined experimentally, correlate with the compressibility modulus as calculated from the scattering data. The elasticity modulus and hence the osmotic compressibility modulus are related to the Laplace pressure inside the globules. For the calculation of this pressure it is possible to take the interfacial tension, which is obtained from a dilute micellar solution against the hydrocarbon which is used for the system. The radius of the particles and the hydrocarbon content in the system can be increased when some of the dimethyltetradecylaminoxide is replaced by dimethyltetradecylphosphinoxide.     

Adsorption of quaternary ammonium chlorides with various hydrocarbon chain lengths to glass

Contact angles, measured with various liquids, have been employed to calculate the surface free energies of glass after adsorption of quaternary ammonium chlorides with a variable hydrocarbon chain length 8n16. The thickness of the adsorbed layers has been determined ellipsometrically. A clear relation is observed between the measured parameters and the hydrocarbon chain lengthn, if only the extremesn=8 andn=16 are considered. Surface free energies decrease from 138 erg.cm^–2 for clean glass to 101 and 64 erg.cm^–2 forn=8 andn=16, respectively, at the highest concentration tested (7.5 mM). The adsorbed layer thickness of C₈ amounts to approximately 50 % of the thickness observed for C₁₆. No clear relation between the measured parameters is observed for the intermediate hydrocarbon chain lengths, which presumably reflects the many configurations possible in these adsorbed layers. It is envisaged that adsorption of C₈ as well as C₁₆ is restricted to a monolayer, which is completed at approximately 2 mM. In the case of C₈ electrostatic repulsion between the polar headgroups will inhibit further adsorption, whereas in the case of C₁₆ the van der Waals attraction from the adsorbed layer and the glass will probably not be sufficient to stimulate further adsorption.     

Solubilization properties of aqueous solutions of alkyltrimethylammonium halides toward a water-insoluble dye

The solubility of a water-insoluble dye, Sudan Red B, in aqueous sodium halide solutions of tetradecyl-, cetyl-, and stearyltrimethylammonium halides has been measured at different surfactant and salt concentrations, and the dependence of solubilization properties on alkyl chain length has been discussed with reference to the micelle size and shape. At low ionic strengths where only spherical micelles exist, the solubilization power of micellar surfactant slightly increases with increasing the ionic strength, but it sharply increases at high ionic strengths above the threshold value of sphere-rod transition. However, the solubilization power becomes independent of the ionic strength, if their rodlike micelles are sufficiently long. The solubilization capacity increases linearly with increasing the molecular weight, almost independent of counterion species, but the rod-like micelle has a higher solubilization capacity than the spherical micelle. The solubilization capacity is larger for a surfactant with longer alkyl chain, indicating that the dye is solubilized more readily in a larger hydrophobic core. The solubilized dye is situated in a rodlike micelle of alkyltrimethylammonium halides, on average, 4.5–7.5 nm apart from each other.     

The behaviour of drag-reducing cationic surfactant solutions

The behaviour of two types of drag reducing surfactant solutions was studied in turbulent flows in pipes of different diameters. Our surfactant systems contained rod-like micelles; they consisted of equimolar mixtures ofn-tetradecyltrimethylammonium bromide,n-hexadecyltrimethylammonium bromide, and sodium salicylate. The structure of the turbulence was studied using a laser-Doppler anemometer in a 50 mm pipe. In the turbulent flow regime both surfactant solutions exhibited characteristic flow regimes. These flow regimes can be influenced by changing the amount of excess salt, the surfactant concentration, or the temperature. Shear viscosity measurements in laminar pipe and Couette flows show the occurrence of the so-called shear-induced state, where the viscosity increases and the surfactant solution becomes viscoelastic. The shape of the turbulent velocity profile depends on the flow regime. In the turbulent flow regime at low Reynolds numbers, velocity profiles similar to those observed for dilute polymer solutions are found, whereas at maximum drag reduction conditions more S-shaped profiles that show deviations from a logarithmic profile occur. An attempt is made to explain the drag reduction by rod-like micelles by combining the results of the rheological and the turbulence structure measurements.     

Physicochemical properties of α, ω-type bolaform surfactant in aqueous solution. Eicosane-1,20-bis(triethylammonium bromide)

The physicochemical properties of the, - type (bolaform) surfactant, eicosane-1, 20-bis(triethylammonium bromide) (C₂₀Et₆), in aqueous solution have been investigated by means of surface tension, electrical conductivity, dye solubilization, and time-resolved fluorescence quenching (determination of average micelle aggregation number). Using electrical conductivity, the critical micelle concentration of C₂₀Et₆ was found to be 6.0×10^–3 mol dm^–3 and the ionization degree of C²⁰Et₆ micelle was found to be 0.42. From surface tension measurments, the molecular area of C₂₀Et₆ at the air-water interface was about twice that of normal type surfactants such as dodecyltrimethylammonium bromide (DTAB). The solubilizing power of micellar solution of C₂₀Et₆ toward Orange OT was 1.0×10^–2 mole of dye per mole of surfactant, i. e., slightly smaller than that of DTAB. The micelle aggregation number,N, was found to be 17±2 by time-resolved fluorescence quenching. C₂₀Et₆ showed a very small temperature dependence ofN, much less than for normal surfactants.     

Phase behavior and dynamic properties in mixed systems of anionic and cationic surfactants: lithium perfluorooctanesulfonate/diethanolheptadecafluoro-2-undecanolmethylammonium chloride (DEFUMAC) and lithium dodecyl sulfate/DEFUMAC aqueous mixtures

Two ternary phase diagrams of the cationic perfluorosurfactant diethanolheptadecafluoro-2-undecanolmethylammonium chloride (DEFUMAC) with an anionic perfluorosurfactant lithium perfluorooctanesulfonate (LiFOS) and an anionic hydrocarbon surfactant lithium dodecyl sulfate (LiDS) have been established at 25°C. The total surfactant concentration was less than 20wt%. In a wide mixing region of the LiFOS/DEFUMAC system, a lamellar-type phase,P , was identified by its texture under a polarization microscope and by its x-ray diffraction pattern. Dispersed fragments ofP -phase are present in the dilute solutions in which one surfactant was in excess. The anisotropy of electrical conductivity, flow birefringence, dynamic light scattering, and electric briefringence demonstrate that theP fragments are disk-like with a radius of 0.7 m. The disk-likeP particles are transformed by shear into a spherical aggregate ofL above a critical shear gradient. LiDS/DEFUMAC mixed solution forms dispersed and precipitatedL in the dominant region. Radius and micropolarity of the dispersedL aggregates are decreased as the ratio of LiDS:DEFUMAC approaches 1:1. On the basis of x-ray diffraction measurement the structure of precipitatedL -phase seems to consist of monolayers.