The paradoxical thermodynamic basis for the interaction of ethylene glycol, glycine, and sarcosine chains with bovine carbonic anhydrase II: an unexpected manifestation of enthalpy/entropy compensation

This paper describes a systematic study of the thermodynamics of association of bovine carbonic anhydrase II (BCA) and para-substituted benzenesulfonamides with chains of oligoglycine, oligosarcosine, and oligoethylene glycol of lengths of one to five residues. For all three of these series of ligands, the enthalpy of binding became less favorable, and the entropy less unfavorable, as the chain length of the ligands increased. The dependence on chain length of the enthalpy was almost perfectly compensated by that of the entropy; this compensation resulted in dissociation constants that were independent of chain length for the three series of ligands. Changes in heat capacity were independent of chain length for the three series and revealed that the amount of molecular surface area buried upon protein-ligand complexation did not increase with increasing chain length. Taken together, these data refute a model in which the chains of the ligands interact hydrophobically with the surface of BCA. To explain the data, a model is proposed based on decreasing "tightness" of the protein-ligand interface as the chain length of the ligand increases. This decreasing tightness, as the chain length increases, is reflected in a less favorable enthalpy (due to fewer van der Waals contacts) and a less unfavorable entropy (due to greater mobility of the chain) of binding for ligands with long chains than for those with short chains. Thus, this study demonstrates a surprising example of enthalpy/entropy compensation in a well-defined system. Understanding this compensation is integral to the rational design of high-affinity ligands for proteins.     

Entropy and enthalpy of polyelectrolyte complexation: Langevin dynamics simulations

We report a systematic study by Langevin dynamics simulation on the energetics of complexation between two oppositely charged polyelectrolytes of same charge density in dilute solutions of a good solvent with counterions and salt ions explicitly included. The enthalpy of polyelectrolyte complexation is quantified by comparisons of the Coulomb energy before and after complexation. The entropy of polyelectrolyte complexation is determined directly from simulations and compared with that from a mean-field lattice model explicitly accounting for counterion adsorption. At weak Coulomb interaction strengths, e.g., in solvents of high dielectric constant or with weakly charged polyelectrolytes, complexation is driven by a negative enthalpy due to electrostatic attraction between two oppositely charged chains, with counterion release entropy playing only a subsidiary role. In the strong interaction regime, complexation is driven by a large counterion release entropy and opposed by a positive enthalpy change. The addition of salt reduces the enthalpy of polyelectrolyte complexation by screening electrostatic interaction at all Coulomb interaction strengths. The counterion release entropy also decreases in the presence of salt, but the reduction only becomes significant at higher Coulomb interaction strengths. More significantly, in the range of Coulomb interaction strengths appropriate for highly charged polymers in aqueous solutions, complexation enthalpy depends weakly on salt concentration and counterion release entropy exhibits a large variation as a function of salt concentration. Our study quantitatively establishes that polyelectrolyte complexation in highly charged Coulomb systems is of entropic origin.     

Free energy of adsorption of water and metal ions on the [1014] calcite surface

We calculated the free energy profiles of water and three metal ions (magnesium, calcium, and strontium) adsorbing on the [1014] calcite surface in aqueous solution. The approach uses molecular dynamics with parametrized equations to describe the interatomic forces. The potential model is able to reproduce the interactions between water and the metal ions regardless of whether they are at the mineral surface or in bulk water. The simulations predict that the free energy of adsorption of water is relatively small compared to the enthalpy of adsorption calculated in previous papers. This suggests a large change in entropy associated with the water adsorption on the surface. We also demonstrate that the free energy profile of a metal ion adsorbing on the surface correlates with the solvent density and that the rate of formation of an innersphere complex depends on overcoming a large free energy barrier, which is mainly electrostatic in nature. Furthermore, comparison among the rates of desorption of magnesium, calcium, and strontium from the calcite surface suggests that magnesium has a much lower rate of desorption due to its strong interactions with both water and the surface.     

Wettability of calcite and mica modified by different long-chain fatty acids (C18 acids)

The effect of long-chain fatty acid adsorption on the wetting states of calcite and mica powders is investigated. The selected long-chain fatty acids are saturated or unsaturated aliphatic acids (stearic acid and oleic acid, respectively) and naphthenic acids with saturated or unsaturated aromatic rings (18-cyclohexyloctadecanoic acid and 18-phenoloctadecanoic acid, respectively). The amount of irreversibly adsorbed acid is determined by thermogravimetric analysis. The affinity of water and n-decane for these samples before and after modification is deduced from their adsorption isotherm and microcalorimetry. Thermodynamic analysis of surface pressure and spreading tension are performed based on adsorption isotherms. The enthalpy versus coverage curve for water adsorption and its comparison to liquefaction enthalpy is shown to be a meaningful method for characterizing the wettability of a surface. The naphthenic acid with unsaturated aromatic ring deeply modifies the calcite to an oil-wet state. The mica powder was not as strongly modified as calcite by these acid molecules.     

