Palladium catalyzed C-H functionalization of O-arylcarbamates: selective ortho-bromination using NBS

A series of cyclometalated palladium complexes derived from O-phenylcarbamates has been synthesized by the reaction of the respective carbamates with Pd(OAc)(2) in the presence of acids, CF(3)CO(2)H, CF(3)SO(3)H, and p-TsOH. The palladacycles were observed to coordinate amines and electron rich anilines but not sulfonamides or carboxamides. Analysis of the (t)Bu-NH(2) adduct of the palladacycle 2b (2b·(t)Bu-NH(2)) by NMR spectroscopy (NOE) revealed a cis-coordination of the amine. However, the amine adducts failed to undergo ortho-amination (C-N bond formation) under varied reaction conditions. Notably, the palladacycle 1d was found to react efficiently with N-iodosuccinimide (NIS) to yield the ortho-iodinated carbamate, 1e. More significantly, this reaction can be extended to a palladium-catalyzed ortho C-H bromination of aryl-O-carbamates even at 5 mol % loading of Pd(OAc)(2) using N-bromosuccinimide (NBS).     

Sensitive amperometric detection for capillary electrophoresis of phenol carbamates with in‐line thermal hydrolysis strategy

A strategy on amperometric detection for CZE of phenol carbamates as model analytes with a facile in‐line thermal hydrolysis was presented, in which a thermal hydrolysis, subsequent CZE separation and final column‐end amperometric detection were accomplished in an intact capillary. Key parameters of hydrolysis dynamics of carbamates and electrochemical detection of the hydrolysates were studied, as well as electrophoretic conditions. Under the optimal conditions, the capillary was utilized as chambers for in situ hydrolysis, CZE separation, and electrochemical detection. The successive separation of hydrolysates of five carbamates (propoxur, carbofuran, 3‐OH‐carbofuran, carbaryl and bendiocarb) were achieved within 17 min. Applied to vegetable samples, the recoveries of carbamates fortified at 0.02 and 0.05 mg/kg were ranging in 88–107.2 and 86.3–107.3%, respectively. The success in the implementation of such a scheme resulted in a simple instrument as compared with those current analytical methods with post‐column derivization or pre‐column hydrolysis, or online enrichment in chip, respectively. This protocol might possess a potential utility for the sensitive amperometric detection of phenol carbamates.     

Energetic and conformational changes upon complexation of gelatin with sodium dodecyl sulfate

The effect of sodium bis(2-ethylhexyl)sulfosuccinate/isooctane/water microemulsions on the stability of 2,2-dimethyl-2,3-dihydro-1-benzofuran-7-yl methylcarbamate (carbofuran, CF), 3-hydroxy-2,3-dihydro-2,2-dimethylbenzofuran-7-yl methylcarbamate (3-hydroxycarbofuran, HCF) and 3-keto-2,3-dihydro-2,2-dimethylbenzofuran-7-yl methylcarbamate (3-ketocarbofuran, KCF) in basic media has been studied. The presence of these microheterogeneous media implies a large basic hydrolysis of CF and HCF on increasing surfactant concentration and, also, on increasing water content in the microemulsion. The hydrolysis rate constants are approximately 2- and 10-fold higher than those in pure water for HCF and CF, respectively. In contrast, a steep descent in the rate of decomposition for KCF was observed. These behaviours can be ascribed to the presence of CF derivatives both in the hydrophilic phase and in the lipophilic phase, while the hydroxyl ions are only restricted to the water pool of the microemulsion (hydrophilic phase). The kinetic rate constants for the basic hydrolysis in AOT-based microemulsions have been obtained on the basis of a pseudophase model. Taking into account that an important part of soils are colloids, the possibility of the presence of restricted water environments implies that soil composition and its structure will play an important role in the stability of these carbamates. In fact, we observed that the presence of these restricted aqueous media in the environment, in particular in watersheds and in wastewaters, could reduce significantly the half-life of these pesticides (33% and 91% for HCF and CF, respectively).     

