Inhibiting effect of 5-amino-5-methyluracil and its derivatives on the free-radical oxidation of 1,4-dioxane

The antiradical activity of 5-amino-6-methyluracil in the initiated radical-chain oxidation of 1,4-dioxane as a model system was studied quantitatively. The rate constant k ₇ of its reaction with the peroxyl radical of 1,4-dioxane was measured to be (5.6 ± 1.8) × 10⁵ L mol^?1 s^?1 at 333 K. The effect of the methyl substituents in the 1- and 3-positions of the uracil ring and in the amino group on the rate constant of inhibition was studied. The strengths of all N-H bonds in the 5-amino-6-methyluracil and its derivatives were calculated in the G3MP2B3 approximation and were compared with the measured rate constants of inhibition. By the example of the reaction of 5-amino-6-uracil with i-PrO ₂ ^?? , different attack pathways of the peroxyl radical at the N-H bonds of uracil were analyzed in the UB3LYP/6-311+G(d,p) approximation. The lowest activation barrier (5.8 kJ/mol) was observed for peroxyl radical attack on the (C⁵)N-H bonds. The site responsible for the inhibition activity of the compound is the amino group.     

Free-radical chain oxidation of 1,4-dioxane inhibited by 2-thio-6-aminouracil

The effect of 2-thio-6-aminouracil on the oxygen uptake kinetics has been studied in 1,4-dioxane free-radical chain oxidation as a model system. The presence of a thiocarbonyl group in the 2-position of the uracil ring makes 6-aminouracil highly reactive towards 1,4-dioxane peroxy radicals. The rate constant of the 1,4-dioxane peroxy radical interaction with 2-thio-6-aminouracil has been measured to be k₇ = (3.0 ± 0.5) × 10⁵ L mol^–1 s^–1 (333 K). The stoichiometric inhibition factor f = 1.1 ± 0.1 has been determined.     

Synthesis, 1H- and 13C-NMR spectra,crystal structure and ring openings of 1-methyl-6,9-epoxy-9-aryl-5,6,9,10-tetrahydro-1H-imidazo [3,2-e] [2H-1,5] oxazocinium methanesulfonate

The methanesulfonic acid catalyzed reaction of 1-(4-chloro- and 2,4-dichlorophenyl)-2-(1-methyl-2-imida-zolyl)ethanones 1a and 1b with glycerol produced cis- and trans-{2-haloaryl-2-[(1-methyl-2-imidazolyl)methyl]-4-hydroxymethyl}-1,3-dioxolanes 2a and 2b with a 2:1 cis/trans ratio. Besides these five-membered ketals, the reaction of 1a with glycerol afforded a small amount of trans-{2-(4-chlorophenyl)-2-[(1-methyl-2-imidazolyl)methyl]-5-hydroxy}-1,3-dioxane ( 3a , 7%). The reaction of methanesulfonyl chloride with cis-1 formed the corresponding methanesulfonates, cis- 4 , which rapidly cyclized to the title compounds 5 . Base-catalyzed ring opening of 5 furnished 1-methyl-5,6-dihydro-6-hydroxymethyl-8-(4-chloro- and 2,4-dichlorophenyl)-1H-imidazo[3,2-d][1,4]oxazepinium methanesulfonates 7 . Acid-catalyzed hydrolyses of 5 or 7 provided 1-methyl-2-[(4-chloro- and 2,4-dichloro)phenacyl]-3-[(2,3-dihydroxy)-1-propyl]imidazolium salts 12 . Structure proofs were based on extensive ¹H and ¹³C chemical shifts and coupling constants and structures of 3a and 5a were confirmed by single crystal X-ray crystallography.     