Microcalorimetric studies of interactions between proteins and hydrophobic ligands in hydrophobic interaction chromatography: effects of ligand chain length, density and the amount of bound protein

Using isothermal titration calorimetry (ITC), this investigation directly measured the adsorption enthalpies of proteins on various hydrophobic adsorbents. Various amounts of butyl and octyl groups were attached onto CM-Sepharose to form C4 and C8, two types of hydrophobic adsorbents. The adsorption enthalpies of both trypsinogen and alpha-chymotrypsinogen A were measured at 4.0 M NaCl and pH 10.0, in which most ionic interaction was suppressed. The adsorption isotherms of both proteins on various adsorbents were also measured, thus allowing us to calculate the Gibbs free energy and entropy of adsorption. Experimental results indicated that the adsorption of both proteins on butyl-containing adsorbents was exothermic, while their adsorption on octyl ones was endothermic. In addition, binding of both proteins with the butyl ligand is basically an adsorption process, while binding with the octyl ligand is adsorption and partition processes. Moreover, on both butyl or octyl, the adsorption enthalpy became increasingly positive as the ligand density increased, while the adsorption entropy became more positive as the alkyl chain length or density of the adsorbent increased. In addition, ITC was used to measure protein-protein interaction. The adsorption enthalpy of both proteins increased as the amount of bound protein increased, and the enthalpy increase of trypsinogen appeared to be higher than that of alpha-chymotrypsinogen A. This observation implies that protein-protein repulsion was stronger among trypsinogen molecules in the experiments.     

Empirical Relationships Describing Energetics of Adsorption at Low Coverages on Microporous Carbons

The fundamental empirical relationships that correlate the adsorption energy with physicochemical parameters of adsorbates are discussed. Based on the experimental data of the adsorption enthalpy of different organic adsorbates on microporous activated carbons some new correlations between adsorption enthalpy and entropy at zero surface coverage and physicochemical parameters of adsorbed molecules are proposed. It is shown that they can be applied for the calculation of carbon porosity. The influence of carbon surface oxidation on its energetic heterogeneity is also discussed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Dependence of surface properties of silylated silica on the length of silane arms

Amorphous precipitated Zeosil 1165 MP silica was silylated with low grafting degrees of organosilicons bearing different alkoxy and hydrocarbon tails, like monomethoxy(dimethyl)octadecylsilane (DMODMS), monomethoxytrimethylsilane (TMMS), trimethoxymercaptopropylsilane (MPTS), and 3-octanoylthio-1-propyltriethoxysilane (NXT^?). Thermogravimetry and Elemental Analysis were used to determine the degree of silane grafting and the final number of free silanol OH groups/nm² on the modified Zeosil surface. Free energy, enthalpy and entropy of adsorption of hydrocarbon probes were determined by Inverse Gas Chromatography at infinite dilution and dispersive component, $\gamma_{s}^{d}$ , and specific interaction parameter, I ^sp , of the surface tension of the silica surface were calculated. Silylation changes the hydrophilic character of Zeosil silica to the hydrophobic one, on increasing the grafting degree and, mainly, the length of hydrocarbon tail of the silane molecule (DMODMS and NXT^?). The long hydrocarbon tails practically shield the silica particle surface and the adsorbed probes preferentially interact with them. In the case of TMMS-Zeosil the adsorbed probes practically interact with the silica surface, with loss of entropy well above that of the bare silica, while being equal the values of the enthalpy of adsorption. All the other modified silicas show loss of entropy lower than that of bare silica. Steric hindrance, played by the presence of methyl groups of TMMS, is suggested to reduce the freedom of translational and rotational movements of the adsorbed probe.     

四苯硼钠在活性炭表面吸附过程的疏水相互作用

In this paper, the adsorption characteristics of sodium tetraphenylborate(NaBPh4) on activated carbon at 298.2,303.2,308.2,313..2 and 323.2 K was studied.The results show that the adsorption isotherm of NaBPh4 on activated carbon at different temperatures could be described using Langrnuir equation. Furthermore, the standard Gibbs energy, enthalpy, entropy and hydrophobic interaction Gibbs energy for the adsorption of NaBPh4 on activated carbon were studied, and the result shows that the hydrophobic interaction of BPh4^- ion plays the most important role for the transfer of NaBPh4 from water to activated carbon surface.     

