Catalytic reduction of nitric monoxide by ethene over Ag/TiO2 in the presence of excess oxygen

Selective reduction of nitric oxide (NO) by ethene in the presence of excess oxygen was investigated using a silver supported on TiO₂ (Ag/TiO₂) catalyst. Ag/TiO₂ showed high catalytic activity for the reduction of NO to N₂ and N₂O. The activity for the reduction of NO to N₂ and N₂O was enhanced with an increase up to 3 wt.% Ag loading level. On increasing the concentration of ethene, the catalytic activity for the reduction of NO to N₂ and N₂O was enhanced. The reduction of NO over Ag/TiO₂ catalyst never proceeds without coexistent oxygen.     

Preparation of Mn2O3 and Mn3O4 nanofibers via an electrospinning technique

Thin PVA/manganese acetate composite fibers were prepared by using sol-gel processing and electrospinning technique. After calcinations of the above precursor fibers, Mn₂O₃ and Mn₃O₄ nanofibers with a diameter of 50-200 nm could be successfully obtained. The fibers were characterized by TG-DTA, Scanning electron microscopy, FT-IR, WAXD, respectively. The results showed that the crystalline phase and morphology of nanofibers were largely influenced by the calcination temperature.     

Catalytic oxidation of no to NO2 over Cr/TiO2 and Cu/TiO2 under oxidizing atmosphere

The catalytic activity of Cr/TiO₂ and Cu/TiO₂ for the oxidation of NO under an oxidizing atmosphere has been examined. Both catalysts had excellent ability for the oxidation of NO to NO₂ in the temperature range of 350–400°C.     

Mn2O3纳米结构的简易合成与电化学性质

用简易的室温或水热方法制备出不同形貌的MnCO₃微结构。经600 ℃热处理后,室温制备MnCO₃转变成Mn₂O₃胶体片,而水热制备MnCO₃样品则形成多孔Mn₂O₃纳米结构。然而,室温制备MnCO₃经120 ℃热处理后形成Mn₂O₃晶相。制备样品经过XRD和SEM表征表明,热处理MnCO₃前驱物形成Mn₂O₃过程导致产物形貌与结构变化。其形成机理又通过TEM和FTIR进一步研究。Mn₂O₃纳米结构的电容性质通过循环伏安法表征,结果表明Mn₂O₃形貌与结构对其电容有重要影响。     

NO在Mn_2O_3(110)表面吸附的密度泛函理论研究

基于第一性原理密度泛函计算方法研究了NO在Mn_2O_3(110)面的吸附行为,计算了Mn_2O_3(110)面吸附NO和O_2的吸附构型的结构参数、吸附能和电子结构.结果表明,在Mn_2O_3(110)表面上,NO倾向于吸附在Mn top位,吸附前后的结构总能变化在-0.61~-1.29 eV之间,NO吸附后Mn吸附位周围的配位结构发生变化,使得Mn的电子向NO转移.进一步研究了吸附O_2后的Mn_2O_3表面再进一步吸附NO的行为,发现了ONOO*结构的形成.NO和O_2在表面共吸附形成ONOO*结构时的吸附能(-1.23和-1.39 eV)高于单纯吸附NO时的吸附能,此时Mn的电子向ONOO*结构转移,NO和O_2投影态密度的电子峰广泛交叠,说明成键原子之间有强共价键作用.     

Hydrophilic and hydrophobic nano-sized Mn3O4 particles

Mn₃O₄ Hausmanite nanoparticles were prepared in aqueous solution by using metallic salt and hydrazine as precursor and reducing agent, respectively. The crystallite sizes ranged from 10 to 20 nm and the particle diameter distribution was very narrow and estimated between 20 and 30 nm. Influence of some parameters such as temperature, time of reaction, surfactant nature was studied for a synthesis in an aqueous medium. The as-made manganese oxides particles could be dispersed in an organic solvent containing stabilizing agents, according to perform the synthesis in an H₂O/n-hexan two-phase medium. These nanoparticles were characterized by X-ray diffraction, infrared spectroscopy, scanning and transmission electron microscopies and nitrogen absorption measurements.     

Nd掺杂V2O5/TiO2低温NH3选择性催化还原NOx性能研究

采用溶胶凝胶法和浸渍法制备了Nd掺杂V₂O₅/TiO₂催化剂.用XRD和Raman技术对其晶相结构和分散性进行了表征,并在固定床反应器上评价了其催化活性.然后考察了煅烧温度对催化剂脱硝性能的影响,结合XRD表征结果可知煅烧温度没有改变TiO₂的晶型,只影响了其结晶度.同时氮气吸脱附表征及BET计算结果显示350℃煅烧时催化剂比表面积最大.研究了O₂浓度以及氨氮比对催化剂脱硝性能的影响.同时考察了Nd掺杂催化剂的稳定性,发现Nd改性催化剂有较好的稳定性.并对Nd掺杂催化剂做了抗硫抗水考察,研究结果表明,Nd掺杂催化剂有较好的耐硫耐水性.     

