Phosphonic acid monolayers for binding of bioactive molecules to titanium surfaces

Two different phosphonic acid monolayer films for immobilization of bioactive molecules such as the protein BMP-2 on titanium surfaces have been prepared. Monolayers of (11-hydroxyundecyl)phosphonic acid and (12-carboxydodecyl)phosphonic acid molecules were produced by a simple dipping process (the T-BAG method). The terminal functional groups on these monolayers were activated (carbonyldiimidazole for hydroxyl groups and N-hydroxysuccinimide for carboxyl groups) to bind amine-containing molecules. The reactivity of the surfaces was investigated using trifluoroethylamine hydrochloride and BMP-2. Each step of the surface modification procedure was characterized by X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry.     

A spectral study of transition-metal complexes on a chelating ion-exchange resin containing aminophosphonic acid groups

The coordination mode of a commercial chelating ion-exchange resin, ES 467, containing aminomethylphosphonic acid groups anchored on a macroporous styrenedivinylbenzene copolymer, with several metal ions, such as chromium(III), cobalt(II), nickel(II), copper(II) and zinc(II) has been studied with the aid of IR, ligand field and ESR spectra. The chelating group of ES 467, aminomethylphosphonic acid, appears to bind different metal ions mainly through oxygen atoms of the phosphonic acid group, though, in the case of those species containing low-loading of metal ions, the secondary amine nitrogen atom also appears to take part in coordination. Most of the metal ions studied seem to be present as six-coordinated species in the polymeric matrix, whereas cobalt(II) species show electronic spectra which are consistent with the presence of both four-coordinated (tetrahedral) and six-coordinated (octahedral) structures of these species. The distribution coefficients for cobalt(II), nickel(II), copper(II) and zinc(II) have been determined and it appears that the resin ES 467 binds copper(II) ions selectively. An attempt has been made to find a possible relationship between the selectivity of the chelating resin and the stereochemistry of the adsorbed metal ions.     

Structure and Physical Properties of Coordination Compounds of 2-Aminoindan-2-Phosphonic Acid with Some D-Electron Elements

Abstract

Many complexes of 1-aminoakylphosphonic acids have been obtained and their structures have been studied [1–3]. On the other hand, 2-aminoindan-2-phosphonic acid (2-AIP), the phosphonic conformationally restricted cyclic analogue of phenylalanine, has been recently obtained [4]. We undertook a study of interaction of cobalt(II), nickel(II), and copper(II) with 2-AIP, to learn how the rigid Iigand structure influences the complexes structure.     

Synthesis and proton conductivities of phosphonic acid containing poly‐(arylene ether)s

A novel phosphonic acid containing bisphenol was successfully synthesized from phenolphthalein and m‐aminophenylphosphonic acid. A series of homo‐ and copoly‐(arylene ether)s containing phosphonic acid groups were prepared by solution nucleophilic polycondensation. These phosphonic acid containing polymers can readily be dissolved in common organic solvents, such as dimethyl sulfoxide, N‐methyl‐2‐pyrrolidinone, and N‐cyclohexylpyrrolidinone, and can be cast into tough and smooth films. The presence of phosphonic acid pendants in the poly‐(arylene ether)s was confirmed by NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and conductivity measurements. This is the first report on the attachment of phenylphosphonic acid groups as side chains to aromatic polyethers. These poly‐(arylene ether)s had very high glass‐transition temperatures ranging from 254 to >315 °C and high molecular weights. The conductivities of the synthesized polymers were analyzed by the Cole–Cole method, and they ranged from 10^?5 to 10^?6 Scm^?1. The synthesized polymers also exhibited good solution processability. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3218–3226, 2001     

Metallic film formation using direct micropatterning with photoreactive metal complexes

Palladium, cobalt, and nickel in complex with photoacid-generating ligands, 4-(2-nitrobenzyloxycarbonyl)catechol and 4-(6-nitroveratryloxycarbonyl)catechol, were prepared in solution. Films formed from the metal complex solutions perform as positive-tone, directly photopatternable palladium, cobalt, nickel oxide, or composite film precursors. After exposure, acid-bearing selectively soluble complexes could be removed to give patterned films upon developing in aqueous base, which were transformable to the corresponding pattern-preserving metal/metal oxide film. The photodynamics of photoinduced solubility and direct micropatterning of palladium, cobalt, nickel, and palladium/nickel oxide composite films were investigated. Employing palladium as the initiator for autocatalytic chemical plating, selective direct copper plating on palladium film on polyethylene naphthalate and palladium/nickel oxide composite film on glass was accomplished.     

