Structural investigation of salts containing ions [Pd(NH<Subscript>3</Subscript>)<Subscript>4</Subscript>]<Superscript>2+</Superscript> and [IrF<Subscript>6</Subscript>]<Superscript>2–</Superscript>

Double complex salts (DCS) α-[Pd(NH₃)₄][IrF₆]·H₂O (P2₁/m, a = 6.3181(3) Å, b = 10.8718(5) Å, с = 7.4526(4) Å, β = 103.568(2)°), β-[Pd(NH₃)₄][IrF₆]·H₂O (P2₁/с, a = 8.5773(3) Å, b = 10.8791(4) Å, с = = 12.6741(3) Å, β = 122.497(2)°), [Pd(NH₃)₄]₃[IrF₆]₂Cl₂·H₂O (P-1, a = 7.6080(2) Å, b = 7.6274(2) Å, с = 11.8070(3) Å, β = 122.497(2)°), and [Pd(NH₃)₄]₂[IrF₆]NO₃ (Fm-3m, a = 11.21210(10) Å) have been synthesized and structurally characterized for the first time. The existence of polymorphs for the DCS has been revealed. The influence of the chemical composition of the initial reagents on the reaction course and, respectively, the products, has been demonstrated. A hypothesis on the influence of the second coordination sphere on the formation of one or the other polymorph of the DCS has been suggested. It has been shown that the series α-[Pd(NH₃)₄][МF₆]·H₂O (M = Pt, Pd) exhibits isostructurality.     

Interactions between AuCl<Subscript>4</Subscript><Superscript>−</Superscript> and CTA<Superscript>+</Superscript> ions in water

The solubility of hexadecyltrimethylammonium tetrachloroaurate (CTA·AuCl₄) in water was measured at different temperatures of 288.2, 293.2, 298.2, 303.2, and 308.2 K. The enthalpy change associated with the formation of the CTA·AuCl₄ precipitate was estimated on the basis of the van’t Hoff equation and was found to be −42.5 ± 2.8 kJ mol⁻¹ at 298.2 K. The calorimetric enthalpy change for the CTA·AuCl₄ precipitate formation was directly determined by isothermal titration calorimetry performed at 298.2 K and was found to agree well with that estimated from the van’t Hoff equation.     

Structures of the complex ions [CuCl<Subscript>4</Subscript>]<Superscript>2−</Superscript> and [CuCl<Subscript>5</Subscript>]<Superscript>3−</Superscript>

The electronic structures of the complex ions [CuCl₄]^2? and [CuCl₅]^3? were analyzed in terms of the extended angular overlap model (AOM) with consideration to sd and pd mixing. The total antibonding orbital energies of these ions show no anomalies in the transition from a tetrahedron to a planar square [CuCl₄]^2? and from a trigonal bipyramid to a tetragonal pyramid [CuCl₅]^3?. Presumably, the existence of numerous intermediate forms of these complexes is mainly due to the packing effects rather than the electronic factors.     

Experimental Determination of the Isotherm at 15°C of the System Mg<Superscript>2+</Superscript>/Cl<Superscript>−</Superscript>, SO<Subscript>4</Subscript><Superscript>2</Superscript>–H<Subscript>2</Subscript>O

Summary.  The diagram of the ternary system Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O was established at 15°C by means of analytical and conductimetric measurements. Three compounds were found in this diagram, which are MgSO₄·6H₂O, MgSO₄·7H₂O, and MgCl₂·6H₂O. The solubility field of MgSO₄·7H₂O is important whereas those of MgSO₄·6H₂O and MgCl₂·6H₂O are small. The compositions (mass-%) of the two invariant points determined by the two methods are: MgSO₄:MgCl₂=2.73:33.80 and MgSO₄: MgCl₂=3.38:28.91. Both the measured and the calculated isotherm at 15°C have been used for modelling of the diagram Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O between 0 and 35°C. The polythermal invariant point was approximately located between 15 and 10°C.  Corresponding author. E-mail: ariguib@planet.tn Received October 16, 2002; accepted (revised) December 3, 2002 Published online April 24, 2003 RID="a" ID="a" Dedicated to Prof. Dr. Heinz Gamsj?ger on the occasion of his 70^th birthday     

Comparison of the specific adsorption of sulfate (HSO<Subscript>4</Subscript><Superscript>−</Superscript>) ions on Cr and Cr<Subscript>2</Subscript>O<Subscript>3</Subscript>

The specific adsorption of sulfate ions on powdered Cr was studied by a radiotracer technique using ³⁵S-labeled sulfuric acid in low concentration (c<10^–3 mol dm^–3) in the presence of a large excess of perchlorate supporting electrolyte. The pH and concentration dependence were determined. On the basis of a comparison of the results obtained for Cr₂O₃ and Cr, it can be assumed that, similar to other metals, the overall sorption behavior of Cr is determined by the protective oxide film present on the surface.     