Effect of La2O3 on Catalytic Performance of Au/TiO2 for CO Oxidation

Pure TiO₂ and La-doped TiO₂ were prepared by the sol-gel method. Au was supported on TiO₂ by the deposition-precipitation (DP) method, and its catalytic activity for CO oxidation was tested. The results showed that doping La in Au/TiO₂ could improve its catalytic activity obviously for CO oxidation. The analyses of X-ray diffraction (XRD), temperature-programmed desorption (TPD), and Brunauer-Emmett-Teller (BET) surface area further showed that the presence of La in TiO₂ not only increased its surface area and restrained the growth of TiO₂ crystallites, but could also enhance the microstrain of TiO₂. In terms of O₂-TPD, a new adsorbed species O⁻ appeared on the surface of La-doped TiO₂. The results of in-situ Fourier transform-infrared (FT-IR) spectroscopy illustrated that the high activity of Au/La₂O₃-TiO₂ was attributed to the presence of La promoting the reactivity of CO adsorbed on the Au site and the formation of the second active site on the surface of TiO₂     

CeO2改性Ag-V2O5/TiO2催化剂的甲基吡啶氧化脱甲基性能

以锐钛矿TiO_2为载体,考察了CeO_2改性对Ag-CeO_2-V_2O_5/TiO_2催化3-甲基吡啶氧化脱甲基性能的影响,并优化了催化剂组成与制备条件.结果表明:Ce掺杂改性不仅能够与V物种作用形成Ce VO_4,而且促进V_2O_5分散,改善活性组分的氧化还原性能,从而提高3-甲基吡啶脱甲基转化率与选择性,改善Ag-V_2O_5/TiO_2催化性能.适宜的催化剂组成为V_2O_5负载量15%,Ce/V的摩尔比0.33,Ag质量分数1.0%.过高的焙烧温度将导致TiO_2载体向金红石型转变,Ag-CeO_2-V_2O_5/TiO_2适宜制备条件为450℃焙烧4 h.     

Magnetic properties of Mn2V2O7 single crystals

Magnetic properties of Mn₂V₂O₇ single crystals are investigated by means of magnetic susceptibility, magnetization, and heat capacity measurements. A structural phase transition of the α-β forms is clearly observed at the temperature range of 200-250 K and an antiferromagnetic ordering with magnetic anisotropy is observed below 20 K. A spin-flop transition is observed with magnetic field applied along the [110] axis of β-Mn₂V₂O₇, of which corresponds to the [001] axis of α-Mn₂V₂O₇, suggesting that the spins of Mn²⁺ ions locate within honeycomb layers which point likely in the [110] direction of β-Mn₂V₂O₇ or the [001] axis of α-Mn₂V₂O₇. However, a rather small jump of magnetization at spin-flop transition suggests a possible partition of crystal to some domains through β-to-α transition on cooling or much complex spin structure in honeycomb lattice with some frustration.     

Ti3+自掺杂的TiO2(A)/TiO2(R)/In2O3纳米异质结的制备与可见光催化性能

以TiCl₃和InCl₃为Ti源和In源,在不使用还原剂的条件下,首先通过液相沉淀反应制备前驱体沉淀,然后采用后续水热处理制备Ti³⁺自掺杂的TiO₂(A)/TiO₂(R)/In₂O₃纳米异质结,考察了水热处理温度对材料结构和性能的影响。利用X射线衍射、透射电子显微镜、X射线光电子能谱和紫外-可见漫反射光谱对样品进行表征。分别以罗丹明B和苯酚溶液为模拟废水评价了样品的可见光催化降解性能。结果表明,与纯的TiO₂、In₂O₃以及Ti³⁺自掺杂的TiO₂相比,Ti³⁺自掺杂的TiO₂(A)/TiO₂(R)/In₂O₃纳米异质结在可见光区有明显的吸收,并具有良好的可见光催化降解性能,200℃下水热处理24 h所得样品光催化降解罗丹明B的反应速率常数(0.0444 min^-1)分别是纯TiO₂和In₂O₃的17.76倍和8.71倍。瞬态光电流时间响应结果表明样品的光催化性能主要来源于TiO₂(A)/TiO₂(R)/In₂O₃纳米异质结导致的提高的光生电子和空穴分离效率。     