Hexayne Amphiphiles and Bolaamphiphiles

Oligoynes with two or more conjugated carbon–carbon triple bonds are useful precursors for carbon-rich nanomaterials. However, their range of applications has so far been severely limited by the challenging syntheses, particularly in the case of oligoynes with functional groups. Here, we report a universal synthetic approach towards both symmetric and unsymmetric, functionalized hexaynes through the use of a modified Eglinton–Galbraith coupling and a sacrificial building block. We demonstrate the versatility of this approach by preparing hexaynes functionalized with phosphonic acid, carboxylic acid, ammonium, or thiol head groups, which serve as neutral, cationogenic, or anionogenic interfacially active groups. We show that these hexaynes are carbon-rich amphiphiles or bolaamphiphiles that self-assemble at liquid–liquid interfaces, on solid surfaces, as well as in aqueous media.     

Site-selective direct photochemical deposition of copper on glass substrates using TiO2 nanocrystals

Deposition of copper thin films was achieved by a photocatalytic reaction of site-selectively adsorbed TiO(2) nanocrystals for direct fabrication of copper circuit patterns on glass substrates. The nanocrystal monolayers absorbed on hydrophobic surface templates serve as an effective photocatalyst, producing metallic copper and formic acid via oxidation of methanol in solution. The formic acid generated has also been suggested to serve as an electron donor that accelerates copper deposition through a UV-mediated autocatalytic reaction, even after nanocrystals are embedded into the grown copper films. The thickness of the deposited copper films was easily controlled by varying the UV irradiation time, irradiation power, and initial concentration of methanol as a hole scavenger. The process presented herein provides an effective methodology for resist-free, direct metallization of insulating substrates.     

The assembly of rotaxane-like dye/cyclodextrin/surface complexes on aluminium trihydroxide or goethite

Simple azo-dyes carrying phosphonic acid and arsonic acid substituents such as 4-(4-hydroxyphenyl azo)phenylphosphonic acid (5) and 4-(4-hydroxyphenylazo)phenylarsonic acid (6) bind more strongly to high surface area oxides such as aluminium trihydroxide and goethite than their carboxylic and sulfonic acid analogues and the phosphonate-functionalized dyes have been shown to have greater humidity fastness when printed onto commercial alumina-coated papers. Adsorption isotherm measurements provide evidence for the formation of ternary dye/cyclodextrin/surface complexes. Dyes which form such ternary complexes show higher light fastness when printed onto alumina coated papers in an ink formulation containing alpha-cyclodextrin.     

Synthesis of poly-yne polymers containing transition metals,disilane, disiloxane and phosphine groups in the main chain

The synthesis and characterization of metal poly-yne polymers containing disilane, disiloxane and phosphine groups in the main chain are described. The platinum and palladium poly-yne polymers were synthesized by polycondensation reactions between a metal chloride and an α, ω-bisethynyl complex in amines in the presence of cuprous iodide as a catalyst. The nickel poly-yne polymers were synthesized by an alkynyl ligand exchange reaction between a nickel acetylide and an α, ω-bisethynyl complex in diethylamine in the presence of cuprous iodide as a catalyst. The reaction of the platinum poly-yne polymer, containing disiloxane groups in the main chain, with copper (I) salts afforded adducts of η-²-bonded σ-acetylide polymer complexes. The reactions of the palladium poly-yne polymer, containing phosphine groups in the main chain, with transition-metal carbonyl complexes afforded polymer complexes which have phosphorus in the main chain-transition-metal bonds. A concentrated solution of the platinum poly-yne polymer containing disiloxane groups in the main chain forms a lyotropic liquid crystal in dichloromethane or 1, 2-dichloroethane.     

