流动注射化学发光分析法测定三类磺胺类药物

研究发现可溶性锰(Ⅳ)氧化磺胺类药物(磺胺甲基异口恶唑、磺胺嘧啶和磺胺脒)可以产生弱的化学发光,甲醛对这一化学发光反应有较强的增敏作用,据此建立了一种测定磺胺类药物的流动注射化学发光分析法。该方法对3种磺胺类药物磺胺甲基异口恶唑、磺胺嘧啶、磺胺脒的检出限分别为2×10-8、3×10-8、2×10-8g/mL;线性范围分别为6.0×10-8~1.0×10-5、1.0×10-7~8.0×10-6、4.0×10-8~8.0×10-6g/mL。对6.0×10-6g/mL磺胺甲基异口恶唑、4.0×10-6g/mL磺胺嘧啶和4.0×10-6g/mL磺胺脒的相对标准偏差分别为1.1%、1.2%和2.2%(n=11)。此法已用于复方新诺明片剂中磺胺甲基异口恶唑的测定,结果与药典方法测定值一致。并对化学发光反应的机理进行了探讨。     

测定金鸡纳碱的流动注射化学发光新体系

过氧化氢和高碘酸钠溶液混合能产生弱化学发光,在这一体系中,金鸡纳碱的加入能极大地增强这一化学发光强度,该文对这一化学发光进行了初步的探讨,提出了可能的发光机理,并据此建立了测定金鸡纳碱(奎宁、奎尼丁和辛可宁)的高灵敏度化学发光法;测定奎宁、奎尼丁和辛可宁的线性范围分别为6.0×10-5～1.0×10-2g/L、4.0×10-5～1.0×10-2g/L和1.0×10-3～1.0×10-1g/L,检出限分别为2.1×10-5g/L,1.4×10-5g/L,3.5×10-4g/L;该法适用于奎宁药物的测定.     

碳毡电极对镧、镝、镱的富集分离

本文提出用碳毡电极富集和分离稀土元素镧、镝、镱(10~(-4)—10~(-9)g/mL)。研究了富集效率、电场影响、洗脱效率、分离效率、饱和富集率和电极重现性。实验结果表明:碳毡电极对浓度为10~(-5)g/mL以下的镧、镝、镱水溶液富集效率为90.5％以上,当电场负于各元素还原电位时富集效率明显上升,反之下降。被富集元素的洗脱效率高于89.3％。对10~(-5)g/mL的上述三种元素混合液进行分离时镧、镝和镱三者的富集效率分别为3.7％、30.4％和56.4％。每克碳毡电极对镧、镝、镱的动态饱和富集车分别为0.953×10~(-3)、1.072×10~(-3)和1.089×10~9-3),静态饱和富集率分别为1.137××10~(-3)1.173×10~(-3)和1.196×10~(-3)。电极经处理后十次重复使用所测富集效率的贝塞耳标准差小于0.95％。     

五种含氨基和吡啶基功能性聚合物对Ir(Ⅳ)、Ru(Ⅳ)的吸附行为

五种含氨基及吡啶基功能性聚合物:2,6-二氨基吡啶树脂(DAPR),2-氨基甲基吡啶树脂(2-AMPR),2-氨基吡啶树脂(2-APR),3-氨基吡啶树脂(3-APR),4-氨基吡啶树脂(4-APR)对Ir(Ⅳ)和Ru(Ⅳ)的最佳吸附酸度均为0.1mol HCl/L、对Ir(Ⅳ)的吸附容量分别为1200、786、480、500和381mgIr(Ⅳ)/g树脂,其吸附摩尔比(离子/功能基)分别为2.11,1.20,0.67,0.81,0.59。对Ru(Ⅳ)的吸附容量分别为146,249,177,140,188mgRu(Ⅳ)/g树脂,其吸附摩尔比分别为0.49,0.72,0.47,0.43,0.56。树脂对Ir(Ⅳ)的表现吸附活化能分别为27.7±1.4,33.9±0.5,37.0±1.0,37.1±2.9,39.7±4.5kJ/mol。25℃时对Ir(Ⅳ)吸附的分配系数Kd分别为37.5×10~3,14.8×10~3,8.2×10~328.4×10~3,40.1×10~3 mL/g,吸附热焓(除2-AMPR外)均为零。这五种树脂对Tr(Ⅳ)的吸附摩尔比均大于相应的Ru(Ⅳ)。树脂吸附Ir(Ⅳ)前后的红外谱图表明有氨基吡啶功能基特征峰的消失和Ir-Cl键吸收峰在290或310cm~(-1)处产生。     