Relative reactivities of cyclic ketene acetals via cationic 1,2-vinyl addition copolymerization1

The relationship between the relative reactivities of ten cyclic ketene acetals and their structures was determined via cationic copolymerizations of eight different monomer pairs. Thus, 2-methylene-1,3-dioxolane (1) was copolymerized with 2-methylene-4-methyl-1,3-dioxolane (2), 2-methylene-4,5-dimethyl-1,3-dioxolane (3), 2-methylene-4,4,5,5-tetramethyl-1,3-dioxolane (4), 2-methylene-4-phenyl-1,3-dioxolane (5), and 2-methylene-4-(t-butyl)-1,3-dioxolane (6). Also 2-methylene-1,3-dioxane (7) was copolymerized with 2-methylene-4-methyl-1,3-dioxane (8), 2-methylene-4,4,6-trimethyl-1,3-dioxane (9), and 2-methylene-4-isopropyl-5,5-dimethyl-1,3-dioxane (10). The relative reactivities of these monomers are: 3 > 5 > 4 > 2 > 1 > 6; and 10 > 9 > 8 > 7. In spite of steric demands, substituents at the 4- or 5-positions in 2-methylene-1,3-dioxolane and substituents at the 4- or 6-positions in 2-methylene-1,3-dioxane serve to increase the copolymerization reactivity. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2841–2852, 1999     

Single crystal X-ray structure of 2,6-di-tert-butyl-4-(3-(4-chlorophenyl)-4-methyl-4,5-dihydroisoxazol-5-yl)phenol 1,4-dioxane hemisolvate

The title compound (2,6-di-tert-butyl-4-(3-(4-chlorophenyl)-4-methyl-4,5-dihydroisoxazol-5-yl)phenol is synthesized and studied by the single crystal X-ray diffraction method. The structure of the product was confirmed by IR, ¹H and ¹³C NMR spectroscopy. The crystal structure of 1,4-dioxane hemisolvate of the product is solved in the monoclinic space group P2₁/c with a = 17.713(6) Å, b = 9.529(3) Å, c = 13.972(4) Å, β = 94.09(4)°, V = 2352.3(13) ų, Z = 4, T = 120(2) K.     

Vinyl Ethers Containing an Epoxy Group: XXII. Synthesis and Base-Catalyzed Transformations of 1-(Allyloxy)- and 1-[2-(Vinyloxy)ethoxy]-3-(2-propynyloxy)propan-2-ols

Reactions of 2-(allyloxymethyl)- and 2-[2-(vinyloxy)ethoxy]methyloxiranes with 2-propynol (～3 wt % of t-BuOK, 75–85°C, 5–10 h) lead to formation of new 1-organyloxy-3-(2-propynyloxy)propan-2-ols (yield 65–95%). On heating to 45–100°C in the presence of bases (KOH, t-BuOK), 1-allyloxy- and 1-[2-(vinyloxy)ethoxy]-3-(2-propynyloxy)propan-2-ols are transformed into the corresponding 2-vinyl-1,3-dioxolane, 6-methyl-2,3-dihydro-1,4-dioxine, 6-methylene-1,4-dioxane, and 2,3-dihydro-5H-1,4-dioxepine derivatives, whose yield and ratio strongly depend on the solvent nature, catalyst, and substituent at the hydroxy group. 2-Vinyl-1,3-dioxolane and 6-methyl-2,3-dihydro-1,4-dioxine derivatives are formed as the major products (yield 70–99%) in the presence of t-BuOK in aprotic media (toluene, THF, DMSO) or in the absence of a solvent as a result of prototropic isomerization followed by intramolecular heterocyclization. Intramolecular nucleophilic cyclization of 3-(2-propynyloxy)propan-2-ols to 6-methylene-1,4-dioxane is the predominant process in water in the presence of KOH. In all cases, the fraction of 2,3-dihydro-5H-1,4-dioxepine derivatives among the cyclization products ranges from 0 to 5% (KOH) or to 14% (t-BuOK).     