钛铁矿制备二氧化钛-四氧化三铁复合材料及其光催化应用

TiO_2因具有多种优异的特性被广泛应用在半导体光催化领域,但是纳米结构的TiO_2颗粒细微,在进行光催化反应之后,难以回收再利用。本文以廉价钛铁矿为原料制备光催化剂TiO_2,同时利用副产物铁合成Fe_3O_4,并采用简单温和的浸渍法制备Fe_3O_4/TiO_2磁性复合材料。通过XRD、FT-IR、SEM、EDS等手段对材料形态结构进行表征分析,并以光降解有机污染物若丹明B为探针反应,考察其光催化性能。结果表明,质量比为1∶10的Fe_3O_4/TiO_2复合材料结构稳定、分散均匀,具有最优的光催化活性(波长356nm下反应3h,若丹明B降解率达到64.0%),并表现出良好的重复性。同时,动力学结果显示降解符合一级反应动力学。     

Fe2O3/Al2O3二元气凝胶合成高质量单壁纳米碳管

通过溶胶和超临界干燥方法制得了Fe₂O₃/Al₂O₃二元气凝胶，其比表面积和孔隙体积分别为246 m²·g^-1和1.89 cm³·g^-1，并具有较宽的孔径分布。以Fe₂O₃/Al₂O₃二元气凝胶作催化剂，通过甲烷催化裂解成功地合成了高质量的单壁纳米碳管。利用FESEM、TEM和HRTEM、Raman光谱等分析手段研究了反应温度对单壁纳米碳管生长的影响。结果表明在900 ℃时合成单壁纳米碳管的质量较高，并且合成的炭产物为毡状，该炭产物主要为高质量的单壁纳米碳管。     

浸渍-分解法制备高可见光催化活性的Bi2O3/TiO2纳米管阵列

用浸渍-分解法将Bi₂O₃纳米颗粒沉积在TiO₂纳米管壁上, 制备了Bi₂O₃/TiO₂纳米管阵列. 用电感耦合等离子体发射光谱(ICP-AES)测定了Bi₂O₃/TiO₂ 纳米管阵列的化学组分, 利用X 射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)和紫外-可见(UV-Vis)吸收光谱表征了所制备的样品. 通过在可见光下(λ>400 nm)降解甲基橙(MO)水溶液来评价样品的光催化活性. 结果表明, Bi₂O₃纳米颗粒均匀地沉积在TiO₂纳米管中. Bi₂O₃/TiO₂纳米管阵列具有比纯Bi₂O₃膜和N-TiO₂纳米管阵列高得多的可见光催化活性. Bi₂O₃/TiO₂纳米管阵列活性的增强是其强可见光吸收和Bi₂O₃与TiO₂之间形成的异质结的协同作用的结果.     

三维有序大孔复合材料Bi2O3/TiO2制备与多模式下光催化降解结晶紫

以TiO2为基体,在聚苯乙烯(PS)胶球和EO20PO70EO20(P123)两种模板剂作用下通过溶胶-凝胶及煅烧后处理方法制备了三维有序大孔纳米复合材料Bi2O3/TiO2.经傅里叶变换红外(FT-IR)光谱、X-射线衍射(XRD)、等离子体原子发射光谱(ICP-AES)、紫外-可见漫反射吸收光谱(UV-Vis DRS)、X-射线光电子能谱(XPS)、扫描电子显微镜(SEM)和N2吸附-脱附等物理测试手段对其组成、结构、形貌及表面物理化学性能进行了表征.结果表明,该复合材料晶型结构良好,孔结构排列整齐有序,孔壁呈介孔结构,属于三维有序大孔材料(3DOM).与TiO2相比,3DOM-Bi2O3/TiO2对光的吸收至少红移60 nm,且红移至可见区.在紫外光、可见光以及微波辅助等多模式光催化降解结晶紫的实验中,复合材料3DOM-Bi2O3/TiO2表现出良好的光催化活性,其活性明显高于P25、Bi2O3和Bi2O3/TiO2.同时,该复合材料针对不同类型的染料均表现出较好的紫外光降解效果,且3次循环实验后,依旧保持较高活性.     

Low temperature synthesis of Mn3O4 polyhedral nanocrystals and magnetic study

Manganese oxide (hausmannite) polyhedral nanocrystals were prepared by a microwave-assisted solution-based method using Mn(CH₃COO)₂ and (CH₂)₆N₄ at 80 °C. The as-prepared Mn₃O₄ nanocrystals were characterized by means of X-ray diffraction, field-emission transmission electron microscopy, field-emission scanning electron microscopy and Raman spectrum. Mn₃O₄ polyhedral nanocrystals prepared by microwave heating at 80 °C for 60 min were of cubic and rhombohedral shapes with the edge lengths in the range of 15-40 nm. Mn₃O₄ nanocrystals grew following the Ostwald ripening mechanism with increasing reaction time. High-resolution transmission electron microscopy and selected area electron diffraction confirm that the as-obtained polyhedral nanocrystals were single-crystalline. The magnetic behavior of Mn₃O₄ nanocrystals was studied. Mn₃O₄ nanocrystals show an obvious ferromagnetic behavior at low temperatures. The magnetic behavior of Mn₃O₄ nanocrystals was sensitive to crystal size. Ferromagnetic onset temperatures (T_c) of samples 1 and 3 are 40.6 and 41.1 K, respectively, lower than that observed for bulk Mn₃O₄ (42 K).     

