胺固化环氧酚醛树脂对Hg~(2+)的吸附性能

螯合树脂能与金属离子形成稳定的配合物,在无机、冶金、分析药物、催化、海洋化学、放射化学、环境保护各领域都有非常重要的应用[1-3]。我们曾以酚醛树脂为大分子骨架与多胺反应制备了一系列螯合树脂并对其结构及对多种金属离子的吸附性能进行了探讨[4,5]。本文则以线型环氧酚醛树脂为大分子骨架、多乙烯多胺为固化剂,制备了五种不同氮含量的氨基环氧酚醛螯合树脂,并考察其对金属离子Ｈｇ2+的吸附性能。1　实验部分1.1　仪器与试剂ＮｉｃｏｌｅｔＭＡＧＮＡ ＩＲ550(ＳｅｒｉｅｓＩＩ)红外分光光度计,ＳＨＡ-Ｃ水浴恒温振荡器,ＰＥ2000…     

磁性交联壳聚糖对稀土金属离子的吸附性能

用高胶乙酰度的壳聚糖包埋自制的磁流体，并用戊二醛交联制成磁性壳聚糖（MCG），考察了其对稀土离子La^3 ,Nd^3 ,Eu^3 ,Lu^3 的吸附性能。探讨了溶液的酸度，体系温度，初始离子浓度对MCG吸附性能的影响；发现MCG对稀土离子的吸经纯高脱乙酰度的壳聚糖强，最高吸附率可达到99％以上，并具有良好的重复使用性；其吸附行为满足Langmuir等温式。     

含硫弱酸性酚醛树脂对Ag+的吸附性能

含硫配位原子的螯合树脂对过渡金属离子尤其是贵金属离子具有良好的吸附性能[1]。螯合树脂的母体交联聚苯乙烯、聚甲基丙烯酸甲酯[2]具有疏水性,即使引入螯合基团其疏水性仍很强,对在水溶液中的吸附很不利。而含有酚醛骨架的螯合树脂具有亲水性[3]。本文以酚醛树脂为大分子骨架,通过化学反应连接上具有强配位原子硫的巯基羧酸,研究了该巯基弱酸性酚醛树脂对Ag+在各种条件下的吸附性能。1　实验部分1 1　仪器与试剂NicoletMAGNA550(SeriesⅡ)红外光谱仪,SHA C水浴恒温振荡器,3200原子吸收分光光度计,JSM 5600LV扫描电镜,Quest.le…     

新型假冠醚聚合物的合成与对金属离子的吸附特性

新型假冠醚聚合物的合成与对金属离子的吸附特性     

环氧功能化双功能磁性分子印迹聚合物的合成及其在多糖吸附中的应用

以淀粉为模板，以3-氨基苯硼酸（APBA）和2-丙烯酰胺-2-甲基丙磺酸（AMPS）为功能单体，以过硫酸铵（APS）为引发剂，在水溶液中成功合成了一种识别多糖的双功能分子印迹聚合物（Bi-MMIPs）。采用透射电镜、扫描电镜、傅里叶变换红外光谱等考察了Bi-MMIPs的合成效果。通过吸附试验深入研究了Bi-MMIPs对淀粉的吸附和识别特性。结果表明：Bi-MMIPs成功负载了两种功能单体，且对多糖（淀粉）具有很强的吸附亲和力和特异性识别能力，饱和吸附量达到13.88 mg/g；对于葡聚糖（M_r 5000 Da和70000 Da）的选择性系数分别为2.67和3.77；此外，Bi-MMIPs的印迹因子（α）达到了3.04，且易于再生。在机理上，APBA和AMPS分别提供可逆共价键和氢键，在合成双功能单体中表现出协同效应，可以有效改善模板分子结合位点的空间排列。     

聚乙烯醇胺肟型螯合纤维的合成及其对铜（Ⅱ）离子的吸附

本文报导通过预辐照接枝法首次合成了聚乙烯醇胺肟(PVAAO) 型螯合纤维,并且研究了影响接枝率和胺肟基因含量的因素。该纤维对铜(Ⅱ)离子的吸附容量最高达2.41毫克当量/克千纤维。     

功能化高分子磁性载体的制备及选择性吸附稀土离子

悬浮聚合法制备含四氧化三铁微粒的甲基丙烯酸羟乙酯聚合物, 再由环氧化和氨基化反应得到功能化高分子磁性载体(FPMC), 采用酸渗实验、红外光谱和X-光电子能谱(XPS)等对产物进行性能表征;研究FPMC对RE3+离子( RE=La, Eu, Y)的选择性吸附作用, 进而探讨稀土离子浓度对载体FPMC吸附效果的影响.     