Acidic Monosaccharides become Incorporated into Calcite Single Crystals**

Carbohydrates, along with proteins and peptides, are known to represent a major class of biomacromolecules involved in calcium carbonate biomineralization. However, in spite of multiple physical and biochemical characterizations, the explicit role of saccharide macromolecules (long chains of carbohydrate molecules) in mineral deposition is not yet understood. In this study, we investigated the influence of two common acidic monosaccharides (MSs), the two simplest forms of acidic carbohydrates, namely glucuronic and galacturonic acids, on the formation of calcite crystals in vitro. We show here that the size, morphology, and microstructure of calcite crystals are altered when they are grown in the presence of these MSs. More importantly, these MSs were found to become incorporated into the calcite crystalline lattice and induce anisotropic lattice distortions, a phenomenon widely studied for other biomolecules related to CaCO₃ biomineralization, but never before reported in the case of single MSs. Changes in the calcite lattice induced by MSs incorporation were precisely determined by high-resolution synchrotron powder X-ray diffraction. We believe that the results of this research may deepen our understanding of the interaction of saccharide polymers with an inorganic host and shed light on the implications of carbohydrates for biomineralization processes.     

Adsorption of volatile organic compounds onto carbon nanotubes, carbon nanofibers, and high-surface-area graphites

The adsorption of different alkanes (linear and cyclic), aromatics, and chlorohydrocarbons onto different nonmicroporous carbons--multiwalled carbon nanotubes (CNTs), carbon nanofibers (CNFs), and high-surface-area graphites (HSAGs)--is studied in this work by inverse gas chromatography (IGC). Capacity of adsorption was derived from the isotherms of adsorption, whereas thermodynamic properties (enthalpy of adsorption, surface free energy characteristics) have been determined from chromatographic retention data. HSAGs present the highest adsorption capacity, followed by CNTs and CNFs (although CNTs present an intermediate surface area between the two HSAG studied). Among the different adsorbates tested, benzene exhibits the highest adsorption capacity, and the same trend is observed in the enthalpy of adsorption. From surface free energy data, enthalpies of adsorption of polar compounds were divided into dispersive and specific contributions. The interactions of cyclic (benzene and cyclohexane) and chlorinated compounds (trichloroethylene, tetrachloroethylene, and chloroform) with the surfaces are mainly dispersive over all the carbons tested, CNTs being the material with the highest dispersive contribution, as was deduced also from the entropy parameter. Adsorption parameters were correlated with morphological and chemical properties of the materials.     

α-氨基酸在水-乙醇中羧基质子化热力学

Enthalpy changes for the protonation of carboxyl group of four α-amino acids(glycine,L-α-alanine,L-valine and L-serine) were measured in water-ethanol mixtures (10－ 70wt％) at 298.15K using LKB-2277 Bioactivity Monitor.The corresponding entropy and Gibbs energy changes were also calculated.The results show that both enthalpy changes and entropy changes are favorable to the protonation of carboxyl groups of the investigated amino acids in water-ethanol mixtures.However,the influence of the composition of ethanol in the mixed solvents on the enthalpy change and entropy changes is complicated.Both sδ and sδ ,the differences of enthalpy changes and entropy changes in mixed solvents and in pure water respectively,show a minimum approximately at xEtOH=0.1.The effects of side chains on the enthalpy change and entropy changes were also investigated using the proton transfer process between glycine and the other three amino acids.The results demonstrate that the proton transfer processes for alanine and valine are spontaneous but not for serine,which could be interpreted in terms of the electrostatic interaction between amino group and carboxyl group within the molecule and the interaction between carboxyl group and the solvent.     

α-氨基酸在水-乙醇中羟基质子化热力学

α 氨基酸为重要的两性物质 ,其酸碱性质对于维持生物体内的酸碱平衡和蛋白质的生物活性起着十分重要的作用．α 氨基酸在纯水溶剂中的质子化反应热力学性质已进行了广泛的研究［１ -６］,但对球形蛋白来说 ,蛋白亚基间的作用是处在一个大量但不完全由水组成的非水环境中 ,因此 ,研究氨基酸在水 有机物混合溶剂中的质子化热力学性质具有重要意义．但这方面的工作 ,特别是用量热法直接研究溶剂对质子化焓变的影响开展得不多．本文选择乙醇和水组成的混合溶剂模拟蛋白质亚基所处的介质环境 ,利用精密微量流动热量计测定２９８．１５Ｋ时甘氨…     

Investigation of acid–base and surface characteristics of a thermotropic semifluorinated salicylaldimine liquid crystal by inverse gas chromatography

The surface energy of a semifluorinated salicylaldimine liquid crystal has been characterised by inverse gas chromatography over the temperature range 303 to 323 K using n-alkanes, tetrahydrofurane, dichloromethane, chloroform, acetone and ethyl acetate molecular probes. The dispersive component of the surface free energy of the adsorbent surface studied was calculated according to the approaches of Fowkes and Dorris–Gray in the infinite dilution region. The specific free energy, enthalpy and entropy of adsorption of polar probes on the liquid crystal were determined. The values of the specific enthalpy of adsorption were correlated with both the donor and the acceptor numbers of the probes to quantify the acidic and the basic parameters of the liquid crystal surface. The surface of the semifluorinated salicylaldimine liquid crystal was found to show a basic nature, which determined the nature of its interaction with the polar probes.     

