A XANES characterization of structural defects in single-walled carbon nanotubes

Structural defects play an important role in the physics of carbon nanototube. However, very few investigations of the structural changes induced by purifying process and other treatments have been performed by means of X-ray absorption near-edge structure (XANES) spectroscopy. We used XANES spectroscopy to detect the presence of defects induced in single-walled carbon nanotubes (SWNTs) by nitric acid treated processes and by an Ar⁺ ion bombardment. The relationship between the features in XANES spectrum and the structural defects has been discussed systematically. Data also addresses evidence of oxygen effect induced by aging on nanotubes.     

Bioelectrochemical single-walled carbon nanotubes

Metalloproteins and enzymes can be immobilized on SWNTs of different surface chemistry. The combination of high surface area, robust immobilization and inherent nanotube electrochemical properties is of promising application in bioelectrochemistry.     

Soluble ultra-short single-walled carbon nanotubes

Soluble, ultra-short (length < 60 nm), carboxylated, single-walled carbon nanotubes (SWNTs) have been prepared by a scalable process. This process, predicated on oleum's (100% H2SO4 with excess SO3) ability to intercalate between individual SWNTs inside SWNT ropes, is a procedure that simultaneously cuts and functionalizes SWNTs using a mixture of sulfuric and nitric acids. The solubility of these ultra-short SWNTs (US-SWNTs) in organic solvents, superacid and water is about 2 wt %. The availability of soluble US-SWNTs could open opportunities for forming high performance composites, blends, and copolymers without inhibiting their processibility.     

The reactivity of defects at the sidewalls of single-walled carbon nanotubes: the Stone-Wales defect

The reactivity of 5/7/7/5 (Stone-Wales, SW) defects is compared to that of the pristine sidewalls of (5,5) and (10,0) carbon nanotubes (CNTs) using density functional theory (PBE). Infinite tube models (periodic boundary conditions) are used to investigate the reaction energy for CH(2) addition to the ten [5,6], [5,7], [6,7], and [7,7] C-C junctions resulting from SW rotations of the two unique bonds in (5,5) and (10,0) CNTs. In all cases, at least one of the junctions associated with the SW defects is more highly reactive than the pristine tubes. The orientation of these junctions with respect to the tube axis mainly determines the exothermicity. The [7,7] junctions are not the most reactive sites in SW defects of (5,5) and (10,0) CNTs.     

Functional macromolecules from single-walled carbon nanotubes: synthesis and photophysical properties of short single-walled carbon nanotubes functionalised with 9,10-diphenylanthracene

9,10-Diphenylanthracene (DPA), a well-studied organic chromophore (Phi(fl) = 0.98) that exhibits electroluminescence, has been covalently bound through 2-(ethylthio)ethylamido linkers to the carboxylic acid groups of short, soluble single-walled carbon nanotubes (sSWNTs) of 1 microm average length, and the resulting DPA-functionalised sSWNT (DPA- sSWNT) macromolecular adducts (4.6 wt % DPA content) characterised by solution (1)H NMR, Raman and IR spectroscopy and thermogravimetric analysis. Comparison of the quenching of DPA fluorescence (steady-state and time-resolved) and of the transient optical spectra of sSWNTs and DPA-sSWNTs show that the covalent linkage boosts the interaction between the DPA and the sSWNT units. DPA-sSWNTs exhibit emission in the near-IR region from 1100-1400 nm with an enhanced quantum yield (Phi = 5.7x10(-3)) compared with sSWNTs (Phi = 3.9x10(-3)).     

Bare gold nanoparticles mediated surface-enhanced Raman spectroscopic determination and quantification of carboxylated single-walled carbon nanotubes

The paper proposes a simple and portable approach for the surface enhanced Raman scattering (SERS) spectroscopy in situ determination of carboxylated single walled carbon nanotubes (SWNTs) in river water samples. The method is based on the subsequent microfiltration of a bare gold nanoparticles solution and the water sample containing soluble carbon nanotubes by using a home-made filtration device with a small filtration diameter. An acetate cellulose membrane with a pore size of 0.2 μm first traps gold nanoparticles to form the SERS-active substrate and then concentrates the carbon nanotubes. The measured SERS intensity data were closely fit with a Langmuir isotherm. A portable Raman spectrometer was employed to measure SERS spectra, which enables in situ determination of SWNTs in river waters. The limit of detection was 10 μg L⁻¹. The precision, for a 10 mg L⁻¹ concentration of carbon nanotubes, is 1.19% intra-membrane and 10.5% inter-membrane.     