Leaching potential of carbamates and their metabolites and comparison with triazines

This paper reports the results of a laboratory study aimed at defining the leaching potential of the following pesticides and respective metabolites belonging to the families of N-methylcarbamates and triazines: benfuracarb (BF), carbofuran (CF), 3-keto-carbofuran (3KC) and 3-hydroxy-carbofuran (3HC), atrazine (ATR), simazine (SIM), terbuthylazine (TER), deethylatrazine (DEA), deisopropylatrazine (DIA) and desethylterbuthylazine (DET).All tested compounds, but BF, are very mobile in soil. Triazines exhibited a relatively high persistence, especially DEA, with a DT₅₀ of 72 days. On the contrary, all the tested carbamates resulted easily degradable in soil with a partial exception represented by CF, with a DT₅₀ of 12 days.The GUS indices show high leaching potentials for all the tested triazines and CF. The GUS index of 3KC lies in the typical area of transient compounds; those of BF and 3HC clearly exhibited a non-leaching behaviour.In the leachate corresponding to the BF column, the parent compound was found at low concentration while its main metabolite, CF, reached much higher values. Also, when applied as parent compound, CF was determined at high values, whereas its metabolites 3KC and 3HC were never detected in the leachates. As to triazines, in the ATR column, the parent compound was found at high levels in the leachate, where DEA exhibited values more than 4 times higher than DIA. In the SIM column DIA reached levels 8-fold higher than those in the ATR column. TER occurred at levels close to that of ATR in the respective leachate; DET was found at high levels whereas DIA was not detectable.     

BrF3, an underutilized reagent in organic chemistry: a novel C-C-N to C-N-C rearrangement.

Little is known about bromine trifluoride in organic chemistry. Under the right conditions, it can be a useful tool and generate a new and unprecedented chemistry. Thus, when reacted with oxime methyl ethers of alpha-ketoesters, BrF3 was able to convert the oxime group into a CF2 group and through a new type of rearrangement cause a shift of the carboxylate group to the nitrogen atom. The novel structure of the alpha,alpha-difluorocarbamate was also proven by 15N NMR as demonstrated for compounds 3, 8, 9, 12, 15, and 18. Another novel "double rearrangement" was observed during the formation of 19. Dynamic 19F NMR experiments indicate a high nitrogen inversion-rotation (NIR) barrier for these novel carbamates of about 12.5 kcal/mol.     

Base catalyzed cyclization of N-aryl and N-alkyl-O-propargyl carbamates to 4-alkylidene-2-oxazolidinones

The base catalyzed cyclization of N-aryl and N-alkyl-O-propargyl carbamates is studied in detail. The effect of various bases and solvents on the efficacy of this cyclization reaction is analyzed and a new base-solvent system (LiOH in DMF) for effective cyclization of these carbamates is reported. A number of differentially substituted O-propargyl carbamates were cyclized to the corresponding 2-oxazolidinones under these conditions. The reaction conditions reported here are mild and no side reactions were observed in any of the substrates studied. A propargyl carbonate group was unaffected during the course of the cyclization of the O-propargyl carbamate group. The propargyl carbamates were prepared from the corresponding alkyl or aryl amines and the corresponding propargyl chloroformate, resulting in oxazolidinones diversely substituted at the nitrogen atom. N-Aryl-O-propargyl carbamates cyclized readily to the corresponding oxazolidinones with LiOH in DMF, whereas N-alkyl-O-propargyl carbamates reacted slowly under the same conditions. O-Propargyl carbamates substituted at the 1-position tend to cyclize faster whereas those substituted at 3-position cyclize considerably slower than the unsubstituted carbamates.     

Simultaneous determination of airborne carbamates in workplace by high performance liquid chromatography with fluorescence detection

A high performance liquid chromatography with fluorescence (HPLC-F) detector was examined to simultaneous determination of airborne carbamates in the workplace of manufactory. The OVS-2 air sampling tube filled with glass fiber filter or quartz fiber and combined filter/XAD-2 were evaluated to collect nine commonly used carbamates (Carbofuran, Isoprocarb, Methomyl, Metolcarb, Thiodicarb, Carbaryl, Oxamyl, Methiocarb, and Prpoxur) from the air of manufactory in high humidity country. After being extracted with acetonitrile from sampling tubes, the carbamates were determined by high performance liquid chromatography with fluorescence detection posterior to on-line derivatization. The collection of carbamates and the recovery of extraction from glass wool fiber in several concentration levels, and from quartz filter were evaluated. The storage stability of carbamates was also tested. Results indicated that the HPLC-fluorescence method offers satisfactory resolution and sensitivity in carbamate analysis. With the glass fiber filter and combined filter/XAD-2, the Carbofuran, Isoprocarb, Methomyl, Metolcarb, and Thiodicarb were stable for a 28-day storage test, Carbaryl and Oxamyl for 14 days, and Methiocarb and Prpoxur for 7 days. All of these pesticides were with detection limit of 3 μg m⁻³. It is suited for environmental monitoring. The airborne carbamates in different areas of the manufactory were measured.     