Die Reaktion des Rhenium(VII)-oxides mit 1,4-Dioxan Re2O6(μ2-OH)2 · 3 C4H8O2 – ein neues Oxidhydroxid mit Metall-(1,4-Dioxan)-Bindung

Reaction of Rhenium(VII) Oxide with 1,4-Dioxane. Re₂O₆(μ₂-OH)₂ · 3 C₄H₈O₂— a Novel Oxide Hydroxide with Metal-(1,4-Dioxane) Bonds The reaction of Re₂O₇ with 1,4-dioxane in the presence of small amounts of H₂O yields the compound Re₂O₆(OH)₂ · 3(1,4-dioxane). It crystallizes in the triclinic space group P¯1 with a = 10.907(3), b = 12.875(4), c = 7.943(2) Å; α = 108.64(2), β = 103.00(2), γ = 102.29(2)°; Z = 2. The complete X-ray structure analysis (R = 2.9? ) shows the crystals to contain dimeric centrosymmetric Re₂O₆(OH)₂-units with two bridging μ₂-OH groups. The ligand spheres around Re are completed towards distorted octahedra by coordinated 1,4-dioxane molecules (one O donor per Re), the latter linking the dimeric units to endless chains. The rest of the 1,4-dioxane molecules are bonded to the OH-groups through hydrogen bridges and have no contact to Re. Mean bond distances are: Re? O(bridge) 2.065 (2.059…2.070(4)) Å, Re? O(1,4-dioxane) 2.478 (2.469 and 2.486(5)) Å, Re? O (terminal) 1.707 (1.694…1.720(5)) Å.     

重氮萘酮在环醚中热解反应研究

三种带有不同取代基的重氮萘酮(la～1c)在THF和二氧六环中加热分解给出不同的产物。1-重氮-4-萘酮(1a)的热解产物主要是重氮萘酮热解后产生的烯酮卡宾(2a)与环醚开环后形成的聚合物;3-甲基-1-重氮-4-萘酮(1b)的热解产物比较复杂,除冠醚类产物之外,还有烯酮卡宾对四氢呋喃和二氧六环的C-H键的插入反应产物、螺环化合物、2-甲基萘酚以及难以分离的聚合物;3-硝基-1-重氮-4-萘酮(1c)的热解产物主要是聚合物,此外还有少量C－H键的插入反应产物和2-硝基萘酚。对重氮萘酮热解反应的机理作了讨论。     

Synthesis and chromatographic enantioresolution of anti-HIV quinolone derivatives

The successful enantioseparation of five 6-desfluoroquinolones with three polysaccharide-based stationary phases (namely, the cellulose-based Chiralpak IB and the two amylose-based Chiralpak AD-H and Lux Amylose-2) is herein described. The investigated species differ for the nature of substituents and/or the position of the stereogenic centre on the quinolone scaffold.The effect on the enantioseparation performance exerted by the different morphology of the cellulose-based and amylose-based polymers, was systematically evaluated for all compounds. In this frame, the impact of alternative alcoholic (ethanol, 2-ethoxyethanol, methanol, 2-propanol) and acidic (acetic, methanesulfonic and trifluoroacetic acid) modifiers as well as of a “non-standard” solvent (chloroform), was investigated in normal phase conditions along with the stereo-electronic peculiarities of the selected polymers. While 7-[4-(1,3-benzothiazol-2-yl)-2-methyl-1-piperazinyl]-1-methyl-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylic acid (1) was enantioresolved with conventional normal-phase conditions by means of the largely employed amylose-based Chiralpak AD-H column, the recruitment of a bulky alcohol (2-ethoxyethanol) succeeded in the enantioresolution of 6-amino-1-methyl-7-[2-methyl-4-(2-pyridinyl)-1-piperazinyl]-4-oxo-1,4-dihydro-3-quinolinecarboxylic acid (2) and 6-amino-1-[1-(hydroxymethyl)propyl]-4-oxo-7-(4-pyridin-2-ylpiperazin-1-yl)-1,4-dihydroquinoline-3-carboxylic acid (3) with the same column. The use of the amylose-based Lux Amylose-2 column, carrying both an electro-withdrawing (chlorine) and an electro-donating (methyl) group on the carbamate residue, allowed to get 6-amino-1-methyl-4-oxo-7-[3-(2-pyridinyl)-1-pyrrolidinyl]-1,4-dihydro-3-quinolinecarboxylic acid hydrochloride (4) enanantioresolved, and 6-amino-1-methyl-4-oxo-7-(3-pyridin-2-ylpiperidin-1-yl)-1,4-dihydroquinoline-3-carboxylic acid (5) enantioseparated.     