Interaction of a transition metal atom with intrinsic defects in single-walled carbon nanotubes

Interaction of a transition metal atom with defects in single-walled carbon nanotubes (SWNTs) were investigated through density functional theory calculations. For three kinds of intrinsic defects (single vacancies, double vacancies and Stone-Wales defects) in (5,5) armchair and (10,0) zigzag SWNTs, stable configurations were analyzed. The orientation of the specific bonds of the defects is related to the most stable configuration among several possible configurations. The stable adsorption sites and binding energies of a Ni atom on three intrinsic defects were calculated and compared to those on perfect side walls. All defects enhance Ni adsorption, and the single vacancy shows the most exothermic binding. These results shed light on the nature of the interaction of the transition metal with defects in SWNT, an important topic to the many aspects of carbon nanotubes interacting with transition metals. Particularly, this is useful for the fabrication of nanosized transition metal particles supported on carbon nanotubes.     

Protein-assisted solubilization of single-walled carbon nanotubes

We report a simple method that uses proteins to solubilize single-walled carbon nanotubes (SWNTs) in water. Characterization by a variety of complementary techniques including UV-Vis spectroscopy, Raman spectroscopy, and atomic force microscopy confirmed the dispersion at the individual nanotube level. A variety of proteins differing in size and structure were used to generate individual nanotube solutions by this noncovalent functionalization procedure. Protein-mediated solubilization of nanotubes in water may be important for biomedical applications. This method of solubilization may also find use in approaches for controlling the assembly of nanostructures, and the wide variety of functional groups present on the adsorbed proteins may be used as orthogonal reactive handles for the functionalization of carbon nanotubes.     

Discrete dispersion of single-walled carbon nanotubes

Single-walled carbon nanotubes (SWNTs) have been effectively wetted and dispersed in saturated sodium hydroxide (NaOH) alcohol-water solutions with little surface damage or shortening of the tubes; the treated material was dissolvable as individual tubes in many common organic solvents.     

Infrared spectroscopy of single-walled carbon nanotubes

By using the spectral moments method, we calculate the infrared spectra of chiral and achiral single-walled carbon nanotubes (SWCNTs) of different diameters and lengths. We show that the number of the infrared modes, their frequencies, and intensities depend on the length and chirality of the nanotubes. Furthermore, the dependence of the infrared spectrum as a function of the size of the SWCNT bundle is analyzed. These predictions are useful to interpret the experimental infrared spectra of SWCNTs.     

Stability of supershort single-walled carbon nanotubes

How short can single-walled carbon nanotubes (SWNTs) be? How stable are such supershort SWNTs (ss-SWNTs)? This work is the first to address these questions. On the basis of binding energy (E(B)), standard heats of formation , and strain energy (E(S)), we found that SWNTs with only one benzene ring in the axial direction, which we refer to as supershort SWNTs (ss-SWNTs), can be thermodynamically stable. On the basis of the data of E(B), , and E(S), the relative stabilities of ss-SWNTs, fullerenes, polycyclic aromatic hydrocarbons, and butadiyne are discussed. This study has laid a theoretical foundation for the possible synthesis of ss-SWNTs.     

Fluorimetric characterization of single-walled carbon nanotubes

Single-walled carbon nanotubes (SWCNTs) are a family of structurally related artificial nanomaterials with unusual properties and many potential applications. Most SWCNTs can emit spectrally narrow near-IR fluorescence at wavelengths that are characteristic of their precise diameter and chiral angle. Near-IR fluorimetry therefore offers a powerful approach for identifying the structural species present in SWCNT samples. Such characterization is increasingly important for nanotube production, study, separation, and applications. General-purpose and specialized instruments suitable for SWCNT fluorimetric analysis are described, and methods for interpreting fluorimetric data to deduce the presence and relative abundances of different SWCNT species are presented. Fluorescence methods are highly effective for detecting SWCNTs in challenging samples such as complex environmental or biological specimens because of the methods’ high sensitivity and selectivity and the near absence of interfering background emission at near-IR wavelengths. Current limitations and future prospects for fluorimetric characterization of SWCNTs are discussed.     

