Solid state white light emitting systems based on CeF3: RE3+ nanoparticles and their composites with polymers

A series of doped CeF(3): RE(3+) (RE(3+): Tb(3+), Eu(3+) and Dy(3+)) nanoparticles were synthesized, with the aim of obtaining a white light emitting composition, by a simple polyol route at 160°C and characterized by X-ray diffraction (XRD), high resolution transmission electron microscopy (HR-TEM), Fourier transform infrared spectroscopy (FT-IR) and photoluminescence. Uniformly distributed and highly water-dispersible rectangular nanoparticles (length ~15-20 nm, breadth ~5-10 nm) were obtained. The steady state and time resolved luminescence studies confirmed efficient energy transfer from the host to activator ions. Lifetime studies revealed that optimum luminescence is observed for 2.5 mol% Dy(3+) and 7.5 mol% Tb(3+). The energy transfer efficiencies (Ce(3+) to activators) were found to be 89% for CeF(3): Tb(3+) (7.5 mol%) nanoparticles and 60% for CeF(3): Dy(3+) (2.5 mol%) nanoparticles. Different concentrations of Tb(3+), Eu(3+) and Dy(3+) were doped to achieve a white light emitting phosphor for UV-based LEDs (light emitting diodes). Finally CeF(3), triply doped with 2.0 mol%Tb(3+), 4.5 mol% Eu(3+) and 3.5 mol% Dy(3+), was found to have impressive chromaticity co-ordinates, close to broad day light. The colloidal solutions of doped CeF(3) nanoparticles emitted bright green (Tb(3+)), blue (Dy(3+)) and white (triply doped) luminescence upon host excitation. Composites of poly methyl methacrylate (PMMA) and poly vinyl alcohol (PVA) were made with CeF(3): 5.0 mol%Tb(3+), CeF(3): 5.0 mol% Dy(3+) and triply doped white light emitting composition. The CeF(3)/PMMA (PVA) nanocomposite films, so obtained, are highly transparent (in the visible spectral range) and exhibit strong photoluminescence upon UV excitation.     

Optical characterization of Sm3+ and Dy3+:ZnO-PbO-B2O3 glasses

Here, we present the results of the analysis of Sm(3+) or Dy(3+) (0.5 mol%) ions doped heavy metal oxide (HMO)-based zinc lead borate (ZLB) glasses. Optical measurements such as absorption, emission spectra, lifetimes, XRD, DSC profiles have been carried out. The emission spectrum of Sm(3+):ZLB has shown the emission transitions of (4)G(5/2)-->(6)H(5/2) (563 nm), (4)G(5/2)-->(6)H(7/2) (598 nm), (4)G(5/2)-->(6)H(9/2) (646 nm), (4)G(5/2)-->(6)H(11/2) (708 nm) with lambda(exc): 401 nm ((6)H(5/2)-->(4)F(7/2)). In the case of the Dy(3+):ZLB glass, emission transitions of (4)F(9/2)-->(6)H(15/2) (485 nm), (4)F(9/2)-->(6)H(13/2) (575 nm) and (4)F(9/2)-->(6)H(11/2) (664 nm) with lambda(exi): 447 nm ((6)H(15/2)-->(4)I(15/2)) have been identified. Energy level schemes relating to the emission mechanisms involved in Sm(3+) and Dy(3+) glasses have been given.     

GdAlO_3∶Tb,RE中Tb,RE的能量传递研究

采用柠檬酸盐硝酸盐燃烧法制备了GdAlO3∶Tb,RE荧光粉体.在紫外激发下(254nm),GdAlO3∶Tb发射绿色荧光(5D4→7F5,544nm),Dy共掺杂对绿色发光有增强作用,Ce共掺杂对GdAlO3∶Tb绿色发光有降低作用.激发谱和能谱研究表明:Dy能级嵌入Tb主发射能级5D4(绿色发光能级)、5D3(蓝色发光能级)能级之间,Ce能级嵌入Tb主发射能级5D4、5D3能级上方.这种能级嵌入方式,使得稀土离子之间存在声子支持的共振能量传递,但Tb→Dy→Tb能量传递使Tb绿色发射(5D4→7FJ(J=3,4,5,6))增强,蓝色发射(5D3→7FJ(J=3,4,5,6))减弱;而Ce→Tb能量传递使Tb蓝色发射增强,绿色发射减弱.     