The factors that determine the temperature of fusion of Cu and Ni thin films on inert surfaces

A method for calculating the temperature of fusion of thin films depending on their thickness was suggested. It was shown for the example of copper and nickel films that the main factors that determined a substantial decrease in the temperature of fusion of thin films compared with massive materials were the different heats of fusion of thin films, the temperature dependence of the heat of fusion, and the tendency of thin-film systems toward decreasing the absolute surface energy at the expense of decreasing the specific surface energy and surface area. The dependences of the temperature of fusion on the thickness of copper and nickel films were calculated. Fusion and dispersion processes were studied as depending on nickel film thickness on the surfaces of Al₂O₃ and SiO₂. The calculation results obtained for copper and nickel were in close agreement with experimental data.     

Properties of polyimide films doped with copper complexes

Polyimide films based on either 3, 3′, 4, 4′-benzophenone tetracarboxylic acid dianhydride or pyromellitic dianhydride with 4,4′-oxydianiline have been doped with copper(I) and copper(II) complexes. High-quality, flexible, glass-cast films have been obtained which exhibit increased softening temperatures and lower polymer decomposition temperatures. The atmosphere and glass sides of the films are quite different. The copper(I) dopant is oxidized on the air side of the film, while the glass side contains predominantly copper (I). In the copper(II) case most of the copper appears on the air side as a silvery substance in the Cu(II) state. Chemical as well as ion etching can remove this material. Electrical resistivity of the copper(II)-doped films is decreased by three to five orders of magnitude relative to the polymer alone.     

Infrared spectroscopy of competitive interactions between liquid crystals, metal salts, and dimethyl methylphosphonate at surfaces

We report the use of Fourier transform polarization modulation infrared reflection-absorption spectroscopy (PM-IRRAS) to characterize the influence of dimethyl methylphosphonate (DMMP) on the molecular interactions occurring within thin films of nitrile-containing liquid crystals supported on surfaces presenting metal perchlorate salts. Infrared spectra obtained using thin films of 4'-octyl-4-biphenylcarbonitrile (8CB) supported on copper(II) perchlorate salts reveal the nitrile groups of 8CB to be coordinated to the copper(II) on these surfaces, and subsequent exposure of the system to DMMP to result in the elimination of these coordinated nitrile groups. Concurrently, evidence of coordination of the phosphoryl group of DMMP with copper(II) is provided by measurement of a shift of the phosphoryl stretch from 1246 to 1198 cm(-1). In contrast, surfaces presenting nickel(II) perchlorate salts only weakly coordinate with DMMP [the phosphoryl peak shifts from 1246 to 1213 cm(-1) in the presence of nickel(II)], and exposure of 8CB to DMMP results in only partial loss of coordination of the nitrile groups of 8CB with nickel(II). These PM-IRRAS measurements and others reported in this article provide insights into the molecular origins of macroscopic ordering transitions that are observed when micrometer-thick films of nitrile-containing liquid crystals supported on copper(II) or nickel(II) perchlorate are exposed to DMMP: Upon exposure to DMMP, nematic phases of 4'-pentyl-4-biphenylcarbonitrile (5CB) supported on copper(II) perchlorate salts undergo ordering transitions, whereas 5CB supported on nickel(II) perchlorate salts do not. Our IR results support the hypothesis that these ordering transitions reflect the relative strengths of coordination interactions occurring between the 5CB, DMMP, and the metal salts at these interfaces.     

Rh(I)-Catalyzed Enantioselective Hydrogenation of α-Substituted Ethenylphosphonic Acids

A class of chiral Rh(I) catalysts containing monodentate phosphorous acid diesters tautomerized from the corresponding secondary phosphine oxides was discovered by serendipitous hydrolysis of phosphoramidite ligands. The evolved catalysts demonstrated unprecedented enantioselectivities (98-99% ee) and high catalytic activities (as low as 0.01 mol% catalyst loading) in asymmetric hydrogenations of a wide variety of α-aryl-/alkyl-substituted ethenylphosphonic acids, providing a facile approach to the corresponding enantiopure phosphonic acids with significant biological importance.     