Long super-bundles of single-walled carbon nanotubes

200 nm-thick super bundles showing a novel polygonization and densely aligned arrangement are found in long single-walled carbon nanotube (SWNT) strands prepared by the vertical floating catalytic method.     

Interactions between single-walled carbon nanotubes and lysozyme

Dispersions of single-walled and non-associated carbon nanotubes in aqueous lysozyme solution were investigated by analyzing the stabilizing effect of both protein concentration and pH. It was inferred that the medium pH, which significantly modifies the protein net charge and (presumably) conformation, modulates the mutual interactions with carbon nanotubes. At fixed pH, in addition, the formation of protein/nanotube complexes scales with increasing lysozyme concentration. Electrophoretic mobility, dielectric relaxation and circular dichroism were used to determine the above features. According to circular dichroism, lysozyme adsorbed onto nanotubes could essentially retain its native conformation, but the significant amount of free protein does not allow drawing definitive conclusions on this regard. The state of charge and charge distribution around nanotubes was inferred by combining electrophoretic mobility and dielectric relaxation methods. The former gives information on changes in the surface charge density of the complexes, the latter on modifications in the electrical double layer thickness around them. Such results are complementary each other and univocally indicate that some LYS molecules take part to binding. Above a critical protein/nanotube mass ratio, depletion phenomena were observed. They counteract the stabilization mechanism, with subsequent nanotube/nanotube aggregation and phase separation. Protein-based depletion phenomena are similar to formerly reported effects, observed in aqueous surfactant systems containing carbon nanotubes.     

Lithium storage in single-walled carbon nanotubes

Here, we investigated the lithium insertion/extraction mechanism in single-walled carbon nanotubes (SWNTs) based both on the empty SWNTs and filled SWNTs, including ferrocene-filled SWNTs (Fc@SWNTs) and C₆₀-filled SWNTs (C₆₀@SWNTs). SWNTs, C₆₀@SWNTs and Fc@SWNTs were systematically investigated as anode materials for Li-ion batteries. The electrochemical performance of the C₆₀@SWNT electrode was slightly better than that of the SWNTs, and the reversible capacity of Fc@SWNTs per unit weight was ～1.7 times greater than that of the empty SWNTs due to its special tube internal structure. It was proved that the dominant reversible sites for lithium storage in empty SWNTs are the trigonal interstitial channels. Meanwhile, lithium can reversibly insert or extract the inner channels of the tubes after doping with ferrocene; the reversible capacity presented in the inner channels of Fc@SWNTs is about Li_1.13C₆.     

Coating single-walled carbon nanotubes with phospholipids

Single-walled carbon nanotubes (SWNTs), being hydrophobic by nature, aggregate in water to form large bundles. However, isolated SWNTs possess unique physical and chemical properties that are desirable for sensing and biological applications. Conventionally isolated SWNTs can be obtained by wrapping the tubes with biopolymers or surfactants. The binding modes proposed for these solubilization schemes, however, are less than comprehensive. Here we characterize the efficacies of solubilizing SWNTs through various types of phospholipids and other amphiphilic surfactants. Specifically, we demonstrate that lysophospholipids, or single-chained phospholipids offer unprecedented solubility for SWNTs, while double-chained phospholipids are ineffective in rendering SWNTs soluble. Using transmission electron microscopy (TEM) we show that lysophospholipids wrap SWNTs as striations whose size and regularity are affected by the polarity of the lysophospholipids. We further show that wrapping is only observed when SWNTs are in the lipid phase and not the vacuum phase, suggesting that the environment has a pertinent role in the binding process. Our findings shed light on the debate over the binding mechanism of amphiphilic polymers and cylindrical nanostructures and have implications on the design of novel supramolecular complexes and nanodevices.     

