Total synthesis of cruentaren B

A convergent total synthesis of the cytotoxic natural product cruentaren B is completed in 26 steps (longest linear sequence) with an overall yield of 7.1%. For the construction of the C1-C11 benzolactone fragment of the molecule, the key steps used were O-methylation, using a Mitsunobu reaction, a Stille coupling method to construct the C7-C8 bond, and a Brown's asymmetric crotylboration reaction for the direct enantioselective installation of the two chiral centers present in this fragment. For diastereoselective installation of the chiral centers in the C12-C20 polyketide fragment, an Evans syn aldol reaction on a chiral aldehyde, derived from methyl (R)-3-hydroxyl-2-methylpropionate, and subsequently a Mukaiyama aldol reaction were employed. For the construction of the C21-C28 tail, a "non-Evans" syn aldol reaction was used. The three fragments were coupled by an SN2 reaction and a Wittig olefination reaction followed by standard functional group manipulations to furnish the target molecule.     

Total synthesis of (-)-hennoxazole A

An enantioselective, convergent, total synthesis of the antiviral marine natural product (-)-hennoxazole A has been completed in 17 steps, longest linear sequence, from serine methyl ester and in 9 steps from an achiral bisoxazole intermediate. Elaboration of a thiazolidinethione allowed for rapid assembly of the pyran-based ring system. Key late-stage coupling was effected by deprotonation of the bisoxazole methyl group, followed by alkylation with an allylic bromide side chain segment. [structure: see text]     

Cα-Cβ chromophore bond dissociation in protonated tyrosine-methionine, methionine-tyrosine, tryptophan-methionine, methionine-tryptophan and their sulfoxide analogs

C(α)-C(β) chromophore bond dissociation in some selected methionine-containing dipeptides induced by UV photons is investigated. In methionine containing dipeptides with tryptophan as the UV chromophore, the tryptophan side chain is ejected either as an ion or as a neutral fragment while in dipeptides with tyrosine, the tyrosine side chain is lost only as a neutral fragment. Mechanisms responsible for these fragmentations are proposed based on measured branching ratios and fragmentation times, and on the results of DFT/B3-LYP calculations. It appears that the C(α)-C(β) bond cleavage is a non-statistical dissociation for the peptides containing tyrosine, and occurs after internal conversion for those with tryptophan. The proposed mechanisms are governed by the ionization potential of the aromatic side chain compared to that of the rest of the molecule, and by the proton affinity of the aromatic side chain compared to that of the methionine side chain. In tyrosine-containing peptides, the presence of oxygen on sulfur of methionine presumably reduces the ionization potential of the peptide backbone, facilitating the loss of the side chain as a neutral fragment. In tryptophan-containing peptides, the presence of oxygen on methionyl-sulfur expedites the transfer of the proton from the side chain to the sulfoxide, which facilitates the loss of the neutral side chain.     

Asymmetric total synthesis of spongistatins 1 and 2

The total synthesis of spongistatin 1 (1) and spongistatin 2 (2) has been achieved through an advanced-stage intermediate. The synthesis is highlighted by a highly convergent assembly of the four key fragments (the C1-C15 AB fragment 2, the C16-C28 CD fragment 3, the C29-C43 EF fragment 4, and the C44-C51 side chain 5) at a very advanced stage of the synthesis with minimal functional group interconversion. The CD fragment 3 functions as the central building block to which the other fragments are attached. The synthesis of the AB and CD spiroketal fragments is accomplished through the addition of a metalated gamma-pyrone to a beta-alkoxy aldehyde followed by spiroketalization. The EF subunit was assembled with high diastereoselectivity relying on asymmetric aldol reactions of chlorotitanium enolates of N-propionyl oxazolidinethiones and a double diastereoselective boron aldol to join the E and F fragments. Wittig coupling of the CD and EF fragments followed by a diastereoselective aldol reaction between the CDEF ketone and an AB aldehyde set the stage for attachment of the C44-C51 side chains and final macrolactonization and deprotection.     

The first total synthesis of concanamycin f (concanolide a)

A highly stereoselective total synthesis of the macrolide antibiotic concanamycin F (1), a specific and potent inhibitor of vacuolar H(+)-ATPase, has been achieved by a convergent route involving the synthesis and coupling of its 18-membered tetraenic lactone and beta-hydroxyl hemiacetal side chain subunits. The C1-C19 18-membered lactone aldehyde 4 was synthesized through the intermolecular Stille coupling of the C5-C13 vinyl iodide 24 and the C14-C19 vinyl stannane 25, followed by construction of the C1-C4 diene and macrolactonization. Synthesis of 4 via a second convergent route including the esterification of the C1-C13 vinyl iodide 45 and the C14-C19 vinyl stannane 47 followed by the intramolecular Stille coupling was also realized. The highly stereoselective aldol coupling of 4 and the C20-C28 ethyl ketone 5 followed by desilylation provided 1 which was identical with natural concanamycin F.     