Synthesis of carbamate derivatives of coumarin and chromene

Condensation of methyl (3-hydroxyphenyl)carbamate with ethyl acetoacetate and ethyl benzoylacetate at room temperature, as well as with L-2-hydroxysuccinic acid on heating, in the presence of concentrated sulfuric acid gave the corresponding methyl (4-R-2-oxo-2H-chromen-7-yl)carbamates (R = Me, Ph, H). Condensation of methyl (3-hydroxyphenyl)carbamate with benzylidenemalononitrile or with aromatic aldehydes and malononitrile on heating in propan-2-ol in the presence of piperidine led to the formation of the corresponding methyl (4-aryl-2-amino-3-cyano-4H-chromen-7-yl)carbamates.     

The direct conversion of carbamates to ureas using aluminum amides

The conversion of carbamates into ureas using aluminum amide complexes is reported. This reaction is a convenient method to prepare bi-, tri- and tetra-substituted ureas from carbamate-protected primary or secondary amines by reaction with primary or secondary amines in the presence of stoichometric quantities of trimethylaluminum. A reactivity trend of the various carbamates was observed and methyl and benzyl carbamates were reacted selectively in the presence of t-butyl carbamates.     

Practical synthesis of unsymmetrical ureas from isopropenyl carbamates

A very convenient method for the synthesis of unsymmetrical ureas is described, based on isopropenyl carbamates. The synthetic efficiency of traditional methods for urea formation, such as use of phosgene or alkyl and aryl carbamates, is limited by the formation of symmetrical urea side products or reaction reversibility. Isopropenyl carbamates react with amines cleanly and irreversibly and give unsymmetrical ureas in high yield and purity. This method is ideal for the rapid synthesis of compound libraries.     

Versatile Use of Carbon Dioxide in the Synthesis of Carbamates

Summary. Organic carbamates classically have been synthesized using harmful and toxic reagents like phosgene, its derivatives, and carbon monoxide. Recently, carbon dioxide was used as a cheap and harmless reagent for the synthesis of organic carbamates in the gaseous or supercritical state, or in an electrochemical process, or organic carbonates as sources of carbon dioxide as an alternative to the harmful reagents. The present review will deal with the extensive use of carbon dioxide in the synthesis of organic carbamates.     

Pyrazoles and Pyrazolo[4,3-<Emphasis Type="Italic">e</Emphasis>]pyrrolo[1,2-<Emphasis Type="Italic">a</Emphasis>]pyrazines,I. Synthesis and Antimicrobial Activity

Summary. The synthesis of the title compounds was achieved using 1-phenyl-5-(pyrrol-1-yl)-1H-pyrazole-3-carboxylic acid azide as starting material. The latter compound was allowed to react with alcohols and amines to afford the corresponding carbamates and urea derivatives. Alkaline hydrolysis of the carbamates gave the corresponding amine, which was acylated and/or aroylated to give amide derivatives. These and the urea derivatives were subjected to cyclodehydration to give the title compounds. Antibacterial and antifungal activities were observed for several derivatives.     

Lanthanum(III) isopropoxide catalyzed chemoselective transesterification of dimethyl carbonate and methyl carbamates

A practical transesterification of less reactive dimethyl carbonate and much less reactive methyl carbamates with primary (1°), secondary (2°), and tertiary (3°) alcohols was established with the use of a lanthanum(III) complex, which was prepared in situ from lanthanum(III) isopropoxide (3 mol %) and 2-(2-methoxyethoxy)ethanol (6 mol %). In particular, corresponding carbonates and carbamates obtained were of synthetic utility from the viewpoint of the selective protection and/or deprotection of 1°-, 2°-, and 3°-alcohols.     