Polymerization of phenylacetylene by WCl6·Ph4Sn: Synthesis of high polymer achieved by selection of solvents

Phenylacetylene was polymerized by WCl₆·Ph₄Sn (1:1) in 1,4-dioxane to provide in high yield a polymer whose molecular weight reached 1 × 10⁵. The polymerization also proceeded in other oxygen-containing solvents (ethers, esters, and ketones) but the polymer molecular weights were lower than 1 × 10⁴. Certain hydrocarbon solvents such as cyclohexene, tetralin, and indan also afforded high-molecular-weight polyphenylacetylene [M _n = (5–8) × 10⁴], as compared with those (M _n ≤ 1.5 × 10⁴) obtained in conventional aromatic hydrocarbons like benzene. A high polymer (M _n = 1.6 × 10⁵) was also formed from β-naphthylacetylene in 1,4-dioxane. It was inferred that the active hydrogens of these solvents prevent the formed polymer from being decomposed by a radical mechanism and/or modify the nature of active species.     

Cyclic voltammetry of Tifluadom at a C18-modified carbon-paste electrode

Tifluadom, N-[5-(2-fluorophenyl)-2,3-dihydro-methyl-1H-1,4-benzodiazepine]-2-4-methyl-3-thiophene carboxamide, was determined by using a carbon-paste electrode modified with C₁₈ μBondapak. Adsorption on the electrode served as a preconcentration step which improved the limit of detection. Preconcentration for 5 min (open circuit) gave a linear range of 2.2×10^?7 M?4.5×10^?6 M with a detection limit of 1.3×10^?7 M (%C₁₈=25, w/w) for Tifluadom in Britton-Robinson buffer pH 6. The determination of Tifluadom added to urine required no preliminary treatment; the detection limit was 1.3×10^?6 M.     

Synthesis and ring-opening polymerization of new 1,4-anhydro-glucopyranose derivatives

Three new 1,4-anhydro-glucopyranose derivatives having different hydroxyl protective groups such as 1,4-anhydro-2,3,6-tri-O-methyl-α-D -glucopyranose (AMGLU), 1,4-anhydro-6-O-benzyl-2,3-di-O-methyl-α-D -glucopyranose (A6BMG), and 1,4-anhydro-2,3-di-O-methyl-6-O-trityl-α-D -glucopyranose (A6TMG) were synthesized from methyl α-D -glucopyranoside in good yields. Their polymerizability was compared with that of 1,4-anhydro-2,3,6-tri-O-benzyl-α-D -glucopyranose (ABGLU) reported previously. The trimethylated monomer, AMGLU, was polymerized by a PF₅ catalyst to give 1,5-α-furanosidic polymer having number-average molecular weights (M̄_n) in the range of 2.8 × 10³ to 6.8 × 10³. The ¹³C-NMR spectrum was compared with that of methylated amylose and cellulose. Other anhydro monomers, A6BMG and A6TMG, gave the corresponding 1,5-α furanosidic polymers having M̄_n = 17.1 × 10³ and 1.8 × 10³, respectively. Thus, the substituents at the C2 and C6 positions were found to play an important role for the ring-opening polymerizability of the 1,4-anhydro-glucose monomers. In addition, debenzylation of the tribenzylated polymer gave free (1 → 5)-α-D -glucofuranan. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 841–850, 1998     

Zur Reaktion des Rhenium(VII)-oxids mit 1,4-Dioxan – Kristallstruktur von Re2O7(OH2)2 · 2(1,4-Dioxan)