Adsorption of atrazine on soils: model study

The adsorption of the widely used herbicide atrazine onto three model inorganic soil components (silica gel, gamma-alumina, and calcite (CaCO(3)) was investigated in a series of batch experiments in which the aqueous phase equilibrated with the solid, under different solution conditions. Atrazine did not show discernible adsorption on gamma-alumina (theta=25 degrees C, 3.8相似文献   

Native and hydrophobized human IGG: Enthalpies of heat-induced structural changes and adsorption onto silica

Differential scanning calorimetry (DSC) and isothermal calorimetric batch technique were used to monitor the heat-induced structural changes and adsorption properties of human immunoglobulin G (IgG), in native and hydrophobized states. The transition temperature (T _max) and enthalpy of heat-induced conformational changes (_cal H) of IgG in solution as well as the enthalpy change accompanying the adsorption of IgG onto hydrophilic silica (_ads H), were shown to depend on the degree of the protein hydrophobicity (number of covalently attached alkyl chains). The adsorption enthalpy for all forms of IgG at all surface concentrations was found to be endothermic, that is the process is entropy driven. Factors affecting the IgG adsorption onto silica are discussed.This revised version was published online in November 2005 with corrections to the Cover Date.     

β-环糊精和部分有机物分子识别作用的焓熵判断

应用气相色谱实验技术,测定了一些有机溶剂（或溶质）在β-环糊精（β-CD）固体表面上的吸附热力学函数.实验结果表明,气相中的有机物质在β-CD表面上的吸附过程之焓、熵互补现象与它们之间的分子识别作用密切相关,它们的绝对值之和可以作为分子识别作用强弱的判据.     

The inhibition of calcium carbonate crystal growth by the cysteine-rich Mdm2 peptide

The crystal growth of calcite, the most stable calcium carbonate polymorph, in the presence of the cysteine-rich Mdm2 peptide (containing 48 amino acids in the ring finger configuration), has been investigated by the constant composition technique. Crystallization took place exclusively on well-characterized calcite crystals in solutions supersaturated only with respect to this calcium carbonate salt. The kinetic results indicated a surface diffusion spiral growth mechanism. The presence of the Mdm2 peptide inhibited the crystal growth of calcite by 22-58% in the concentration range tested, through adsorption onto the active growth sites of the calcite crystal surface. The kinetic results favored a Langmuir-type adsorption model, and the value of the calculated affinity constant was k(aff)=147x10(4) dm(3)mol(-1), a(ads)=0.29.     

Solvent response of mixed polymer brushes

We have performed classical density functional theory calculations to study the behavior of mixed polymer brushes tethered to a planar surface. We assume no lateral segregation of the polymer at the grafting density studied and consider an implicit solvent. For a binary mixture of short and long athermal polymer chains, the short chain is compressed while the long chain is stretched compared with corresponding pure polymer chains at the same grafting density, which is consistent with simulation. This results from configurational entropy effects. Furthermore, we add a mean-field interaction for each polymer brush to simulate their different response towards a solvent. The long chain is forced to dislike the solvent more than the short chain. Through the interplay between the solvent effects and configurational entropy effects, a switch of the polymer brush surface (or outer) layer is found with increasing chain length of the long chain. The transition chain length (long chain) increases with increasing the solvent selectivity, and decreases with increasing the grafting density of the long chain. These results can provide guidance for the design of smart materials based on mixed polymer brushes.     

Free energy of adsorption of water and calcium on the [10 1 4] calcite surface

Molecular dynamics simulations of the calcite-water interface have shown that the free energy of adsorption of water is relatively small compared to the previously calculated enthalpy of adsorption implying a large entropy change and that the free energy profile of a calcium adsorbing on the surface correlates with the solvent density; these calculations allow us to begin to address the rates of adsorption and desorption which are essential for studying growth and dissolution.     

Fractions of thermodynamic functions for native lysozyme adsorption onto moderately hydrophobic surface

Calorimetric measurement of adsorption enthalpies of native lysozyme(Lyz) on a moderately hydrophobic surface at 25°C, pH 7.0 and various salt concentrations was performed. Based on the thermodynamics of stoichiometric displacement theory (SDT), we calculated the fractions of thermodynamic functions involving four subprocesses during a displacement adsorption process from the directly determined enthalpies in combination with adsorption isotherm measurements. The thermodynamic fractions reveal the relative degree of the four subprocesses for contributions to enthalpy, entropy and free energy. The results show that native Lyz adsorption on a moderately hydrophobic surface is an entropy driven process contributed mainly by conformational loss of adsorbed Lyz.