Ti3+自掺杂的TiO2(A)/TiO2(R)/In2O3纳米异质结的制备与可见光催化性能

以TiCl_3和InCl_3为Ti源和In源,在不使用还原剂的条件下,首先通过液相沉淀反应制备前驱体沉淀,然后采用后续水热处理制备Ti~(3+)自掺杂的TiO_2(A)/TiO_2(R)/In_2O_3纳米异质结,考察了水热处理温度对材料结构和性能的影响。利用X射线衍射、透射电子显微镜、X射线光电子能谱和紫外-可见漫反射光谱对样品进行表征。分别以罗丹明B和苯酚溶液为模拟废水评价了样品的可见光催化降解性能。结果表明,与纯的TiO_2、In2O_3以及Ti~(3+)自掺杂的TiO_2相比,Ti~(3+)自掺杂的TiO_2(A)/TiO_2(R)/In_2O_3纳米异质结在可见光区有明显的吸收,并具有良好的可见光催化降解性能,200℃下水热处理24h所得样品光催化降解罗丹明B的反应速率常数(0.0444min-1)分别是纯TiO_2和In_2O_3的17.76倍和8.71倍。瞬态光电流时间响应结果表明样品的光催化性能主要来源于TiO_2(A)/TiO_2(R)/In_2O_3纳米异质结导致的提高的光生电子和空穴分离效率。     

环己酮肟气相Beckmann重排反应B2O3/TiO2-ZrO2催化剂的失活与再生

对环己酮肟气相Beckmann重排反应制己内酰胺B₂O₃/TiO₂-ZrO₂催化剂的失活原因和再生方法进行了研究。通过对失活催化剂进行N₂吸附、XRD、NH₃-TPD等表征后发现，引起催化剂失活的主要原因是催化剂表面因积炭所引起的酸性改变。失活催化剂在600℃于空气气氛中焙烧8h可完全恢复到新鲜催化剂的水平。     

掺杂Fe2O3对吸附相反应技术制备TiO2的形貌和光催化性能的影响

利用吸附相反应技术制备得到了掺杂不同浓度的Fe₂O₃的TiO₂复合光催化剂。通过透射电子显微镜(TEM)、紫外可见光谱和X射线衍射(XRD)研究不同掺杂浓度对TiO₂形貌和结晶过程的影响,并利用3种波长光源下的甲基橙光降解实验考评了各个复合光催化剂的催化活性。结果表明,掺杂后复合光催化剂中Fe₂O₃分散性较好较均匀。在TiO₂紫外可见吸收光谱中由于Fe₂O₃的掺杂而出现了红移,而且随着掺杂浓度增加红移越来越明显,复合光催化剂的禁带宽度也越来越小。在焙烧过程中无定形Fe₂O₃或Fe³⁺进入了TiO₂的晶格结构,从而抑制了TiO₂的结晶过程。半导体禁带宽度的减少以及TiO₂结晶过程的抑制作用,都导致紫外光下复合光催化剂催化活性的降低。但Fe₂O₃的掺杂也使得复合光催化剂在可见光区出现了一定的光催化活性。     

V2O5/TiO2催化剂表面结构FT-IR发射光谱研究(II)

用傅里哀变换红外发射光谱原位考察了V_2O_5/TiO_2催化剂在制备焙烧过程中担载偏钒酸铵的热分解步骤及其形成的表面活性相结构。偏钒酸铵在200 ℃左右分解, 在300 ℃之前完全转化为晶相V_2O_5。担载于TiO_2上的偏钒酸铵在100 ℃左右与TiO_2已产生强的化学作用, 在200 ℃之前已完全分解。对于10%(质量分数)V_2O_5/TiO_2催化剂其担载偏钒酸分解后在1020 cm~(-1)附近出现晶相V_2O_5的特征峰。但在500 ℃进一步焙烧后晶相V_5O_5的峰减弱并在1025—900 cm~(-1)区出现宽峰, 表明部分晶相V_2O_5可能转化为二维高分散的VO_x物种。2%(质量分数)V_2O_5/TiO_2催化剂在焙烧过程中也显示晶相V_2O_5的弱峰, 但同时也观察到属于VO_x物种的宽峰。进一步降低钒担载量, V_2O_5晶相特征峰逐渐消失, 而在1025—900 cm~(-1)区出现二维VO_x物种的宽峰。结果还表明傅里哀变换红外发射光谱是表征氧化物催化剂表面相结构的一种有力的方法。