Reaction of Rhenium(VII) Oxide with 1,4-Dioxane – Crystal Structure of Re₂O₇(OH₂)₂ · 2(1,4-Dioxane) By solvolysis of polymeric Re₂O₇ with 1,4-dioxane in the presence of small amounts of H₂O two products of compositions Re₂O₆(OH)₂ · 3(1,4-dioxane) ( 1 ) and Re₂O₇ · 2H₂O · 2(1,4-dioxane) ( 2 ) are formed. From a complete X-ray single-crystal structure analysis 2 could now be characterized structurally (monoclinic, space group P2₁/c, a = 6.828(3) Å, b = 9.530(2) Å, c = 26.421(8) Å, β = 91.71(3)°, Z = 4). The compound is important as a convenient precursor for the preparation of pure rhenium trioxide. It is to be formulated as Re₂O₇(OH₂)₂ · 2(1,4-dioxane) and contains, contrary to 1 , no 1,4-dioxane coordinated to Re. The crystalline phase consists of a supramolecular arrangement of Re₂O₇(OH₂)₂ units as in “solid perrhenic acid” and of 1,4-dioxane molecules associated through O? H …? O hydrogen bridges. Analogous to dirhenium heptoxide and to solid perrhenic acid one of the rhenium atoms is in tetrahedral, the other is in distorted octahedral coordination.     

Reactions of regioisomeric 3,3-dimethyl- and 2,2-dimethyl-6-trifluoromethyl-2,3-dihydro-4-pyrones with N-nucleophiles

Reactions of 2,2-dimethyl-6-trifluoromethyl-2,3-dihydro-4-pyrone with ethylenediamine, hydrazine, or hydroxylamine yield 5-methyl-7-trifluoromethyl-2,3-dihydro-1H-1,4-diazepine, 3(5)-(2-hydroxy-2-methylpropyl)-5(3)-trifluoromethylpyrazole, and 5-hydroxy-3-(2-hydroxy-2-methylpropyl)-5-triflouromethyl-Δ², respectively. The same compounds were obtained from 2-amino-1,1,1-trifluoro-6-hydroxy-6-methylhept-2(Z)-en-4-one and 2-hydroxy-6, 6-dimethyl-2-trifluoromethyltetrahydro-4-pyrone.     

Lead tetraacetate assisted formation of bis(acetoxy)acetic acid derivative from carvone

R-Carvone on heating with Pb(OAc)₄ in benzene gives (2RS)-2-hydroxy-2-[(1S)-4-methyl-5-oxocyclohex-3-en-1-yl)]-prop-1-yl bis(acetoxy)acetate. Alkaline hydrolysis of this compound affords the corresponding diol which under acidic catalysis is transformed into bis-hydroxy ether and 1,4-dioxane derivatives.     

Rearrangement of 1,4-benzodiazepin-2,4-diones to 3,l-benzoxazin-4-ones

Treatment of 7-chloro-3,4-dihydro-1H-1,4-benzodiazepin-2,5-dione (Ia) with refluxing acetic anhydride in the presence of pyridine afforded 6-chloro-2-methyl-4H-3,1-benzoxazin-4-one (IIa). A plausible reaction path for this novel rearrangement reaction is described: Ia → 4-acetyl-7-chloro-3,4-dihydro-lH-1,4-benzodiazepin-2,5-dione → 7-chloro-1,4-diacetyl-3,4-dihydro-lH-1,4-benzodiazepin-2,4-dione → IIa. When 7-chloro-3,4-dihydro-4-methyl-lH-1,4-benzodiazepin-2,5-dione (Ib), 3,4-dihydro-4-methyl-1H-1,4-benzodiazepin-2,5-dione (Id) and 3,4-dihydro-1-methyl-1H-1,4-benzodiazepin-2,5-dione (Ie) were allowed to react with acetic anhydride under conditions similar to those used for the rearrangement reaction, only acetylation occurred.     

Novel fluoro-substituted benzo- and benzothieno fused pyrano[2,3-c]pyrazol-4(1H)-ones