Blue and green upconversion luminescence modification of Tb<Superscript>3+</Superscript>–Yb<Superscript>3+</Superscript> co-doped Ca<Subscript>5</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>F inverse opal

Tb³⁺–Yb³⁺ co-doped Ca₅(PO₄)₃F inverse opal photonic crystals were prepared by a self-assembly technique in combination with a sol–gel method. Upconversion luminescence characteristics of the inverse opals were investigated. The results indicate that photonic band gap has a significant effect on upconversion luminescence of Tb³⁺–Yb³⁺ co-doped Ca₅(PO₄)₃F inverse opal. Significant inhibition of the green or blue upconversion luminescence was inspected if the photonic band gap overlapped with the emission band of Tb³⁺ ions.     

Yb<Superscript>3+</Superscript> → Er<Superscript>3+</Superscript> energy transfer in Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and temperature characteristic of near-infrared photoluminescence

For the Er³⁺–Yb³⁺ codoped Al₂O₃ powders, the strong near-infrared photoluminescence (PL) centered at 1.535 μm derived from the energy transfer (ET) from Yb³⁺ to Er³⁺ was detected by a 978 nm laser diode excitation. Compared with that of Er³⁺ doped Al₂O₃ powders, the PL intensity enhanced about 9 times, the full width at half maximum (FWHM) extended from 82 to 90 nm, and the lifetime increased from 3.22 to 4.17 ms for Er³⁺–Yb³⁺ codoped Al₂O₃ powders at room temperature. The ET coefficient of 2.18 × 10⁻¹⁸ cm³ s⁻¹ from Yb³⁺ to Er³⁺ was obtained based on the rate equations. The decrease of PL intensity with increasing temperature in the range of 298–733 K was observed, due to thermally enhanced nonradiative relaxation ⁴I_13/2 → ⁴I_15/2 dominated over thermally enhanced phonon-assisted ET in the Er³⁺–Yb³⁺ codoped Al₂O₃.     

Adsorption of Cl<Superscript>−</Superscript> ions on γ-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> oxide from nitrate solutions

The adsorption of chloride ions on γ-Fe₂O₃ oxide (maggemite) from nitrate solution is studied using the method of potentiometric titration and an ion-selective electrode. The specific character of adsorption is determined. It is shown that the maggemite surface coverage with Cl^? ions increases with increasing concentration of ions in the solution, decreasing pH value, and increasing potential. The adsorbability of ions changes drastically in the pH range about pH₀ (γ-Fe₂O₃)6.2. It is found that the adsorption of chloride ions from neutral nitrate solution exponentially increases in the potential range from 0.1 to 1.0 V. The type of adsorption isotherm and the adsorption parameters are determined. It is found that, in the absence of external polarization, the concentration dependences of adsorption of Cl^? ions are complex-shaped, and their initial portions are described by the Langmuir isotherm. Further increase of adsorption is explained by the penetration of Cl^? ions inwards the oxide.     

Study on nonlinear kinetic and thermodynamics of oscillating reaction of amino Acid-BrO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack>-Mn<Superscript>2+</Superscript>-H<Subscript>2</Subscript>SO<Subscript>4</Subscript>-acetone system

With the help of the kinetic parameters (the rate constant (k _in k _p) and the apparent activation energy (E _in E _p) of the oscillatory induction period and oscillation period) of the oscillating reaction using thirteen amino acids, leucine (Leu), threonine (Thr), arginine (Arg), lysine (Lys), histidine (His), alanine (Ala), glutamine (Glu), glycine (Gly), methionine (Met), cystine (Cys), tryptophan (Trp), serine (Ser) and tyrosine (Tyr), as organic substrates in amino acid-BrO₃⁻-Mn²⁺-H₂SO₄-acetone system, then based on the Oregonator model and the thermodynamics theory on irreversible process, the thermodynamic function (ΔH _in, ΔG _in, ΔS _in and ΔH _p, ΔG _p, ΔS _p) of these oscillating system are studied. The results indicate the entropy ΔS of these oscillating reaction are negative, thereby it is proved that the oscillating reaction is a noequilibrium system with dissipation structure in agreement with the character of the oscillating reaction from disorder to order in irreversible thermodynamics. These are satisfactorily to explain the experimental phenomena.     