催化过氧化氢氧化邻苯三酚红固体基质室温燐光猝灭法测定痕量钴

基于硼砂缓冲液中聚丙烯酰胺(PAM)存在下,邻苯三酚红(PGR)于滤纸固体基质上能发射强而稳定的室温燐光,PAM可活化钴离子催化H2O2氧化PGR反应,使PGR的室温燐光猝灭,从而建立了测定痕量钴的新方法。该方法的线性范围为4.8~960(×10-18g/斑)Co2+(浓度范围0.012~2.40×10-9g/L,0.4μL/斑),工作曲线的回归方程ΔIp=12.76+0.1248 mCo2+(×10-18g/斑),n=7,相关系数r=0.9993;检出限为1.2×10-18g/斑(对应浓度为3.0×10-12g/L)。对4.8和960(×10-18g/斑)Co2+重复测定11次(0.4μL点样量),RSD分别为3.6%和4.7%。用PAM比不加PAM时ΔIp增加4.6倍。本方法灵敏、准确、简便快速、重现性好,用于党参、当归、川芎、金银花和VB12中的痕量钴测定,结果满意。     

钒(Ⅴ)-亚铁氰化钾-鲁米诺化学发光体系测定钒

本文利用钒(Ⅴ)-亚铁氰化钾-鲁米诺化学发光体系建立了痕量钒的化学发光测定法。方法检出限是2×10~(-10)g/mL钒,线性范围是4×10~(-10)～1×10~(-7)g/mL钒,测定的相对标准偏差小于2%,考察了26种常见离子的干扰情况。方法已用于水样中痕量钒的测定。     

中国黄土石英中的~(10)Be研究——Ⅰ.“自身成因~(10)Be”与黄土源区侵蚀速率

对于0.2Ma以来的黄土堆积物,其石英“自身成因~(10)Be”主要来源于源区初始~(10)Be,载带着源区侵蚀速率变化信息。中国洛川黄土剖面GL 47(L_1),GL83(L_2)两样品石英“自身成因~(10)Be”浓度分别为5×10~5原子/g,2.2×10~6原子/g。据此计算的源区侵蚀速率为:L_1期(10—90ka),ε_(BeL_1)=1.5×10~(-3)cm/a;L_2期(130—190k a),ε_(BeL_2)=3.8×10~(-4)cm/a。更深层位黄土石英“自身成因~(10)Be”研究可望用于黄土地层测年。     

溶出伏安法同时测定水中痕量铀和镍

本文报道了同时测定钴和镍的一种方法.在 0.01mol/L NH_3·H_2O-0.01mol/LNH_4Cl-3.0×10~(-5)mol/L安息香缩氨基硫脲(BTSC)溶液中,钴(Ⅱ)和镍(Ⅱ)均产生非常灵敏的还原波,其峰电位分别是:-0.94和-0.75V(vs.SCE),峰电流与钴和镍的浓度分别在2.0×10~(-8)~1.0×10~(-6)和1.0×10~(-8)~8.0×10~(-7)mol/L范围内成直线关系,该方法用于测定水中痕量钴和镍,相对标准偏差分别为1.4~2.0%和2.1~2.5%,回收率分别在98.0%~101.8%和97.9%~102.1%之间.     

无保护流体室温燐光法同时测定α-萘乙酸和吲哚-3-乙酸

利用重原子效应(HAE)的选择性,建立了一种仅用TlNO3和KI为重原子微扰剂(HAP)、Na2SO3为除氧剂的无保护流体室温燐光(NP-RTP)同时测定α-萘乙酸(NAA)和吲哚-3-乙酸(IAA)的方法。吲哚-3-乙酸(KI为HAP)、α-萘乙酸(TlNO3为HAP)和α-萘乙酸(KI为HAP)的最大激发/发射峰分别位于280/448nm、280/490nm和280/490nm,线性范围分别为2.5×10-7~1.0×10-5mol/L、1.0×10-7~6.5×10-6mol/L和6.5×10-7~1.0×10-5mol/L,检出限分别为6.5×10-8mol/L、7.1×10-8mol/L和1.98×10-7mol/L。该方法已用于商品萘-吲可湿性粉剂中α-萘乙酸和吲哚-3-乙酸的同时测定,回收率和相对标准偏差分别为95.3%~104.7%和1.8%~4.6%。     

鲁米诺-I_2-As~(3+)化学发光反应的研究——矿石中砷的测定

本文拟定了鲁米诺-I_2-As~(3+)无机偶合反应化学发光法测As~(3+),不仅灵敏度高(检测限为9.8×10~(-10)g/ml)。线性范围宽(1.0×10~(-7)g/ml—1.0×10~(-9)g/ml),而且选择性好。另外,作者还将表面活性剂用于该体系,使得灵敏度进一步提高,其检测限为3.4×10~(-10)g/ml。将该法用于矿样中As~(3+)的测定,结果令人满意。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.