A straightforward, two-step synthesis of fluoro substituted chromeno[2,3-c]pyrazol- and [1]benzothieno[2′,3′:5,6]pyrano[2,3-c]pyrazol-4(1H)-ones, respectively, is presented. Hence, treatment of 1-substituted or 1,3-disubstituted 2-pyrazolin-5-ones with fluoro substituted 2-fluorobenzoyl chlorides or 3-chloro-6-fluoro-1-benzothiophene-2-carbonyl chloride using calcium hydroxide in refluxing 1,4-dioxane gave the corresponding 4-aroylpyrazol-5-ols, which were cyclized into the fused ring systems. 5-Fluorochromeno[2,3-c]pyrazol-4(1H)-one was obtained upon treatment of the 1-(4-methoxybenzyl) protected congener with trifluoroacetic acid. Treatment of 5-fluorochromeno[2,3-c]pyrazol-4(1H)-ones with methylhydrazine afforded novel tetracyclic ring systems such as 2-methyl-7-phenyl-2,7-dihydropyrazolo[4′,3′:5,6]pyrano[4,3,2-cd]indazole. Detailed NMR spectroscopic investigations (¹H, ¹³C, ¹⁵N, ¹⁹F) with the obtained compounds were undertaken.     

Determination of midazolam and its major hydroxy metabolite in plasma by gas liquid chromatography. Application to a pharmacokinetic study

A sensitive gas liquid chromatographic (GLC) assay was developed for plasma determinations of 8-chloro-6-(2′ -fluorophenyl)-1-methyl-4H-imidazo[1,5 α][1,4]benzodiazepine (compound I) and its hydroxymethylimidazo metabolite (compound II). The internal standards used were 8-chloro-6-(2′ -chlorophenyl)-1 -methyl-4H-imidazo[1,5 α][1,4]benzodiazepine (compound VI) and 7-chloro-5-(2′ -fluorophenyl)-1, 3-dihydro-1-(hydroxyethyl)-2H-1,4-benzodiazepin-2-one (compound VII) for compounds I and II, respectively. Following extraction, and silylation for compound II, compounds I and II were analyzed by GLC using a glass column packed with 5% OV-101 on Gas-Chrom Q, and a ⁶³Ni electron-capture detector. The GLC method was validated by a CI-GC/MS technique. The detection limit of the assay is approximately 4–5 ng/ml for compound I and 3 ng/ml for compound II. The method was used in comparative pharmacokinetic studies of the distribution of the two compounds in arterial and venous blood.     

Investigations toward the total syntheses of proapoiphine and homoproaporphine alkaloids

The reaction of 1,2,3,5-telrahydro-6-methoxy-1 -[2-(4-methoxy-1,4-eyelohexadien-1 -yl)eth-yl]-l-methyl-7-isoquinolinol ( 12 ) with hot phosphoric acid afforded (±)-tetrahydro-homoglazio-vine ( 14 ) in good yield. Similar treatment of 1,2,3,4-tetrahydro-6-methoxy-l -[2-(4-methoxy-1,4-cyelohexadien-l-yl)methyl]-2-methyl-7-isoquinolinol ( 13 ) did not produce the desired (±)-tetra-hydroglaziovine ( 18 ) but rather a mixture of diastereomeric 4,5,6,6a?,7,7a?,8,9,11, 11a?-deca-hydro-l-hydroxy-2-metlu>xy-6-methyl-10H-dibenzo[(de,g]quinolin-l-ones (16 and 17) was obtained.     

Reactions of 5-oxo-1-phenylpyrrolidine-3-carbohydrazides with 1,4-naphthoquinone derivatives and the properties of the obtained products

N′-(4-Oxo-1,4-dihydronaphthalen-1-ylidene)-1-phenyl-5-oxopyrrolidine-3-carbohydrazides and N′-(3-methyl-4-oxo-1,4-dihydronaphthalen-1-ylidene)-1-phenyl-5-oxopyrrolidine-3-carbohydrazides were synthesized by reactions of 5-oxo-1-phenylpyrrolidine-3-carbohydrazides with 1,4-naphthoquinone or 2-methyl-1,4-naphthoquinone. The alkylated analogues of the above products were obtained using ethyl iodide. The interaction of 5-oxo-1-phenylpyrrolidine-3-carbohydrazides with 2,3-dichloro-1,4-naphthoquinone was followed by formation of N′-(3-chloro-1,4-dioxo-1,4-dihydronaphthalen-2-yl)-1-phenyl-5-oxopyrrolidine-3-carbohydrazides. All these compounds were characterized using ¹H, ¹³C NMR, IR and mass spectra. Some of the new compounds were tested for the antimicrobial and antifungal activity.