Luminescence switching behavior through redox reaction in Ce3+ co-doped LaPO4:Tb3+ nanorods: re-dispersible and polymer film

Re-dispersible Tb(3+) doped LaPO(4) nanorods have been prepared using ethylene glycol (EG) as a capping agent as well as reaction medium at a relatively low temperature of 150 °C. The X-ray diffraction study reveals that all the doped samples are well crystalline with a monoclinic structure of the LaPO(4) phase. The luminescence intensity of (5)D(4)→(7)F(5) transition at 543 nm (green) is more prominent than that of (5)D(4)→(7)F(6) transition at 487 nm (blue) for all the samples. This is related to the polarizing effect from [PO(4)](3-) to the Tb(3+) site. Concentration dependent luminescence study shows that the luminescence intensity of Tb(3+) increases up to 10 at.% and decreases above this. This is due to the concentration quenching effect arising from cross relaxation among Tb(3+)-Tb(3+) ions. The results show that nanoparticles prepared in EG medium gives an enhanced luminescence compared to that prepared in water. This is attributed to the multiphonon relaxation effect from O-H groups surrounding over nanoparticles as well as the extent of increase of agglomeration among particles for samples prepared in water. Significant enhancement in the emission of Tb(3+) is also observed when Ce(3+) is used as the sensitizer in LaPO(4):Tb(3+)nanorods. The optimum concentration of Ce(3+) for maximum luminescence is found to be 7 at.% in Ce(3+) sensitized LaPO(4):Tb(3+) (5 at.%). Based on the energy transfer process from Ce(3+) to Tb(3+), the luminescence of Tb(3+) can be switched OFF and ON by performing oxidation and reduction of Ce(3+)?Ce(4+) using KMnO(4) and ascorbic acid, respectively. The samples are re-dispersible in water, methanol and can be incorporated into polyvinyl alcohol (PVA) films. They show a dark green emission under ultraviolet radiation.     

The quantum cutting of Tb(3+) in Ca(6)Ln(2)Na(2)(PO(4))(6)F(2) (Ln = Gd, La) under VUV-UV excitation: with and without Gd(3+)

The VUV-vis spectroscopic properties of Tb(3+) activated fluoro-apatite phosphors Ca(6)Ln(2-x)Tb(x)Na(2)(PO(4))(6)F(2) (Ln = Gd, La) were studied. The results show that phosphors Ca(6)Gd(2-x)Tb(x)Na(2)(PO(4))(6)F(2) with Gd(3+) ions as sensitizers have intense absorption in the VUV range. The emission color of both phosphors can be tuned from blue to green by changing the doping concentration of Tb(3+) under 172 nm excitation. The visible quantum cutting (QC) via cross relaxation between Tb(3+) ions was observed in cases with and without Gd(3+). Though QC can be realized in phosphors Ca(6)La(2-x)Tb(x)Na(2)(PO(4))(6)F(2), we found that Gd(3+)-containg phosphors have a higher QC efficiency, confirming that the Gd(3+) ion indeed plays an important role during the quantum cutting process. In addition, the energy transfer process from Gd(3+) to Tb(3+) as well as (5)D(3)-(5)D(4) cross relaxation was investigated and discussed in terms of luminescence spectra and decay curves.     

Optical characterization of Eu3+ and Tb3+ ions doped cadmium lithium alumino fluoro boro tellurite glasses

This article reports on the development and spectral results of Eu(3+) and Tb(3+) ions doped cadmium lithium alumino fluoro boro tellurite (CLiAFBT) glasses in the following composition. 40TeO2-30B2O3-10CdO-10Li2O-10AlF3 (Hostglass) (40-x)TeO2-30B2O3-10CdO-10Li2O-10AlF3-xEu2O3 (40-x)TeO2-30B2O3-10CdO-10Li2O-10AlF3-xTb4O7 where x=0.25, 0.50, 0.75, 1.0, 1.25 mol%. Glass amorphous nature and thermal properties have been studied using the XRD and DSC profiles. From the emission spectra of Eu(3+):glasses, five emission transitions have been observed at 578 nm, 592 nm, 612 nm, 653 nm, 701 nm and are assigned to the transitions (5)D(0)→(7)F(0), (7)F(1,)(7)F(2), (7)F(3) and (7)F(4), respectively, with λ(exci)=392 nm ((7)F(0)→(5)L(6)). In case of Tb(3+):glasses, four emission transitions ((5)D(4)→(7)F(6,)(7)F(5), (7)F(4) and (7)F(3)) are observed at 488 nm, 543 nm, 584 nm and 614 nm, respectively, with λ(exci)=376 nm. Decay curves and energy level diagrams have been plotted to evaluate the life times and to analyze the emission mechanism.     