Coordination chemistry of the water-soluble ligand TPPTP and formation of a [Mo(CO)5(m-TPPTP)] monolayer on an alumina surface

Phosphonate and phosphonic acid functionalized phosphine complexes of platinum(II) were prepared via direct reaction of the ligands with K2PtCl4 in water. Either cis or trans geometries were found depending on the nature of the ligand. The crystal structure of P(3-C6H4PO3H2)3.2H2O (6b) (triclinic, P1, a = 8.3501(6) A, b = 10.1907(6) A, c = 14.6529(14) A, alpha = 94.177(6) degrees, beta = 105.885(6) degrees, gamma = 108.784(5) degrees, Z = 2) shows a layered arrangement of the phosphonic acid. The phosphonodiamide complex cis-[PtCl2(P[4-C6H4PO[N(CH3]2]]3)2].3H2O (10) was synthesized in 89% yield and hydrolyzed to the phosphonic acid complex using dilute HCl. Aqueous phase and silica gel supported catalytic phosphonylation of phenyl triflate using palladium phosphine complexes was achieved. A molybdenum complex, Mo(CO)5[P3-C6H4PO3H2)3] (11), was synthesized in situ and grafted to an alumina surface. XPS, RBS, and AFM studies confirm the formation of a monolayer of 11 on the alumina surface.     

Chemical reduction and spectrophotometric determination of silver, copper and nickel

Silver(I), copper(II) and nickel(II) can be reduced to the metallic state by formaldehyde at pH 11, chromium(II) in 2.5M sulphuric acid, and borohydride at pH 5.5-6.0, respectively. Reoxidation of these metals with iron(III) in the presence of Ferrozine enables their determination at concentration below 1 mug/ml by measurement of the absorbance of the iron(II)-Ferrozine complex at 562 nm, with a precision better than 3%. The apparent molar absorptivities for silver, copper and nickel are 2.78 x 10(4), 5.56 x 10(4) and 5.58 x 10(4) l.mole(-1).cm(-1), respectively. The average thickness of silver films on glass surfaces can be determined in the way.     

Molecular adsorption on ZnO(1010) single-crystal surfaces: morphology and charge transfer

While ZnO has excellent electrical properties, it has not been widely used for dye-sensitized solar cells, in part because ZnO is chemically less stable than widely used TiO(2). The functional groups typically used for surface passivation and for attaching dye molecules either bind weakly or etch the ZnO surface. We have compared the formation of molecular layers from alkane molecules with terminal carboxylic acid, alcohol, amine, phosphonic acid, or thiol functional groups on single-crystal zinc oxide (1010) surfaces. Atomic force microscopy (AFM) images show that alkyl carboxylic acids etch the surface whereas alkyl amine and alkyl alcohols bind only weakly on the ZnO(1010) surface. Phosphonic acid-terminated molecules were found to bind to the surface in a heterogeneous manner, forming clusters of molecules. Alkanethiols were found to bind to the surface, forming highly uniform monolayers with some etching detected after long immersion times in an alkanethiol solution. Monolayers of hexadecylphosphonic acid and octadecanethiol were further analyzed by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and electrochemical measurements. AFM scratching shows that thiols were bound strongly to the ZnO surface, suggesting the formation of strong Zn-S covalent bonds. Surprisingly, the tridentate phosphonic acids adhered much more weakly than the monodentate thiol. The influence of organic grafting on the charge transfer to ZnO was studied by time-resolved surface photovoltage measurements and electrochemical impedance measurements. Our results show that the grafting of thiols to ZnO leads to robust surfaces and reduces the surface band bending due to midgap surface states.     

An infrared study on the chemisorption of tertiary phosphines on coinage and platinum group metal surfaces

The chemisorption of dimethylphenyl-, methyldiphenyl- and triphenylphosphine on evaporated gold, silver, copper, rhodium, iridium, palladium, platinum and nickel surfaces has been studied by means of infrared reflection–absorption spectroscopy (IRAS). Multilayers of physisorbed phosphine are formed on the surfaces of all metals studied except nickel after deposition from dilute toluene solution. The deposition rate varies for different metal surfaces and it is sometimes quite slow. The standard immersion time was 20 h in this study to secure that an equilibrium between the surface and the solution is reached. Several minutes of ultrasonic treatment are required to get rid of the physisorbed phosphine, leaving a very thin layer of chemisorbed phosphine on the metal surface. Most of the absorption bands in IRAS spectra of these thin layers show significant shifts, which are especially large for dimethylphenylphosphine. It is evident that the electron distribution in the entire phosphine molecules is changed and that the chemisorption to the coinage and platinum group metal surfaces is strong. Infrared spectra of coordination compounds of gold(I), silver(I) and copper(I) with dimethylphenyl-, methyldiphenyl- and triphenylphosphine and of the corresponding phosphine oxides have served as reference material for the chemisorbed phosphines. The spectra of the coordination compounds show similar shifts and intensity changes as the IRAS spectra of tertiary phosphines chemisorbed on the coinage and platinum group metals. This suggests that the studied phosphines are as strongly bound to the coinage and platinum group metal surfaces as to the monovalent coinage metal ions known to form very stable complexes with tertiary phosphines.     