The effect of NO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack> and OH<Superscript>−</Superscript> ions on the laser ablation of Cs<Superscript>+</Superscript> ion on Type 304 stainless steel

Type 304 stainless steel specimens artificially contaminated with CsCl solution were treated with KOH solution and KNO₃ solution, respectively. Cs⁺ ion removal tests by a Q-switched Nd:YAG laser at 1064 nm at a given fluence of 57.3 J/cm² were performed. The surface morphology and the relative atomic mole ratio of the specimen surface were investigated by SEM and EPMA. The order of Cs⁺ ion removal efficiency of laser was no-treatment < KOH < KNO₃ during the 42 shots. From the investigation of XPS peaks around 532.7 and 292.9 eV, KNO₃ on a surface of specimen was found to be fully decomposed during the laser irradiation. It was suggested that Cs₂O particulates formed by the reaction between the reactive oxygen generated from the nitrate ion and Cs⁺ ion on the metal surface could be easily suspended. For the KOH system, FeOOH was formed during the laser irradiation and it changed into Fe₂O₃. It was also suggested that Cs₂O particulates were formed by the reaction between the reactive oxygen generated from the decomposition of K₂O and Cs⁺ ion on the metal surface..     

Interaction of [В<Subscript>10</Subscript>H<Subscript>10</Subscript>]<Superscript>2–</Superscript> and [В<Subscript>12</Subscript>H<Subscript>12</Subscript>]<Superscript>2–</Superscript> with nitro compounds

The interaction of the [B₁₀H₁₀]^2– and [B₁₂H₁₂]^2– anions with aliphatic and aromatic nitro compounds (RNO₂, where R = Et, n-Pr, i-Pr, tert-Bu, Ph) has been studied under irradiation with visible and UV light. It has been shown that, depending on the reaction conditions, both mono- and disubstituted nitro-closo-decaborates can be selectively obtained in yields up to 50%.     

Thermogravimetric analysis of wheatleyite Na<Subscript>2</Subscript>Cu<Superscript>2+</Superscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>2</Subscript>·2H<Subscript>2</Subscript>O

Evidence for the existence of primitive life forms such as lichens and fungi can be based upon the formation of oxalates. These oxalates form as a film like deposit on rocks and other host matrices. The anhydrous oxalate mineral moolooite CuC₂O₄ as the natural copper(II) oxalate mineral is a classic example. Another example of a natural oxalate is the mineral wheatleyite Na₂Cu²⁺(C₂O₄)₂·2H₂O. High resolution thermogravimetry coupled to evolved gas mass spectrometry shows decomposition of wheatleyite at 255°C. Two higher temperature mass losses are observed at 324 and 349°C. Higher temperature mass losses are observed at 819, 833 and 857°C. These mass losses as confirmed by mass spectrometry are attributed to the decomposition of tennerite CuO. In comparison the thermal decomposition of moolooite takes place at 260°C. Evolved gas mass spectrometry for moolooite shows the gas lost at this temperature is carbon dioxide. No water evolution was observed, thus indicating the moolooite is the anhydrous copper(II) oxalate as compared to the synthetic compound which is the dihydrate.     

Synthesis of Ca<Subscript>3</Subscript>Al<Subscript>6</Subscript>Si<Subscript>2</Subscript>O<Subscript>16</Subscript>: Ce<Superscript>3+</Superscript>, Tb<Superscript>3+</Superscript> phosphors by sol–gel method and optical properties

Ca₃Al₆Si₂O₁₆: Ce³⁺, Tb³⁺ phosphors have been prepared by sol–gel method. The structure and photoluminescence properties were studied with careful. The results indicated that the single-phased Ca₃Al₆Si₂O₁₆ phosphors crystallize at 1,000 °C for 2 h in conventional furnace. With appropriate concentrations of Ce³⁺ and Tb³⁺ ions into Ca₃Al₆Si₂O₁₆ matrix, these materials exhibit blue phosphors and white light under ultraviolet radiation. White-light emission can be achieved because of a 400 nm emission ascribed to transitions of Ce³⁺ ions and three sharp peaks at 487, 543, 585 nm, respectively, resulting from transitions of Tb³⁺ ions.     