胺修饰酚醛树脂对酸性橙Ⅱ的吸附性能研究

研究了自制胺修饰酚醛树脂(AMPF)对水溶性染料酸性橙II的吸附性能,探讨了pH值、温度、浓度等因素对酸性橙吸附性能的影响。结果表明,AMPF与市售大孔树脂D296和D301相似,对酸性橙均具有较强的吸附能力。温度升高有利于AMPF对酸性橙的吸附;酸性橙浓度升高,吸附量增大。AMPF对酸性橙的吸附符合Boyd液膜扩散控制。各种树脂对酸性橙的平衡吸附数据符合Langmuir方程和Freundlich等温式,其相关系数大于0.98,n均大于1,表明为优惠吸附。     

硫脲树脂的合成及其对金属离子的吸附性能

采用双(异硫氰酸甲酸)丁二酯分别与二乙烯三胺、三乙烯四胺、四乙烯五胺、多乙烯多胺单体进行加聚反应制得4种主链上含有硫脲基团的新型螯合树脂PETU-Ⅰ～PETU-Ⅳ。红外光谱分析表明,树脂中存在硫脲基团,树脂热稳定性和溶胀性能良好。用静态吸附法研究了PETU树脂对金属离子的吸附性能,4种树脂对Au(Ⅲ)的吸附容量分别为2.48、2.68、4.74和6.44mmol/g,对Ag(Ⅰ)的吸附容量分别为2.15、3.53、3.74和3.98mmol/g,对Cu(Ⅱ)、Zn(Ⅱ)等金属离子吸附容量低于0.36mmol/g;PETU-Ⅳ对Au-Cu和Au-Zn的分离因子>1000,PETU-Ⅱ对Ag-Cu和Ag-Zn的分离因子>10,说明树脂对Au(Ⅲ)、Ag(Ⅰ)具有较高的吸附容量和优良的吸附选择性。PETU-Ⅳ树脂重复使用5次,吸附容量无明显下降,说明树脂具有良好的重复利用性能。     

聚氯乙烯负载席夫碱树脂的合成及其对金属离子的吸附

聚氯乙烯负载席夫碱树脂的合成及其对金属离子的吸附刘理中，俞善信，肖立新（湖南师范大学化学系长沙４１００８１）（中南工业大学冶金化学研究所长沙）关键词聚氯乙烯，负载树脂．席夫碱，金属离子，吸附高分子负载席夫碱可用于离子吸附和催化等领域，汪信［１，２］等...     

侧链含芳香基的聚醚树脂的合成及其吸附性能研究

聚[B-氯乙基缩水甘油醚]分别和4-氨基偶氮苯,4-氨基-2”,3-二甲基偶氮苯、4-氨基-4”-氯联苯、4-羟偶基氮苯、4、4”-二氨基-3,3”二甲氧基联苯及1、3-二(4-羟基-苯基丙烷反应,合成了六种新型的聚醚树脂。它们对A_u(Ⅲ)等离子显示出较好的吸附选择性。     

Schiff碱螯合树脂的合成及其对金属离子的吸附规律

以交联聚苯乙烯为母体的大孔螯合树脂的合成及其应用已有文献报道,我们根据光亮镀镍工艺的特定要求,合成了4种对Cu²⁺具有良好吸附性能的Schiff碱大孔新型螯合树脂。     

Adsorption Behavior of Metal Ions by Amidoxime Chelating Resins

In this work, the acrylonitrile (AN) – divinylbenzene (DVB) –methylacrylate (MA) resin was synthesized via suspension polymerization in the presence of toluene as diluent, and benzoylperoxide (BPO) as initiator. The effect of MA, toluene and alkaline treatment on the exchange capacity of the resin were investigated. The results showed that the anion exchange capacity decreased with an increase in the amount of MA, while alkaline treatment had no significant effect. Also, the cation exchange capacity increased with an increase in the amount of hydrophilic agent and reached a maximum point. The sorption equilibrium was achieved relatively fast within 40 mins, and the resin exhibited affinity towards lead (II), copper (II) and in particular uranium (VI). The adsorption of uranium was directly depended up on the pH value. Furthermore, the macroreticular chelating resin, containing amidoxime group had higher adsorption of uranium (VI) in comparison to other metal ions studied. Finally, the alkaline treatment enhanced the potential for much faster adsorption characteristics and the highly porous chelating resin provided a more favorable pore structure for the rapid rate of diffusion of metal ions.     

Synthesis and Adsorption Properties of Polystyrene-supported Chelating Resins Containing Heterocyclic Functional Groups

A series of new chelating resins with incorporating heterocyclic functional groups： pyridine, thiadizole, benzothizole into macroporous chloromethylated polystyrene were synthesized via hydrophilic spacer arm of polyethylene glycol containing sulfur. These chelating resins were found to show high adsorption capacities for Ag^＋, Hg^2＋, Au^3＋ and Pd^2＋, and the presence of spacer arm can enhance adsorption ability due to increase the hydrophilicity of the chelating resins.     