The stereocontrolled total synthesis of spirastrellolide A methyl ester. Expedient construction of the key fragments

Due to a combination of their promising anticancer properties, limited supply from the marine sponge source and their unprecedented molecular architecture, spirastrellolides represent attractive and challenging synthetic targets. A modular strategy for the synthesis of spirastrellolide A methyl ester, which allowed for the initial stereochemical uncertainties in the assigned structure was adopted, based on the envisaged sequential coupling of a series of suitably functionalised fragments; in this first paper, full details of the synthesis of these fragments are described. The pivotal C26-C40 DEF bis-spiroacetal was assembled by a double Sharpless asymmetric dihydroxylation/acetalisation cascade process on a linear diene intermediate, configuring the C31 and C35 acetal centres under suitably mild acidic conditions. A C1-C16 alkyne fragment was constructed by application of an oxy-Michael reaction to introduce the A-ring tetrahydropyran, a Sakurai allylation to install the C9 hydroxyl, and a 1,4-syn boron aldol/directed reduction sequence to establish the C11 and C13 stereocentres. Two different coupling strategies were investigated to elaborate the C26-C40 DEF fragment, involving either a C17-C25 sulfone or a C17-C24 vinyl iodide, each of which was prepared using an Evans glycolate aldol reaction. The remaining C43-C47 vinyl stannane fragment required for introduction of the unsaturated side chain was prepared from (R)-malic acid.     

Studies on the synthesis of apoptolidin: synthesis of a C1-C27 fragment of apoptolidin D

Synthesis of a C(1)-C(27) fragment, a key intermediate in the synthesis of apoptolidin D, is reported. The synthesis involves a combination of Heck coupling and Horner-Wadsworth-Emmons reaction for the C(1)-C(7) trienoate portion and an efficient Suzuki cross-coupling protocol for the C(10)-C(13) diene portion.     

Asymmetric synthesis of the highly potent anti-metastatic prostacyclin analogue cicaprost and its isomer isocicaprost

An asymmetric synthesis of the anti-metastatic prostacyclin analogue cicaprost and a formal one of its isomer isocicaprost by a new route are described. A key step of these syntheses is the coupling of a chiral bicyclic C6-C14 ethynyl building block with a chiral C15-C21 omega-side chain amide building block with formation of the C14-C15 bond of the target molecules. A highly stereoselective reduction of the thereby obtained C6-C21 intermediate carrying a carbonyl group at C15 of the side chain was accomplished by the chiral oxazaborolidine method. The chiral phosphono acetate method was used for the highly stereoselective attachment of the alpha-side chain to the bicyclic C6-C21 intermediate carrying a carbonyl group at C6. Asymmetric syntheses of the bicyclic C6-C14 ethynyl building blocks were carried out starting from achiral bicyclic C6-C12 ketones by using the chiral lithium amide method. In the course of these syntheses, a new method for the introduction of an ethynyl group at the alpha-position of the carbonyl group of a ketone with formation of the corresponding homopropargylic alcohol was devised. Its key steps are an aldol reaction of the corresponding silyl enol ether with chloral and the elimination of a trichlorocarbinol derivative with formation of the ethynyl group. In addition, a new aldehyde to terminal alkyne transformation has been realized. Its key steps are the conversion of an aldehyde to the corresponding 1-alkenyl dimethylaminosulfoxonium salt and the elimination of the latter with a strong base. Two basically different routes have been followed for the synthesis of the enantiomerically pure C15-C21 omega-side chain amide building block. The first is based on the chiral oxazolidinone method and features a highly stereoselective alkylation of (4R)-N-acetyl-4-benzyloxazolidin-2-one, and the second encompasses a malonate synthesis of the racemic amide and its efficient preparative scale resolution by HPLC on a chiral stationary phase containing column.     

Efficient stereochemical relay en route to leucascandrolide A

[structure: see text]. A complete relay of the initial stereochemical information is central to the efficient and highly stereocontrolled construction of the C1-C15 fragment of the marine macrolide leucascandrolide A. Cyclic silane 3, assembled via Pt-catalyzed hydrosilylation, was designed to serve as a temporary template for the installation of the C12 stereogenic center. The strategy features a highly convergent C10-C11 bond construction via 1,5-anti-selective aldol reaction and rapid assembly of the trisubstituted pyran subunit via Prins desymmetrization.     

Conformations of alpha-aminobutyric acid in the gas phase.