Preparation and Characteristics of Nb<Superscript>5+</Superscript>, Ta<Superscript>5+</Superscript>/TiO<Subscript>2</Subscript> Nanoscale Powders by Sol–Gel Process Using TiCl<Subscript>3</Subscript>

Nanoscale TiO₂ powders doping with niobium and tantalum were prepared using TiCl₃ as a source matter. Characterization of the materials was performed by Thermoanalys, particle size, XRD, BET, FTIR, Magnetic Susceptibility. The influence of niobium and tantalum ions on the phase transition was studied, the changes in the crystal size and microstain distributions obtained at 400C were analyzed. The results show that the substitutes of Nb^{5 +}, Ta^{5 +} for Ti⁴⁺ in the anatase structure cause distortions and improve to form rutile. When the dopant content is over certain molar percent, biphase reappears. The IR spectra and magnetic susceptibility indicate the Nb–Nb (or Ta–Ta) bonds along c-axis in rutile by two Nb^{5 +} (Ta^{5 +}) ions located in sites adjacent along the c-axis appear with the dopant content. The magnetic characteristics at rutile showed a weak paramagnetism.     

Single-phased white-light emitting CaAl<Subscript>2</Subscript>Si<Subscript>2</Subscript>O<Subscript>8</Subscript>: Eu<Superscript>2+</Superscript>, Mn<Superscript>2+</Superscript> phosphors prepared by a sol–gel method

CaAl₂Si₂O₈: Eu²⁺, Mn²⁺ phosphors have been prepared by a sol–gel method. X-ray diffractometer, spectrofluorometer and UV–Vis spectrometer were used to characterize structural and optical properties of the samples. The results indicate that anorthite (CaAl₂Si₂O₈) directly crystallizes at 1000 °C in the sol–gel process. CaAl₂Si₂O₈: Eu²⁺, Mn²⁺ phosphors show two emission bands excited by ultraviolet light. Blue (around 415 nm) and yellow (around 575 nm) emissions originate from Eu²⁺ and Mn²⁺, respectively. With appropriate tuning of Mn²⁺ content, CaAl₂Si₂O₈: Eu²⁺, Mn²⁺ phosphors exhibit different hues and relative color temperatures.     

Influence of ion size on the stability of chloroplumbates containing PbCl<Stack><Subscript>5</Subscript><Superscript>−</Superscript></Stack> or PbCl<Stack><Subscript>6</Subscript><Superscript>2−</Superscript></Stack>

The enthalpies of formation of PbCl₄, PbCl₅⁻ and PbCl₆²⁻, originating from quantum mechanics, have enabled the thermodynamic behaviour of these ions with respect to Cl-detachment to be assessed. The stability of salts containing PbCl₅⁻ and PbCl₆²⁻ as a function of the dimensions of these anions and complementary cations was studied using an approach combining the Kapustinskii-Yatsimirskii equation with basic thermochemical relationships. It was found that hexachloroplumbates of monovalent metal cations will not dissociate into metal chlorides and PbCl₄, provided the complementary cations are suitably large in size. Hexachloroplumbates of divalent metal cations have not yet been synthesised since no known metal cations attain the requisite large size. Such salts will not dissociate if the divalent metal cations are able to complex suitably large electron-donating ligands. The pentachloroplumbates of both monovalent and divalent metal cations are unstable, since no known metal cations have appropriately large ionic radii. The approach adopted appears to be useful for the examination of the thermal behaviour, stability and reactivity of chloroplumbates.     

Analysis of the aromaticity in extended systems formed from isoelectronic Al<Subscript>4</Subscript><Superscript>2−</Superscript> and C<Subscript>4</Subscript><Superscript>2+</Superscript> aromatic clusters

Inspired by carbo-benzene and its inorganic analogues, in the current work, the viability of extended systems (called carbomers) formed from aromatic small rings was studied. The aluminum aromatic cluster, Al₄^2?, and its isoelectronic carbon analogue, C₄²⁺, were employed as starting point. The insertion of alkynyl units into the Al–Al and C–C bonds results in the extended molecules named carbomers. These molecules were compared with the global minima structures, which were searched employing the genetic algorithm program, GEGA. The electronic delocalization (aromaticity) of the isomers was studied with the induced magnetic field (B^ind). The results showed that global minimum of C₁₂²⁺ (formed from C₄²⁺) was an unexpected diatropic structure which presented a similar magnetic response to the C₄²⁺ cluster. Also, optical properties of C₁₂²⁺ were computed.     