Energy transfer and tunable luminescence properties of Eu3+ in TbBO3 microspheres via a facile hydrothermal process

Tb (1- x) BO 3: xEu (3+) ( x = 0-1) microsphere phosphors have been successfully prepared by a simple hydrothermal process directly without further sintering treatment. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL), low-voltage cathodoluminescence (CL), and time-resolved emission spectra as well as lifetimes were used to characterize the samples. The as-obtained phosphor samples present sphere-like agglomerates composed of nanosheets with highly crystallinity in spite of the moderate reaction temperature of 200 degrees C. Under ultraviolet excitation into the 4f (8) --> 4f (7)5d transition of Tb (3+) at 245 nm (or 284 nm) and low-voltage electron beams' excitation, TbBO 3 samples show the characteristic emission of Tb (3+) corresponding to (5)D 4 --> (7)F 6, 5, 4, 3 transitions; whereas TbBO 3:Eu (3+) samples mainly exhibit the characteristic emission of Eu (3+) corresponding to (5)D 0 --> (7)F 0, 1, 2, 3, 4 transitions due to an efficient energy transfer occurs from Tb (3+) to Eu (3+). The increase of Eu (3+) concentration leads to the increase of the energy-transfer efficiency from Tb (3+) to Eu (3+) but also enhances the probability of the interaction between neighboring Eu (3+), which results in the concentration quenching. The PL color of TbBO 3: xEu (3+) phosphors can be easily tuned from green, yellow, orange, to red-orange by changing the doping concentration ( x) of Eu (3+), making the materials have potential applications in fluorescent lamps for advertizing signs and other color display fields.     

Strong visible up-conversion emission in Tb3+, Tm3+ and Tb3+-Tm3+ co-doped tellurite glasses sensitized by Yb3+

Up-conversion luminescence characteristics under 975 nm excitation have been investigated with Tb3+/Tm3+/Yb3+ triply doped tellurite glasses. Here, green (547 nm: (5)D(4)-->(7)F(4)) and red (660 nm: (5)D(4)-->(7)F(2)) up-conversion (UC) luminescence originating from Tb3+ is observed strongly, because of the quadratic dependences of emission intensities on the excitation power. Especially, the UC luminescence was intensified violently with the energy transfer from the Tm3+ ions involves in the Tb3+ excitation. To the Tb3+/Tm3+/Yb3+ triply doped glass system, a novel up-conversion mechanism is proposed as follows: the energy of (3)G(4) level (Tm3+) was transferred to (5)D(4) (Tb(3+)) and the 477-nm UC luminescence of Tm3+ was nearly quenched.     

Preferential suppression of high-energy upconverted emissions of Tm3+ by Dy3+ ions in Tm3+/Dy3+/Yb3+-doped LiYF4 colloidal nanocrystals

The intensity of high energy UV and blue upconverted emissions of Tm(3+) ions in Tm(3+)/Yb(3+) co-doped LiYF(4) colloidal nanocrystals was selectively reduced compared to the NIR emission at 802 nm. This was achieved by doping a small amount of Dy(3+) ions into the host matrix.     

Microwave-assisted synthesis of hydrophilic BaYF5:Tb/Ce,Tb green fluorescent colloid nanocrystals

Hydrophilic Ce, Tb doped BaYF(5) nanocrystals with uniform size were synthesized by a microwave-assisted route. The synthesized nanocrystals can be well dispersed in hydrophilic solutions (DMSO, DMF, EG, H(2)O). This synthesis procedure represents a less time consuming method, with high product yield and without using any assistant or/and template reagents, which may be expected to be a general method for rapid synthesis of other hydrophilic RE doped fluoride fluorescent nanocrystals. The Ce(3+), Tb(3+) codoped BaYF(5) nanocrystals show bright green fluorescence emission. The Ce(3+) acts as an effective energy transfer medium and the emission at the high (5)D(3) energy level of Tb is enhanced in this host material.     