A laser-ablation molecular-beam Fourier transform microwave (LA-MB-FTMW) spectrometer has been successfully applied to the structural study of alpha-aminobutyric acid. Three neutral conformers have been identified in the gas phase by comparing their experimental rotational and 14N nuclear quadrupole coupling parameters with those predicted by ab initio calculations at the MP2/6-311++G(d,p) level. The most stable conformer is stabilized by a bifurcated amine-to-carbonyl hydrogen bond (N--HO=C) and a cis-COOH group, and the side-chain adopts a configuration with a torsion angle tau(C(gamma)-C(beta)-C(alpha)-C') of about 180 degrees. The second most stable conformer exhibits the same configuration for the amino acid skeleton but adopts a different orientation for the side chain with tau(C(gamma)-C(beta)-C(alpha)-C') approximately -60 degrees. In the third conformer an intramolecular hydrogen bond is established between the hydroxyl group and the nitrogen atom (NH--O), with a side-chain orientation similar to that of the most stable conformer.     

Total synthesis of the epidermal growth factor inhibitor (-)-reveromycin B

The total synthesis of the epidermal growth factor inhibitor reveromycin B (2) in 25 linear steps from chiral methylene pyran 13 is described. The key steps involved an inverse electron demand hetero-Diels-Alder reaction between dienophile 13 and diene 12 to construct the 6,6-spiroketal 11 which upon oxidation with dimethyldioxirane and acid catalyzed rearrangement gave the 5,6-spiroketal aldehyde 9. Lithium acetylide addition followed by oxidation/reduction and protective group manipulation provided the reveromycin B spiroketal core 8 which was converted into the reveromycin A (1) derivative 6 in order to confirm the stereochemistry of the spiroketal segment. Introduction of the C1-C10 side chain began with sequential Wittig reactions to form the C8-C9 and C7-C6 bonds, and a tin mediated asymmetric aldol reaction installed the C4 and C5 stereocenters. The final key steps to the target molecule 2 involved a Stille coupling to introduce the C21-C22 bond, succinoylation, selective deprotection, oxidation, and Wittig condensation to form the final C2-C3 bond. Deprotection was effected by TBAF in DMF to afford reveromycin B (2) in 72% yield.     

The shape of leucine in the gas phase.

Two structures of neutral leucine are detected in the jet-cooled rotational spectrum of a laser-ablation molecular-beam Fourier transform microwave (LA-MB-FTMW) experiment. The comparison between the experimental rotational and (14)N nuclear quadrupole coupling constants and those calculated ab initio provides conclusive evidence for the identification of the conformers. The most stable species is stabilized by a N-H...O=C intramolecular hydrogen bond and a cis-COOH interaction, while a higher-energy conformer exhibits a N...H-O intramolecular hydrogen bond and trans-COOH, as in lower aliphatic amino acids. The isobutyl side chain adopts the same configuration in the two conformers of leucine, characterized by a trans arrangement of the C'-C(alpha)-C(beta)-C(gamma)-C(delta) chain. The differences with the preferred side chain configurations observed in valine and isoleucine are discussed.     

Multigram synthesis of the C29-C51 subunit and completion of the total synthesis of altohyrtin C (spongistatin 2)

A multigram synthesis of the C29-C51 subunit of altohyrtin C (spongistatin 2) has been accomplished. Union of this intermediate with the C1-C28 fragment and further elaboration furnished the natural product. Completion of the C29-C51 subunit began with the aldol coupling of the boron enolate derived from methyl ketone 8 and aldehyde 9. Acid-catalyzed deprotection/cyclization of the resulting diastereomeric mixture of addition products was conducted in a single operation to afford the E-ring of altohyrtin C. The diastereomer obtained through cyclization of the unwanted aldol product was subjected to an oxidation/reduction sequence to rectify the C35 stereocenter. The C45-C48 segment of the eventual triene side chain was introduced by addition of a functionalized Grignard reagent derived from (R)-glycidol to a C44 aldehyde. Palladium-mediated deoxygenation of the resulting allylic alcohol was followed by adjustment of protecting groups to provide reactivity suitable for the later stages of the synthesis. The diene functionality comprising the remainder of the C44-C51 side chain was constructed by addition of an allylzinc reagent to the unmasked C48 aldehyde and subsequent dehydration of the resulting alcohol. Completion of the synthesis of the C29-C51 subunit was achieved through conversion of the protected C29 alcohol into a primary iodide. The synthesis of the C29-C51 iodide required 44 steps with a longest linear sequence of 33 steps. From commercially available tri-O-acetyl-d-glucal, the overall yield was 6.8%, and 2 g of the iodide was prepared. The C29-C51 primary iodide was amenable to phosphonium salt formation, and the ensuing Wittig coupling with a C1-C28 intermediate provided a fully functionalized, protected seco-acid. Selective deprotection of the required silicon groups afforded an intermediate appropriate for macrolactonization, and, finally, global deprotection furnished altohyrtin C (spongistatin 2). This synthetic approach required 113 steps with a longest linear sequence of 37 steps starting from either tri-O-acetyl-d-glucal or (S)-malic acid.     