Azafullerenes encapsulated within single-walled carbon nanotubes

Methods of insertion of azafullerenes in single-walled carbon nanotubes (SWNTs) at different temperatures were investigated, while the effects of the conditions applied on the structure of azafullerene-based peapods, namely, C59N@SWNTs, were explored. Morphological characteristics of C59N@SWNTs were assessed and evaluated by means of high-resolution transmission electron microscopy (HR-TEM). Pathways and chemical reactions that occur upon encapsulation of C59N within SWNTs were evaluated. Monomeric azafullerenyl radical C59N. as inserted into SWNTs at high temperature, from purified (C59N)2 in the gas phase, can undergo a variety of different transformations forming dimers, oligomers or existing in its monomeric form inside SWNTs due to the stabilization effect by nanotube side walls. However, under milder conditions, that is, at lower temperature, bisazafullerene (C59N)2 can be inserted into SWNTs in its pristine dimeric form.     

Encapsulation of carbon chain molecules in single-walled carbon nanotubes

The vacuum space inside carbon nanotubes offers interesting possibilities for the inclusion, transportation, and functionalization of foreign molecules. Using first-principles density functional calculations, we show that linear carbon-based chain molecules, namely, polyynes (C(m)H(2), m = 4, 6, 10) and the dehydrogenated forms C(10)H and C(10), as well as hexane (C(6)H(14)), can be spontaneously encapsulated in open-ended single-walled carbon nanotubes (SWNTs) with edges that have dangling bonds or that are terminated with hydrogen atoms, as if they were drawn into a vacuum cleaner. The energy gains when C(10)H(2), C(10)H, C(10), C(6)H(2), C(4)H(2), and C(6)H(14) are encapsulated inside a (10,0) zigzag-shaped SWNT are 1.48, 2.04, 2.18, 1.05, 0.55, and 1.48 eV, respectively. When these molecules come inside a much wider (10,10) armchair SWNT along the tube axis, they experience neither an energy gain nor an energy barrier. They experience an energy gain when they approach the tube walls inside. Three hexane molecules can be encapsulated parallel to each other (i.e., nested) inside a (10,10) SWNT, and their energy gain is 1.98 eV. Three hexane molecules can exhibit a rotary motion. One reason for the stability of carbon chain molecules inside SWNTs is the large area of weak wave function overlap. Another reason concerns molecular dependence, that is, the quadrupole-quadrupole interaction in the case of the polyynes and electron charge transfer from the SWNT in the case of the dehydrogenated forms. The very flat potential surface inside an SWNT suggests that friction is quite low, and the space inside SWNTs serves as an ideal environment for the molecular transport of carbon chain molecules. The present theoretical results are certainly consistent with recent experimental results. Moreover, the encapsulation of C(10) makes an SWNT a (purely carbon-made) p-type acceptor. Another interesting possibility associated with the present system is the direction-controlled transport of C(10)H inside an SWNT under an external field. Because C(10)H has an electric dipole moment, it is expected to move under a gradient electric field. Finally, we derive the entropies of linear chain molecules inside and outside an open-ended SWNT to discuss the stability of including linear chain molecules inside an SWNT at finite temperatures.     

Third-order optical susceptibility of single-walled carbon nanotubes

The third-order susceptibility of tetrachloroethane dispersions of capped single-wall carbon nanotubes (SWCNT) has been analyzed by the z-scan technique using a femtosecond laser, and the SWCNT image obtained by atomic force microscopy has been also presented.     

Controlled oxidative cutting of single-walled carbon nanotubes

The oxidation reaction of piranha solutions with purified HiPco carbon nanotubes was measured as a function of temperature. At high temperatures, piranha is capable of attacking existing damage sites, generating vacancies in the graphene sidewall, and consuming the oxidized vacancies to yield short, cut nanotubes. Increased reaction time results in increasingly shorter nanotubes. However, significant sidewall damage occurs as well as selective etching of the smaller diameter nanotubes. On the other hand, room-temperature piranha treatments show the capability of cutting existing damage sites with minimal carbon loss, slow etch rates, and little sidewall damage. Combined with a method of introducing controlled amounts of damage sites, these room-temperature piranha solutions have the potential to yield an efficient means of creating short, cut nanotubes.