Adsorption of CF4 on graphite preplated with a monolayer of CF3Cl

We report a study of the adsorption of CF(4) on graphite preplated with a monolayer of CF(3)Cl, using infrared reflection absorption spectroscopy combined with ellipsometry. The saturated vapor pressure of CF(3)Cl is nearly 3 orders of magnitude smaller than that of CF(4) at the same temperature, so the main control variables are the temperature and the pressure (or chemical potential) of CF(4), together with the initial coverage of CF(3)Cl. The temperature range covered is 60-105 K. We find that, if the initial monolayer of CF(3)Cl is liquid, CF(4) continuously displaces CF(3)Cl by substitution in the monolayer. If the initial monolayer of CF(3)Cl is solid, due to either lower temperature or compression, CF(4) condenses as a second layer on the top of the CF(3)Cl layer, with only slight mixing with the original layer. This behavior persists to multiple layers of CF(4).     

N-甲氧基-N-{2-[2-取代-4-氯-3(2H)哒嗪酮-5-氧(硫)亚甲基]苯基}氨基甲酸甲酯的合成及其生物活性

2取代4氯5羟基(巯基)3(2H)哒嗪酮与N甲氧基N2溴甲苯氨基甲酸甲酯反应合成了一系列新型N甲氧基N{2[2取代4氯3(2H)哒嗪酮5氧(硫)亚甲基]苯基}氨基甲酸甲酯,其结构经1HNMR,IR和LCMS确认。生物活性测定表明,该类化合物在50mg·L-1下对稻瘟病菌,黄瓜灰霉,小麦赤霉病等具有较高的抑菌活性。     

Pyrazoles and Pyrazolo[4,3- e]pyrrolo[1,2- a]pyrazines, I. Synthesis and Antimicrobial Activity

The synthesis of the title compounds was achieved using 1-phenyl-5-(pyrrol-1-yl)-1H-pyrazole-3-carboxylic acid azide as starting material. The latter compound was allowed to react with alcohols and amines to afford the corresponding carbamates and urea derivatives. Alkaline hydrolysis of the carbamates gave the corresponding amine, which was acylated and/or aroylated to give amide derivatives. These and the urea derivatives were subjected to cyclodehydration to give the title compounds. Antibacterial and antifungal activities were observed for several derivatives.     

Synthesis, characterization, and theoretical study of stable isomers of C70(CF3)n (n = 2, 4, 6, 8, 10)

Reaction of C70 with ten equivalents of silver(I) trifluoroacetate at 320-340 degrees C followed by fractional sublimation at 420-540 degrees C and HPLC processing led to the isolation of a single abundant isomer of C70(CF3)n for n = 2, 4, 6, and 10, and two abundant isomers of C70(CF3)8. These six compounds were characterized by using matrix-assisted laser desorption ionization (MALDI) mass spectrometry, 2D-COSY and/or 1D 19F NMR spectroscopy, and quantum-chemical calculations at the density functional theory (DFT) level. Some were also characterized by Raman spectroscopy. The addition patterns for the isolated compounds were unambiguously found to be C1-7,24-C70(CF3)2, C1-7,24,44,47-C70(CF3)4, C2-1,4,11,19,31,41-C70(CF3)6, Cs-1,4,11,19,31,41,51,64-C70(CF3)8, C2-1,4,11,19,31,41,51,60-C70(CF3)8, and C1-1,4,10,19,25,41,49,60,66,69-C70(CF3)10 (IUPAC numbering). Except for the last compound, which is identical to the recently reported, crystallographically characterized C70(CF3)10 derivative prepared by a different synthetic route, these compounds have not previously been shown to have the indicated addition patterns. The largest relative yield under an optimized set of reaction conditions was for the Cs isomer of C70(CF3)8 (ca. 30 mol % of the sublimed mixture of products based on HPLC integration). The results demonstrate that thermally stable C70(CF3)n isomers tend to have their CF3 groups arranged on isolated para-C6(CF3)2 hexagons and/or on a ribbon of edge-sharing meta- and/or para-C6(CF3)2 hexagons. For Cs- and C2-C70(CF3)8 and for C2-C70(CF3)6, the ribbons straddle the C70 equatorial belt; for C1-C70(CF3)4, the para-meta-para ribbon includes three polar hexagons; for C1-7,24-C70(CF3)2, the para-C6(CF3)2 hexagon includes one of the carbon atoms on a C70 polar pentagon. The 10.3-16.2 Hz 7JF,F NMR coupling constants for the end-of-ribbon CF3 groups, which are always para to their nearest-neighbor CF3 group, are consistent with through-space Fermi-contact interactions between the fluorine atoms of proximate, rapidly rotating CF3 groups.     