Bifunctional Mixed-Lanthanide Cyano-Bridged Coordination Polymers Ln(0.5)Ln'(0.5)(H(2)O)(5)[W(CN)(8)] (Ln/Ln' = Eu(3+)/Tb(3+), Eu(3+)/Gd(3+), Tb(3+)/Sm(3+))

A new family of mixed-lanthanide cyano-bridged coordination polymers Ln(0.5)Ln'(0.5)(H(2)O)(5)[W(CN)(8)] (where Ln/Ln' = Eu(3+)/Tb(3+), Eu(3+)/Gd(3+), and Tb(3+)/Sm(3+)) containing two lanthanide and one transition metal ions were obtained and characterized by X-ray diffraction, photoluminescence spectroscopy, magnetic analyses, and theoretical computation. These compounds are isotypical and crystallize in the tetragonal system P4/nmm forming two-dimensional grid-like networks. They present a magnetic ordering at low temperature and display the red Eu(3+) ((5)D(0) → (7)F(0-4)) and green Tb(3+) ((5)D(4) → (7)F(6-2)) characteristic photoluminescence. The Tb(0.5)Eu(0.5)(H(2)O)(5)[W(CN)(8)] compound presents therefore green and red emission and shows Tb(3+)-to-Eu(3+) energy transfer.     

Tb掺杂SiO2-B2O3-NaF玻璃的制备及发光性质

使用正硅酸乙酯、硼酸和氟化钠为前驱体,0.10 mol•L-1TbCl3溶液为掺杂剂,通过溶胶-凝胶方法制备了Tb3＋掺杂的SiO2-B2O3-NaF玻璃,研究了Tb3＋在SiO2-B2O3-NaF体系中的发光性质,结果显示发光体能产生强的绿色发光(544 nm),归属于Tb3＋的5D4—7F5电子跃迁.Tb3＋含量不同时,除发光强度不同外,其发射光谱基本相同,并且在低掺杂Tb3＋样品和低退火温度样品中检测到了来自5D3跃迁产生的峰,其跃迁随Tb3＋掺杂浓度的增加和退火温度的升高而发生猝灭,这种现象归因于5D3－5D47F6—7F0和/或5D3—7F07F6—5D4跃迁中发生了交叉弛豫现象.Tb3＋在SiO2-B2O3-NaF玻璃中的激发光谱由一个宽峰和一系列窄峰组成,宽峰最大波长位于230 nm,对应于Tb3＋的4f 8—4f 75d 1跃迁,一系列窄峰位于300～380 nm处,归属于4f 8跃迁,所有发光材料的XRD和TEM测试显示材料是非晶态的.     

Electrospinning synthesis and luminescence properties of one-dimensional La(9.33)(SiO4)6O2: Ln3+ (Ln = Ce, Eu, Tb) microfibers

One-dimensional La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) microfibers were fabricated by a simple and cost-effective electrospinning method. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL) and low voltage cathodoluminescence (CL) as well as kinetic decay were used to characterize the resulting samples. SEM and TEM results indicated that the diameter of the microfibers annealed at 1000 °C for 3 h was 200-245 nm. The microfibers were further composed of fine and closely linked nanoparticles. La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) phosphors showed the characteristic emission of Ce(3+) (5d → 4f), Eu(3+) ((5)D(0)→(7)F(J)) and Tb(3+) ((5)D(3,4)→(7)F(J)) under ultraviolet excitation and low-voltage electron beams (3-5 kV) excitation. An energy transfer from Ce(3+) to Tb(3+) was observed in the La(9.33)(SiO(4))(6)O(2): Ce(3+), Tb(3+) phosphor under ultraviolet excitation and low-voltage electron beam excitation. Luminescence mechanisms were proposed to explain the observed phenomena. Blue, red and green emission can be realized in La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) microfibers by changing the doping ions. So the La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) phosphors have potential applications in full-color field emission displays.     