壳聚糖缩合呋喃甲醛螯合树脂的合成及性能研究

利用壳聚糖C2 位上活泼氨基与呋喃甲醛缩合反应 ,合成了一种新型树脂。通过L9(34 )正交试验 ,研究了缩合反应的最佳条件 :80℃乙醇中溶胀 1h ,反应 5h ,pH =4.0～ 4.5 ,反应物配比 (氨基摩尔∶醛基摩尔 )为 1∶4,缩合率达到 90 %以上。并测定了上述螯合树脂对过渡金属离子的吸附性能。     

Organic Ion Exchangers. Synthesis and Their Behaviour in the Retention of Some Metal Ions

Summary: Three pyridine strong base anion exchangers as beads were obtained by quaternization reactions of a 4-vinylpyridine : 8% divinylbenzene copolymer of gel type. These resins possess methyl / ethyl / butyl radicals as substituents on N⁺ atoms and have exchange capacities of 4.80 mEq/g and 2.10 mEq/mL. For pyridine strong base anion exchangers, the behaviours in the retention processes of Cr(VI) as oxyanions and Ga(III) as [GaCl₄]⁻ complex anion were evaluated with the bath method. All the resins exhibited retention properties, but the retained amounts of the metal cations are different as a function of the alkyl length as substituent on N⁺ atoms and the complex anion nature. Thus, Cr(VI) oxyanions are best retained by the resin with  CH₃ as substituent on N⁺ atoms while [GaCl₄]⁻ complex anion by the resin with  C₄H₉ as substituent on N⁺ atoms. By aminolysis reaction of an ethylacrylate : acrylonitrile : divinylbenzene copolymer as beads of macroporous type with NH₂OH · HCl in the presence of C₂H₅OH a new chelating ion exchanger was performed which contains both amidoxime and hydroxamic acid functional groups. This ion exchanger has the retention property for different metal cations but its retention capacities values are strongly dependent of the nature of metal cation and the counterion as well as pH of the solution. Thus, in the static conditions Zn(II) cation with NOequation/tex2gif-stack-1.gif anion as counterion is retained with the best result at pH = 5. As an example, for the aqueous metal cation solution of 10⁻² M concentration for Zn(NO₃)₂ the resin possess at equilibrium a retention capacity of 6.70 mmol Zn/g dry resin and for Cu(II) from Cu(NO₃)₂ solution of same concentration, the retention capacity is 0.22 mmol Cu/g dry resin and Fe(III) from Fe(NO₃)₃ solution is not retained.     

Preparation of Iminoacetic Acid-type Composite Chelating Material IAA-PEI/SiO2 and Preliminary Studies on Chelating Adsorption Property towards Heavy Metal Ions

Polyamine polyethyleneimine (PEI) was first grafted on the surfaces of micro-sized silica gel particles in the manner of the coupling graft (the manner of “grafting to”), forming the grafting particles PEI/SiO₂. Subsequently, via a polymer reaction, the nucleophilic substitution reaction between the primary and secondary amino groups of the grafted PEI macromolecule and chloroactic acid (CAA), iminoacetic acid groups were bonded onto the grafted PEI chains, and an iminoacetic acid (IAA)-type composite chelating material, IAA-PEI/SiO₂, was formed. In this work, the preparation process of IAA-PEI/SiO₂ particles was mainly researched, and the effects of the main factors on the polymer reaction, i.e., the nucleophilic substitution reaction, were examined emphatically. The adsorption behavior of IAA-PEI/SiO₂ particles towards several kinds of heavy metal ions was preliminarily evaluated. The experiments results show that it is feasible to introduce IAA groups onto PEI/SiO₂ particles via the substitution reaction between CAA and the amino groups of the grafted PEI. The reaction rate is affected greatly by the feed ratio of the amino group of PEI to CAA, so the substitution reaction between CAA and the amino groups of the grafted PEI is a bimolecular nucleophilic substitution reaction (S_N2). The reaction temperature and the used amount of acid-acceptor NaHCO₃ affect the bonding rate of IAA groups greatly. The fitting temperature was 60°C, and 1:1 of the molar ratio of NaHCO₃ to CAA was an appropriate amount of acid-acceptor NaHCO₃. Under the above optimal reaction conditions and with 3:1 molar ratio of amino group of PEI to CAA, 72% of the IAA group bonding rate (it is based on the hydrogen atoms in the primary and secondary amino groups of the grafted PEI) in 8 h can be reached. The composite chelating material IAA-PEI/SiO₂ possesses a strong chelating adsorption ability for heavy metal ions because of the increase of the ligands and formation of stable five-membered chelate rings.     

改性壳聚糖的制备及其对金属离子的吸附性能

用对羟基苯甲醛、水杨醛和香草醛对壳聚糖进行了修饰.探讨了产物对微量Hg2+,Pb2+,Au3+,Cu2+,Ag+,Cr3+,Cd2+,Ni2+和Zn2+的吸附性能.结果表明,改性后的壳聚糖具有不易流失、易再生的特点,并且对离子的去除率较高,尤其对Hg2+,Pb2+和Au3+,去除率更高.