Reactions of (CF3)3BCO with amines and phosphines

Reactions of tris(trifluoromethyl)borane carbonyl, (CF(3))(3)BCO, with ammonia yielded either a mixture of [NH(4)][(CF(3))(3)BC(O)NH(2)], [NH(4)][(CF(3))(3)BCN], and [NH(4)](2)[{(CF(3))(3)BC(O)}(2)NH] or neat [NH(4)](2)[{(CF(3))(3)BC(O)}(2)NH] depending on the reaction conditions. The salt K[(CF(3))(3)BC(O)NH(2)] was obtained as the sole product from the reaction of NH(3) with K[(CF(3))(3)BC(O)F]. A simple synthesis for cyanotris(trifluoromethyl)borates, M[(CF(3))(3)BCN], was developed by dehydration of M[(CF(3))(3)BC(O)NH(2)] (M = [NH(4)], K) using phosgene. In addition, syntheses of the tris(trifluoromethyl)boron species [(CF(3))(3)BC(O)NH(n)()Pr](-), [(CF(3))(3)BC(O)NMe(2)](-), and (CF(3))(3)BC(O)NMe(3), as well as of (CF(3))(3)BC(O)PMe(3), were performed. All species were characterized by multinuclear NMR spectroscopy. As far as neat substances resulted, IR and Raman spectra were recorded and their thermal behaviors were studied by differential scanning calorimetry. The interpretation of reaction pathways, structures, and vibrational spectra are supported by DFT calculations. The solid-state structure of K(2)[{(CF(3))(3)BC(O)}(2)NH].2MeCN was determined by single-crystal X-ray diffraction.     

Synthesis, structure, and 19F NMR spectra of 1,3,7,10,14,17,23,28,31,40-C60(CF3)10

A significant improvement in the selectivity of fullerene trifluoromethylation reactions was achieved. Reaction of trifluoroiodomethane with [60]fullerene at 460 degrees C and [70]fullerene at 470 degrees C in a flow reactor led to isolation of cold-zone-condensed mixtures of C60(CF3)n and C70(CF3)n compounds with narrow composition ranges: 6 < or = n < or = 12 for C(60)(CF3)n and 8 < or = n < or = 14 for C70(CF3)n. The predominant products in the C(60) reaction, an estimated 40+ mol % of the cold-zone condensate, were three isomers of C60(CF3)10. Two of these were purified by two-stage HPLC to 80+% isomeric purity. The third isomer was purified by three-stage HPLC to 95% isomeric purity. Thirteen milligrams of this orange-brown compound was isolated (5% overall yield based on C60, and its C1-symmetric structure was determined to be 1,3,7,10,14,17,23,28,31,40-C60(CF3)10 by X-ray crystallography. The CF3 groups are either meta or para to one another on a p-m-p-p-p-m-p-m-p ribbon of edge-sharing C6(CF3)2 hexagons (each pair of adjacent hexagons shares a common CF3 group). The selectivity of the C70 reaction was even higher. The predominant product was a single C70(CF3)10 isomer representing >40 mol % of the cold-zone condensate. Single-stage HPLC led to the isolation of 12 mg of this brown compound in 95% isomeric purity (27% overall yield based on converted C70. The new compounds were characterized by EI or S(8)-MALDI mass spectrometry and 2D-COSY 19F NMR spectroscopy. The NMR data demonstrate that through-space coupling via direct overlap of fluorine orbitals is the predominant contribution to J(FF) values in these and most other fullerene(CF3)n compounds.     

一种胺氧化羰化制氨基甲酸酯新催化剂体系

异氰酸酯是重要的有机反应中间体 ,可用于合成聚异氰酯、聚氨酯、聚脲及用于高聚物的粘合剂、杀虫剂、除草剂等[1 ] .一些异氰酸酯在军事上也有重要用途 .目前 ,工业异氰酸酯的生产方法仍为光气法 :ＲＮＨ2 +ＣＯＣｌ2 ＲＮＣＯ + 2ＨＣｌ　　该法普遍存在设备腐蚀、环境污染等问题 ,因而由含氮有机物羰化制取氨基甲酸酯 ,再通过热裂解制取异氰酸酯的环境友好催化过程已受到世界各国的重视[1 ,2 ] .尽管由硝基化合物直接还原羰化制氨基甲酸酯 ,从减少反应步骤的角度考虑更为合理[3～7] ,但该反应存在条件苛刻、催化剂回收困难、多硝基化合物…