Mercury complex [(HOCH<Subscript>2</Subscript>)<Subscript>3</Subscript>CNH<Subscript>3</Subscript>]<Stack><Subscript>2</Subscript><Superscript>+</Superscript></Stack> [HgI<Subscript>4</Subscript>]<Superscript>2−</Superscript>: Synthesis and structure

The complex [(HOCH₂)₃CNH₃] ₂ ⁺ [HgI₄]^2? (I) was synthesized by reacting (trioxymethyl)methylammonium iodide with mercury dioide (2: 1 mol/mol) in acetone. X-ray crystallography shows that the complex consists of two types of crystallographically independent [(HOCH₂)₃CNH₃]⁺ cations and tetrahedral anions [HgI₄]^2? (IHgI, 106.49(2)°–113.99(4)°; Hg-I, 2.7849(8)-2.8105(8) Å. [(HOCH₂)₃CNH₃]⁺ cations are linked via hydrogen bonds O…H-N and O-H…N (O…N, 2.84–2.92 Å) to form polymer chains, which are cross-linked with one another via anions (I…H, 2.81, 2.82 Å).     

Research on photosensitivity of benzoquinones and benzoquinoneimines in the sunlight/Fe<Superscript>2+</Superscript>/S<Subscript>2</Subscript>O<Subscript>8</Subscript><Superscript>2−</Superscript> system

This paper investigated the photodegradation characteristics of benzoquinones and benzoquinoneimines. The photosensitivity of benzoquinones and benzoquinoneimines were analyzed by measuring the yield of SO ₄ ^?· in a light/Fe²⁺/S₂O₈ ^2? system and the degradation mechanism of benzoquinones, then discussed benzoquinoneimines in light/Fe²⁺/S₂O₈ ^2? and light/S₂O₈ ^2? system. The results revealed that a more aggressive oxidation of benzoquinones and benzoquinoneimines by the sunlight/Fe²⁺/S₂O₈ ^2? method showed a more rapid and more complete removal of chromaticity than that of the UV/Fe²⁺/S₂O₈ ^2? method. It was showed that they were photosensitizers, and they could generate ¹O₂ and O ₂ ^?· which could promote the formation of SO ₄ ^?· and ^·OH in the sunlight system. Nevertheless, for benzoquinones, the sunlight/S₂O₈ ^2? method was superior to the UV/S₂O₈ ^2? method. For benzoquinoneimines, the sunlight/S₂O₈ ^2? method was inferior to the UV/S₂O₈ ^2? method. In addition, the yield of SO ₄ ^?· in the sunlight/Fe²⁺/S₂O₈ ^2? system was more than that of the UV/Fe²⁺/S₂O₈ ^2? system. Therefore, the photosensitivity of benzoquinones is superior to benzoquinoneimines in water treatment.     

Novel ladder-like structure motif assembled from edge-sharing rhombus and square of Mo<Subscript>2</Subscript>Dy<Subscript>2</Subscript> based on [Mo(CN)<Subscript>8</Subscript>]<Superscript>4−</Superscript> and Dy<Superscript>3+</Superscript> ions as building blocks

A novel bimetallic 4d–4f complex, “Cs[Dy(MeOH)₃(DMF)(H₂O)Mo(CN)₈] · H₂O” _n (I) (DMF = N,N′-dimethylformamide), has been synthesized and structurally characterized. The crystal analyses showed that complex I consists of a one-dimensional infinite chain, which adopts a 1D ladder-like structure motif assembled from an edge-sharing rhombus and square of Mo₂Dy₂. This is the first structurally characterized example of a 1D ladder structure based on the [Mo(CN)₈]^4? and Dy³⁺ building blocks. Complex I crystallizes in triclinic crystal system, \(P\bar 1\) space group, with a = 9.876(2), b = 10.300(2), c = 13.498(3) Å, α = 81.96(3)°, β = 86.68(3)°, γ = 65.42(3)°, V = 1236.4(4) ų, and Z = 2.