Investigation of solid surfaces modified by Langmuir-Blodgett monolayers using sum-frequency vibrational spectroscopy and X-ray photoelectron spectroscopy

Langmuir-Blodgett (LB) monomolecular layers of alkylhydroxamic acids and alkylphosphonic acids on copper and iron substrates have been studied by X-ray photoelectron spectroscopy (XPS) and sum-frequency vibrational spectroscopy. According to the XPS results, the structures of the hydroxamic acid and phosphonic acid Langmuir-Blodgett films are very similar: the thickness of the layer of the hydrocarbon tails is typically 1.9-2.1 nm, while the layer of headgroups is about 0.3-0.35 nm thick. The tilt angle of the carbon chains is estimated to be 20-30 degrees with respect to the sample surface normal, and the molecules are connected to the substrate via their headgroups. Analysis of the P 2p and N 1s lines indicates the presence of deprotonated headgroups. The substrate Cu 2p line includes a component which can be assigned to Cu(2+) ions in a thin Cu(OH)(2) layer. The deposition of LB layers led to significant decrease of the hydroxide-related signal, which indicates that binding of the headgroups to the surface is accompanied by the elimination of water molecules. The sum-frequency spectra also clearly indicate that well-ordered monolayers can be formed by the Langmuir-Blodgett technique. Since the non-resonant background from the metal substrates renders the analysis of the spectra more difficult, model system samples on glass were prepared. It was found that the alkyl chains of the adsorbed acids predominantly adopt the all-trans conformation and form an ordered structure. Upper limits for the mean tilt angle of the terminal methyl groups are approximately 10-20 degrees.     

Proton-exchange membrane electrolytes derived from phosphonic acid containing poly(arylene ether)s

A novel phosphonic acid containing bisphenol was successfully synthesized from phenolphthalein and m-aminophenylphosphonic acid. Poly(arylene ether)s containing phosphonic acid groups were prepared from the bisphenol. This is the first report on the attachment of phenylphosphonic acid groups as side chains to aromatic polyethers. These polyethers had very high glass transition temperatures and molecular weights. The conductivities of the polyethers ranged from 10⁻⁵ to 10⁻⁶ S cm⁻¹ and therefore show promise as proton-exchange polymer electrolyte membranes for fuel cells.     

Redox-active ionic-liquid-assisted one-step general method for preparing gold nanoparticle thin films: applications in refractive index sensing and catalysis

We describe a general one-step facile method for depositing gold nanoparticle (GNP) thin films onto any type of substrates by the in situ reduction of AuCl(3) using a newly designed redox-active ionic liquid (IL), tetrabutylphosphonium citrate ([TBP][Ci]). Various substrates such as positively charged glass, negatively charged glass/quartz, neutral hydrophobic glass, polypropylene, polystyrene, plain paper, and cellophane paper are successfully coated with a thin film of GNPs. This IL ([TBP][Ci]) is prepared by the simple neutralization of tetrabutylphosphonium hydroxide with citric acid. We also demonstrate that the [TBP][Ci] ionic liquid can be successfully used to generate GNPs in an aqueous colloidal suspension in situ. The deposited GNP thin films on various surfaces are made up of mostly discrete spherical GNPs that are well distributed throughout the film, as confirmed by field-emission scanning electron microscopy. However, it seems that some GNPs are arranged to form arrays depending on the nature of surface. We also characterize these GNP thin films via UV-vis spectroscopy and X-ray diffractometry. The as-formed GNP thin films show excellent stability toward solvent washing. We demonstrate that the thin film of GNPs on a glass/quartz surface can be successfully used as a refractive index (RI) sensor for different polar and nonpolar organic solvents. The as-formed GNP thin films on different surfaces show excellent catalytic activity in the borohydride reduction of p-nitrophenol.