Synthesis of the C15-C35 northern hemisphere subunit of the chivosazoles

An advanced C15-C35 subunit of the chivosazole polyene macrolides was prepared in a convergent manner, exploiting boron-mediated aldol reactions for the stereocontrolled construction of the C15-C26 and C27-C35 segments, followed by their Pd/Cu-promoted Stille coupling to configure the signature (23E,25E,27Z)-triene motif. Correlation with a known C28-C35 degradation fragment of chivosazole A was also achieved.     

Convergent assembly of the spiroacetal subunit of didemnaketal B

A highly convergent synthesis of the C9-C28 spiroacetal subunit of didemnaketal B has been accomplished. Assembly of the C9-C15 alkylborate and C16-C21 enol phosphate by means of Suzuki-Miyaura coupling and acid-catalyzed cyclization of the derived dihydroxy enol ether enabled a rapid and efficient construction of the spiroacetal subunit. The C22-C28 side chain was incorporated via Nozaki-Hiyama-Kishi coupling to complete the synthesis.     

Towards the total synthesis of amphidinolide E: an enantioselective synthesis of C12-C29 fragment

An enantioselective synthesis of the C12-C29 fragment of amphidinolide E is described. Key transformations include an intramolecular mercuriocyclization reaction, stereoselective introduction of methyl group at the C2 position, and Stille coupling for the introduction of the diene side chain.     

The stereocontrolled total synthesis of spirastrellolide A methyl ester. Fragment coupling studies and completion of the synthesis

The spirastrellolides are a novel family of structurally unprecedented marine macrolides which show promising anticancer properties due to their potent inhibition of protein phosphatase 2A. In the preceding paper, a modular strategy for the synthesis of spirastellolide A methyl ester which allowed for the initial stereochemical uncertainties was outlined, together with the synthesis of a series of suitably functionalised fragments. In this paper, the realisation of this synthesis is described. Two alternative coupling strategies were explored for elaborating the C26-C40 DEF bis-spiroacetal fragment: a modified Julia olefination of a C26 aldehyde with a C17-C25 sulfone, and a Suzuki coupling of a C25 trialkylborane with a C17-C24 vinyl iodide, which also required the development of a double hydroboration reaction to install the C23/C24 stereocentres. The latter proved a significantly superior strategy, and was fully optimised to provide a C17 aldehyde which was coupled with a C1-C16 alkyne fragment to afford the C1-C40 carbon framework. The BC spiroacetal was then installed within this advanced intermediate by oxidative cleavage of two PMB ethers with spontaneous spiroacetalisation, which also led to unanticipated deprotection of the C23 TES ether. The ensuing truncated seco-acid was cyclised in high yield to construct the 38-membered macrolactone under Yamaguchi macrolactonisation conditions, suggesting favourable conformational pre-organisation. Exhaustive desilylation provided a crystalline macrocyclic pentaol, revealing much about the likely conformation of the macrolactone in solution. Attachment of the remainder of the side chain proved challenging, potentially due to steric hindrance by this macrocycle; an olefin cross-metathesis to install an electrophilic allylic carbonate and subsequent π-allyl Stille coupling with a C43-C47 stannane achieved this goal. Global deprotection completed the first total synthesis of (+)-spirastrellolide A methyl ester which, following detailed NMR correlation with an authentic sample, validated the full configurational assignment. A series of simplified analogues of spirastrellolide incorporating the C26-C47 region were also prepared by π-allyl Stille coupling reactions.     

Studies in macrolide antibiotic synthesis: the role of tethered alkoxides in titanium alkoxide-mediated regioselective reductive coupling reactions

[reaction: see text] A convergent route to a C1-C15 fragment precursor for erythromycin-based macrolide antibiotics is presented. These studies define a role for tethered alkoxides in the control of site-selective carbon-carbon bond formation in titanium alkoxide-mediated coupling reactions of internal alkynes and chiral aldehydes.     

Toward the second generation synthesis of aplyronine A: stereocontrolled assembly of the C1-C19 segment by using an asymmetric Nozaki-Hiyama-Kishi coupling

An efficient synthesis of the C1-C19 segment of aplyronine A is described. Stereoselective construction of the C14-C15 (E)-trisubstituted double bond and the C13 stereocenter was achieved by using an asymmetric Nozaki-Hiyama-Kishi coupling.     

Stereoselective synthesis of the C(1)-C(19) fragment of tetrafibricin

[reaction: see text] A stereoselective synthesis of the C(1)-C(19) fragment of tetrafibricin has been accomplished via a highly diastereoselective double allylboration reaction of 6-8 and an iodonium ion promoted urethane cyclization for the installation of the C(15) alkoxy function in 3.