YF3:Ln3+ (Ln = Ce, Tb, Pr) submicrospindles: hydrothermal synthesis and luminescence properties

YF(3):Ln(3+) (Ln = Ce, Tb, Pr) microspindles were successfully fabricated by a facile hydrothermal method. X-Ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), lifetimes, photoluminescence (PL) and low-voltage cathodoluminescence (CL) were used to characterize the resulting samples. The lengths and diameters of YF(3):0.02Ce(3+) microspindles are around 760 nm and 230 nm, respectively. Adding dilute acid and trisodium citrate (Cit(3-)) are essential for obtaining YF(3) microspindles. A potential formation mechanism for YF(3) microspindles has been presented. PL spectroscopy investigations show that YF(3):Ce(3+) and YF(3):Tb(3+) microcrystals exhibit the characteristic emission of Ce(3+) 5d → 4f and Tb(3+ 5)D(4)→(7)F(J) (J = 6-3) transitions, respectively. In addition, the energy transfer from Ce(3+) to Tb(3+) was investigated in detail for YF(3):Ce(3+), Tb(3+) microspindles. Under the excitation of electron beams, YF(3):Pr(3+) show quantum cutting emission and YF(3):Ce(3+), Tb(3+) phosphors exhibit more intense green emission than the commercial phosphor ZnO:Zn.     

Preparation of luminescent and mesoporous Eu3+/Tb3+ doped calcium silicate microspheres as drug carriers via a template route

Luminescent and mesoporous Eu(3+)/Tb(3+) doped calcium silicate microspheres (LMCS) were synthesized by using mesoporous silica spheres as the templates. The LMCS and drug-loaded samples were characterized by means of X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), N(2) adsorption/desorption, and photoluminescence (PL) spectra. The results reveal that the LMCS have uniform spherical morphology with a diameter around 400 nm and the mesopore size of 6 nm. The prepared samples exhibit little cytotoxicity at concentrations below 5 mg mL(-1) via MTT assay. In addition, drug storage/release properties of the LMCS were demonstrated for ibuprofen (IBU). The obtained LMCS can be used to encapsulate drugs and release them. Under excitation by UV light, the IBU-loaded samples still show the characteristic (5)D(0)-(7)F(1-3) emission lines of Eu(3+) and the characteristic (5)D(4)-(7)F(3-6) emission lines of Tb(3+). The PL intensity of Eu(3+) in the drug carrier system increases with the cumulative released amount of IBU, making the drug release able to be tracked or monitored by the change of luminescence of Eu(3+). The LMCS reported here with mesoporous structure, good biocompatibility and luminescent property can be a promising drug delivery carrier.     

Patterning of Gd2(WO4)3:Ln3+ (Ln=Eu, Tb) luminescent films by microcontact printing route

Gd(2)(WO(4))(3) doped with Eu(3+) or Tb(3+) thin phosphor films with dot patterns have been prepared by a combinational method of sol-gel process and microcontact printing. This process utilizes a PDMS elastomeric mold as the stamp to create heterogeneous pattern on quartz substrates firstly and then combined with a Pechini-type sol-gel process to selectively deposit the luminescent phosphors on hydrophilic regions, in which a Gd(2)(WO(4))(3):Ln(3+) (Ln=Eu, Tb) precursor solutions were employed as ink. X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence (PL) spectra, as well as low voltage cathodoluminescence (CL) spectra were carried out to characterize the obtained samples. Under ultraviolet excitation and low-voltage electron beams excitation, the Gd(2)(WO(4))(3):Eu(3+) samples exhibit a strong red emission arising from Eu(3+)(5)D(0,1,2)-(7)F(1,2) transitions, while the Gd(2)(WO(4))(3):Tb(3+) samples show the green emission coming from the characteristic emission of Tb(3+) corresponding to (5)D(4)-(7)F(6,5,4,3) transitions. The results show that the patterning of rare earth-doped phosphors through combining microcontact printing with a Pechini-type sol-gel route has potential for field emission displays (FEDs) applications.     

Luminescence of Tb3+ and Eu3+ doped amorphous zinc benzoates

The Tb(3+) and Eu(3+) doped amorphous zinc benzoate were prepared. Their infrared absorption, emission and excitation spectra were measured. The luminescence mechanisms of Tb(3+) and Eu(3+) in the amorphous substrate were discussed. The bonding modes of OCO group to Zn(2+) ion have two of symmetric and asymmetric bridging bidentate. The energy of the S(1) pi,pi* excited state of benzene ring can be transferred to Tb(3+) and Eu(3+) ion, and results in characteristic emission from the 5D(4)-->(7)F(j) of Tb(3+) and 5D(0)-->(7)F(j) of Eu(3+), respectively.     

磷灰石结构荧光粉Ba10(PO4)6F2:Ce3+,Tb3+的合成、发光和能量传递

采用高温固相法合成了系列Ce~(3+)和Ce~(3+)/Tb~(3+)激活的具有磷灰石结构荧光粉Ba_(10)(PO_4)_6F_2。用X射线衍射(XRD)、扫描电镜(SEM)、激发和发射(PLE和PL)光谱对样品进行了表征分析。研究结果表明:所合成的荧光粉Ba_(10)(PO_4)_6F_2∶Ce~(3+),Tb~(3+)具有氟磷灰石结构,样品微观呈现不规则形貌。荧光粉Ba10-x(PO4)6F2∶x Ce~(3+)的相对发射强度随着x增加而增强,当x=0.09时,荧光强度达到最大。荧光粉Ba_(10)(PO_4)_6F_2∶Ce~(3+),Tb~(3+)的激发光谱为240～330 nm的宽带,发射光谱呈现出Ce~(3+)的5d→4f跃迁紫外光(335和358 nm)发射和Tb~(3+)的4f→4f跃迁绿光(542 nm)发射。光谱特性表明,发光过程中存在Ce~(3+)→Tb~(3+)能量传递,能量传递效率可以达到60%。计算Ce~(3+)和Tb~(3+)的临界距离为0.79 nm,能量传递机理是偶极-偶极交互作用。此外,详细论述了Ce~(3+)和Tb~(3+)之间的能量传递和发光的过程。通过调节Tb~(3+)的掺杂浓度,对荧光粉发光色坐标与Tb~(3+)的掺杂浓度之间的关系也进行了研究,随着Tb~(3+)的掺杂量从0增加0.52,荧光粉Ba_(10)(PO_4)_6F_2∶Ce~(3+),Tb~(3+)的发射光谱色坐标可以从(0.149 4,0.045 1)蓝色区变化到(0.280 1,0.585 3)绿色区。     

Remarkable changes in the optical properties of CeO(2) nanocrystals induced by lanthanide ions doping

Highly uniform and well-dispersed CeO(2) and CeO(2):Eu(3+) (Sm(3+), Tb(3+)) nanocrystals were prepared by a nonhydrolytic solution route and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), UV/vis absorption, and photoluminescence (PL) spectra, respectively. The result of XRD indicates that the CeO(2) nanocrystals are well crystallized with a cubic structure. The TEM images illustrate that the average size of CeO(2) nanocrystals is about 3.5 nm in diameter. The absorption spectrum of CeO(2):Eu(3+) nanocrystals exhibits red-shifting with respect to that of the undoped CeO(2) nanocrystals. Under the excitation of 440 nm (or 426 nm) light, the colloidal solution of the undoped CeO(2) nanocrystals shows a very weak emission band with a maximum at 501 nm, which is remarkably enhanced by doping additional lanthanide ions (Eu(3+), Tb(3+), Sm(3+)) in the CeO(2) nanocrystals. The emission band is not due to the characteristic emission of the lanthanide ions but might arise from the oxygen vacancy which is introduced in the fluorite lattice of the CeO(2)nanocrystals to compensate the effective negative charge associated with the trivalent ions.     

A Novel White Light Emitting Long-lasting Phosphor

A novel white light emitting long-lasting phosphor Cd1-xDyxSiO3 is reported in this letterThe Dy^3 doped CdSiO3 phosphor emits white light. The phosphorescence can be seen with the naked eye in the dark clearly even after the 254nm UV irradiation have been removed for about 30min. In the emission spectrum of 5% Dy^3 doped CdSiO3 phosphor, there are two emission peaks of Dy^3 , 580nm (^4F9/2→^6H13/2) and 486nm (^4F9/2→^6H15/2), as well as a broad band emission located at about 410nm. All the three emissions form a white light with CIE chromaticity coordinates x=0.3874, y=0.3760 and the color temperature is 4000 K under 254 nm excitation. It indicated that this phosphor is a promising new luminescent material for practice application.